Anglesey Mining PLC Optimisation Study on Parys Mountain Mine Project
November 26 2018 - 2:00AM
UK Regulatory
TIDMAYM
Anglesey Mining plc ("AYM") is pleased to announce a major development on the
path forward for the advancement of its Parys Mountain copper, zinc, lead, gold
and silver project, located on the island of Anglesey in North Wales.
Under a Project Development and Cooperation Agreement ("Agreement") entered
into with QME Mining Technical Services, a division of QME Ltd, ("QME"), QME
will, at no cost to AYM, carry out an agreed programme of design, engineering
and optimisation studies relating to the future development of Parys Mountain.
Over the period to the end of June 2019, QME will carry out a detailed review
of various development and mining alternatives for Parys Mountain. The primary
objective is to determine the optimum production plan for Parys Mountain,
utilising all available and potential means of accessing both the indicated
resources and inferred resources, (as currently defined and estimated by Micon
International) at various "cut-off" grades.
Anglesey Chief Executive, Bill Hooley, said: "We consider this to be a very
important and positive step forward in the development of the Parys Mountain
mine. QME is experienced in underground mine development and has developed and
recruited the necessary skills in mine planning to deliver local and relevant
underground mining expertise to Parys Mountain that will assist Anglesey to
move forward with the development of the Parys Mountain project at no direct
cash cost to Anglesey or dilution of its shareholders."
AYM has agreed to grant QME various rights and options relating to the future
development of Parys Mountain. On completion of the optimisation study and
delivery to AYM of the results thereof:
(i) AYM will award QME, on an exclusive basis, contracts for the
development of the decline and underground mine development, including
rehabilitation of the shaft. This will be done on terms to be agreed following
a decision by AYM to proceed with the development of Parys Mountain;
(ii) In the event Anglesey and QME are not able to agree terms AYM may
offer such contracts to third parties, subject to a right of first refusal in
favour of QME, and subject to a payment by AYM to QME, upon the award of such
contracts to a third-party, of a break-fee; and
(iii) In addition, AYM will grant to QME the right and option, upon
completion of a Prefeasibility Study ("PFS"), to undertake at QME's cost and
investment, the mine development component of the Parys Mountain project,
including decline and related underground development and shaft development,
with a scope to be agreed, to the point of commencement of production, in
consideration of which QME would earn a 30% undivided joint venture interest in
the Parys Mountain project.
Parys Mountain - 2017 Scoping Study Recommendations
In July 2017 a Scoping Study on Parys Mountain, was prepared by Micon
International Limited (Micon) and Fairport Engineering Ltd. The Scoping Study
envisages a mining rate of 1,000 tonnes per day, to produce an average annual
output of 14,000 tonnes of zinc concentrate at 57% Zn, 7,200 tonnes of lead
concentrate at 52% Pb and 4,000 tonnes of copper concentrate at 25% Cu, over an
initial mine life of eight years.
Following completion of the positive 2017 Scoping Study, Anglesey has been
working to progress the Parys Mountain project towards production. The 2017
Scoping Study recommended further work as interim steps towards undertaking a
PFS, including more detailed mine planning and design, more engineering
studies, additional metallurgical test work and a review of tailings management
and environmental and planning permissions, all of which will require new and
further financing. The Agreement with QME announced today is a major component
of this and is a very positive development that will significantly advance the
Parys Mountain project
Optimisation Studies and Revised Mine Plan
The 2017 Scoping Study was based on mining only the 2.1 million tonnes of
indicated resources reported by Micon in 2012. Micon had reported a further 4.1
million tonnes of inferred resources which were not incorporated into the
Scoping Study. Development of even half of these inferred resources not
included in the Scoping Study, would significantly increase the projected life
of the Parys Mountain mine with potential positive outcomes on the project
economics.
Under the Agreement QME will examine a revised mine model with the objective of
incorporating some of the inferred resources, including part of the
higher-grade Engine Zone inferred resources, into the earlier years of the mine
plan with the intention of bringing forward cashflows and increasing the life
of the mine to at least 10 years.
The 2017 Scoping Study was based on the initial development and production from
the White Rock zone using a newly developed decline eventually leading to
development of the deeper Engine zone and then the rehabilitation and use of
the Morris Shaft as a hoisting facility.
The QME review will examine whether different approaches to accessing the
orebodies, particularly by early dewatering, rehabilitation and recommissioning
of the Morris Shaft, could provide early access to the higher-grade Engine zone
resources. This should have a beneficial effect upon both the net present value
of the operation and the pay-back period.
It is expected that these optimisation studies will be completed by the middle
of 2019 and, subject to financing being available, would then form the basis
for commissioning of a Preliminary Feasibility Study to lead to an overall
project financing package.
Following delivery of the optimisation studies pursuant to the Agreement, and
the subsequent completion of a PFS, QME will have the option to undertake at
QME's investment, the mine development component of the Parys Mountain project,
including decline and related underground development and shaft development, in
consideration of which QME would earn a 30% undivided joint venture interest in
the Parys Mountain project, thereby significantly reducing AYM's capital cost
requirements.
About QME
QME Limited, founded in 1987 by its current Managing Director Peter McParland,
is based in Navan, County Meath, Ireland from which it operates several
divisions and provides a wide range of services in the fields of both mine
development and mine operations to the local and international mining
community.
QME Mining Technical Services division undertakes contract mining projects and
employs an 'in-house' team of highly experienced operations managers,
underground supervisors, miners, fitters and electricians. QME has carried out
both large- and small-scale underground mine development contracts, providing
all technical evaluation and budgeting services, personnel, management,
equipment and maintenance.
Current and past clients include: Boliden Tara Mines, Navan, Ireland; Dalradian
Gold Limited, Curraghinalt, Northern Ireland; Lafarge Holcim, Glensanda Super
Quarry, Scotland; Lundin Mining Galmoy Mine, Ireland; Vedanta Lisheen Mine,
Ireland; Irish Base Metals Ltd., Tynagh Mine and Gortdrum Mine, Ireland; Saint
Gobain, Gyproc, Ireland; Northgate Exploration Ltd, Canada; and Campbell
Resources, Canada.
QME Equipment Division is a large provider of new and re-manufactured
underground and open pit mining equipment to the international mining industry
worldwide, employing a highly skilled workforce of mechanical and technical
staff with the capability to repair or fully overhaul a wide range of mining
equipment.
About Anglesey Mining plc
Anglesey is carrying out feasibility and development work at its 100% owned
Parys Mountain copper, zinc, lead deposit in North Wales, UK with a reported
resource of 2.1 million tonnes at 6.9% combined base metals in the indicated
category and 4.1 million tonnes at 5.0% combined base metals in the inferred
category.
Anglesey holds a 6% interest and management rights to the Grangesberg Iron
project in Sweden, together with a right of first refusal to increase its
interest by a further 51%. Anglesey also holds 12% of Labrador Iron Mines
Holdings Limited which holds direct shipping iron ore deposits in Labrador and
Quebec.
For further information, please contact:
Bill Hooley, Chief Executive +44 (0)7785 572517
Danesh Varma, Finance Director +44 (0)7740 932766
For further information on QME, please contact:
Peter McParland, Managing Director QME: +353 (0) 87 2566601 www.qme.ie
END
(END) Dow Jones Newswires
November 26, 2018 02:00 ET (07:00 GMT)
Anglesey Mining (LSE:AYM)
Historical Stock Chart
From Apr 2024 to May 2024
Anglesey Mining (LSE:AYM)
Historical Stock Chart
From May 2023 to May 2024