Riz-ape-atp
15 years ago
The CLT3-4BT6 (current limited termination) is a quadruple input digital termination device designed for 24V DC automation applications. It achieves the front-end circuitry of a digital input module (I/O) in industrial automation.
Available in a four channels configuration, it offers a high-density termination by minimizing the external component count. It is housed in a TSSOP20 surface mount package to reduce the printed board size.
Made of a parallel input voltage protection, a serial input-output current limiting circuit and an opto-coupler driver, each channel circuit terminates the connection between the logic input and the associated high side sensor or switch.
The CLT3-4BT6 device is used between the sensors and the opto-coupler of an input module. The current limiting circuit, connected between the input and the output pins, is compensated all over the temperature range. Furthermore, each channel runs independently of the other. Thanks to its low tolerance, the current limitation allows the drastic reduction of the dissipation compared to a resistive input: the overall module requires less cooling capability and becomes smaller.
The output block of each termination channel controls the operation of an opto-coupler that is internally enabled by a LED. When the input current is less than 1.5mA, an integrated output circuit derivates the input current to maintain the opto-coupler off.
When the CLT input voltage VIN is higher than 5V (that corresponds to a module input voltage higher than 11V with a 1.2kW serial resistor), a minimum output current of 1.5mA secures the opto-coupler in the on state.
The CLT3-4BT6 protects the input module against transient electromagnetic interferences such as those described in the IEC61131-2 standard. The opto-coupler plays a role in the CLT3-4BT6 operation. The drop voltage of its input diode introduces a voltage offset in series with the CLT3-4BT6 channel: for a good CLT3-4BT6 operation, this drop voltage should remain below 2V.
Golden Cross
18 years ago
SSTI - SST Announces Single-Chip Controller Targeting Portable Applications
Monday April 17, 3:05 am ET
Mobile Platform Controller Combines Keyboard Controller, Power Management Controller and 8 Mbits of LPC Firmware Flash
SUNNYVALE, Calif., April 17 /PRNewswire-FirstCall/ -- SST (Silicon Storage Technology, Inc.) (Nasdaq: SSTI - News), a leader in flash memory technology, today announced the industry's first single-chip, fully integrated mobile platform controller targeting mobile devices. The SST79LF008 Mobile Platform Controller enables designers to reduce overall system cost, enhance reliability and increase security protection by integrating into a single device 8 Mbits of LPC Firmware Flash along with a mobile platform controller for human input devices. The single-chip controller also features an Advanced Configuration and Power Interface (ACPI)-compatible embedded controller for power management and system configuration controls. SST's Mobile Platform Controller builds on the company's history of providing leading-edge SuperFlash-based BIOS solutions.
"For mobile designers, board space, power consumption and reliability are critical success factors," said Michael Briner, senior vice president of SST's Application Specific Product Group. "SST leveraged its leading-edge BIOS flash and 8051 technologies in developing the Mobile Platform Controller. This device is fully compatible with the most advanced LPC specification and replaces designer's current two or three chip solutions with a single chip."
SST's Mobile Platform Controller offers higher performance than a standard 8051 microcontroller and enables significantly higher efficiency. Utilizing SST's proprietary SuperFlash technology, the Mobile Platform Controller features an 8-Mbit LPC Firmware Flash and an SST-enhanced high-performance 8051 microcontroller core with three or six-clock machine cycle and 33-MHz max operating clock frequency. An SST three-wire Alternate LPC (aLPC) interface allows for rapid factory programming of the entire flash memory with Auto Address Increment Mode (AAI).
The 8 Mbit on-chip shared SuperFlash memory in the controller provides storage for system BIOS as well as keyboard and embedded controller firmware. The 4-KByte sectors and 64-KByte blocks allow flexible erase capabilities. All standard LPC Firmware memory functions are supported in addition to advanced features such as LPC 1.1 multi-byte read/write protocols.
Enhanced Security
For increased security, the Mobile Platform Controller features a 4-KByte secure area with lock-down capability that can be unlocked in hardware only. The system software utilizes these advanced security features by selectively restricting access to different blocks of the flash memory, and protecting the flash memory from accidental or malicious code modifications. The on-chip integration of the microcontroller core and firmware flash memory enables notebook PC designers to implement cryptographic BIOS flash protection mechanisms in embedded controller firmware.
The on-chip keyboard controller modules in the Mobile Platform Controller offer a number of features for the management of human input devices. The device includes an industry standard 8042 compatible host interface, matrix keyboard scanner, and three generic PS/2 ports for internal pointing device, external keyboard and mouse.
Through the integrated SMBus, ADC, DAC, PWM and other ACPI embedded controller modules, SST's Mobile Platform Controller can manage thermal sensors, the CPU fan, platform power planes as well as battery usage and charging operation. The expanded set of configurable LPC I/O host interfaces (one 8042 style interface, two ACPI style interfaces, and one mailbox interface) eliminates synchronization problems in system driver communication with the embedded controller firmware. The device's GPIOs provide system wake-up capability, removing design limitations imposed by dedicated wake-up inputs, common with competing solutions.
The AAI fast-programming mode of the three-wire aLPC interface in the Mobile Platform Controller allows the entire flash memory to be programmed (12 seconds typical) without re-issuing subsequent addresses and with just one command. This advantage is especially useful during the manufacturing process, where fast production line throughput is essential. The innovative aLPC interface also enables field resurrection of a nonfunctioning portable device by simply flashing the BIOS.
Pricing and Availability
The SST79LF008 Mobile Platform Controller featuring 8-Mbit LPC Firmware Flash is available now in both LQFP and TFBGA 176-pin packages. Pricing for the Mobile Platform Controller is $3.50 in 10K unit quantities. For more information about SST and its family of products, visit the company's Web site at http://www.sst.com.
About Silicon Storage Technology, Inc.
Headquartered in Sunnyvale, California, SST designs, manufactures and markets a diversified range of memory and non-memory products for high volume applications in the digital consumer, networking, wireless communications and Internet computing markets. Leveraging its proprietary, patented SuperFlash technology, SST is a leading provider of nonvolatile memory solutions with product families that include various densities of high functionality flash memory components and flash mass storage products. The Company also offers its SuperFlash technology for embedded applications through its broad network of world-class manufacturing partners and technology licensees, including TSMC, which offers it under its trademark Emb-FLASH. SST's non-memory products include NAND controllers, smart card ICs, flash microcontrollers and radio frequency ICs and modules. Further information on SST can be found on the company's Web site at http://www.sst.com.
Forward-Looking Statements
Except for the historical information contained herein, this news release contains forward-looking statements regarding flash memory and wireless communication market conditions, the company's future financial performance, the performance of new products and the company's ability to bring new products to market that involve risks and uncertainties. These risks may include timely development, acceptance and pricing of new products, the terms and conditions associated with licensees' royalty payments, the impact of competitive products and pricing, and general economic conditions as they affect the company's customers, as well as other risks detailed from time to time in the company's SEC reports, including the Annual Report on Form 10-K for the year ended December 31, 2004 and on Form 10-Q for the quarters ended March 31, June 30, and September 30, 2005.
For more information about SST and the company's comprehensive list of product offerings, please call 1-888-SST-CHIP. Information can also be requested via email to literature@sst.com or through SST's Web site at http://www.sst.com. SST's head office is located at 1171 Sonora Court, Sunnyvale, Calif.; telephone: 408-735-9110; fax: 408-735-9036.
NOTE: The SST logo and SuperFlash are registered trademarks of Silicon Storage Technology, Inc. Emb-FLASH is a trademark of TSMC. All other trademarks or registered trademarks are the property of their respective holders.
For More Information Contact:
Sasha Afanasieff
Silicon Storage Technology, Inc.
408-522-7310
aafanasieff@sst.com
Steve Gabriel
Porter Novelli
408-369-4600 x627
steve.gabriel@porternovelli.com