Item 1A. Risk Factors
Investing in our common stock involves a high degree of risk. You should carefully consider the following risk factors and all other information contained in our Quarterly Report on Form 10-Q, including our consolidated financial statements and related notes. If any of the following risks actually occur, we may be unable to conduct our business as currently planned and our financial condition and results of operations could be seriously harmed. In addition, the trading price of our common stock could decline due to the occurrence of any of these risks and you may lose all or part of your investment. Except for those risk factors denoted by an asterisk (*), the risk factors facing our Company have not changed materially from those set forth in Part I, Item 1A of our Annual Report on Form 10-K for the year ended December 31, 2019, as filed with the SEC on February 28, 2020, which risk factors are set forth below.
Risks Inherent in Our Business
*We are dependent on our key customers for a significant portion of our revenue and the loss of, or a significant reduction in orders from, any of our key customers would adversely impact our revenue and results of operations.
We generate much of our revenue from a limited number of customers. For each year ended 2019, 2018 and 2017 and the three months ended March 31, 2020, our top ten customers represented 88.1%, 92.9%, 94.9% and 84.8% of our revenue, respectively. In 2019, Microsoft represented 32.2% of our revenue, Amazon represented 24.0% of our revenue, Facebook represented 10.9% of our revenue, and Cisco represented 10.0% of our revenue. As a result, the loss of, or a significant reduction in orders from any of our key customers would materially and adversely affect our revenue and results of operations. We typically do not have long-term contracts with our customers and instead rely on recurring purchase orders. However, many of our current revenue expectations and forecasts reflect significant anticipated orders from a limited number of key customers. If our key customers do not continue to purchase our existing products or fail to purchase additional products from us, our revenue would decline and our results of operations would be adversely affected.
Adverse events affecting our key customers could also negatively affect our ability to retain their business and obtain new purchase orders, which could adversely affect our revenue and results of operations. For example, in recent years, there has been consolidation among various network equipment manufacturers and this trend is expected to continue. We are unable to predict the impact that industry consolidation would have on our existing or potential customers. We may not be able to offset any potential decline in revenue arising from the consolidation of our existing customers with revenue from new customers or additional revenue from the merged company.
Customer demand is difficult to forecast accurately and, as a result, we may be unable to match production with customer demand.
We make planning and spending decisions, including determining the levels of business that we will seek and accept, production schedules, component procurement commitments, personnel needs and other resource requirements, based on our estimates of product demand and customer requirements. Our products are typically purchased pursuant to individual purchase orders. While our customers may provide us with their demand forecasts, they are typically not contractually committed to buy any quantity of products beyond firm purchase orders. Furthermore, many of our customers may increase, decrease, cancel or delay purchase orders already in place without significant penalty. The short-term nature of commitments by our customers and the possibility of unexpected changes in demand for their products reduce our ability to accurately estimate future customer requirements. On occasion, customers may require rapid increases in production, which can strain our resources, cause our manufacturing to be negatively impacted by materials shortages, necessitate more onerous procurement commitments and reduce our gross margin. We may not have sufficient capacity at any given time to meet the volume demands of our customers, or one or more of our suppliers may not have sufficient capacity at any given time to meet our volume demands. If any of our major customers decrease, stop or delay purchasing our products for any reason, we will likely have excess manufacturing capacity or inventory and our business and results of operations would be harmed.
If our customers do not qualify our products for use on a timely basis, our results of operations may suffer.
Prior to the sale of new products, our customers typically require us to “qualify” our products for use in their applications. At the successful completion of this qualification process, we refer to the resulting sales opportunity as a “design win.” Additionally, new customers often audit our manufacturing facilities and perform other evaluations during this qualification process. The qualification process involves product sampling and reliability testing and collaboration with our product management and engineering teams in the design and manufacturing stages. If we are unable to accurately predict the amount of time required to qualify our products with customers, or are unable to qualify our products with certain customers at all, then our ability to generate revenue could be delayed or our revenue would be lower than expected and we may not be able to recover the costs associated with the qualification process or with our product development efforts, which would have an adverse effect on our results of operations.
In addition, due to rapid technological changes in our markets, a customer may cancel or modify a design project before we have qualified our product or begun volume manufacturing of a qualified product. It is unlikely that we would be able to recover the expenses for cancelled or unutilized custom design projects. Some of these unrecoverable expenses for cancelled or unutilized custom design projects may be significant. It is difficult to predict with any certainty whether our customers will delay or terminate product qualification or the frequency with which customers will cancel or modify their projects, but any such delay, cancellation or modification would have a negative effect on our results of operations.
Our ability to successfully qualify and scale capacity for new technologies and products is important to our ability to grow our business and market presence, and we may invest a significant amount to scale our capacity to meet potential demand from customers for our new technologies and products. If we are unable to qualify and sell any of our new products in volume, on time, or at all, our results of operations may be adversely affected.
We face intense competition which could negatively impact our results of operations and market share.
The markets into which we sell our products are highly competitive. Our competitors range from large, international companies offering a wide range of products to smaller companies specializing in niche markets. Current and potential competitors may have substantially greater name recognition, financial, marketing, research and manufacturing resources than we do, and there can be no assurance that our current and future competitors will not be more successful than us in specific product lines or markets. Some of our competitors may also have better-established relationships with our current or potential customers. Some of our competitors have more resources to develop or acquire new products and technologies and create market awareness for their products and technologies. In addition, some of our competitors have the financial resources to offer competitive products at below-market pricing levels that could prevent us from competing effectively and result in a loss of sales or market share or cause us to lower prices for our products. In recent years, there has been consolidation in our industry and we expect such consolidation to continue. Consolidation involving our competitors could result in even more intense competition. Network equipment manufacturers, who are our customers, and network service providers may decide to manufacture the optical subsystems incorporated into their network systems in-house instead of outsourcing such products to companies such as us. We also encounter potential customers that, because of existing relationships with our competitors, are committed to the products offered by our competitors.
We must continually develop successful new products and enhance existing products, and if we fail to do so or if our release of new or enhanced products is delayed, our business may be harmed.
The markets for our products are characterized by frequent new product introductions, changes in customer requirements and evolving industry standards, all with an underlying pressure to reduce cost and meet stringent reliability and qualification requirements. Our future performance will depend on our successful development, introduction and market acceptance of new and enhanced products that address these challenges. If we are unable to make our new or enhanced products commercially available on a timely basis, we may lose existing and potential customers and our financial results would suffer.
In addition, due to the costs and length of research, development and manufacturing process cycles, we may not recognize revenue from new products until long after such expenditures, if at all, and our margins may decrease if our costs are higher than expected, adversely affecting our financial condition and results of operations.
Although the length of our product development cycle varies widely by product and customer, it may take 18 months or longer before we receive our first order. As a result, we may incur significant expenses long before customers accept and purchase our products.
Product development delays may result from numerous factors, including:
|
●
|
modification of product specifications and customer requirements;
|
|
●
|
unanticipated engineering complexities;
|
|
●
|
difficulties in reallocating engineering resources and overcoming resource limitations; and
|
|
●
|
rapidly changing technology or competitive product requirements.
|
The introduction of new products by us or our competitors and other changes in our customer’s demands could result in a slowdown in demand for our existing products and could result in a write-down in the value of our inventory. We have in the past experienced periodic fluctuations in demand for existing products and delays in new product development, and such fluctuations will likely occur in the future. To the extent we fail to qualify our products and obtain their approval for use, which we refer to as a design win, or experience product development delays for any reason, our competitive position would be adversely affected and our ability to grow our revenue would be impaired.
Furthermore, our ability to enter a market with new products in a timely manner can be critical to our success because it is difficult to displace an existing supplier for a particular type of product once a customer has chosen a supplier, even if a later-to-market product provides better performance or cost efficiency.
The development of new, technologically advanced products is a complex and uncertain process requiring frequent innovation, highly-skilled engineering and development personnel and significant capital, as well as the accurate anticipation of technological and market trends. We cannot assure you that we will be able to identify, develop, manufacture, market or support new or enhanced products successfully or on a timely basis. Further, we cannot assure you that our new products will gain market acceptance or that we will be able to respond effectively to product introductions by competitors, technological changes or emerging industry standards. We also may not be able to develop the underlying core technologies necessary to create new products and enhancements, license these technologies from third parties, or remain competitive in our markets.
Our revenues, growth rates and operating results are likely to fluctuate significantly as a result of factors that are outside our control, which could adversely impact our operating results.
Our revenues, growth rates and operating results are likely to fluctuate significantly in the future as a result of factors that are outside our control. We may not achieve similar revenues, growth rates or operating results in future periods. Our revenues, growth rates and operating results for any prior quarterly or annual period should not be relied upon as any indication of our future revenues, growth rates or operating results. The timing of order placement, size of orders and satisfaction of contractual customer acceptance criteria, changes in the pricing of our products due to competitive pressures as well as order or shipment delays or deferrals, with respect to our products, may cause material fluctuations in revenues. Our lengthy sales cycle, which may extend to more than one year, may cause our revenues and operating results to vary from period to period and it may be difficult to predict the timing and amount of any variation. Delays or deferrals in purchasing decisions by our customers may increase as we develop new or enhanced products for existing and new markets, including automotive and biotechnology markets. Our current and anticipated future dependence on a small number of customers increases the revenue impact of each such customer’s decision to delay or defer purchases from us, or decision not to purchase products from us. Our expense levels in the future will be based, in large part, on our expectations regarding future revenue sources and, as a result, operating results for any quarterly period in which anticipated material orders fail to occur, or are delayed or deferred, could be significantly harmed.
Continued tension in U.S.-China trade relations may adversely impact our business and operating results.
The U.S. government has recently made statements and amended its U.S. trade policies, resulting in tariffs that affect imported products manufactured in China, by our Chinese subsidiary. In addition, the Chinese government has imposed reciprocal tariffs that affect products manufactured by our U.S. operations. The additional tariffs have increased our cost of goods sold, however we believe that the negative impact of these tariffs has not been material to our financial results. Although we cannot predict the impact of any future tariffs, we intend to continue to adjust our manufacturing processes, supplier lists, and manufacturing locations in order to minimize the impact of any tariffs on both AOI and our customers.
It is unknown whether and to what extent additional new tariffs (or other new laws or regulations) will be adopted that increase the cost of importing and/or exporting products to or from the United States, or from China to the United States. Furthermore, it is unknown what effect that any such new tariffs or retaliatory actions would have on us or our industry and customers. As additional new tariffs, legislation and/or regulations are implemented, or if existing trade agreements are renegotiated or if China or other affected countries take retaliatory trade actions, such changes could have a material adverse effect on our business, financial condition, results of operations or cash flows.
We are subject to the cyclical nature of the markets in which we compete and any future downturn will likely reduce demand for our products and revenue.
In each of our target markets, including the CATV market, our sales depend on the aggregate capital expenditures of service providers as they build out and upgrade their network infrastructure. These markets are highly cyclical and characterized by constant and rapid technological change, price erosion, evolving standards and wide fluctuations in product supply and demand. In the past, these markets have experienced significant downturns, often connected with, or in anticipation of, the maturation of product cycles. These downturns have been characterized by diminished product demand, production overcapacity, high inventory levels and accelerated erosion of average selling prices. Our historical results of operations have been subject to these cyclical fluctuations, and we may experience substantial period to period fluctuations in our future results of operations. Any future downturn in any of the markets in which we compete could significantly reduce the demand for our products and therefore may result in a significant reduction in our revenue. Our revenue and results of operations may be materially and adversely affected in the future due to changes in demand from individual customers or cyclical changes in any of the markets utilizing our products. We may not be able to accurately predict these cyclical fluctuations and the impact that these fluctuations may have on our revenue and operating results.
If we encounter manufacturing problems, we may lose sales and damage our customer relationships.
We may experience delays, disruptions or quality control problems in our manufacturing operations. These and other factors may cause less than acceptable yields at our facility. Manufacturing yields depend on a number of factors, including the quality of available raw materials, the degradation or change in equipment calibration and the rate and timing of the introduction of new products. Changes in manufacturing processes required as a result of changes in product specifications, changing customer needs and the introduction of new product lines may significantly reduce our manufacturing yields, resulting in low or negative margins on those products. In addition, we use our Molecular Beam Epitaxy, or MBE, fabrication process to make our lasers, in addition to Metal Organic Chemical Vapor Deposition, or MOCVD, the technique most commonly used in optical manufacturing by communications optics vendors, and our MBE fabrication process relies on custom-manufactured equipment. If our MBE or MOCVD fabrication facility in Sugar Land, Texas were to be damaged or destroyed for any reason, our manufacturing process would be severely disrupted. Any such manufacturing problems would likely delay product shipments to our customers. For example, shipments of certain of our 100 Gbps transceiver products to one of our customers decreased during the three months ended September 30, 2018 due to customer concerns about failures of similar products shipped previously. Although we conducted extensive testing of our products to demonstrate that any potentially affected units could be nearly eliminated from future shipments, and we subsequently resumed shipments with the customer’s agreement, we did incur additional testing costs and costs to enhance the ongoing monitoring of product quality which adversely affected the results of our operations. It is unclear the extent to which our reputation with this customer, or other customers, may have been affected. Manufacturing problems and any such delays would negatively affect our sales and revenue and could negatively affect our competitive position and reputation. We may also experience delays in production, typically in February, during the Lunar New Year holiday when our facilities in China and Taiwan are closed.
Given the high fixed costs associated with our vertically integrated business, a reduction in demand for our products will likely adversely impact our gross profits and our results of operations.
We have a high fixed cost base due to our vertically integrated business model, including the fact that 2,719 of our employees as of December 31, 2019 were employed in manufacturing and research and development operations. We may not be able to adjust these fixed costs quickly to adapt to rapidly changing market conditions. Our gross profit and gross margin are greatly affected by our sales volume and volatility on a quarterly basis and the corresponding absorption of fixed manufacturing overhead expenses. In addition, because we are a vertically integrated manufacturer, insufficient demand for our products may subject us to the risk of high inventory carrying costs and increased inventory obsolescence. Given our vertical integration, the rate at which we turn inventory has historically been low when compared to our cost of sales. We do not expect this to change significantly in the future and believe that we will have to maintain a relatively high level of inventory compared to our cost of sales. As a result, we continue to expect to have a significant amount of working capital invested in inventory. We may be required to write down inventory costs in the future and our high inventory costs may have an adverse effect on our gross profits and our results of operations.
Increasing costs and shifts in product mix may adversely impact our gross margins.
Our gross margins on individual products and among products fluctuate over each product’s life cycle. Our overall gross margins have fluctuated from period to period as a result of shifts in product mix, the introduction of new products, decreases in average selling prices and our ability to reduce product costs, and these fluctuations are expected to continue in the future. We may not be able to accurately predict our product mix from period to period, and as a result we may not be able to forecast accurately our overall gross margins. The rate of increase in our costs and expenses may exceed the rate of increase in our revenue, either of which would materially and adversely affect our business, our results of operations and our financial condition.
Epidemic diseases, or the perception of their effects, could have a material adverse effect on our business, financial condition, results of operation, or cash flows.
Outbreaks of epidemic, pandemic, or contagious diseases, such as the recent novel coronavirus or, historically, the Ebola virus, Middle East Respiratory Syndrome, Severe Acute Respiratory Syndrome, or the H1N1 virus, could divert medical resources and priorities towards the treatment of that disease. Business disruptions could include disruptions or restrictions on our ability to travel or to distribute our products, as well as temporary closures of our facilities or the facilities of our suppliers and their contract manufacturers. Any disruption of our suppliers and their contract manufacturers or our customers would likely impact our sales and operating results. In addition, a significant outbreak of epidemic, pandemic, or contagious diseases in the human population could result in a widespread health crisis that could adversely affect the economies and financial markets of many countries, resulting in an economic downturn that could affect demand for our products. Any of these events could have a material adverse effect on our business, financial condition, results of operations, or cash flows. For example, as a result of the extension of the Lunar New Year holidays due to the recent outbreak of novel coronavirus originating in Wuhan, China, certain of our product shipments from China have been delayed. Although we are monitoring the situation on a daily basis, it is currently unknown whether the outbreak will continue to disrupt our product shipments or impact manufacturing in the region or other regions where we operate over a prolonged period. If such disruption were to extend over a prolonged period, it could have a material impact on our revenues and our business. Any disruption resulting from similar events on a larger scale or over a prolonged period could cause significant delays in shipments of our products until we are able to resume such shipments, or shift our manufacturing, assembly, or test from the affected contractor to another third-party vendor, if needed. There can be no assurance that alternative capacity could be obtained on favorable terms, if at all.
* The extent to which the coronavirus ("COVID-19") pandemic impacts our business, results of operations and financial condition is uncertain and will depend on future developments, which cannot be predicted.
The spread of the COVID-19 virus during the first quarter of 2020 has caused an economic downturn on a global scale, as well as significant volatility in the financial markets. In March 2020 the World Health Organization declared the spread of the COVID-19 virus a pandemic. Our operations have been negatively impacted by the pandemic and are likely to continue to be impacted. The extent and duration of this impact is uncertain and will depend on factors including the extent to which our customers' businesses are impacted by the pandemic. In order to protect our employees and also minimize the risk of potential disruptions to our business that could occur should a virus outbreak occur in one of our facilities, we have established and implemented a work from home provision for our employees, where possible. We have also modified our business practices (including employee travel, and cancellation of physical participation in meetings, events and conferences), and we may take further actions as may be required by government authorities or that we determine are in the best interests of our employees, customers and business partners. However, even with these precautions, it is not possible to eliminate the risk of a widespread outbreak among our employees and if such an outbreak were to occur, it would likely have a negative impact on our business, results of operations, and our financial condition.
The impact of the COVID-19 pandemic continues to unfold. The extent of the pandemic’s effect on our operational and financial performance will depend in large part on future developments, which cannot be predicted with confidence at this time. Future developments include the duration, scope and severity of the pandemic, the actions taken to contain or mitigate its impact, the impact on governmental programs and budgets, the development of treatments or vaccines, and the resumption of widespread economic activity. Due to the inherent uncertainty of the unprecedented and rapidly evolving situation, we are unable to predict with any confidence the likely impact of the COVID-19 pandemic on our future operations.
If the CATV market does not continue to develop as we expect, or if there is any downturn in this market, our business would be adversely affected.
Historically, we have generated much of our revenue from the CATV market. In 2019, 2018 and 2017, the CATV market represented 19.6%, 19.3%, and 15.9% of our revenue, respectively. In the CATV market, we are relying on expected increasing demand for bandwidth-intensive services and applications such as on-demand television programs, high-definition television channels, or HDTV, social media, peer-to-peer file sharing and online video creation and viewing from network service providers. Without network and bandwidth growth, the need for our products will not increase and may decline, adversely affecting our financial condition and results of operations. Although demand for broadband access is increasing, network and bandwidth growth may be limited by several factors, including an uncertain regulatory environment, high infrastructure costs to purchase and install equipment and uncertainty as to which competing content delivery solution, such as telecoms, wireless or satellite, will gain the most widespread acceptance. If the trend of outsourcing for the design and manufacture of CATV equipment does not continue, or continues at a slower pace than currently expected, our customers’ demand for our design and manufacturing services may not grow as quickly as expected. If expectations for the growth of the CATV market are not realized, our financial condition and results of operations will be adversely affected. In addition, if the CATV market is adversely impacted, whether due to competitive pressure from telecomn service providers, regulatory changes, or otherwise, our business would be adversely affected. We may not be able to offset any potential decline in revenue from the CATV market with revenue from new customers in other markets.
We have limited operating history in the telecom and FTTH markets, and our business could be harmed if these markets do not develop as we expect.
For 2019 and 2018, respectively, we generated 4.4% and 4.9% of our revenue from the telecom market and 0.1% and 0.3% of our revenue from the FTTH market. In the telecom market, we generally have sold products that were originally designed for other markets (such as internet data center or FTTH) or are variations of such products. As we gain experience in this market, we have begun to develop products specifically designed for telecom customers. Given our limited experience in this market, the products that we develop may prove to be unsuitable for customer use, or we may be unable to derive profit margins from this market that are similar to what we derive from our other markets. The products that we offer in the FTTH market are relatively new and have not yet gained widespread customer acceptance. For example, our WDM-PON products designed for the FTTH market, have not, and may never, gain widespread acceptance by large internet service providers. Our business in this market is dependent on the deployment of our optical components, modules and subassemblies. We are relying on increasing demand for bandwidth-intensive services and telecoms service providers’ acceptance and deployment of WDM-PON as a technology supporting 1 Gbps service to the home. Without network and bandwidth growth and adoption of our solutions by operators in these markets, we will not be able to sell our products in these markets in high volume or at our targeted margins, which would adversely affect our financial condition and results of operations. For example, WDM-PON technology may not be adopted by equipment and service providers in the FTTH market as rapidly as we expect or in the volumes we need to achieve acceptable margins. Network and bandwidth growth may be limited by several factors, including an uncertain regulatory environment, high infrastructure costs to purchase and install equipment and uncertainty as to which competing content delivery solution, such as CATV, will gain the most widespread acceptance. In addition, as we enter new markets or expand our product offerings in existing markets, our margins may be adversely affected due to competition in those markets and commoditization of competing products. If our expectations for the growth of these markets are not realized, our financial condition and results of operations will be adversely affected.
Our financial results may vary significantly from quarter-to-quarter due to a number of factors, which may lead to volatility in our stock price.
Our quarterly revenue and operating results have varied in the past and will likely continue to vary significantly from quarter-to-quarter. This variability may lead to volatility in our stock price as research analysts and investors respond to these quarterly fluctuations. These fluctuations are due to numerous factors, including:
|
●
|
the timing, size and mix of sales of our products;
|
|
●
|
fluctuations in demand for our products, including the increase, decrease, rescheduling or cancellation of significant customer orders;
|
|
●
|
our ability to design, manufacture and deliver products which meet customer requirements in a timely and cost-effective manner;
|
|
●
|
new product introductions and enhancements by us or our competitors;
|
|
●
|
the gain or loss of key customers;
|
|
●
|
the rate at which our present and potential customers and end users adopt our technologies;
|
|
●
|
changes in our pricing and sales policies or the pricing and sales policies of our competitors;
|
|
●
|
seasonality of certain of our products and manufacturing capabilities;
|
|
●
|
quality control or yield problems in our manufacturing operations;
|
|
●
|
supply disruption for certain raw materials and components used in our products;
|
|
●
|
capacity constraints of our outside contract manufacturers for a portion of the manufacturing process for some of our products;
|
|
●
|
length and variability of the sales cycles of our products;
|
|
●
|
unanticipated increases in costs or expenses;
|
|
●
|
the loss of key employees;
|
|
●
|
different capital expenditure and budget cycles for our customers, affecting the timing of their spending for our products;
|
|
●
|
political stability in the areas of the world in which we operate;
|
|
●
|
fluctuations in foreign currency exchange rates;
|
|
●
|
changes in accounting rules;
|
|
●
|
changes in or limitations imposed by trade protection laws or other regulatory orders or requirements in the United States or in other countries, including tariffs, sanctions, or other costs, restrictions, or requirements which may affect our ability to import or export our products to or from various countries;
|
|
●
|
trade-related government actions that impose barriers or restrictions that would impact our ability to sell or ship products to Huawei or other customers;
|
|
●
|
the evolving and unpredictable nature of the markets for products incorporating our solutions; and
|
|
●
|
general economic conditions and changes in such conditions specific to our target markets.
|
The foregoing factors are difficult to forecast, and these, as well as other factors, could materially adversely affect our quarterly and annual operating results. In addition, a significant amount of our operating expenses is relatively fixed in nature due to our internal manufacturing, research and development, sales and general administrative efforts. Any failure to adjust spending quickly enough to compensate for a revenue shortfall could magnify the adverse impact of such revenue shortfall on our results of operations. For these reasons, you should not rely on quarter-to-quarter comparisons of our results of operations as an indicator of future performance. Moreover, our operating results may not meet our announced guidance or the expectations of research analysts or investors, in which case the price of our common stock could decrease significantly. There can be no assurance that we will be able to successfully address these risks.
*Our indebtedness and liabilities could limit the cash flow available for our operations, expose us to risks that could adversely affect our business, financial condition and results of operations and impair our ability to satisfy our obligations under our indebtedness.
As of March 31, 2020, we had approximately $140.2 million of consolidated indebtedness. We may also incur additional indebtedness to meet future financing needs. Our indebtedness could have significant negative consequences for our security holders and our business, results of operations and financial condition by, among other things:
|
●
|
increasing our vulnerability to adverse economic and industry conditions;
|
|
|
|
|
●
|
limiting our ability to obtain additional financing;
|
|
|
|
|
●
|
requiring the dedication of a substantial portion of our cash flow from operations to service our indebtedness, which will reduce the amount of cash available for other purposes;
|
|
|
|
|
●
|
limiting our flexibility to plan for, or react to, changes in our business;
|
|
|
|
|
●
|
diluting the interests of our existing stockholders as a result of issuing shares of our common stock upon conversion of the Notes; and
|
|
|
|
|
●
|
placing us at a possible competitive disadvantage with competitors that are less leveraged than us or have better access to capital.
|
Our business may not generate sufficient funds, and we may otherwise be unable to maintain sufficient cash reserves, to pay amounts due under our indebtedness, including the Notes, and our cash needs may increase in the future. In addition, our existing Credit Facility with Truist Bank, contains, and any future indebtedness that we may incur may contain, financial and other restrictive covenants that limit our ability to operate our business, raise capital or make payments under our other indebtedness. If we fail to comply with these covenants or to make payments under our indebtedness when due, then we would be in default under that indebtedness, which could, in turn, result in that and our other indebtedness becoming immediately payable in full.
*Our Paycheck Protection Program loan may not be forgiven and could subject us to enhanced scrutiny
On April 17, 2020, we were granted a loan of $6.2 million under the Paycheck Protection Program ("PPP"), which is a component of the Coronavirus Aid, Relief, and Economic Security ("CARES") Act. This program was implemented hastily in response to the unprecedented economic downturn related to the coronavirus, and provides for loans of up to $10 million for eligible small businesses (defined generally as businesses with less than 500 U.S. resident employees). Due to the speed of implementation of this program, official guidance and interpretations of the requirements of the program have been limited and have changed over time. On April 29, the U.S. Department of the Treasury updated its "Frequently Asked Questions" (FAQ) document regarding the PPP program to indicate its intention to review all loans obtained under the program that exceed $2 million.
We have diligently considered all known guidance and determined that we meet all the requirements for the program, however we cannot predict with certainty how such a review might be conducted or what new information or interpretations might emerge prior to the completion of the review. As such, we cannot be certain whether our loan may be forgiven, even if we meet the currently-understood requirements for forgiveness. The review could also subject us to additional scrutiny which could adversely affect our financial condition and results of operations.
We depend on key personnel to develop and maintain our technology and manage our business in a rapidly changing market.
The continued services of our executive officers and other key engineering, sales, marketing, manufacturing and support personnel is essential to our success. For example, our ability to achieve new design wins depends upon the experience and expertise of our engineers. Any of our key employees, including our Chief Executive Officer, Chief Financial Officer, Senior Vice President and North America General Manager and Senior Vice President and Asia General Manager, may resign at any time. We do not have key person life insurance policies covering any of our employees. To implement our business plan, we also intend to hire additional employees, particularly in the areas of engineering, manufacturing and sales. Our ability to continue to attract and retain highly skilled employees is a critical factor in our success. Competition for highly skilled personnel is intense. We may not be successful in attracting, assimilating or retaining qualified personnel to satisfy our current or future needs. Our ability to develop, manufacture and sell our products, and thus our financial condition and results of operations, would be adversely affected if we are unable to retain existing personnel or hire additional qualified personnel.
We depend on a limited number of suppliers and any supply interruption could have an adverse effect on our business.
We depend on a limited number of suppliers for certain raw materials and components used in our products. Some of these suppliers could disrupt our business if they stop, decrease or delay shipments or if the materials or components they ship have quality or reliability issues. Some of the raw materials and components we use in our products are available only from a sole source or have been qualified only from a single supplier. Furthermore, other than our current suppliers, there are a limited number of entities from whom we could obtain certain materials and components. We may also face shortages if we experience increased demand for materials or components beyond what our qualified suppliers can deliver. Our inability to obtain sufficient quantities of critical materials or components could adversely affect our ability to meet demand for our products, adversely affecting our financial condition and results of operations.
We typically have not entered into long-term agreements with our suppliers and, therefore, our suppliers could stop supplying materials and components to us at any time or fail to supply adequate quantities of materials or components to us on a timely basis. It is difficult, costly, time consuming and, on short notice, sometimes impossible for us to identify and qualify new suppliers. Our customers generally restrict our ability to change the components in our products. For more critical components, any changes may require repeating the entire qualification process. Our reliance on a limited number of suppliers or a single qualified vendor may result in delivery and quality problems, and reduced control over product pricing, reliability and performance.
We depend upon outside contract manufacturers for a portion of the manufacturing process for some of our products.
Almost all of our products are manufactured internally. However, we also rely upon manufacturers in China, Taiwan and other Asia locations to provide back-end manufacturing and produce the finished portion of a few of our products. Our reliance on a contract manufacturer for these products makes us vulnerable to possible capacity constraints and reduced control over delivery schedules, manufacturing yields, manufacturing quality/controls and costs. If one or more of our contract manufacturers is unable to meet our customer demand in a timely fashion, this could have a material adverse effect on the revenue from our products. If one or more contract manufacturers for one of our products was unable or unwilling to manufacture such product in required volumes and at high quality levels or to continue our existing supply arrangement, we would have to identify, qualify and select an acceptable alternative contract manufacturer or move these manufacturing operations to our internal manufacturing facilities. An alternative contract manufacturer may not be available to us when needed or may not be in a position to satisfy our quality or production requirements on commercially reasonable terms, including price. Any significant interruption in manufacturing our products would require us to reduce our supply of products to our customers, which in turn, would reduce our revenue, harm our relationships with the customer of these products and cause us to forego potential revenue opportunities.
Our products could contain defects that may cause us to incur significant costs or result in a loss of customers.
Our products are complex and undergo quality testing as well as formal qualification by our customers. Our customers’ testing procedures are limited to evaluating our products under likely and foreseeable failure scenarios and over varying amounts of time. For various reasons, such as the occurrence of performance problems that are unforeseeable in testing or that are detected only when products age or are operated under peak stress conditions, our products may fail to perform as expected long after customer acceptance. Failures could result from faulty components or design, problems in manufacturing or other unforeseen reasons. Any such failures could delay product shipments to our customers or result in a loss of customers. For example, shipments of certain of our 100 Gbps transceiver products to one of our customers decreased during the three months ended September 30, 2018 due to customer concerns about failures of similar products shipped previously. As a result, we could incur significant costs to repair or replace defective products under warranty, particularly when such failures occur in installed systems. Our products are typically embedded in, or deployed in conjunction with, our customers’ products, which incorporate a variety of components, modules and subsystems and may be expected to interoperate with modules produced by third parties. As a result, not all defects are immediately detectable and when problems occur, it may be difficult to identify the source of the problem. We face this risk because our products are widely deployed in many demanding environments and applications worldwide. In addition, we may in certain circumstances honor warranty claims after the warranty has expired or for problems not covered by warranty to maintain customer relationships. Any significant product failure could result in litigation, damages, repair costs and lost future sales of the affected product and other products, divert the attention of our engineering personnel from our product development efforts and cause significant customer relations problems, all of which would harm our business. Although we carry product liability insurance, this insurance may not adequately cover our costs arising from defects in our products or otherwise.
Our loan agreements contain restrictive covenants that may adversely affect our ability to conduct our business.
We have lending arrangements with several financial institutions, including loan agreements with Truist Bank in the U.S., credit facilities with Taishin International Bank and Far Eastern International Bank., equipment finance agreements with Chailease Finance Co., Ltd. in Taiwan and credit facilities with China Merchants Bank Co. Ltd., Shanghai Pudong Development Bank Co., Ltd. and China Zheshang Bank Co., Ltd. in China. Our loan agreements governing our long-term debt obligations in the U.S. and Asia contain certain financial and operating covenants that limit our management’s discretion with respect to certain business matters. Among other things, these covenants require us to maintain certain financial ratios and restrict our ability to incur additional debt, create liens or other encumbrances, change the nature of our business, sell or otherwise dispose of assets and merge or consolidate with other entities. In addition, the Indenture governing the Notes contains covenants that limit our ability and the ability of our subsidiaries to, among other things: (i) incur or guarantee additional indebtedness or issue disqualified stock; and (ii) create or incur liens. These restrictions may limit our flexibility in responding to business opportunities, competitive developments and adverse economic or industry conditions. Any failure by us or our subsidiaries to comply with these agreements could harm our business, financial condition and operating results. In addition, our obligations under our loan agreements with Truist Bank are secured by our accounts receivable, inventory, intellectual property, and all business assets including real estate and equipment. Our credit facilities with Shanghai Pudong Development Bank Co., Ltd. and China Zheshang Bank Co., Ltd. are secured by real estate. A breach of any of covenants under our loan agreements, or a failure to pay interest or indebtedness when due under any of our credit facilities could result in a variety of adverse consequences, including the acceleration of our indebtedness.
We may not be able to obtain additional capital when desired, on favorable terms or at all.
We operate in a market that makes our prospects difficult to evaluate and, to remain competitive, we will be required to make continued investments in capital equipment, facilities and technological improvements. We expect that substantial capital will be required to expand our manufacturing capacity and fund working capital for anticipated growth. If we do not generate sufficient cash flow from operations or otherwise have the capital resources to meet our future capital needs, we may need additional financing to implement our business strategy, which includes:
|
●
|
expansion of research and development;
|
|
●
|
expansion of manufacturing capabilities;
|
|
●
|
hiring of additional technical, sales and other personnel; and
|
|
●
|
acquisitions of complementary businesses.
|
If we raise additional funds through the issuance of our common stock or convertible securities, the ownership interests of our stockholders could be significantly diluted. These newly issued securities may have rights, preferences or privileges senior to those of existing stockholders. Additional financing may not, however, be available on terms favorable to us, or at all, if and when needed, and our ability to fund our operations, take advantage of unanticipated opportunities, develop or enhance our infrastructure or respond to competitive pressures could be significantly limited. If we cannot raise required capital when needed, including under our Registration Statement filed with the SEC in October 2019, we may be unable to meet the demands of existing and prospective customers, adversely affecting our sales and market opportunities and consequently our business, financial condition and results of operations.
Data breaches and cyberattacks could compromise our operations, our customers’ operations, or the operations of our contract manufacturers upon whom we rely, and cause significant damage to our business and reputation.
Cyberattacks have become more prevalent and much harder to detect and defend against. Companies, including companies in our industry, have been increasingly subject to a wide variety of security incidents, cyberattacks and other attempts to gain unauthorized access to their systems or to deny access and disrupt their systems and operations. These threats can come from a variety of sources, ranging in sophistication from an individual hacker to a state-sponsored attack. Cyber threats may be generic, or they may be custom-crafted against our information systems.
In the ordinary course of our business, we and our data center customers maintain sensitive data on our respective networks, including intellectual property, employee personal information and proprietary or confidential business information relating to our business and that of our customers and business partners. The secure maintenance of this information is critical to our business and reputation. Despite our implementation of network security measures, our network and storage applications have been subject to computer viruses, ransomware and other forms of cyber terrorism.
Also, despite our implementation of security measures, we are not able to guarantee that we can prevent unauthorized access by hackers or breaches due to operator error, malfeasance or other system disruptions. Our customers’ network and storage applications may be subject to similar disruptions. It is often difficult to anticipate or immediately detect such incidents and the damage caused by such incidents. Data breaches and any unauthorized access or disclosure of our information, employee information or intellectual property could compromise our business, trade secrets and other sensitive business information, any of which could result in legal action against us, exposure of our intellectual property to our competitors, damages, fines and other adverse effects. A data security breach could also lead to public exposure of personal information of our employees, customers and others. Any such theft, loss or misuse of personal data collected, used, stored or transferred by us to run our business could result in significantly increased security costs or costs related to defending legal claims. Cyberattacks, such as computer viruses or other forms of cyber terrorism, have disrupted access to some of our network or storage applications. In past incidents we have been able to recover quickly without material financial impact, however such disruptions in the future may result in delays or cancellations of customer orders or delays or additional costs to produce and ship our products. Data security breaches involving our data center customers could affect their financial condition and ability to continue to purchase our products. Further, cyberattacks may cause us to incur significant remediation costs, result in product development delays, disrupt key business operations and divert attention of management and key information technology resources. These incidents could also subject us to liability, expose us to significant expense and cause significant harm to our reputation and business.
*Changes in U.S. and international trade policies, particularly with regard to China, may materially and adversely impact our business and operating results.
The U.S. government continues to make public statements in conjunction with certain actions that have led and may lead to further changes to U.S. and international trade policies, including additional tariffs affecting certain products manufactured in China. Since the beginning of 2018, there has been increasing rhetoric, in some cases coupled with legislative or executive action, from several U.S. and foreign leaders regarding the possibility of instituting tariffs on the foreign imports of certain materials. Five rounds of U.S. tariffs on imports from China (respectively the “U.S. Tariffs on China Imports”) went into effect on July 2018, August 2018, September 2018, September 2019, and February 2020. A limited number of our products that are of Chinese origin are currently subject to the U.S. Tariffs on China Imports.
It is unknown whether and to what extent new tariffs (or other new laws or regulations) will be adopted, or the effect that any such actions would have on us or our industry. A significant portion of our manufacturing operations are based in Ningbo, China; therefore, there could be material adverse effects on our business, financial condition, and/or cash flow if any new tariffs, legislation and/or regulations are implemented, or if existing trade agreements are renegotiated or if China or other affected countries take further retaliatory trade actions.
Furthermore, the implementation of trade tariffs both globally and between the U.S. and China specifically carries the risk of negatively impacting China’s overall economic condition, which could have negative repercussions on our business. Bilateral tariffs could cause a decrease in the sales of our products to customers located in China or other customers selling to Chinese end users, further impacting our business.
Significant changes to existing international trade agreements could also lead to sourcing or logistics disruption resulting from import delays or the imposition of increased tariffs on our sourcing partners. For example, the Chinese government could, among other things, require the use of local suppliers, compel companies that do business in China to partner with local companies, and otherwise provide government incentives or subsidies to government-backed local customers to buy from local suppliers. Changes in, and responses to, U.S. trade policy could reduce the competitiveness of our products and thus cause our sales and revenues to drop, which could materially and adversely impact our business and results of operations.
We face a variety of risks associated with our international sales and operations.
We currently derive, and expect to continue to derive, a significant portion of our revenue from sales to international customers. In 2019, 2018 and 2017, 18.8%, 23.1% and 22.7% of our revenue was derived from sales that occurred outside of North America, respectively. In addition, a significant portion of our manufacturing operations is based in Ningbo, China and Taipei, Taiwan.
Trade-related government actions, by China or other countries that impose barriers or restrictions that would impact our ability to sell or ship products to customers or potential customers may have a negative impact on our financial condition and results of operations. We cannot predict the actions government entities may take in this context and may be unable to quickly offset or effectively react to government actions that restrict our ability to sell to certain customers or in certain jurisdictions. Government actions that affect our customers' ability to sell products or access critical elements of their supply chains may result in a decreased demand for their products, which may consequently reduce their demand for our products.
Our international revenue and operations are subject to a number of material risks, including:
|
●
|
difficulties in staffing, managing and supporting operations in more than one country;
|
|
●
|
difficulties in enforcing agreements and collecting receivables through foreign legal systems;
|
|
●
|
fewer legal protections for intellectual property in foreign jurisdictions;
|
|
●
|
foreign and U.S. taxation issues and international trade barriers, including the adoption or expansion of governmental trade tariffs;
|
|
●
|
difficulties in obtaining any necessary governmental authorizations for the export of our products to certain foreign jurisdictions;
|
|
●
|
fluctuations in foreign economies;
|
|
●
|
fluctuations in the value of foreign currencies and interest rates;
|
|
●
|
trade and travel restrictions;
|
|
●
|
domestic and international economic or political changes, hostilities and other disruptions in regions where we currently operate or may operate in the future;
|
|
●
|
difficulties and increased expenses in complying with a variety of U.S. and foreign laws, regulations and trade standards, including the Foreign Corrupt Practices Act; and
|
|
●
|
different and changing legal and regulatory requirements in the jurisdictions in which we currently operate or may operate in the future.
|
Negative developments in any of these factors in China or Taiwan or other countries could result in a reduction in demand for our products, the cancellation or delay of orders already placed, difficulties in producing and delivering our products, threats to our intellectual property, difficulty in collecting receivables, and a higher cost of doing business. Although we maintain certain compliance programs throughout the Company, violations of U.S. and foreign laws and regulations may result in criminal or civil sanctions, including material monetary fines, penalties and other costs against us or our employees, and may have a material adverse effect on our business.
Our business operations conducted in China and Taiwan are important to our success. A substantial portion of our property, plant and equipment is located in China and Taiwan. We expect to make further investments in China and Taiwan in the future. Therefore, our business, financial condition, results of operations and prospects are subject to economic, political, legal, and social events and developments in China and Taiwan. Factors affecting military, political or economic conditions in China and Taiwan could have a material adverse effect on our financial condition and results of operations, as well as the market price and the liquidity of our common shares.
In some instances, we rely on third parties to assist in selling our products, and the failure of those parties to perform as expected could reduce our future revenue.
Although we primarily sell our products through direct sales, we also sell our products to some of our customers through third party sales representatives and distributors. Many of such third parties also market and sell products from our competitors. Our third party sales representatives and distributors may terminate their relationships with us at any time, or with short notice. Our future performance will also depend, in part, on our ability to attract additional third party sales representatives and distributors that will be able to market and support our products effectively, especially in markets in which we have not previously distributed our products. If our current third party sales representatives and distributors fail to perform as expected, our revenue and results of operations could be harmed.
Changes in our effective tax rate may adversely affect our results of operation and our business.
We are subject to income taxes in the U.S. and other foreign jurisdictions, including China and Taiwan. In addition, we are subject to various state taxes in states where we have nexus. We base our tax position on the anticipated nature and conduct of our business and our understanding of the tax laws of the countries and states in which we have assets or conduct activities. Our tax position may be reviewed or challenged by tax authorities. Moreover, the tax laws currently in effect may change, and such changes may have retroactive effect, such as the U.S. tax reform legislation commonly referred to as the U.S. Tax Cuts and Jobs Act of 2017 (the “Tax Act”). We have inter-company arrangements in place providing for administrative and financing services and transfer pricing, which involve a significant degree of judgment and are often subject to close review by tax authorities. The tax authorities may challenge our positions related to these agreements. If the tax authorities successfully challenge our positions, our effective tax rate may increase, adversely affecting our results of operation and our business.
The Tax Act significantly changed how the U.S. taxes corporations. The Tax Act requires complex computations to be performed that were not previously required in U.S. tax law, significant judgments to be made in interpretation of the provisions of the Tax Act and significant estimates in calculations, and the preparation and analysis of information not previously relevant or regularly produced. The U.S. Treasury Department, the IRS, and other standard-setting bodies could interpret or issue guidance on how provisions of the Tax Act will be applied or otherwise administered that is different from our interpretation. As we interpret any additional guidance, we may make adjustments to amounts that we have recorded that may materially impact our provision for income taxes in the period in which the adjustments are made.
Failure to manage our growth effectively may adversely affect our financial condition and results of operations.
Successful implementation of our business plan in our target markets requires effective planning and management. Production volumes for some of our products are increasing and we have announced plans to increase our production capacity in response to demand for certain of our current and future products, including adding personnel in some of our locations as well as expanding our physical manufacturing facilities. We currently operate facilities in Sugar Land, Texas, Ningbo, China, Taipei, Taiwan, and Duluth, Georgia. We currently manufacture our lasers using a proprietary process and customized equipment located only in our Sugar Land, Texas facility, and it will be costly to duplicate that facility, to scale our laser manufacturing capacity or to mitigate the risks associated with operating a single facility. The challenges of managing our geographically dispersed operations have increased and will continue to increase the demand on our management systems and resources. Moreover, we are continuing to improve our financial and managerial controls, reporting systems and procedures. Any failure to manage our expansion and the resulting demands on our management systems and resources effectively may adversely affect our financial condition and results of operations.
Future acquisitions may adversely affect our financial condition and results of operations.
As part of our business strategy, we may pursue acquisitions of companies that we believe could enhance or complement our current product portfolio, augment our technology roadmap or diversify our revenue base. Acquisitions involve numerous risks, any of which could harm our business, including:
|
●
|
difficulties integrating the acquired business;
|
|
●
|
unanticipated costs, capital expenditures or liabilities or changes related to research in progress and product development;
|
|
●
|
diversion of financial and management resources from our existing business;
|
|
●
|
difficulties integrating the business relationships with suppliers and customers of the acquired business with our existing business relationships;
|
|
●
|
risks associated with entering markets in which we have little or no prior experience; and
|
|
●
|
potential loss of key employees, particularly those of the acquired organizations.
|
Acquisitions may also result in the recording of goodwill and other intangible assets subject to potential impairment in the future, adversely affecting our operating results. We may not achieve the anticipated benefits of an acquisition if we fail to evaluate it properly, and we may incur costs in excess of what we anticipate. A failure to evaluate and execute an acquisition appropriately or otherwise adequately address these risks may adversely affect our financial condition and results of operations.
We may be subject to disruptions or failures in information technology systems and network infrastructures that could have a material adverse effect on our business and financial condition.
We rely on the efficient and uninterrupted operation of complex information technology systems and network infrastructures to operate our business. A disruption, infiltration or failure of our information technology systems as a result of software or hardware malfunctions, system implementations or upgrades, computer viruses, third-party security breaches, employee error, theft or misuse, malfeasance, power disruptions, natural disasters or accidents could cause a breach of data security, loss of intellectual property and critical data and the release and misappropriation of sensitive competitive information and partner, customer, and employee personal data. We have experienced ransomware, computer viruses and other forms of cyber terrorism. In past incidents we have been able to recover quickly without material financial impact; however, any of these events could harm our competitive position, result in a loss of customer confidence, cause us to incur significant costs to remedy any damages and ultimately materially adversely affect our business and financial condition.
Our future results of operations may be subject to volatility as a result of exposure to fluctuations in currency exchange rates.
We have significant foreign currency exposure and are affected by fluctuations among the U.S. dollar, the Chinese Renminbi, or RMB, and the New Taiwan dollar, or NT dollar, because a substantial portion of our business is conducted in China and Taiwan. Our sales, raw materials, components and capital expenditures are denominated in U.S. dollars, RMB and NT dollars in varying amounts.
Foreign currency fluctuations may adversely affect our revenue and our costs and expenses, and hence our results of operations. The value of the NT dollar or the RMB against the U.S. dollar and other currencies may fluctuate and be affected by, among other things, changes in political and economic conditions. The RMB currency is no longer being pegged solely to the value of the U.S. dollar. In the long term, the RMB may appreciate or depreciate significantly in value against the U.S. dollar, depending upon the fluctuation of the basket of currencies against which it is currently valued, or it may be permitted to enter into a full float, which may also result in a significant appreciation or depreciation of the RMB against the U.S. dollar. In addition, our currency exchange variations may be magnified by Chinese exchange control regulations that restrict our ability to convert RMB into foreign currency.
Our sales in Europe are denominated in U.S. dollars and fluctuations in the Euro or our customers’ other local currencies relative to the U.S. dollar may impact our customers and affect our financial performance. If our customers’ local currencies weaken against the U.S. dollar, we may need to lower our prices to remain competitive in our international markets which could have a material adverse effect on our margins. If our customers’ local currencies strengthen against the U.S. dollar and if the local sales prices cannot be raised due to competitive pressures, we will experience a deterioration of our margins.
To date, we have not entered into any hedging transactions in an effort to reduce our exposure to foreign currency exchange risk. While we may decide to enter into hedging transactions in the future, the availability and effectiveness of these hedging transactions may be limited and we may not be able to successfully hedge our exposure.
Natural disasters or other catastrophic events could harm our operations.
Our operations in the U.S., China and Taiwan could be subject to significant risk of natural disasters, including earthquakes, hurricanes, typhoons, flooding and tornadoes, as well as other catastrophic events, such as epidemics, terrorist attacks or wars. For example, our corporate headquarters and wafer fabrication facility in Sugar Land, Texas is located near the Gulf of Mexico, an area that is susceptible to hurricanes. We use a proprietary MBE laser manufacturing process that requires customized equipment, and this process is currently conducted and located solely at our wafer fabrication facility in Sugar Land, Texas, such that a natural disaster, terrorist attack or other catastrophic event that affects that facility would materially harm our operations. In addition, our manufacturing facility in Taipei, Taiwan, is susceptible to typhoons and earthquakes, and our manufacturing facility in Ningbo, China, has from time to time, suffered electrical outages. Any disruption in our manufacturing facilities arising from these and other natural disasters or other catastrophic events could cause significant delays in the production or shipment of our products until we are able to shift production to different facilities or arrange for third parties to manufacture our products. We may not be able to obtain alternate capacity on favorable terms or at all. Our property insurance coverage with respect to natural disaster is limited and is subject to deductible and coverage limits. Such coverage may not be adequate or continue to be available at commercially reasonable rates and terms. The occurrence of any of these circumstances may adversely affect our financial condition and results of operation.
Our business could be negatively impacted as a result of shareholder activism.
In recent years, shareholder activists have become involved in numerous public companies. Shareholder activists frequently propose to involve themselves in the governance, strategic direction, and operations of the Company. We may in the future become subject to such shareholder activity and demands. Such demands may disrupt our business and divert the attention of our management and employees, and any perceived uncertainties as to our future direction resulting from such a situation could result in the loss of potential business opportunities, be exploited by our competitors, cause concern to our current or potential customers, and make it more difficult to attract and retain qualified personnel and business partners, all of which could adversely affect our business. In addition, actions of activist shareholders may cause significant fluctuations in our stock price based on temporary or speculative market perceptions or other factors that do not necessarily reflect the underlying fundamentals and prospects of our business.
The unfavorable outcome of any pending or future litigation or administrative action and expenses incurred in connection with litigation could result in financial losses or harm to our business.
We are, and in the future may be, subject to legal actions in the ordinary course of our operations, both domestically and internationally. There can be no assurances as to the favorable outcome of any litigation. In addition, it can be costly to defend litigation and these costs could negatively impact our financial results. As disclosed in “Part II - Item 1. Legal Proceedings,” on August 5, 2017, we and certain of our officers are currently subject to class action litigation related to allegations that we made materially false and misleading statements or failed to disclose material facts. Such litigation includes requests for damages and other relief. As further described in that section, subsequent derivative actions and securities class actions have since been filed. This litigation and any other such litigation could result in substantial costs and divert our management’s attention from other business concerns, which could seriously harm our business.
If we fail to protect, or incur significant costs in defending, our intellectual property and other proprietary rights, our business and results of operations could be materially harmed.
Our success depends on our ability to protect our intellectual property and other proprietary rights. We rely on a combination of patent, trademark, copyright, trade secret and unfair competition laws, as well as license agreements and other contractual provisions, to establish and protect our intellectual property and other proprietary rights. We have applied for patents in the U.S. and in other foreign countries, some of which have been issued. In addition, we have registered certain trademarks in the U.S. We cannot guarantee that our pending applications will be approved by the applicable governmental authorities. Moreover, our existing and future patents and trademarks may not be sufficiently broad to protect our proprietary rights or may be held invalid or unenforceable in court. A failure to obtain patents or trademark registrations or a successful challenge to our patents and trademark registrations in the U.S. or other foreign countries may limit our ability to protect the intellectual property rights that these patent and trademark registrations intended to cover.
Policing unauthorized use of our technology is difficult and we cannot be certain that the steps we have taken will prevent the misappropriation, unauthorized use or other infringement of our intellectual property rights. Further, we may not be able to effectively protect our intellectual property rights from misappropriation or other infringement in foreign countries where we have not applied for patent protections and where effective patent, trademark, trade secret and other intellectual property laws may be unavailable, or may not protect our proprietary rights as fully as U.S. law. We may seek to secure comparable intellectual property protections in other countries. However, the level of protection afforded by patent and other laws in other countries may not be comparable to that afforded in the U.S.
We also attempt to protect our intellectual property, including our trade secrets and know-how, through the use of trade secret and other intellectual property laws, and contractual provisions. We enter into confidentiality and invention assignment agreements with our employees and independent consultants. We also use non-disclosure agreements with other third parties who may have access to our proprietary technologies and information. Such measures, however, provide only limited protection, and there can be no assurance that our confidentiality and non-disclosure agreements will not be breached, especially after our employees end their employment, and that our trade secrets will not otherwise become known by competitors or that we will have adequate remedies in the event of unauthorized use or disclosure of proprietary information. Unauthorized third parties may try to copy or reverse engineer our products or portions of our products, otherwise obtain and use our intellectual property, or may independently develop similar or equivalent trade secrets or know-how. If we fail to protect our intellectual property and other proprietary rights, or if such intellectual property and proprietary rights are infringed, misappropriated or duplicated, our business, results of operations or financial condition could be materially harmed.
In the future, we may need to take legal actions to prevent third parties from infringing upon or misappropriating our intellectual property or from otherwise gaining access to our technology. Protecting and enforcing our intellectual property rights and determining their validity and scope could result in significant litigation costs and require significant time and attention from our technical and management personnel, which could significantly harm our business. We may not prevail in such proceedings, and an adverse outcome may adversely impact our competitive advantage or otherwise harm our financial condition and our business.
We may be involved in intellectual property disputes in the future, which could divert management’s attention, cause us to incur significant costs and prevent us from selling or using the challenged technology.
Participants in the markets in which we sell our products have experienced frequent litigation regarding patent and other intellectual property rights. While we have a policy in place that is designed to reduce the risk of infringement of intellectual property rights of others and we have conducted a limited review of other companies’ relevant patents, there can be no assurance that third parties will not assert infringement claims against us. We cannot be certain that our products would not be found infringing on the intellectual property rights of others. Regardless of their merit, responding to such claims can be time consuming, divert management’s attention and resources and may cause us to incur significant expenses. Intellectual property claims against us could force us to do one or more of the following:
|
●
|
obtain from a third-party claiming infringement a license to the relevant technology, which may not be available on reasonable terms, or at all;
|
|
●
|
stop manufacturing, selling, incorporating or using our products that use the challenged intellectual property;
|
|
●
|
pay substantial monetary damages; or
|
|
●
|
expend significant resources to redesign the products that use the technology and to develop non-infringing technology.
|
Any of these actions could result in a substantial reduction in our revenue and could result in losses over an extended period of time.
In any potential intellectual property dispute, our customers could also become the target of litigation. Because we often indemnify our customers for intellectual property claims made against them with respect to our products, any claims against our customers could trigger indemnification claims against us. These obligations could result in substantial expenses such as legal expenses, damages for past infringement or royalties for future use. Any indemnity claim could also adversely affect our relationships with our customers and result in substantial costs to us.
If we fail to obtain the right to use the intellectual property rights of others that are necessary to operate our business, and to protect their intellectual property, our business and results of operations will be adversely affected.
From time to time we may choose to or be required to license technology or intellectual property from third parties in connection with the development of our products. We cannot assure you that third party licenses will be available to us on commercially reasonable terms, if at all. Generally, a license, if granted, would include payments of up-front fees, ongoing royalties or both. These payments or other terms could have a significant adverse impact on our results of operations. Our inability to obtain a necessary third-party license required for our product offerings or to develop new products and product enhancements could require us to substitute technology of lower quality or performance standards, or of greater cost, any of which could adversely affect our business. If we are not able to obtain licenses from third parties, if necessary, then we may also be subject to litigation to defend against infringement claims from these third parties. Our competitors may be able to obtain licenses or cross-license their technology on better terms than we can, which could put us at a competitive disadvantage.
If we fail to maintain an effective system of disclosure controls and internal control over financial reporting, the accuracy and timing of our financial reporting may be adversely affected.
Preparing our consolidated financial statements involves a number of complex manual and automated processes, which are dependent upon individual data input or review and require significant management judgment. One or more of these elements may result in errors that may not be detected and could result in a material misstatement of our consolidated financial statements. The Sarbanes-Oxley Act requires, among other things, that as a publicly-traded company we disclose whether our internal control over financial reporting and disclosure controls and procedures are effective.
We have implemented a system of disclosure and internal controls that we believe provide reasonable assurance that we will be able to timely report our financial results and avoid accounting errors or material weaknesses in future periods. However, our internal controls cannot guarantee that no accounting errors exist or that all accounting errors, no matter how immaterial, will be detected because a control system, no matter how well designed and operated, can provide only reasonable, but not absolute assurance that the control system’s objectives will be met. If we are unable to implement and maintain an effective system of disclosure controls and internal control over financial reporting, our ability to accurately and timely report our financial results could be adversely impacted. This could result in late filings of our annual and quarterly reports under the Exchange Act, restatements of our consolidated financial statements, a decline in our stock price, suspension or delisting of our common stock by NASDAQ, or other material adverse effects on our business, reputation, results of operations or financial condition.
Our ability to use our net operating losses and certain other tax attributes may be limited.
As of December 31, 2019, we had U.S. accumulated net operating losses, or NOLs, of approximately $75.9 million, federal and state research and development credits (“R&D credits”) of $8.3 million, interest expense of $0.8 million and foreign tax credits of $4.6 million for U.S. federal income tax purposes. Our ability to use our net operating losses, or NOLs, to offset future taxable income may be subject to certain limitations which could subject our business to higher tax liability. We may be limited in the portion of NOL carryforwards that we can use in the future to offset taxable income for U.S. federal and state income tax purposes, and federal tax credits to offset federal tax liabilities. Sections 382 and 383 of the Internal Revenue Code of 1986, as amended, limit the use of NOLs and tax credits after a cumulative change in corporate ownership of more than 50% occurs within a three-year period. The statutes place a formula limit on how much NOLs and tax credits a corporation can use in a tax year after a change in ownership. Avoiding an ownership change is generally beyond our control. Although the ownership changes we experienced in the past and in the year ended December 31, 2019 had not prevented us from using all NOLs and tax credits accumulated before such ownership changes, we could experience another ownership change that might limit our use of NOLs and tax credits in the future. Under the Tax Cuts and Jobs Act of 2017, or Tax Act, NOLs from tax years that began after December 31, 2017 do not expire, but NOLs from tax years that began before January 1, 2018 expire after 20 years. Further, under the Tax Act, although the treatment of tax losses generated in taxable years ending before December 31, 2017 has generally not changed, tax losses generated in taxable years beginning after December 31, 2017 may offset no more than 80% of taxable income annually. Accordingly, if we generate NOLs after the tax year ended December 31, 2017, we might have to pay more federal income taxes in a subsequent year as a result of the 80% taxable income limitation than we would have had to pay under the law in effect before the Tax Act.
Our manufacturing operations are subject to environmental regulation that could limit our growth or impose substantial costs, adversely affecting our financial condition and results of operations.
Our properties, operations and products are subject to the environmental laws and regulations of the jurisdictions in which we operate and sell products. These laws and regulations govern, among other things, air emissions, wastewater discharges, the management and disposal of hazardous materials and solid wastes, the contamination of soil and groundwater, employee health and safety and the content, performance, packaging and disposal of products. Our failure to comply with current and future environmental laws and regulations, or the identification of contamination for which we are liable, could subject us to substantial costs, including fines, clean-up costs, natural resource damages, third-party property damages or personal injury claims, administrative, civil or criminal penalties and could result in injunctive relief requiring us to make significant investments to upgrade our facilities, redesign or change our manufacturing processes, redesign our products, or curtail our operations. Liability under environmental, health and safety laws can be joint and several and without regard to fault or negligence. For example, pursuant to environmental laws and regulations, including but not limited to the Comprehensive Environmental Response Compensation and Liability Act, or CERCLA, we may be liable for the full amount of any remediation-related costs at properties we currently own or formerly owned, such as our currently owned Sugar Land, Texas facility, or at properties at which we previously operated, as well as at properties we will own or operate in the future, and properties to which we have sent hazardous substances, whether or not we caused the contamination. Identification of presently unidentified environmental conditions, more vigorous enforcement by a governmental authority, enactment of more stringent legal requirements or other unanticipated events could give rise to adverse publicity, restrict our operations, affect the design or marketability of our products or otherwise cause us to incur material environmental costs, adversely affecting our financial condition and results of operations.
We are exposed to increased expenses and business risk as a result of Restriction on Hazardous Substances, or RoHS directives.
Following the lead of the European Union, or EU, various governmental agencies have either already put into place or are planning to introduce regulations that regulate the permissible levels of hazardous substances in products sold in various regions of the world. For example, the RoHS directive for EU took effect on July 1, 2006. The labeling provisions of similar legislation in China went into effect on March 1, 2007. Consequently, many suppliers of products sold into the EU have required their suppliers to be compliant with the new directive. Many of our customers have adopted this approach and have required our full compliance. Though we have devoted a significant amount of resources and effort in planning and executing our RoHS program, it is possible that some of our products might be incompatible with such regulations. In such events, we could experience the following consequences: loss of revenue, damaged reputation, diversion of resources, monetary penalties, and legal action.
Failure to comply with the U.S. Foreign Corrupt Practices Act could subject us to penalties and other adverse consequences.
We are subject to the U.S. Foreign Corrupt Practices Act which generally prohibits U.S. companies from engaging in bribery or other prohibited payments to foreign officials for the purpose of obtaining or retaining business. In addition, we are required to maintain records that accurately and fairly represent our transactions and have an adequate system of internal accounting controls. Foreign companies, including some that may compete with us, may not be subject to these prohibitions, and therefore may have a competitive advantage over us. If we are not successful in implementing and maintaining adequate preventative measures, we may be responsible for acts of our employees or other agents engaging in such conduct. We could suffer severe penalties and other consequences that may have a material adverse effect on our financial condition and results of operations.
We are subject to governmental export and import controls that could subject us to liability or impair our ability to compete in international markets.
We are subject to export and import control laws, trade regulations and other trade requirements that limit which products we sell and where and to whom we sell our products. Specifically, the Bureau of Industry and Security of the U.S. Department of Commerce is responsible for regulating the export of most commercial items that are so called dual-use goods that may have both commercial and military applications. Our products are classified under Export Control Classification Numbers, or ECCNs, 5A991.b.5.a and 6A995. Export Control Classification requirements are dependent upon an item’s technical characteristics, the destination, the end-use, the end-user, and other activities of the end-user. Should the regulations applicable to our products change, or the restrictions applicable to countries to which we ship our products change, then the export of our products to such countries could be restricted. As a result, our ability to export or sell our products to certain countries could be restricted, which could adversely affect our business, financial condition and results of operations.
Changes in our products or any change in export or import regulations or related legislation, shift in approach to the enforcement or scope of existing regulations, or change in the countries, persons or technologies targeted by such regulations, could result in delayed or decreased sales of our products to existing or potential customers. In such event, our business and results of operations could be adversely affected.
Rapidly changing standards and regulations could make our products obsolete, which would cause our revenue and results of operations to suffer.
We design our products to conform to regulations established by governments and to standards set by industry standards bodies worldwide, such as the American National Standards Institute, the European Telecommunications Standards Institute, the International Telecommunications Union and the Institute of Electrical and Electronics Engineers, Inc. Various industry organizations are currently considering whether and to what extent to create standards applicable to our products. Because certain of our products are designed to conform to current specific industry standards, if competing or new standards emerge that are preferred by our customers, we would have to make significant expenditures to develop new products. If our customers adopt new or competing industry standards with which our products are not compatible, or the industry groups adopt standards or governments issue regulations with which our products are not compatible, our existing products would become less desirable to our customers and our revenue and results of operations would suffer.
Compliance with regulations related to conflict minerals could increase costs and affect the manufacturing and sale of our products.
Public companies are required to disclose the use of tin, tantalum, tungsten and gold (collectively, “conflict minerals”) mined from the Democratic Republic of the Congo and adjoining countries (the “covered countries”) if a conflict mineral(s) is necessary to the functionality of a product manufactured, or contracted to be manufactured, by the Company. We filed our latest conflict minerals report on Form SD on May 29, 2019. We have previously determined, as part of our compliance efforts, that certain products or components we obtain from our suppliers contain conflict minerals. Based on our Reasonable Country of Origin Inquiry on the source of our conflict minerals for the year ended December 31, 2019, we had reason to believe that certain of such conflict minerals likely originated in covered countries. If we are unable to conclude in the future that all our products are free from conflict minerals originating from covered countries, this could have a negative impact on our business, reputation and/or results of operations. We may also encounter challenges to satisfy customers who require that our products be certified as conflict free, which could place us at a competitive disadvantage if we are unable to substantiate such a claim. Compliance with these rules could also affect the sourcing and availability of some of the minerals used in the manufacture of products or components we obtain from our suppliers, including our ability to obtain products or components in sufficient quantities and/or at competitive prices. Certain of our customers are requiring additional information from us regarding the origin of our raw materials, and complying with these customer requirements may cause us to incur additional costs, such as costs related to determining the origin of any minerals used in our products. Our supply chain is complex and we may be unable to verify the origins for all metals used in our products. We may also encounter challenges with our customers and stockholders if we are unable to certify that our products are conflict free.
Some provisions of our named executive officers’ agreements regarding change of control or separation of service contain obligations for us to make separation payments to them upon their termination.
Certain provisions contained in our employment agreements with our named executive officers regarding change of control or separation of service may obligate us to make lump sum severance payments and related payments upon the termination of their employment with us, other than such executive officer’s resignation without good reason or our termination of their employment as a result of their disability or for cause. In the event we are required to make these separation payments, it could have a material adverse effect on our results of operations for the fiscal period in which such payments are made.
Risks Related to Our Operations in China
Our business operations conducted in China are critical to our success. A total of $83.3 million, $143.1 million, and $122.3 million or 43.6%, 53.6%, and 32.0%, of our revenue in the years ended December 31, 2019, 2018 and 2017 was attributable to our product manufactured at our plant in China, respectively. Additionally, a substantial portion of our property, plant and equipment, 37.1%, 36.8%, and 29.9% as of December 31, 2019, 2018 and 2017, was located in China, respectively. We expect to make further investments in China in the foreseeable future. Therefore, our business, financial condition, results of operations and prospects are to a significant degree subject to economic, political, legal, and social events and developments in China.
Adverse changes in economic and political policies in China, or Chinese laws or regulations could have a material adverse effect on business conditions and the overall economic growth of China, which could adversely affect our business.
The Chinese economy differs from the economies of most developed countries in many respects, including the level of government involvement, level of development, growth rate, control of foreign exchange and allocation of resources. The Chinese economy has been transitioning from a planned economy to a more market-oriented economy. Despite reforms, the government continues to exercise significant control over China’s economic growth by way of the allocation of resources, control over foreign currency-denominated obligations and monetary policy and provision of preferential treatment to particular industries or companies.
In addition, the laws, regulations and legal requirements in China, including the laws that apply to foreign-invested enterprises, or FIEs, are subject to frequent changes. The interpretation and enforcement of such laws is uncertain. Protections of intellectual property rights and confidentiality in China may not be as effective as in the U.S. or other countries or regions with more developed legal systems. Any litigation in China may be protracted and result in substantial costs and diversion of resources and management attention. Any adverse changes to these laws, regulations and legal requirements or their interpretation or enforcement could have a material adverse effect on our business.
Furthermore, while China’s economy has experienced rapid growth in the past 20 years, growth has been uneven across different regions, among various economic sectors and over time. China has also in the past and may in the future experience economic downturns due to, for example, government austerity measures, changes in government policies relating to capital spending, limitations placed on the ability of commercial banks to make loans, reduced levels of exports and international trade, inflation, lack of financial liquidity, stock market volatility and global economic conditions. Any of these developments could contribute to a decline in business and consumer spending in addition to other adverse market conditions, which could adversely affect our business.
The termination and expiration or unavailability of our preferential tax treatments in China may have a material adverse effect on our operating results.
Prior to January 1, 2008, entities established in China were generally subject to a 30% state and 3% local enterprise income tax rate. In accordance with the China Income Tax Law for Enterprises with Foreign Investment and Foreign Enterprises, effective through December 31, 2007, our China subsidiary enjoyed preferential income tax rates. Effective January 1, 2008, the China Enterprise Income Tax Law, or the EIT law, imposes a single uniform income tax rate of 25% on all Chinese enterprises, including FIEs, and eliminates or modifies most of the tax exemptions, reductions and preferential treatment available under the previous tax laws and regulations. As a result, our China subsidiary may be subject to the uniform income tax rate of 25% unless we are able to qualify for preferential status. Since calendar year 2012, we have qualified for a preferential 15% tax rate that is available for state-encouraged new high technology enterprises. In order to retain this preferential tax rate, we must meet certain operating conditions, satisfy certain product requirements, meet certain headcount requirements and maintain certain levels of research expenditures. In November 2017, we received approval from the Chinese government to extend this preferential tax treatment for an additional three years, ending November 2020. If we fail to continue to qualify for this preferential rate in the future, we may incur higher tax rates on our income in China. Any future increase in the enterprise income tax rate applicable to us or the expiration or other limitation of preferential tax rates available to us could increase our tax liabilities and reduce our net income.
The turnover of direct labor in manufacturing industries in China is high, which could adversely affect our production, shipments and results of operations.
Employee turnover of direct labor in the manufacturing sector in China is extremely high and retention of such personnel is a challenge to companies located in or with operations in China. Although direct labor costs do not represent a high proportion of our overall manufacturing costs, direct labor is required for the manufacture of our products. If our direct labor turnover rates are higher than we expect, or we otherwise fail to adequately manage our direct labor turnover rates, then our results of operations could be adversely affected.
Chinese regulation of loans to and direct investment by offshore holding companies in China entities may delay or prevent us from making loans or additional capital contributions to our China subsidiary.
Any loans that we wish to make to our China subsidiary are subject to Chinese regulations and approvals. For example, any loans to our China subsidiary to finance their activities cannot exceed statutory limits, must be registered with State Administration of Foreign Exchange, or SAFE, or its local counterpart, and must be approved by the relevant government authorities. Any capital contributions to our China subsidiary must be approved by the Ministry of Commerce or its local counterpart. In addition, under Circular 142, our China subsidiary, as a FIE, may not be able to convert our capital contributions to them into RMB for equity investments or acquisitions in China.
We cannot assure you that we will be able to obtain these government registrations or approvals on a timely basis, if at all, with respect to our future loans or capital contributions to our China subsidiary. If we fail to receive such registrations or approvals, our ability to capitalize our China subsidiary may be negatively affected, which could materially and adversely affect our liquidity and ability to fund and expand our business.
Our China subsidiary is subject to Chinese labor laws and regulations, and Chinese labor laws may increase our operating costs in China.
Chinese labor laws and regulations provide certain protections for our employees located in China, and changes to those labor laws and regulations may increase our costs and reduce our flexibility. The China Labor Contract Law, which went into effect in 2008, together with its implementing rules, provides increased rights to Chinese employees compared to prior employment laws in China. Under the rules under the China Labor Contract Law, the probation period varies depending on contract terms and the employment contract can only be terminated during the probation period for cause upon three days’ notice. Additionally, an employer may not be able to terminate a contract during the probation period on the grounds of a material change of circumstances or a mass layoff. The law also has specific provisions on conditions when an employer has to sign an employment contract with open-ended terms. If an employer fails to enter into an open-ended contract in certain circumstances, the employer must pay the employee twice their monthly wage beginning from the time the employer should have executed an open-ended contract. Additionally, an employer must pay severance for nearly all terminations, including when an employer decides not to renew a fixed-term contract. Any further changes to these laws may increase our costs and reduce our flexibility.
An increase in our labor costs in China may adversely affect our business and our profitability.
A significant portion of our workforce is located in China. Labor costs in China have been increasing recently due to labor unrest, strikes and changes in employment laws. If labor costs in China continue to increase, our costs will increase. If we are not able to pass these increases on to our customers, our business, profitability and results of operations may be adversely affected.
We may have difficulty establishing and maintaining adequate management and financial controls over our China operations.
Businesses in China have historically not adopted a western style of management and financial reporting concepts and practices, which includes strong corporate governance, internal controls and computer, financial and other control systems. Moreover, familiarity with U.S. GAAP principles and reporting procedures is less common in China. As a consequence, we may have difficulty finding accounting personnel experienced with U.S. GAAP, and we may have difficulty training and integrating our China-based accounting staff with our U.S.-based finance organization. As a result of these factors, we may experience difficulty in establishing and maintaining management and financial controls over our China operations. These difficulties include collecting financial data and preparing financial statements, books of account and corporate records and instituting business practices that meet U.S. public-company reporting requirements. We may, in turn, experience difficulties in implementing and maintaining adequate internal controls as required under Section 404 of the Sarbanes-Oxley Act.
Risks Related to Our Common Stock
Our stock price has been and is likely to be volatile.
The market price of our common stock has been and is likely to be subject to wide fluctuations in response to, among other things, the risk factors described in this section of this Quarterly Report on Form 10-Q, and other factors beyond our control, such as fluctuations in the valuation of companies perceived by investors to be comparable to us. For example, announcements made by competitors regarding factors influencing their business may cause fluctuations in the valuation of companies throughout our industry, including fluctuations in the valuation of our stock.
Furthermore, the stock markets have experienced price and volume fluctuations that have affected and continue to affect the market prices of equity securities of many companies. These fluctuations often have been unrelated or disproportionate to the operating performance of those companies. These broad market and industry fluctuations, as well as general economic, political and market conditions, such as recessions, interest rate changes or international currency fluctuations, may negatively affect the market price of our common stock.
In the past, many companies that have experienced volatility in the market price of their stock have been subject to securities class action litigation. We have been and may become the target of this type of litigation in the future. For example, on August 3, 2017 we provided guidance for the third quarter of 2017, and on August 4, 2017 the market price of our stock decreased significantly. As disclosed in “Part II - Item 1. Legal Proceedings,” on August 5, 2017, a class action lawsuit was filed against us and two of our officers. The complaint in this matter alleges that we made materially false and misleading statements or failed to disclose material facts and requests damages and other relief. On August 7, 2018, a derivative class action lawsuit was filed against our chief executive officer, chief financial officer and board of directors. The allegations are substantially similar to those under the August 5, 2017 lawsuit. On October 1, 2018, another class action lawsuit was filed in the U.S. District Court for the Southern District of Texas against us and two of our officers. The complaint in this matter alleges that we made materially false and misleading statements or failed to disclose material facts and a related action was filed on October 10, 2018. These lawsuits and any other such litigation could result in substantial costs and divert our management’s attention from other business concerns, which could seriously harm our business.
We have incurred and will continue to incur significant increased expenses and administrative burdens as a public company, which could have a material adverse effect on our operations and financial results.
We face increased legal, accounting, administrative and other costs and expenses as a public company that we did not incur as a private company, and greater expenditures may be necessary in the future with the advent of new laws, regulations and stock exchange listing requirements pertaining to public companies. These increased costs will require us to divert a significant amount of money that we could otherwise use to expand our business and achieve our strategic objectives. The Sarbanes-Oxley Act, including the requirements of Section 404, as well as rules and regulations subsequently implemented by the SEC, the Public Company Accounting Oversight Board and the NASDAQ Global Market, impose additional reporting and other obligations on public companies. Compliance with public company requirements has increased our costs and made some activities more time-consuming. For example, we have created board committees and adopted internal controls and disclosure controls and procedures. In addition, we have incurred and will continue to incur additional expenses associated with our SEC reporting requirements. Furthermore, if we identify any issues in complying with those requirements (for example, if we or our auditors identify a material weakness or significant deficiency in our internal control over financial reporting), we could incur additional costs rectifying those issues, and the existence of those issues could adversely affect us, our reputation or investor perceptions of us. Advocacy efforts by stockholders and third parties may also prompt additional changes in governance and reporting requirements, which could further increase our costs. Legal, accounting, administrative and other costs and expenses may increase in the future as we continue to incur both increased external audit fees as well as additional spending to ensure continued regulatory compliance.
We currently do not intend to pay dividends on our common stock and, consequently, your only opportunity to achieve a return on your investment is if the price of our common stock appreciates.
We currently do not plan to declare or pay dividends on shares of our common stock in the foreseeable future. Consequently, your only opportunity to achieve a return on any shares of our common stock that you may acquire will be if the market price of our common stock appreciates and you sell your shares at a profit. There is no guarantee that the price of our common stock in the market will ever exceed the price that you pay.
Our charter documents, stock incentive plans and Delaware law could prevent a takeover that stockholders consider favorable and could also reduce the market price of our stock.
Our amended and restated certificate of incorporation and our amended and restated bylaws and our stock incentive plans contain provisions that could delay or prevent a change in control of our company. These provisions could also make it more difficult for stockholders to elect directors and take other corporate actions. These provisions include:
|
●
|
providing for a classified Board of Directors with staggered, three-year terms;
|
|
●
|
not providing for cumulative voting in the election of directors;
|
|
●
|
authorizing our Board of Directors to issue, without stockholder approval, preferred stock rights senior to those of common stock;
|
|
●
|
prohibiting stockholder action by written consent;
|
|
●
|
limiting the persons who may call special meetings of stockholders;
|
|
●
|
requiring advance notification of stockholder nominations and proposals; and
|
|
●
|
change of control provisions in our stock incentive plans, and the individual stock option agreements, which provide that a change of control may accelerate the vesting of the stock options and equity awards issued under such plans.
|
In addition, we are governed by the provisions of Section 203 of the Delaware General Corporate Law. These provisions may prohibit large stockholders, in particular those owning 15% or more of our outstanding common stock, from engaging in certain business combinations without the approval of substantially all of our stockholders for a certain period of time.
These and other provisions in our amended and restated certificate of incorporation, our amended and restated bylaws and under Delaware law could discourage potential takeover attempts, reduce the price that investors might be willing to pay for shares of our common stock in the future and result in the market price being lower than it would be without these provisions.
*Our Amended and Restated Certificate of Incorporation includes a forum selection clause, which could limit our stockholders' ability to obtain a favorable judicial forum for disputes with us.
Our Amended and Restated Certificate of Incorporation provides that, unless the Company consents in writing to the selection of an alternative forum, the Court of Chancery of the State of Delaware shall be the sole and exclusive forum for (i) any derivative action or proceeding brought on behalf of the Company, (ii) any action asserting a claim of breach of a fiduciary duty owed by any director, officer or other employee of the Company to the Company or the Company's stockholders, (iii) any action asserting a claim arising pursuant to any provision of the Delaware General Corporation Law or the Company's Amended and Restated Certificate of Incorporation or By-laws, or (iv) any action asserting a claim against the Company governed by the internal affairs doctrine. This exclusive forum provision will not apply to claims under the Securities Exchange Act of 1934 but will apply to other state and federal law claims including actions arising under the Securities Act of 1933 (although our stockholders will not be deemed to have waived our compliance with the federal securities laws and the rules and regulations thereunder). Section 22 of the Securities Act of 1933, however, creates concurrent jurisdiction for federal and state courts over all suits brought to enforce any duty or liability created by the Securities Act of 1933 or the rules and regulations thereunder. Accordingly, there is uncertainty as to whether a court would enforce such a forum selection provision as written in connection with claims arising under the Securities Act of 1933. This forum selection provision in our Amended and Restated Certificate of Incorporation may limit our stockholders' ability to obtain a favorable judicial forum for disputes with us. It is also possible that a court could rule that such a provision is inapplicable or unenforceable.
If research analysts do not publish research about our business or if they issue unfavorable commentary or downgrade our common stock, our stock price and trading volume could decline.
The trading market for our common stock depends on the research and reports that research analysts publish about us and our business. The price of our common stock could decline if one or more research analysts downgrade our common stock or if those analysts issue other unfavorable commentary or cease publishing reports about us or our business. If one or more of the research analysts ceases coverage of our company or fails to publish reports on us regularly, demand for our stock could decrease, which could cause our stock price or trading volume to decline.