Accsys Technologies PLC Total Voting Rights (7317J)
June 30 2017 - 5:13AM
UK Regulatory
TIDMAXS
RNS Number : 7317J
Accsys Technologies PLC
30 June 2017
AIM: AXS
Euronext Amsterdam: AXS
30 June 2017
ACCSYS TECHNOLOGIES PLC
("Accsys" or "the Company")
Total Voting Rights
Further to the recent announcement of the issue of 97,720
ordinary shares of EUR0.05 each in the capital of the Company
pursuant to the Employment Benefit Trust, and pursuant to 5.6.1 of
the Disclosure and Transparency Rules, the Company notifies the
market of the following:
The issued share capital of the Company now consists of
111,065,291 ordinary shares of EUR0.05 each with voting rights. No
ordinary shares are held in treasury.
The above figure of 111,065,291 ordinary shares may be used by
shareholders as the denominator for the calculations by which they
will determine if they are required to notify their interest in, or
a change to their interest in, the Company under the FCA's
Disclosure and Transparency Rules. This figure replaces and
supersedes any figure previously announced.
Ends
For further information, please contact:
Accsys Technologies Paul Clegg, CEO via MHP Communications
PLC Will Rudge, FD
Hans Pauli, Executive Director,
Corporate
Development
Nominated Adviser: Oliver
Cardigan
Jamie Lillywhite
Corporate Broking: Christopher
Wilkinson +44 (0) 20 7260
Numis Securities Ben Stoop 1000
Tim Rowntree +44 (0) 20 3128
MHP Communications Kelsey Traynor 8100
+31 681 734 236
Frank Neervoort +31 2 22 37 96
Off the Grid (The Netherlands) Yvonne Derske 66
Notes to editors:
Accsys Technologies PLC (www.accsysplc.com) is a chemical
technology group whose primary focus is on the production of
Accoya(R) wood and technology licensing via its subsidiary, Titan
Wood Limited, which has manufacturing operations in Arnhem, the
Netherlands (through its subsidiary Titan Wood B.V.), a European
office in London, United Kingdom, an American office in Dallas,
Texas (via its subsidiary Titan Wood, Inc) and technology licencing
associated with the acetylation of wood elements via its subsidiary
Tricoya Technologies Limited. Any references in this announcement
to agreements with Accsys shall mean agreements with either Accsys
or its subsidiary entities unless otherwise specified. Accsys
Technologies PLC is listed on the London Stock Exchange AIM market
and on Euronext Amsterdam, under the symbols 'AXS'. Accsys'
operations comprise three principal business units: (i) Accoya(R)
wood production; (ii) technology development, focused on a
programme of continuous development of and improvements to the
process engineering and operating protocols for the acetylation of
solid wood and the development of technology for the acetylation of
wood elements; and (iii) the licensing of technology for the
production of Accoya(R) wood and Tricoya(R) wood elements across
the globe.
Accoya(R) wood (www.accoya.com ) is produced using Accsys'
proprietary patented acetylation technology, that effectively
converts sustainably grown softwoods and non-durable hardwoods into
what is best described as a "high technology wood". Distinguished
by its durability, dimensional stability and, perhaps most
importantly of all, its reliability (in terms of consistency of
both supply and quality), Accoya(R) wood is particularly suited to
exterior applications where performance and appearance are valued.
Unlike most tropical and European hardwoods, its colour does not
degrade when exposed to ultraviolet light. Moreover, the Accoya(R)
wood production process does not compromise the wood's strength or
machinability. The combination of UV resistance, dimensional
stability, durability and retained strength means that Accoya(R)
wood offers a wealth of new opportunities to architects, designers
and specifiers. These benefits result in lower maintenance and
total cost of ownership while using a higher sustainable and
environmental responsible building material. For a full archive of
Accoya(R) news, visit www.accoya.com/news.asp.
Tricoya(R) Wood Elements (www.tricoya.com) are produced using
Accsys' proprietary technology for the acetylation of wood chips,
and particles for use in the fabrication of panel products such as
medium density fibreboard and particle-board. These products
demonstrate enhanced durability and dimensional stability which
allow them to be used in a variety of applications that were once
limited to solid wood or man-made products. Exploitation of Accsys'
proprietary technology relating to Tricoya(R) Wood Elements is
carried out through Tricoya Technologies Limited. Tricoya(R) Wood
Elements are lauded as the first major innovation in the wood
composites industry in more than 30 years.
Wood Acetylation is a process which increases the amount of
'acetyl' molecules in wood, thereby changing its physical
properties. When carried out to a sufficient level throughout the
wood, this process protects wood from rot by making it "inedible"
to most micro-organisms and fungi, without - unlike conventional
treatments - making it toxic. It also greatly reduces the wood's
tendency to swell and shrink, making it less prone to cracking and
ensuring that, when painted, it requires dramatically reduced
maintenance.
Accsys Technologies is the trading name of Titan Wood Limited.
ACCOYA(R) , TRICOYA(R) and the Trimarque Device are registered
trademarks owned by Titan Wood Limited ("TWL"), a wholly owned
subsidiary of Accsys Technologies PLC, and may not be used or
reproduced without written permission from TWL, or in the case of
the Tricoya(R) registered trademark, from Tricoya Technologies
Limited, a subsidiary of TWL with exclusive rights to exploit the
Tricoya(R) brand.
This information is provided by RNS
The company news service from the London Stock Exchange
END
TVRWGUPGQUPMUBU
(END) Dow Jones Newswires
June 30, 2017 05:13 ET (09:13 GMT)
Accsys Technologies (LSE:AXS)
Historical Stock Chart
From Aug 2024 to Sep 2024
Accsys Technologies (LSE:AXS)
Historical Stock Chart
From Sep 2023 to Sep 2024