0000704532 --12-31 2022 Q1 false http://fasb.org/us-gaap/2021-01-31#OtherLiabilitiesNoncurrent http://fasb.org/us-gaap/2021-01-31#OtherLiabilitiesNoncurrent 0000704532 2022-01-02 2022-04-02 xbrli:shares 0000704532 2022-04-19 iso4217:USD 0000704532 2020-12-27 2021-03-27 iso4217:USD xbrli:shares 0000704532 2022-04-02 0000704532 2022-01-02 0000704532 2022-01-01 0000704532 2020-12-26 0000704532 2021-03-27 0000704532 us-gaap:CommonStockMember 2022-01-01 0000704532 us-gaap:AdditionalPaidInCapitalMember 2022-01-01 0000704532 us-gaap:AccumulatedOtherComprehensiveIncomeMember 2022-01-01 0000704532 us-gaap:RetainedEarningsMember 2022-01-01 0000704532 us-gaap:RetainedEarningsMember 2022-01-02 2022-04-02 0000704532 us-gaap:AdditionalPaidInCapitalMember 2022-01-02 2022-04-02 0000704532 us-gaap:CommonStockMember 2022-01-02 2022-04-02 0000704532 us-gaap:AccumulatedOtherComprehensiveIncomeMember 2022-01-02 2022-04-02 0000704532 us-gaap:CommonStockMember 2022-04-02 0000704532 us-gaap:AdditionalPaidInCapitalMember 2022-04-02 0000704532 us-gaap:AccumulatedOtherComprehensiveIncomeMember 2022-04-02 0000704532 us-gaap:RetainedEarningsMember 2022-04-02 0000704532 us-gaap:CommonStockMember 2020-12-26 0000704532 us-gaap:AdditionalPaidInCapitalMember 2020-12-26 0000704532 us-gaap:AccumulatedOtherComprehensiveIncomeMember 2020-12-26 0000704532 us-gaap:RetainedEarningsMember 2020-12-26 0000704532 us-gaap:RetainedEarningsMember 2020-12-27 2021-03-27 0000704532 us-gaap:AdditionalPaidInCapitalMember 2020-12-27 2021-03-27 0000704532 us-gaap:CommonStockMember 2020-12-27 2021-03-27 0000704532 us-gaap:AccumulatedOtherComprehensiveIncomeMember 2020-12-27 2021-03-27 0000704532 us-gaap:CommonStockMember 2021-03-27 0000704532 us-gaap:AdditionalPaidInCapitalMember 2021-03-27 0000704532 us-gaap:AccumulatedOtherComprehensiveIncomeMember 2021-03-27 0000704532 us-gaap:RetainedEarningsMember 2021-03-27 0000704532 onto:InspectrologyLLCMember 2020-12-27 2021-03-27 0000704532 onto:InspectrologyLLCMember 2022-01-01 0000704532 onto:InspectrologyLLCMember srt:MaximumMember 2020-12-27 2021-03-27 0000704532 onto:InspectrologyLLCMember 2022-04-02 0000704532 onto:InspectrologyLLCMember srt:MinimumMember 2022-01-02 2022-04-02 0000704532 onto:InspectrologyLLCMember srt:MaximumMember 2022-01-02 2022-04-02 0000704532 us-gaap:CarryingReportedAmountFairValueDisclosureMember us-gaap:FairValueMeasurementsRecurringMember us-gaap:USStatesAndPoliticalSubdivisionsMember 2022-04-02 0000704532 us-gaap:FairValueInputsLevel1Member us-gaap:FairValueMeasurementsRecurringMember us-gaap:USStatesAndPoliticalSubdivisionsMember 2022-04-02 0000704532 us-gaap:FairValueInputsLevel2Member us-gaap:FairValueMeasurementsRecurringMember us-gaap:USStatesAndPoliticalSubdivisionsMember 2022-04-02 0000704532 us-gaap:FairValueInputsLevel3Member us-gaap:FairValueMeasurementsRecurringMember us-gaap:USStatesAndPoliticalSubdivisionsMember 2022-04-02 0000704532 us-gaap:CarryingReportedAmountFairValueDisclosureMember us-gaap:FairValueMeasurementsRecurringMember us-gaap:AssetBackedSecuritiesMember 2022-04-02 0000704532 us-gaap:FairValueInputsLevel1Member us-gaap:FairValueMeasurementsRecurringMember us-gaap:AssetBackedSecuritiesMember 2022-04-02 0000704532 us-gaap:FairValueInputsLevel2Member us-gaap:FairValueMeasurementsRecurringMember us-gaap:AssetBackedSecuritiesMember 2022-04-02 0000704532 us-gaap:FairValueInputsLevel3Member us-gaap:FairValueMeasurementsRecurringMember us-gaap:AssetBackedSecuritiesMember 2022-04-02 0000704532 us-gaap:CarryingReportedAmountFairValueDisclosureMember us-gaap:FairValueMeasurementsRecurringMember us-gaap:CertificatesOfDepositMember 2022-04-02 0000704532 us-gaap:FairValueInputsLevel1Member us-gaap:FairValueMeasurementsRecurringMember us-gaap:CertificatesOfDepositMember 2022-04-02 0000704532 us-gaap:FairValueInputsLevel2Member us-gaap:FairValueMeasurementsRecurringMember us-gaap:CertificatesOfDepositMember 2022-04-02 0000704532 us-gaap:FairValueInputsLevel3Member us-gaap:FairValueMeasurementsRecurringMember us-gaap:CertificatesOfDepositMember 2022-04-02 0000704532 us-gaap:CarryingReportedAmountFairValueDisclosureMember us-gaap:FairValueMeasurementsRecurringMember us-gaap:CommercialPaperNotIncludedWithCashAndCashEquivalentsMember 2022-04-02 0000704532 us-gaap:FairValueInputsLevel1Member us-gaap:FairValueMeasurementsRecurringMember us-gaap:CommercialPaperNotIncludedWithCashAndCashEquivalentsMember 2022-04-02 0000704532 us-gaap:FairValueInputsLevel2Member us-gaap:FairValueMeasurementsRecurringMember us-gaap:CommercialPaperNotIncludedWithCashAndCashEquivalentsMember 2022-04-02 0000704532 us-gaap:FairValueInputsLevel3Member us-gaap:FairValueMeasurementsRecurringMember us-gaap:CommercialPaperNotIncludedWithCashAndCashEquivalentsMember 2022-04-02 0000704532 us-gaap:CarryingReportedAmountFairValueDisclosureMember us-gaap:FairValueMeasurementsRecurringMember us-gaap:CorporateDebtSecuritiesMember 2022-04-02 0000704532 us-gaap:FairValueInputsLevel1Member us-gaap:FairValueMeasurementsRecurringMember us-gaap:CorporateDebtSecuritiesMember 2022-04-02 0000704532 us-gaap:FairValueInputsLevel2Member us-gaap:FairValueMeasurementsRecurringMember us-gaap:CorporateDebtSecuritiesMember 2022-04-02 0000704532 us-gaap:FairValueInputsLevel3Member us-gaap:FairValueMeasurementsRecurringMember us-gaap:CorporateDebtSecuritiesMember 2022-04-02 0000704532 us-gaap:CarryingReportedAmountFairValueDisclosureMember us-gaap:FairValueMeasurementsRecurringMember 2022-04-02 0000704532 us-gaap:FairValueInputsLevel1Member us-gaap:FairValueMeasurementsRecurringMember 2022-04-02 0000704532 us-gaap:FairValueInputsLevel2Member us-gaap:FairValueMeasurementsRecurringMember 2022-04-02 0000704532 us-gaap:FairValueInputsLevel3Member us-gaap:FairValueMeasurementsRecurringMember 2022-04-02 0000704532 us-gaap:CarryingReportedAmountFairValueDisclosureMember us-gaap:FairValueMeasurementsRecurringMember us-gaap:USStatesAndPoliticalSubdivisionsMember 2022-01-01 0000704532 us-gaap:FairValueInputsLevel1Member us-gaap:FairValueMeasurementsRecurringMember us-gaap:USStatesAndPoliticalSubdivisionsMember 2022-01-01 0000704532 us-gaap:FairValueInputsLevel2Member us-gaap:FairValueMeasurementsRecurringMember us-gaap:USStatesAndPoliticalSubdivisionsMember 2022-01-01 0000704532 us-gaap:FairValueInputsLevel3Member us-gaap:FairValueMeasurementsRecurringMember us-gaap:USStatesAndPoliticalSubdivisionsMember 2022-01-01 0000704532 us-gaap:CarryingReportedAmountFairValueDisclosureMember us-gaap:FairValueMeasurementsRecurringMember us-gaap:AssetBackedSecuritiesMember 2022-01-01 0000704532 us-gaap:FairValueInputsLevel1Member us-gaap:FairValueMeasurementsRecurringMember us-gaap:AssetBackedSecuritiesMember 2022-01-01 0000704532 us-gaap:FairValueInputsLevel2Member us-gaap:FairValueMeasurementsRecurringMember us-gaap:AssetBackedSecuritiesMember 2022-01-01 0000704532 us-gaap:FairValueInputsLevel3Member us-gaap:FairValueMeasurementsRecurringMember us-gaap:AssetBackedSecuritiesMember 2022-01-01 0000704532 us-gaap:CarryingReportedAmountFairValueDisclosureMember us-gaap:FairValueMeasurementsRecurringMember us-gaap:CertificatesOfDepositMember 2022-01-01 0000704532 us-gaap:FairValueInputsLevel1Member us-gaap:FairValueMeasurementsRecurringMember us-gaap:CertificatesOfDepositMember 2022-01-01 0000704532 us-gaap:FairValueInputsLevel2Member us-gaap:FairValueMeasurementsRecurringMember us-gaap:CertificatesOfDepositMember 2022-01-01 0000704532 us-gaap:FairValueInputsLevel3Member us-gaap:FairValueMeasurementsRecurringMember us-gaap:CertificatesOfDepositMember 2022-01-01 0000704532 us-gaap:CarryingReportedAmountFairValueDisclosureMember us-gaap:FairValueMeasurementsRecurringMember us-gaap:CommercialPaperNotIncludedWithCashAndCashEquivalentsMember 2022-01-01 0000704532 us-gaap:FairValueInputsLevel1Member us-gaap:FairValueMeasurementsRecurringMember us-gaap:CommercialPaperNotIncludedWithCashAndCashEquivalentsMember 2022-01-01 0000704532 us-gaap:FairValueInputsLevel2Member us-gaap:FairValueMeasurementsRecurringMember us-gaap:CommercialPaperNotIncludedWithCashAndCashEquivalentsMember 2022-01-01 0000704532 us-gaap:FairValueInputsLevel3Member us-gaap:FairValueMeasurementsRecurringMember us-gaap:CommercialPaperNotIncludedWithCashAndCashEquivalentsMember 2022-01-01 0000704532 us-gaap:CarryingReportedAmountFairValueDisclosureMember us-gaap:FairValueMeasurementsRecurringMember us-gaap:CorporateDebtSecuritiesMember 2022-01-01 0000704532 us-gaap:FairValueInputsLevel1Member us-gaap:FairValueMeasurementsRecurringMember us-gaap:CorporateDebtSecuritiesMember 2022-01-01 0000704532 us-gaap:FairValueInputsLevel2Member us-gaap:FairValueMeasurementsRecurringMember us-gaap:CorporateDebtSecuritiesMember 2022-01-01 0000704532 us-gaap:FairValueInputsLevel3Member us-gaap:FairValueMeasurementsRecurringMember us-gaap:CorporateDebtSecuritiesMember 2022-01-01 0000704532 us-gaap:CarryingReportedAmountFairValueDisclosureMember us-gaap:FairValueMeasurementsRecurringMember 2022-01-01 0000704532 us-gaap:FairValueInputsLevel1Member us-gaap:FairValueMeasurementsRecurringMember 2022-01-01 0000704532 us-gaap:FairValueInputsLevel2Member us-gaap:FairValueMeasurementsRecurringMember 2022-01-01 0000704532 us-gaap:FairValueInputsLevel3Member us-gaap:FairValueMeasurementsRecurringMember 2022-01-01 0000704532 us-gaap:USTreasuryAndGovernmentMember 2022-04-02 0000704532 us-gaap:AssetBackedSecuritiesMember 2022-04-02 0000704532 us-gaap:CertificatesOfDepositMember 2022-04-02 0000704532 us-gaap:CommercialPaperNotIncludedWithCashAndCashEquivalentsMember 2022-04-02 0000704532 us-gaap:CorporateDebtSecuritiesMember 2022-04-02 0000704532 us-gaap:USTreasuryAndGovernmentMember 2022-01-01 0000704532 us-gaap:AssetBackedSecuritiesMember 2022-01-01 0000704532 us-gaap:CertificatesOfDepositMember 2022-01-01 0000704532 us-gaap:CommercialPaperNotIncludedWithCashAndCashEquivalentsMember 2022-01-01 0000704532 us-gaap:CorporateDebtSecuritiesMember 2022-01-01 0000704532 us-gaap:DevelopedTechnologyRightsMember 2022-04-02 0000704532 us-gaap:CustomerRelationshipsMember 2022-04-02 0000704532 us-gaap:TrademarksAndTradeNamesMember 2022-04-02 0000704532 us-gaap:DevelopedTechnologyRightsMember 2022-01-01 0000704532 us-gaap:CustomerRelationshipsMember 2022-01-01 0000704532 us-gaap:TrademarksAndTradeNamesMember 2022-01-01 0000704532 us-gaap:MachineryAndEquipmentMember 2022-04-02 0000704532 us-gaap:MachineryAndEquipmentMember 2022-01-01 0000704532 us-gaap:LandAndBuildingMember 2022-04-02 0000704532 us-gaap:LandAndBuildingMember 2022-01-01 0000704532 onto:ComputerEquipmentAndSoftwareMember 2022-04-02 0000704532 onto:ComputerEquipmentAndSoftwareMember 2022-01-01 0000704532 us-gaap:LeaseholdImprovementsMember 2022-04-02 0000704532 us-gaap:LeaseholdImprovementsMember 2022-01-01 0000704532 us-gaap:FurnitureAndFixturesMember 2022-04-02 0000704532 us-gaap:FurnitureAndFixturesMember 2022-01-01 0000704532 srt:MinimumMember 2022-01-02 2022-04-02 0000704532 srt:MaximumMember 2022-01-02 2022-04-02 xbrli:pure 0000704532 us-gaap:TransferredAtPointInTimeMember 2022-01-02 2022-04-02 0000704532 us-gaap:TransferredAtPointInTimeMember 2020-12-27 2021-03-27 0000704532 us-gaap:TransferredOverTimeMember 2022-01-02 2022-04-02 0000704532 us-gaap:TransferredOverTimeMember 2020-12-27 2021-03-27 0000704532 us-gaap:RestrictedStockUnitsRSUMember 2022-01-01 0000704532 us-gaap:RestrictedStockUnitsRSUMember 2022-01-02 2022-04-02 0000704532 us-gaap:RestrictedStockUnitsRSUMember 2022-04-02 0000704532 onto:RestrictedStockUnitsServiceBasedRSUsMember 2022-04-02 0000704532 onto:PerformanceRestrictedStockUnitsMember 2022-04-02 0000704532 onto:PerformanceRestrictedStockUnitsMember 2022-01-01 0000704532 us-gaap:RestrictedStockUnitsRSUMember 2021-01-02 2022-01-01 0000704532 us-gaap:AccumulatedTranslationAdjustmentMember 2022-01-01 0000704532 us-gaap:AccumulatedNetUnrealizedInvestmentGainLossMember 2022-01-01 0000704532 us-gaap:AccumulatedTranslationAdjustmentMember 2022-01-02 2022-04-02 0000704532 us-gaap:AccumulatedNetUnrealizedInvestmentGainLossMember 2022-01-02 2022-04-02 0000704532 us-gaap:AccumulatedTranslationAdjustmentMember 2022-04-02 0000704532 us-gaap:AccumulatedNetUnrealizedInvestmentGainLossMember 2022-04-02 onto:Segment 0000704532 onto:SystemsAndSoftwareRevenueMember 2022-01-02 2022-04-02 0000704532 onto:PartsRevenueMember 2022-01-02 2022-04-02 0000704532 onto:ServiceRevenueMember 2022-01-02 2022-04-02 0000704532 onto:SystemsAndSoftwareRevenueMember 2020-12-27 2021-03-27 0000704532 onto:PartsRevenueMember 2020-12-27 2021-03-27 0000704532 onto:ServiceRevenueMember 2020-12-27 2021-03-27 0000704532 onto:SystemsAndSoftwareRevenueMember us-gaap:SalesRevenueNetMember us-gaap:ProductConcentrationRiskMember 2022-01-02 2022-04-02 0000704532 onto:PartsRevenueMember us-gaap:SalesRevenueNetMember us-gaap:ProductConcentrationRiskMember 2022-01-02 2022-04-02 0000704532 onto:ServiceRevenueMember us-gaap:SalesRevenueNetMember us-gaap:ProductConcentrationRiskMember 2022-01-02 2022-04-02 0000704532 us-gaap:SalesRevenueNetMember us-gaap:ProductConcentrationRiskMember 2022-01-02 2022-04-02 0000704532 onto:SystemsAndSoftwareRevenueMember us-gaap:SalesRevenueNetMember us-gaap:ProductConcentrationRiskMember 2020-12-27 2021-03-27 0000704532 onto:PartsRevenueMember us-gaap:SalesRevenueNetMember us-gaap:ProductConcentrationRiskMember 2020-12-27 2021-03-27 0000704532 onto:ServiceRevenueMember us-gaap:SalesRevenueNetMember us-gaap:ProductConcentrationRiskMember 2020-12-27 2021-03-27 0000704532 us-gaap:SalesRevenueNetMember us-gaap:ProductConcentrationRiskMember 2020-12-27 2021-03-27 0000704532 country:CN 2022-01-02 2022-04-02 0000704532 country:CN 2020-12-27 2021-03-27 0000704532 country:KR 2022-01-02 2022-04-02 0000704532 country:KR 2020-12-27 2021-03-27 0000704532 country:TW 2022-01-02 2022-04-02 0000704532 country:TW 2020-12-27 2021-03-27 0000704532 country:US 2022-01-02 2022-04-02 0000704532 country:US 2020-12-27 2021-03-27 0000704532 srt:EuropeMember 2022-01-02 2022-04-02 0000704532 srt:EuropeMember 2020-12-27 2021-03-27 0000704532 onto:SoutheastAsiaMember 2022-01-02 2022-04-02 0000704532 onto:SoutheastAsiaMember 2020-12-27 2021-03-27 0000704532 country:JP 2022-01-02 2022-04-02 0000704532 country:JP 2020-12-27 2021-03-27 0000704532 onto:SKHynixIncMember us-gaap:SalesRevenueNetMember us-gaap:CustomerConcentrationRiskMember 2022-01-02 2022-04-02 0000704532 onto:SKHynixIncMember us-gaap:SalesRevenueNetMember us-gaap:CustomerConcentrationRiskMember 2020-12-27 2021-03-27 0000704532 onto:TaiwanSemiconductorManufacturingCompanyLimitedMember us-gaap:SalesRevenueNetMember us-gaap:CustomerConcentrationRiskMember 2022-01-02 2022-04-02 0000704532 onto:TaiwanSemiconductorManufacturingCompanyLimitedMember us-gaap:SalesRevenueNetMember us-gaap:CustomerConcentrationRiskMember 2020-12-27 2021-03-27 0000704532 onto:SamsungSemiconductorMember us-gaap:SalesRevenueNetMember us-gaap:CustomerConcentrationRiskMember 2022-01-02 2022-04-02 0000704532 onto:SamsungSemiconductorMember us-gaap:SalesRevenueNetMember us-gaap:CustomerConcentrationRiskMember 2020-12-27 2021-03-27 0000704532 srt:MaximumMember 2020-11-30

 

Table of Contents

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, D.C. 20549

 

FORM 10-Q

 

(Mark One)

QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the Quarterly Period Ended April 2, 2022

OR

TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from          to

Commission File No. 001-39110

 

ONTO INNOVATION INC.

(Exact name of registrant as specified in its charter)

 

Delaware

 

94-2276314

(State or other jurisdiction of

incorporation or organization)

 

(I.R.S. Employer

Identification Number)

 

16 Jonspin Road, Wilmington, Massachusetts 01887

(Address of principal executive offices, including zip code)

Registrant’s telephone number, including area code: (978) 253-6200

 

Securities registered pursuant to Section 12(b) of the Act

Title of Each Class

Trading Symbol(s)

Name of Each Exchange on Which Registered

Common Stock, $0.001 par value per share

ONTO

New York Stock Exchange (NYSE)

Indicate by check mark whether the registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the Registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes      No  

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit such files).     Yes      No  

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company.  See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

 

Large accelerated filer

 

 

Accelerated filer

Non-accelerated filer

 

 

Smaller reporting company

 

 

 

 

Emerging growth company

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act.  

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).     Yes      No 

The number of outstanding shares of the Registrant’s Common Stock on April 19, 2022 was 49,556,669.

 

 


 

Table of Contents

 

TABLE OF CONTENTS

 

Item No.

 

Page

 

PART I    FINANCIAL INFORMATION

 

 

 

 

Item 1.

Financial Statements (unaudited)

1

 

Condensed Consolidated Statements of Operations for the three months ended April 2, 2022 and March 27, 2021

1

 

Condensed Consolidated Statements of Comprehensive Income for the three months ended April 2, 2022 and March 27, 2021

2

 

Condensed Consolidated Balance Sheets at April 2, 2022 and January 1, 2022

3

 

Condensed Consolidated Statements of Cash Flows for the three months ended April 2, 2022 and March 27, 2021

4

 

Condensed Consolidated Statements of Stockholders’ Equity for the three months ended April 2, 2022 and March 27, 2021

5

 

Notes to Condensed Consolidated Financial Statements

6

Item 2.

Management’s Discussion and Analysis of Financial Condition and Results of Operations

17

Item 3.

Quantitative and Qualitative Disclosures about Market Risk

23

Item 4.

Controls and Procedures

23

 

 

 

 

PART II    OTHER INFORMATION

 

 

 

 

Item 1.

Legal Proceedings

23

Item 1A.

Risk Factors

23

Item 2.

Unregistered Sales of Equity Securities and Use of Proceeds

39

Item 3.

Defaults Upon Senior Securities

39

Item 4.

Mine Safety Disclosures

39

Item 5.

Other Information

39

Item 6.

Exhibits

40

 

Signatures

 


 

Table of Contents

 

PART I FINANCIAL INFORMATION

Item 1. Financial Statements

ONTO INNOVATION INC.

CONDENSED CONSOLIDATED STATEMENTS OF OPERATIONS

(In thousands, except per share data)

(Unaudited)

 

 

 

Three Months Ended

 

 

 

April 2,

 

 

March 27,

 

 

 

2022

 

 

2021

 

Revenue

 

$

241,350

 

 

$

169,279

 

Cost of revenue

 

 

110,327

 

 

 

78,810

 

Gross profit

 

 

131,023

 

 

 

90,469

 

Operating expenses:

 

 

 

 

 

 

 

 

Research and development

 

 

26,341

 

 

 

21,964

 

Sales and marketing

 

 

15,632

 

 

 

13,104

 

General and administrative

 

 

16,487

 

 

 

15,559

 

Amortization

 

 

13,819

 

 

 

12,357

 

Total operating expenses

 

 

72,279

 

 

 

62,984

 

Operating income

 

 

58,744

 

 

 

27,485

 

Interest income, net

 

 

377

 

 

 

361

 

Other expense, net

 

 

(204

)

 

 

(1,244

)

Income before provision for income taxes

 

 

58,917

 

 

 

26,602

 

Provision for income taxes

 

 

5,587

 

 

 

2,489

 

Net income

 

$

53,330

 

 

$

24,113

 

Earnings per share:

 

 

 

 

 

 

 

 

Basic

 

$

1.08

 

 

$

0.49

 

Diluted

 

$

1.07

 

 

$

0.49

 

Weighted average shares outstanding:

 

 

 

 

 

 

 

 

Basic

 

 

49,437

 

 

 

49,000

 

Diluted

 

 

49,915

 

 

 

49,572

 

 

The accompanying notes are an integral part of these financial statements.

1


 

Table of Contents

ONTO INNOVATION INC.

CONDENSED CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME

(In thousands)

(Unaudited)

 

 

 

Three Months Ended

 

 

 

April 2,

 

 

March 27,

 

 

 

2022

 

 

2021

 

Net income

 

$

53,330

 

 

$

24,113

 

Other comprehensive loss, net of tax:

 

 

 

 

 

 

 

 

Change in net unrealized losses on

     available-for-sale marketable securities

 

 

(3,001

)

 

 

(131

)

Change in currency translation adjustments

 

 

(3,612

)

 

 

(1,899

)

Total other comprehensive loss, net of tax

 

 

(6,613

)

 

 

(2,030

)

Total comprehensive income

 

$

46,717

 

 

$

22,083

 

 

The accompanying notes are an integral part of these financial statements.

 


2


 

Table of Contents

 

ONTO INNOVATION INC.

CONDENSED CONSOLIDATED BALANCE SHEETS

(In thousands)

(Unaudited)

 

 

 

April 2,

2022

 

 

January 2,

2022

 

ASSETS

 

 

 

 

 

 

 

 

Current Assets:

 

 

 

 

 

 

 

 

Cash and cash equivalents

 

$

172,463

 

 

$

169,602

 

Marketable securities

 

 

369,448

 

 

 

341,741

 

Accounts receivable, less allowance of $1,526 and $1,303

 

 

206,695

 

 

 

177,205

 

Inventories, net

 

 

263,008

 

 

 

243,108

 

Prepaid expenses and other current assets

 

 

20,628

 

 

 

16,433

 

Total current assets

 

 

1,032,242

 

 

 

948,089

 

Property, plant and equipment, net

 

 

81,689

 

 

 

82,094

 

Goodwill

 

 

315,811

 

 

 

315,811

 

Identifiable intangible assets, net

 

 

263,512

 

 

 

277,281

 

Deferred income taxes

 

 

4,669

 

 

 

4,822

 

Other assets

 

 

24,484

 

 

 

21,716

 

Total assets

 

$

1,722,407

 

 

$

1,649,813

 

LIABILITIES AND STOCKHOLDERS’ EQUITY

 

 

 

 

 

 

 

 

Current liabilities:

 

 

 

 

 

 

 

 

Accounts payable

 

$

70,757

 

 

$

53,345

 

Accrued liabilities

 

 

37,741

 

 

 

43,042

 

Deferred revenue

 

 

36,462

 

 

 

29,979

 

Other current liabilities

 

 

39,719

 

 

 

28,160

 

Total current liabilities

 

 

184,679

 

 

 

154,526

 

Deferred income taxes

 

 

33,396

 

 

 

40,281

 

Other non-current liabilities

 

 

32,011

 

 

 

28,951

 

Total liabilities

 

 

250,086

 

 

 

223,758

 

Commitments and contingencies

 

 

 

 

 

 

 

 

Stockholders’ equity:

 

 

 

 

 

 

 

 

Common stock

 

 

49

 

 

 

49

 

Additional paid-in capital

 

 

1,255,728

 

 

 

1,256,179

 

Accumulated other comprehensive (loss) income

 

 

(5,297

)

 

 

1,316

 

Retained earnings

 

 

221,841

 

 

 

168,511

 

Total stockholders’ equity

 

 

1,472,321

 

 

 

1,426,055

 

Total liabilities and stockholders’ equity

 

$

1,722,407

 

 

$

1,649,813

 

 

The accompanying notes are an integral part of these financial statements.

 


3


 

Table of Contents

 

ONTO INNOVATION INC.

CONDENSED CONSOLIDATED STATEMENTS OF CASH FLOWS

(In thousands)

(Unaudited)

 

 

 

Three Months Ended

 

 

 

April 2,

 

 

March 27,

 

 

 

2022

 

 

2021

 

Cash flows from operating activities:

 

 

 

 

 

 

 

 

Net income

 

$

53,330

 

 

$

24,113

 

Adjustments to reconcile net income to net cash and cash equivalents provided by

operating activities:

 

 

 

 

 

 

 

 

Amortization of intangibles

 

 

13,819

 

 

 

12,357

 

Depreciation

 

 

2,366

 

 

 

3,618

 

Share-based compensation

 

 

4,832

 

 

 

4,890

 

Acquired inventory step-up amortization

 

 

 

 

 

252

 

Provision for inventory valuation

 

 

2,115

 

 

 

2,267

 

Deferred income taxes

 

 

(6,848

)

 

 

460

 

Other, net

 

 

1,226

 

 

 

1,713

 

Changes in operating assets and liabilities, net of effects of business acquired

 

 

(25,384

)

 

 

1,329

 

Net cash and cash equivalents provided by operating activities

 

 

45,456

 

 

 

50,999

 

Cash flows from investing activities:

 

 

 

 

 

 

 

 

Purchases of marketable securities

 

 

(97,490

)

 

 

(83,652

)

Proceeds from maturities and sales of marketable securities

 

 

66,684

 

 

 

53,973

 

Purchase of business, net of cash acquired

 

 

 

 

 

(26,795

)

Purchases of property, plant and equipment

 

 

(2,494

)

 

 

(3,875

)

Net cash and cash equivalents used in investing activities

 

 

(33,300

)

 

 

(60,349

)

Cash flows from financing activities:

 

 

 

 

 

 

 

 

Tax payments related to shares withheld for share-based compensation plans

 

 

(5,289

)

 

 

(2,492

)

Payment of contingent consideration for acquired business

 

 

(2,287

)

 

 

 

Issuance of shares through share-based compensation plans

 

 

6

 

 

 

3,085

 

Net cash and cash equivalents used in financing activities

 

 

(7,570

)

 

 

593

 

Effect of exchange rate changes on cash and cash equivalents

 

 

(1,725

)

 

 

(1,513

)

Net increase (decrease) in cash and cash equivalents

 

 

2,861

 

 

 

(10,270

)

Cash and cash equivalents at beginning of period

 

 

169,602

 

 

 

136,720

 

Cash and cash equivalents at end of period

 

$

172,463

 

 

$

126,450

 

 

 

 

 

 

 

 

 

 

Supplemental disclosure of cash flow information:

 

 

 

 

 

 

 

 

Income taxes paid (net of refunds)

 

$

1,331

 

 

$

1,799

 

 

The accompanying notes are an integral part of these financial statements.

 


4


 

Table of Contents

 

ONTO INNOVATION INC.

CONDENSED CONSOLIDATED STATEMENTS OF STOCKHOLDERS’ EQUITY

(In thousands)

(Unaudited)

 

 

Common Stock

 

 

Additional Paid-in

 

 

Accumulated

Other

Comprehensive

 

 

Retained

 

 

 

 

 

 

 

Shares

 

 

Amount

 

 

Capital

 

 

Loss

 

 

Earnings

 

 

Total

 

Balance at January 1, 2022

 

 

49,300

 

 

$

49

 

 

$

1,256,179

 

 

$

1,316

 

 

$

168,511

 

 

$

1,426,055

 

Net income

 

 

 

 

 

 

 

 

 

 

 

 

 

 

53,330

 

 

 

53,330

 

Share-based compensation

 

 

 

 

 

 

 

 

4,832

 

 

 

 

 

 

 

 

 

4,832

 

Issuance of shares through share-based

   compensation plans

 

 

184

 

 

 

 

 

 

6

 

 

 

 

 

 

 

 

 

6

 

Share-based compensation plan

    withholdings

 

 

(46

)

 

 

 

 

 

(5,289

)

 

 

 

 

 

 

 

 

(5,289

)

Currency translation

 

 

 

 

 

 

 

 

 

 

 

(3,612

)

 

 

 

 

 

(3,612

)

Unrealized loss on investments

 

 

 

 

 

 

 

 

 

 

 

(3,001

)

 

 

 

 

 

(3,001

)

Balance at April 2, 2022

 

 

49,438

 

 

$

49

 

 

$

1,255,728

 

 

$

(5,297

)

 

$

221,841

 

 

$

1,472,321

 

 

 

 

 

Common Stock

 

 

Additional Paid-in

 

 

Accumulated

Other

Comprehensive

 

 

Retained

 

 

 

 

 

 

 

Shares

 

 

Amount

 

 

Capital

 

 

Income

 

 

Earnings

 

 

Total

 

Balance at December 26, 2020

 

 

48,758

 

 

$

49

 

 

$

1,233,967

 

 

$

4,568

 

 

$

26,162

 

 

$

1,264,746

 

Net income

 

 

 

 

 

 

 

 

 

 

 

 

 

 

24,113

 

 

 

24,113

 

Share-based compensation

 

 

 

 

 

 

 

 

4,890

 

 

 

 

 

 

 

 

 

4,890

 

Issuance of shares through share-based

   compensation plans

 

 

240

 

 

 

 

 

 

3,085

 

 

 

 

 

 

 

 

 

3,085

 

Share-based compensation plan

    withholdings

 

 

(41

)

 

 

 

 

 

(2,492

)

 

 

 

 

 

 

 

 

(2,492

)

Currency translation

 

 

 

 

 

 

 

 

 

 

 

(1,899

)

 

 

 

 

 

(1,899

)

Unrealized loss on investments

 

 

 

 

 

 

 

 

 

 

 

(131

)

 

 

 

 

 

(131

)

Balance at March 27, 2021

 

 

48,957

 

 

$

49

 

 

$

1,239,450

 

 

$

2,538

 

 

$

50,275

 

 

$

1,292,312

 

 

 

The accompanying notes are an integral part of these financial statements.

5


 

Table of Contents

ONTO INNOVATION INC.

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS

(In thousands, except per share data)

(Unaudited)

 

NOTE 1. Basis of Presentation

The Company operates on a 52- or 53-week fiscal year ending on the Saturday closest to December 31st. Our fiscal year ending December 31, 2022 (“fiscal year 2022”) is a 52-week fiscal year. The first quarter of the Company’s fiscal year 2022 ended on April 2, 2022, the second quarter ends on July 1, 2022 and the third quarter ends on October 1, 2022. Our fiscal year ended January 1, 2022 was a 53-week fiscal year.

The accompanying interim unaudited Condensed Consolidated Financial Statements have been prepared by Onto Innovation Inc. (together with its consolidated subsidiaries, unless otherwise specified or suggested by the context, the “Company,” or “Onto Innovation,” “we,” “our” or “us”) and in the opinion of management reflect all adjustments, consisting of normal recurring accruals, necessary for their fair presentation in accordance with accounting principles generally accepted in the United States of America (“U.S. GAAP”).  Preparing financial statements requires management to make estimates and assumptions that affect amounts reported in the financial statements and accompanying notes.  Actual amounts could differ materially from reported amounts.  The interim results for the three months ended April 2, 2022 are not necessarily indicative of results to be expected for the entire year or any future periods.  This interim financial information should be read in conjunction with the financial statements and the notes thereto included in the Company’s Annual Report on Form 10-K for the year ended January 1, 2022 (the “2021 Form 10-K”) filed with the Securities and Exchange Commission (“SEC”) on February 25, 2022.  The accompanying Condensed Consolidated Balance Sheet at January 1, 2022 has been derived from the audited consolidated financial statements included in the 2021 Form 10-K.

Use of Estimates

The preparation of financial statements in conformity with accounting principles generally accepted in the United States of America requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities as of the date of the financial statements and the reported amounts of revenue and expenses during the reporting period. Significant estimates made by management include the allowance for credit losses, excess and obsolete inventory, fair value of assets acquired and liabilities assumed in a business combination, recoverability and useful lives of property, plant and equipment and identifiable intangible assets, recoverability of goodwill, recoverability of deferred tax assets, liabilities for product warranty, contingencies, including litigation reserves and share-based payments and liabilities for tax uncertainties. Actual results could differ from those estimates.

These estimates and assumptions are based on historical experience and on various other factors which the Company believes to be reasonable under the circumstances. The Company may engage third-party valuation specialists to assist with estimates related to the valuation of financial instruments, assets and stock awards associated with various contractual arrangements. Such estimates often require the selection of appropriate valuation methodologies and significant judgment. Actual results could differ from these estimates under different assumptions or circumstances and such differences could be material.

 

Adoption of Accounting Standards

There have been no recent accounting pronouncements or changes in accounting pronouncements during the three months ended April 2, 2022, as compared to the recent accounting pronouncements described in the Company’s Annual Report on Form 10-K for the fiscal year ended January 1, 2022, that are of significance, or potential significance to the Company.

NOTE 2. Business Combination

Inspectrology, LLC

During the first quarter of 2021, the Company acquired Inspectrology, LLC (“Inspectrology”), a supplier of overlay metrology for controlling lithography and etch processes in the compound semiconductor market for $24,015 in cash and an earnout subject to achievement of certain revenue targets earned for fiscal year 2021 and fiscal year 2022. As of January 1, 2022, $2,287 of the earnout has been achieved and was recorded in operating expenses.

6


 

Table of Contents

There is potential earnout for up to an additional payment of $5,000 based on fiscal 2022 results.  As of April 2, 2022, the Company has accrued $1,873 for the potential earnout.  Certain payments, including the earnout, are subject to the principals remaining with the Company for a period of one to three years.

NOTE 3. Fair Value Measurements

Fair Value of Financial Instruments

The Company has evaluated the estimated fair value of financial instruments using available market information and valuations as provided by third-party sources. The use of different market assumptions and/or estimation methodologies could have a significant effect on the estimated fair value amounts.  The carrying value of cash and cash equivalents, accounts receivable, accounts payable and accrued liabilities approximates fair value because of the short-term maturity of these instruments.

Fair Value Hierarchy

The Company applies a three-level valuation hierarchy for fair value measurements. This hierarchy prioritizes the inputs into three broad levels. Level 1 inputs are quoted prices (unadjusted) in active markets for identical assets or liabilities. Level 2 inputs are quoted prices for similar assets and liabilities in active markets or inputs that are observable for the asset or liability, either directly or indirectly through market corroboration, for substantially the full term of the asset or liability. Level 3 inputs are unobservable inputs based on management’s assumptions used to measure assets and liabilities at fair value. A financial asset’s or liability’s fair value measurement classification within the hierarchy is determined based on the lowest level input that is significant to the fair value measurement.

The following tables provide the assets and liabilities carried at fair value measured on a recurring basis at April 2, 2022 and January 1, 2022:

 

 

 

 

 

 

 

Fair Value Measurements Using

 

 

 

Carrying

Value

 

 

Quoted Prices in

Active Markets for

Identical Assets

(Level 1)

 

 

Significant Other

Observable Inputs

(Level 2)

 

 

Significant

Unobservable Inputs

(Level 3)

 

April 2, 2022

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Assets:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Available-for-sale debt securities:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Municipal notes and bonds

 

$

187,723

 

 

$

 

 

$

187,723

 

 

$

 

Asset-backed securities

 

 

2,188

 

 

 

 

 

 

2,188

 

 

 

 

Certificates of deposit

 

 

25,223

 

 

 

 

 

 

25,223

 

 

 

 

Commercial paper

 

 

79,966

 

 

 

 

 

 

79,966

 

 

 

 

Corporate bonds

 

 

74,348

 

 

 

 

 

 

74,348

 

 

 

 

Total assets

 

$

369,448

 

 

$

 

 

$

369,448

 

 

$

 

Liabilities:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Foreign currency forward contracts

 

$

109

 

 

$

 

 

$

109

 

 

$

 

Contingent consideration - acquisitions

 

 

1,873

 

 

 

 

 

 

 

 

 

1,873

 

Total liabilities

 

$

1,982

 

 

$

 

 

$

109

 

 

$

1,873

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

January 1, 2022

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Assets:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Available-for-sale debt securities:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Municipal notes and bonds

 

$

170,980

 

 

$

 

 

$

170,980

 

 

$

 

Asset-backed securities

 

 

2,009

 

 

 

 

 

 

2,009

 

 

 

 

Certificates of deposit

 

 

33,192

 

 

 

 

 

 

33,192

 

 

 

 

Commercial paper

 

 

73,113

 

 

 

 

 

 

73,113

 

 

 

 

Corporate bonds

 

 

62,447

 

 

 

 

 

 

62,447

 

 

 

 

Total assets

 

$

341,741

 

 

$

 

 

$

341,741

 

 

$

 

Liabilities:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Foreign currency forward contracts

 

$

26

 

 

$

 

 

$

26

 

 

$

 

Total liabilities

 

$

26

 

 

$

 

 

$

26

 

 

$

 

 

7


 

Table of Contents

 

Available-for-sale debt securities classified as Level 2 are valued using observable inputs to quoted market prices, benchmark yields, reported trades, broker/dealer quotes or alternative pricing sources with reasonable levels of price transparency.  The foreign currency forward contracts are primarily measured based on the foreign currency spot and forward rates quoted by the banks or foreign currency dealers.  Investment prices are obtained from third party pricing providers, which model prices utilizing the above observable inputs, for each asset class.  Level 3 investments consisted of contingent consideration related to an acquisition for which the Company uses revenue projections to value this liability.

See Note 4 for additional discussion regarding the fair value of the Company’s marketable securities.

NOTE 4. Marketable Securities

At April 2, 2022 and January 1, 2022, marketable securities are categorized as follows:

 

 

 

Amortized Cost

 

 

Gross Unrealized Holding Gains

 

 

Gross Unrealized Holding Losses

 

 

Fair Value

 

April 2, 2022

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Municipal notes and bonds

 

$

189,742

 

 

$

 

 

$

2,019

 

 

$

187,723

 

Asset-backed securities

 

 

2,201

 

 

 

 

 

 

13

 

 

 

2,188

 

Certificates of deposit

 

 

25,300

 

 

 

1

 

 

 

78

 

 

 

25,223

 

Commercial paper

 

 

80,210

 

 

 

 

 

 

244

 

 

 

79,966

 

Corporate bonds

 

 

75,451

 

 

 

 

 

 

1,103

 

 

 

74,348

 

Total marketable securities

 

$

372,904

 

 

$

1

 

 

$

3,457

 

 

$

369,448

 

January 1, 2022

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Municipal notes and bonds

 

$

171,203

 

 

$

38

 

 

$

261

 

 

$

170,980

 

Asset-backed securities

 

 

2,009

 

 

 

 

 

 

 

 

 

2,009

 

Certificates of deposit

 

 

33,200

 

 

 

2

 

 

 

10

 

 

 

33,192

 

Commercial paper

 

 

73,152

 

 

 

2

 

 

 

41

 

 

 

73,113

 

Corporate bonds

 

 

62,634

 

 

 

29

 

 

 

216

 

 

 

62,447

 

Total marketable securities

 

$

342,198

 

 

$

71

 

 

$

528

 

 

$

341,741

 

 

The amortized cost and estimated fair value of marketable securities classified by the maturity date listed on the security, regardless of the Condensed Consolidated Balance Sheets classification, is as follows at April 2, 2022 and January 1, 2022:

 

 

 

April 2, 2022

 

 

January 1, 2022

 

 

 

Amortized Cost

 

 

Fair Value

 

 

Amortized Cost

 

 

Fair Value

 

Due within one year

 

$

259,879

 

 

$

258,530

 

 

$

219,353

 

 

$

219,211

 

Due after one through five years

 

 

113,025

 

 

 

110,918

 

 

 

122,845

 

 

 

122,530

 

Due after five years

 

 

 

 

 

 

 

 

 

 

 

 

Total marketable securities

 

$

372,904

 

 

$

369,448

 

 

$

342,198

 

 

$

341,741

 

 

8


 

Table of Contents

 

The following table summarizes the estimated fair value and gross unrealized holding losses of marketable securities, aggregated by investment instrument and period of time in an unrealized loss position, at April 2, 2022 and January 1, 2022:

 

 

 

In Unrealized Loss Position For

Less Than 12 Months

 

 

In Unrealized Loss Position For

Greater Than 12 Months

 

 

 

Fair Value

 

 

Gross Unrealized Losses

 

 

Fair Value

 

 

Gross Unrealized Losses

 

April 2, 2022

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Municipal notes and bonds

 

$

187,811

 

 

$

2,002

 

 

$

1,930

 

 

$

17

 

Asset-backed securities

 

 

2,201

 

 

 

13

 

 

 

 

 

 

 

Certificates of deposit

 

 

25,300

 

 

 

78

 

 

 

 

 

 

 

Commercial paper

 

 

80,210

 

 

 

244

 

 

 

 

 

 

 

Corporate bonds

 

 

72,864

 

 

 

1,021

 

 

 

2,587

 

 

 

82

 

Total

 

$

368,386

 

 

$

3,358

 

 

$

4,517

 

 

$

99

 

January 1, 2022

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Municipal notes and bonds

 

$

113,790

 

 

$

262

 

 

$

 

 

$

 

Certificates of deposit

 

 

16,300

 

 

 

10

 

 

 

 

 

 

 

Commercial paper

 

 

58,681

 

 

 

40

 

 

 

 

 

 

 

Corporate bonds

 

 

53,661

 

 

 

150

 

 

 

2,587

 

 

 

66

 

Total

 

$

242,432

 

 

$

462

 

 

$

2,587

 

 

$

66

 

 

See Note 3 for additional discussion regarding the fair value of the Company’s marketable securities.

NOTE 5. Derivative Instruments and Hedging Activities

The Company, when it considers it to be appropriate, enters into forward contracts to hedge the economic exposures arising from foreign currency denominated transactions. At April 2, 2022 and January 1, 2022, these contracts included the future sale of euro, Israeli shekel, Korean won, Singapore dollar, Taiwanese dollar, and Chinese renminbi to purchase U.S. dollars.  Foreign currency forward contracts are not designated as hedges for accounting purposes and therefore, the change in fair value is recorded in “Other expense, net,” in the Condensed Consolidated Statements of Operations.  The Company records its forward contracts at fair value in either prepaid expenses and other current assets or other current liabilities in the Condensed Consolidated Balance Sheets.

The dollar equivalent of the U.S. dollar forward contracts and related fair values as of April 2, 2022 and January 1, 2022 were as follows:

 

 

 

April 2,

2022

 

 

January 1, 2022

 

Notional amount

 

$

31,866

 

 

$

32,293

 

Fair value of liability

 

$

109

 

 

$

26

 

 

9


 

Table of Contents

 

NOTE 6. Purchased Intangible Assets

Intangible Assets

Purchased intangible assets as of April 2, 2022 and January 1, 2022 are as follows:

 

 

 

Gross Carrying Amount

 

 

Accumulated Amortization

 

 

Net

 

April 2, 2022

 

 

 

 

 

 

 

 

 

 

 

 

Finite-lived intangibles:

 

 

 

 

 

 

 

 

 

 

 

 

Developed technology

 

$

378,047

 

 

$

168,326

 

 

$

209,721

 

Customer and distributor relationships

 

 

73,321

 

 

 

26,755

 

 

 

46,566

 

Trademarks and trade names

 

 

14,171

 

 

 

6,946

 

 

 

7,225

 

Total identifiable intangible assets

 

$

465,539

 

 

$

202,027

 

 

$

263,512

 

January 1, 2022

 

 

 

 

 

 

 

 

 

 

 

 

Finite-lived intangibles:

 

 

 

 

 

 

 

 

 

 

 

 

Developed technology

 

$

377,997

 

 

$

155,976

 

 

$

222,021

 

Customer and distributor relationships

 

 

73,321

 

 

 

25,608

 

 

 

47,713

 

Trademarks and trade names

 

 

14,171

 

 

 

6,624

 

 

 

7,547

 

Total identifiable intangible assets

 

$

465,489

 

 

$

188,208

 

 

$

277,281

 

 

Assuming no change in the gross carrying value of identifiable intangible assets and estimated lives, future estimated amortization expenses are:

 

Expected Amortization

 

Fiscal Year:

Expense

 

2022 (remainder)

$

41,459

 

2023

 

54,804

 

2024

 

49,119

 

2025

 

32,569

 

2026

 

31,376

 

2027

 

23,154

 

Thereafter

 

31,031

 

Total

$

263,512

 

 

NOTE 7. Balance Sheet Details

Inventories

Inventories, net are comprised of the following:

 

 

 

April 2, 2022

 

 

January 1, 2022

 

Materials

 

$

171,896

 

 

$

157,343

 

Work-in-process

 

 

68,905

 

 

 

60,415

 

Finished goods

 

 

22,207

 

 

 

25,350

 

Total inventories, net

 

$

263,008

 

 

$

243,108

 

 

10


 

Table of Contents

 

Property, Plant and Equipment

Property, plant and equipment, net is comprised of the following:

 

 

 

April 2, 2022

 

 

January 1, 2022

 

Machinery and equipment

 

$

51,385

 

 

$

50,226

 

Land and building

 

 

48,318

 

 

 

48,297

 

Computer equipment and software

 

 

14,441

 

 

 

13,856

 

Leasehold improvements

 

 

13,725

 

 

 

13,710

 

Furniture and fixtures

 

 

2,532

 

 

 

2,534

 

 

 

 

130,401

 

 

 

128,623

 

Accumulated depreciation and amortization

 

 

(48,712

)

 

 

(46,529

)

Total property, plant and equipment, net

 

$

81,689

 

 

$

82,094

 

 

Other assets

Other assets is comprised of the following:

 

 

 

April 2, 2022

 

 

January 1, 2022

 

Operating lease right-of-use assets

 

$

20,197

 

 

$

17,488

 

Other

 

 

4,287

 

 

 

4,228

 

Total other assets

 

$

24,484

 

 

$

21,716

 

 

Accrued liabilities

Accrued liabilities is comprised of the following:

 

 

 

April 2, 2022

 

 

January 1, 2022

 

Payroll and related expenses

 

$

26,483

 

 

$

32,581

 

Warranty

 

 

9,868

 

 

 

9,093

 

Other

 

 

1,390

 

 

 

1,368

 

Total accrued liabilities

 

$

37,741

 

 

$

43,042

 

Other current liabilities

Other current liabilities is comprised of the following:

 

 

 

April 2, 2022

 

 

January 1, 2022

 

Customer deposits

 

$

10,353

 

 

$

9,459

 

Current operating lease obligations

 

 

4,791

 

 

 

3,968

 

Income tax payable

 

 

16,952

 

 

 

6,315

 

Accrued professional fees

 

 

1,360

 

 

 

912

 

Other

 

 

6,263

 

 

 

7,506

 

Total other current liabilities

 

$

39,719

 

 

$

28,160

 

 

Other non-current liabilities

Other non-current liabilities is comprised of the following:

 

 

 

April 2, 2022

 

 

January 1, 2022

 

Non-current operating lease obligations

 

$

16,144

 

 

$

13,754

 

Unrecognized tax benefits (including interest)

 

 

8,028

 

 

 

7,861

 

Deferred revenue

 

 

2,137

 

 

 

1,693

 

Other

 

 

5,702

 

 

 

5,643

 

Total other non-current liabilities

 

$

32,011

 

 

$

28,951

 

 

 

 

11


 

Table of Contents

 

NOTE 8. Commitments and Contingencies

Factoring

The Company maintains arrangements under which eligible accounts receivable in Japan are sold without recourse to unrelated third-party financial institutions. The Company sold $8,755 of receivables during the three months ended April 2, 2022. These receivables were not included in the Condensed Consolidated Balance Sheets as the criteria for sale treatment had been met. There were no material gains or losses on the sale of such receivables. There were no amounts due from such third-party financial institutions at April 2, 2022.

Intellectual Property Indemnification Obligations

The Company has entered into agreements with customers that include limited intellectual property indemnification obligations that are customary in the industry. These guarantees generally require the Company to compensate the other party for certain damages and costs incurred as a result of third-party intellectual property claims arising from these transactions. The nature of the intellectual property indemnification obligations prevents the Company from making a reasonable estimate of the maximum potential amount it could be required to pay to its customers. Historically, the Company has not made any indemnification payments under such agreements and no amount has been accrued in the accompanying Condensed Consolidated Financial Statements with respect to these indemnification guarantees.

Warranty Reserves

The Company generally provides a warranty on its products for a period of 12 to 14 months against defects in material and workmanship. The Company estimates the costs that may be incurred during the warranty period and records a liability in the amount of such costs at the time revenue is recognized. The Company’s estimate is based primarily on historical experience. The Company periodically assesses the adequacy of its recorded warranty liabilities and adjusts the amounts as necessary. Warranty provisions are generally related to current period sales.  Settlements of warranty reserves are generally associated with sales that occurred during the 12 to 14 months prior to the period-end.

Changes in the Company’s warranty reserves are as follows:

 

 

 

Three Months Ended

 

 

 

April 2,

 

 

March 27,

 

 

 

2022

 

 

2021

 

Balance, beginning of the period

 

$

9,682

 

 

$

6,485

 

Accruals

 

 

3,619

 

 

 

2,652

 

Warranty liability assumed in acquisition

 

 

 

 

 

407

 

Usage

 

 

(2,726

)

 

 

(2,039

)

Balance, end of the period

 

$

10,575

 

 

$

7,505

 

 

Warranty reserves are reported in the Condensed Consolidated Balance Sheets under the captions “Accrued liabilities” and “Other non-current liabilities.”

Legal Matters

From time to time, the Company is subject to legal proceedings and claims in the ordinary course of business. The following reflects an overview of the material developments with regard to the Company’s pending material legal proceedings.

Optical Solutions Inc. v. Nanometrics Incorporated (Case No. 18-cv-00417-BLF): On August 2, 2017, Nanometrics was named as defendant in a complaint filed in New Hampshire Superior Court (the “Complaint”). The Complaint, brought by Optical Solutions, Inc. (“OSI”), alleges claims arising from a purported exclusive purchase contract between OSI and Nanometrics pertaining to certain products. The relief sought is the award of damages in an amount to be proven at trial, attorney’s fees and cost as well as other relief the court deems just and proper. On September 18, 2017, Nanometrics removed the action to the United States District Court for the District of New Hampshire (the “District of New Hampshire”). On September 25, 2017, Nanometrics moved to transfer the Complaint to the United States District Court for the Northern District of California (the “Northern District of California”). On December 20, 2017, Nanometrics filed its complaint against OSI in the California Superior Court for the County of Santa Clara alleging claims arising from OSI’s breach of certain purchase orders. The relief sought is the award of damages in an amount to be proven at trial including pre- and post-judgment interest, punitive damages, restitution for benefits unjustly received by OSI, attorney’s fees and cost as well as other relief the court deems just and proper.  Nanometrics’ complaint was later removed by OSI to the Northern District of California. On May 29, 2018, the District of New Hampshire issued an order granting Nanometrics’ motion to transfer the Complaint to the Northern District of California and denying Nanometrics’ motion to dismiss the Complaint without prejudice. On June 14, 2018, the Complaint was consolidated with Nanometrics’ complaint against OSI. On August 9, 2018, OSI filed an Amended Complaint. On September 19, 2018, Nanometrics filed a motion to dismiss OSI’s Amended Complaint for failure to state a claim. Nanometrics’ motion to dismiss was heard on February 28, 2019. On March 5, 2019, the Northern District of California granted Nanometrics’ motion to dismiss with leave to amend. OSI filed a Second Amended Complaint on March 29, 2019. Nanometrics filed a motion to

12


 

Table of Contents

dismiss OSI’s Second Amended Complaint on May 31, 2019. In October 2019, Nanometrics was renamed Onto Innovation Inc. as a result of the Merger. Thereafter, the Company’s second motion to dismiss was heard on November 14, 2019. On November 26, 2019, the Northern District of California granted the Company’s motion to dismiss with leave to amend. OSI filed a Third Amended Complaint on January 21, 2020. On March 2, 2020, the Company filed a motion to dismiss OSI’s Third Amended Complaint and a hearing on the motion was held on June 11, 2020. On June 23, 2020, the Northern District of California granted the Company’s motion to dismiss with prejudice with regard to two claims asserted by OSI and dismissed two other claims asserted by OSI with leave to amend. Thereafter, on July 7, 2020, OSI filed a Fourth Amended Complaint. On August 14, 2020, the Company filed a motion to dismiss with regard to one of the two remaining claims. On December 1, 2020, the Northern District of California denied this final motion to dismiss and as a result the Company filed its Answer in this matter on December 22, 2020. This matter is currently in discovery. The Northern District of California granted a joint stipulation that the discovery cutoff is November 1, 2022 and the trial date is set for December 4, 2023. At this time, the loss contingency in this matter is remote and the Company does not anticipate the outcome of the matter to have a material impact on its financial position, results of operations, or cash flows.

Line of Credit

The Company has a credit agreement with a bank that provides for a line of credit which is secured by the marketable securities the Company has with the bank.  The Company is permitted to borrow up to 70% of the value of eligible securities held at the time the line of credit is accessed.  The available line of credit as of April 2, 2022 was approximately $128.7 million with an available interest rate of 2.0%.  The credit agreement is available to the Company until such time that either party terminates the arrangement at their discretion.  The Company has not utilized the line of credit to date.

NOTE 9. Revenue

The following table represents a disaggregation of revenue by timing of revenue:

 

 

Three Months Ended

 

 

April 2,

 

 

March 27,

 

 

2022

 

 

2021

 

Point-in-time

$

229,970

 

 

$

161,161

 

Over-time

 

11,380

 

 

 

8,118

 

Total revenue

$

241,350

 

 

$

169,279

 

See Note 15 for additional discussion of the Company’s disaggregated revenue in detail.

 

Contract Liabilities

The Company records contract liabilities when the customer has been billed in advance of the Company completing its performance obligations primarily related to service contracts and installation.  For contracts that have a duration of one year or less, these amounts are recorded as current deferred revenue in the Condensed Consolidated Balance Sheets.  As of April 2, 2022 and January 1, 2022, the Company carried a long-term deferred revenue balance of $2,137 and $1,693, respectively, in other non-current liabilities on the Condensed Consolidated Balance Sheets.  

Changes in deferred revenue were as follows:

 

 

Three Months Ended

 

 

April 2,

 

 

March 27,

 

 

2022

 

 

2021

 

Balance, beginning of the period

$

31,672

 

 

$

15,626

 

Deferred revenue assumed in acquisition

 

 

 

 

385

 

Deferral of revenue

 

23,500

 

 

 

19,232

 

Recognition of deferred revenue

 

(16,573

)

 

 

(12,814

)

Balance, end of the period

$

38,599

 

 

$

22,429

 

13


 

Table of Contents

 

 

NOTE 10. Share-Based Compensation

Restricted Stock Unit Activity

A summary of the Company’s restricted stock unit activity with respect to the three months ended April 2, 2022 is as follows:

 

 

 

Number of Shares

 

 

Weighted Average

Grant Date Fair Value

 

Nonvested at January 1, 2022

 

 

765

 

 

$

48.25

 

Granted

 

 

120

 

 

$

89.15

 

Vested

 

 

(175

)

 

$

49.56

 

Forfeited

 

 

(30

)

 

$

51.59

 

Nonvested at September 25, 2021

 

 

680

 

 

$

54.99

 

 

Of the 680 nonvested shares outstanding at April 2, 2022, 581 are service-based RSUs and 99 are market-based PRSUs. The fair value of the Company’s service-based RSUs was calculated based on the fair market value of the Company’s stock at the date of grant. The fair value of the Company’s market-based PRSUs granted during fiscal years 2022 and 2021 was calculated using a Monte Carlo simulation model at the date of the grant, resulting in a weighted average grant-date fair value per share of $85.49 and $80.04, respectively.

As of April 2, 2022 and January 1 2022, there was $25,196 and $21,019 of total unrecognized compensation cost related to restricted stock units granted under the Company’s stock plans, respectively.  That cost is expected to be recognized over a weighted average period of 1.4 years and 1.5 years for April 2, 2022 and January 1, 2022, respectively.

NOTE 11. Other Expense, Net

Other expense, net, is comprised of the following:

 

 

 

Three Months Ended

 

 

 

April 2,

 

 

March 27,

 

 

 

2022

 

 

2021

 

Foreign currency exchange losses, net

 

$

(214

)

 

$

(1,271

)

Other

 

 

10

 

 

 

27

 

Total other expense, net

 

$

(204

)

 

$

(1,244

)

 

NOTE 12. Income Taxes

The following table provides details of income taxes:

 

 

 

Three Months Ended

 

 

 

April 2,

 

 

March 27,

 

 

 

2022

 

 

2021

 

Income before income taxes

 

$

58,917

 

 

$

26,602

 

Provision for income taxes

 

$

5,587

 

 

$

2,489

 

Effective tax rate

 

 

9

%

 

 

9

%

 

The income tax provision for the three months ended April 2, 2022 was computed based on the Company’s annual forecast of profit by jurisdiction and forecasted effective tax rate for the year.  The income tax provision in the 2022 period reflected the impact of a change in U.S. tax law effective January 1, 2022, which requires the capitalization and amortization of research and development expenditures incurred after December 31, 2021.  The increase in the Company’s income tax provision for the three months ended April 2, 2022 as compared to the three months ended March 27, 2021 is primarily due to an increase in quarterly earnings, offset by an increase in the Foreign Derived Intangible Income (“FDII”) deduction, and an increase in the excess tax benefit associated with equity compensation.  The Company’s recorded effective tax rate is less than the U.S. statutory rate primarily due to projected FDII deductions, federal research and development tax credits, and excess tax benefits associated with equity compensation.

14


 

Table of Contents

The Company currently has a partial valuation allowance recorded against certain foreign and state net operating loss and credit carryforwards where the realizability of such deferred tax assets is substantially in doubt.  Each quarter, the Company assesses the likelihood that it will be able to recover its deferred tax assets. The Company considers available evidence, both positive and negative, including forecasted earnings in assessing its need for a valuation allowance.  As a result of the Company’s analysis, it concluded that it is more likely than not that a portion of its deferred tax assets will not be realized. Therefore, the Company continues to provide a valuation allowance against certain deferred tax assets.  The Company continues to monitor available evidence and may reverse some or all of its remaining valuation allowance in future periods, if appropriate.  The Company has a recorded valuation allowance against a certain portion of its deferred tax assets of $10,948 for both April 2, 2022 and January 1, 2022.

NOTE 13. Earnings Per Share

Basic earnings per share is calculated using the weighted average number of shares of common stock outstanding during the period. Restricted stock units, employee stock purchase grants and stock options are included in the calculation of diluted earnings per share, except when their effect would be anti-dilutive.

The Company’s basic and diluted earnings per share amounts are as follows:

 

 

 

 

Three Months Ended

 

 

 

April 2,

 

 

March 27,

 

 

 

2022

 

 

2021

 

Numerator:

 

 

 

 

 

 

 

 

Net income

 

$

53,330

 

 

$

24,113

 

Denominator:

 

 

 

 

 

 

 

 

Basic earnings per share - weighted average shares

   outstanding

 

 

49,437

 

 

 

49,000

 

Effect of potential dilutive securities:

 

 

 

 

 

 

 

 

Employee stock options, employee stock purchase grants and

   restricted stock units - dilutive shares

 

 

478

 

 

 

572

 

Diluted earnings per share - weighted average shares

   outstanding

 

 

49,915

 

 

 

49,572

 

Earnings per share:

 

 

 

 

 

 

 

 

Basic

 

$

1.08

 

 

$

0.49

 

Diluted

 

$

1.07

 

 

$

0.49

 

 

NOTE 14. Accumulated Other Comprehensive Income (Loss)

The components of accumulated other comprehensive loss, net of tax, at April 2, 2022, as well as the activity for the three months ended April 2, 2022, were as follows:

 

 

 

Foreign currency

translation

adjustments

 

 

Net unrealized losses on

available-for-sale marketable

securities

 

 

Accumulated other

comprehensive income (loss)

 

Balance at January 1, 2022

 

$

1,764

 

 

$

(448

)

 

$

1,316

 

Net current period other comprehensive loss

 

 

(3,612

)

 

 

(3,001

)

 

 

(6,613

)

Reclassifications

 

 

 

 

 

 

 

 

 

Balance at April 2, 2022

 

$

(1,848

)

 

$

(3,449

)

 

$

(5,297

)

 

NOTE 15. Segment Reporting and Geographic Information

The Company is engaged in the design, development, manufacture and support of high-performance control metrology, defect inspection, lithography and data analysis systems used by microelectronics device manufacturers. The Company and its subsidiaries currently operate in a single operating segment: the design, development, manufacture and support of high-performance process control defect inspection and metrology, lithography and process control software systems used by microelectronics device manufacturers. Therefore, the Company has one reportable segment. The Company’s chief operating decision maker is the Chief Executive Officer (the “CEO”). The CEO allocates resources and assesses performance of the business and other activities at the reportable segment level.

15


 

Table of Contents

The following table lists the different sources of revenue:

 

 

 

Three Months Ended

 

 

 

April 2,

 

 

March 27,

 

 

 

2022

 

 

2021

 

Systems and software

 

$

209,383

 

 

 

87

%

 

$

141,509

 

 

 

84

%

Parts

 

 

19,857

 

 

 

8

%

 

 

17,418

 

 

 

10

%

Services

 

 

12,110

 

 

 

5

%

 

 

10,352

 

 

 

6

%

Total revenue

 

$

241,350

 

 

 

100

%

 

$

169,279

 

 

 

100

%

 

The Company’s significant operations outside the United States include sales, service and application offices in Asia and Europe.  For geographical revenue reporting, revenue is attributed to the geographic location to which the product is shipped.  Revenue by geographic region is as follows:

 

 

 

Three Months Ended

 

 

 

April 2,

 

 

March 27,

 

 

 

2022

 

 

2021

 

Revenue from third parties:

 

 

 

 

 

 

 

 

China

 

$

63,394

 

 

$

25,779

 

South Korea

 

 

61,135

 

 

 

50,530

 

Taiwan

 

 

53,392

 

 

 

36,293

 

United States

 

 

26,801

 

 

 

25,480

 

Europe

 

 

18,428

 

 

 

17,385

 

Southeast Asia

 

 

9,225

 

 

 

5,947

 

Japan

 

 

8,975

 

 

 

7,865

 

Total revenue

 

$

241,350

 

 

$

169,279

 

 

The following customers accounted for 10% or more of total revenue for the indicated periods:

 

 

 

Three Months Ended

 

 

 

April 2,

 

 

March 27,

 

 

 

2022

 

 

2021

 

SK Hynix Inc.

 

 

19

%

 

 

12

%

Taiwan Semiconductor Manufacturing Co. Ltd.

 

 

16

%

 

 

13

%

Samsung Semiconductor

 

 

10

%

 

 

25

%

 

NOTE 16. Share Repurchase Authorization

In November 2020, the Onto Innovation Board of Directors approved a share repurchase authorization, which allows the Company to repurchase up to $100 million worth of shares of its common stock.  Repurchases may be made through both public market and private transactions from time to time with shares purchased being subsequently retired.  No shares were purchased in the three months ended April 2, 2022.  At April 2, 2022, there was $100 million available for future share repurchases under this share repurchase authorization.  

 


16


 

Table of Contents

 

Item 2. Management’s Discussion and Analysis of Financial Condition and Results of Operations 

Forward-Looking Statements

Certain statements in this Quarterly Report on Form 10-Q (this “Form 10-Q”), or incorporated by reference in this Form 10-Q, of Onto Innovation Inc. (referred to in this Form 10-Q, together with its consolidated subsidiaries, unless otherwise specified or suggested by the context, as the “Company,” “Onto Innovation,” “we,” “our” or “us”) may be considered “forward-looking statements” or may be based on “forward-looking statements,” including, but not limited to, those concerning:

 

anticipated effects of, and future actions to be taken in response to, the COVID-19 pandemic;  

 

our business momentum and future growth;

 

technology development, product introduction and acceptance of our products and services;

 

our manufacturing practices and ability to deliver both products and services consistent with our customers’ demands and expectations and to strengthen our market position, including our ability to source components, materials, and equipment due to supply chain delays or shortages;

 

our expectations of the semiconductor market outlook;

 

future revenue, gross profits, research and development and engineering expenses, selling, general and administrative expenses, and cash requirements;

 

our dependence on certain significant customers and anticipated trends and developments in and management plans for our business and the markets in which we operate; and

 

our ability to be successful in managing our cost structure and cash expenditures and results of litigation.

Statements contained or incorporated by reference in this Form 10-Q that are not purely historical are forward-looking statements and are subject to safe harbors under Section 27A of the Securities Act of 1933, as amended, Section 21E of the Securities Exchange Act of 1934, as amended (the “Exchange Act”), and the Private Securities Litigation Reform Act of 1995. Forward-looking statements may be identified by words such as, but not limited to, “anticipate,” “believe,” “continue,” “estimate,” “expect,” “intend,” “plan,” “should,” “may,” “could,” “will,” “would,” “forecast,” “project” and words or phrases of similar meaning, as they relate to our management or us.

Forward-looking statements contained herein reflect our current expectations, assumptions and projections with respect to future events and are subject to certain risks, uncertainties and assumptions, such as those identified in Part II, Item 1A. “Risk Factors” and elsewhere in this Form 10-Q. Actual results may differ materially and adversely from those included in such forward-looking statements. Forward-looking statements reflect our position as of the date of this Form 10-Q and we undertake no obligation to update any forward-looking statements, whether as a result of new information, future events or otherwise, except as required by law.

Critical Accounting Policies and Estimates

The preparation of condensed consolidated financial statements and related disclosures in conformity with accounting principles generally accepted in the United States (“U.S. GAAP”) requires management to make judgments, assumptions and estimates that affect the amounts reported.  Certain of these significant accounting policies are considered to be critical accounting policies, as defined below.

A critical accounting policy is defined as one that is both material to the presentation of our condensed consolidated financial statements and requires management to make difficult, subjective or complex judgments that could have a material effect on our financial condition or results of operations.  Specifically, these policies have the following attributes: (1) we are required to make judgments and assumptions about matters that are highly uncertain at the time of the estimate; and (2) different estimates we could reasonably have used, or changes in the estimate that are reasonably likely to occur, could have a material effect on our financial position and results of operations.

Estimates and assumptions about future events and their effects cannot be determined with certainty.  We base our estimates on historical experience and on various other assumptions believed to be applicable and reasonable under the circumstances.  These estimates may change as new events occur, as additional information is obtained and as our operating environment changes.  In addition, management is periodically faced with uncertainties, the outcomes of which are not within our control and will not be known for prolonged periods of time. Certain of these uncertainties are discussed in our Annual Report on Form 10-K for the fiscal year ended January 1, 2022 (the “2021 Form 10-K”) filed with the Securities and Exchange Commission on February 25, 2022 in the Items entitled “Risk Factors” and “Management’s Discussion and Analysis of Financial Condition and Results of Operations.”  Based on a critical assessment of our accounting policies and the underlying judgments and uncertainties affecting the application of those policies, we believe that our condensed consolidated financial statements are fairly stated in accordance with U.S. GAAP and provide a fair presentation of our financial position and results

17


 

Table of Contents

of operations. There have been no material changes in our critical accounting policies and estimates from the information presented in Part II, Item 7. “Management’s Discussion and Analysis of Financial Condition and Results of Operations,” in the 2021 Form 10-K.

For more information, please see our critical accounting policies and estimates as previously disclosed in our 2021 Form 10-K and recent accounting pronouncements discussed in Note 1 to the Condensed Consolidated Financial Statements.

Executive Summary

We are a worldwide leader in the design, development, manufacture and support of process control tools that perform macro-defect inspection and metrology, lithography systems, and process control analytical software used by semiconductor and advanced packaging device manufacturers. We deliver comprehensive solutions throughout the semiconductor fabrication process with our families of proprietary products that provide critical yield-enhancing information, enabling microelectronic device manufacturers to drive down costs and time to market of their devices. We provide process and yield management solutions used in both wafer processing facilities, often referred to as “front-end” manufacturing, and in device packaging and test facilities, commonly referred to as “back-end” manufacturing. Our advanced process control software portfolio includes powerful solutions for standalone tools, groups of tools, or factory-wide suites to enhance productivity and achieve significant cost savings.

Our principal market is semiconductor capital equipment.  Semiconductors packaged as integrated circuits, or “chips,” are used in consumer electronics, server and enterprise systems, mobile computing (including smart phones and tablets), data storage devices, and embedded automotive and control systems.  Our core focus is the measurement and control of the structure, composition, and geometry of semiconductor devices as they are fabricated on silicon wafers to improve device performance and manufacturing yields.

Our products and services are used by our customers who manufacture many types of integrated circuits for a multitude of applications, each having unique manufacturing challenges. This includes integrated circuits to enable information processing and management (logic integrated circuits), memory storage (NAND, 3D-NAND, NOR, and DRAM), analog devices (e.g., Wi-Fi and 5G radio integrated circuits, power devices), MEMS sensor devices (accelerometers, pressure sensors, microphones), image sensors, and other end markets including components for hard disk drives, LEDs, and power management.

The semiconductor and electronics industries have also been characterized by constant technological innovation. We believe that, over the long term, our customers will continue to invest in advanced technologies and new materials to enable smaller design rules and higher density applications that fuel demand for process control equipment.

The following table summarizes certain key financial information for the periods indicated below (in thousands, except per share and percent data):

 

Three Months Ended

 

 

April 2,

 

 

January 1,

 

 

March 27,

 

 

2022

 

 

2022

 

 

2021

 

Revenue

$

241,350

 

 

$

225,644

 

 

$

169,279

 

Gross profit

$

131,023

 

 

$

123,803

 

 

$

90,469

 

Gross profit as a percent of revenue

 

54

%

 

 

55

%

 

 

53

%

Total operating expenses

$

72,279

 

 

$

73,948

 

 

$

62,984

 

Net income

$

53,330

 

 

$

46,737

 

 

$

24,113

 

Diluted earnings per share

$

1.07

 

 

$

0.94

 

 

$

0.49

 

 

 

 

 

 

 

 

 

 

 

 

 

 

In the fiscal quarter ended April 2, 2022 (the “April 2022 quarter”), revenue increased 7.0% compared to the fiscal quarter ended January 1, 2022 (the “January 2022 quarter”), primarily due to an increase in sales to memory customers for advanced nodes applications, partially offset by a decline in sales to specialty device advanced packaging customers.

 

 

Gross margin as a percentage of revenue in the April 2022 quarter compared to the January 2022 quarter decreased primarily due to higher freight and logistics costs in the April 2022 quarter.

 

Our cash, cash equivalents and marketable securities balance increased to $541.9 million at the end of the April 2022 quarter compared to $511.3 million at the end of the January 2022 quarter. This increase was primarily the result of $43.2 million of cash generated from operating activities. This source of cash was partially offset by net cash of $2.5 million used for capital expenditures. Employee headcount as of April 2, 2022 was approximately 1,446.

18


 

Table of Contents

Key Events

Impact of the COVID-19 Pandemic on Our Business. As of May 3, 2022, our operations have been impacted by our pandemic response, as described below, given the global nature of our workforce and our operations.  The ultimate extent to which COVID-19 will impact our business depends on future developments, which are highly uncertain and very difficult to predict, including the effectiveness and utilization of vaccines for COVID-19 and its variants, new information that may emerge concerning the severity of COVID-19 and its variants, and actions to contain or limit their spread.

We have prioritized the health and safety of our employees and customers in our pandemic response. As governmental authorities implement restrictions on commercial operations, we have continued to ensure compliance with these directives while also maintaining business continuity for our essential operations. We have a global workforce.  Although our manufacturing facilities are in the United States, we maintain offices and have employees in the United States, South Korea, Japan, Taiwan, China, Singapore and Europe. Our operations at these offices are subject to various governmental directives and, as a result thereof, we have instituted a work-from-home policy for these employees to the extent practical.  Where our essential employees are required to continue to report to work to perform their responsibilities, we have implemented staggered shifts or otherwise adjusted work schedules to maximize our operating capacity while adhering to applicable restrictions, including recommended distancing between persons.  We have also provided our essential employees with appropriate protective equipment and have enhanced and increased cleanings at our facilities. At this time, we have not experienced any reduction in productivity, though we have incurred certain costs related to the implementation of these policies and practices.  In addition, we have enhanced our email screening and cyber monitoring of our devices to further support our work-from-home policy.  As certain countries have relaxed restrictions over the past few months, we have restarted certain activities in accordance with local guidelines.  We may take further actions that we determine to be in the best interests of our employees or as may be required by federal, state, or local authorities.

To date, the COVID-19 pandemic has disrupted the way that we conduct business but has not had a material adverse impact on our operations.  We have not experienced significant delays in customer deliveries, but we are impacted by the global shortage in electronic components and our supply chain is strained in some cases as the availability of materials, logistics and freight options are challenging in many jurisdictions.  Demand for our products was consistent with or exceeded our expectations for the first quarter of fiscal 2022.  However, further disruptions to our supply chain in connection with the sourcing of materials, equipment and engineering support, and services from geographic areas that have been impacted by COVID-19 may pose risks to our business, results of operations and financial condition.  In this time of uncertainty as a result of the COVID-19 pandemic, we are continuing to serve our customers while taking appropriate precautionary measures to provide a safe work environment for our employees and customers.

The full extent of the pandemic’s effect on our operational and financial performance will depend in large part on future developments, which cannot be predicted with confidence at this time. Future developments include the duration, scope and severity of the pandemic, the severity of newly identified strains of COVID-19, the actions taken to contain or mitigate its impact, such as the extent of restrictions on gatherings and travel, the impact on governmental programs and budgets, the development, administration, efficacy and public utilization of treatments and vaccines, and the resumption of widespread economic activity, and the pace of recovery, including with respect to supply chain shortage. Trade tensions between the United States and China may escalate as a result of COVID-19 or otherwise and could result in the imposition of additional tariffs, trade restrictions or policy changes, any of which could increase costs of our product components and pricing of, and consumer demand for, our products, which could have a negative effect on our results of operations.

Although the inherent uncertainty of the ongoing crisis makes it difficult to predict with any confidence the likely impact on our future operations, the COVID-19 pandemic could have a material adverse impact on our consolidated business, results of operations and financial condition.

For a discussion of certain risks related to the international nature of our business and our operations and the COVID-19 pandemic, see Part II, Item 1A – Risk Factors of this Form 10-Q, Part I, Item 1A – Risk Factors of our 2021 Form 10-K.

Results of Operations for the Three Months Ended April 2, 2022 and March 27, 2021

Revenue.  Our revenue is primarily derived from the sale of our systems, services, spare parts and software licensing.  Our revenue of $241.3 million increased 42.6% for the three months ended April 2, 2022 as compared to the same period in 2021, in which revenue totaled $169.3 million.  

19


 

Table of Contents

The following table lists, for the periods indicated, the different sources of our revenue in dollars (thousands) and as percentages of our total revenue:

 

 

 

Three Months Ended

 

 

 

April 2,

 

 

March 27,

 

 

 

2022

 

 

2021

 

Systems and software

 

$

209,383

 

 

 

87

%

 

$

141,509

 

 

 

84

%

Parts

 

 

19,857

 

 

 

8

%

 

 

17,418

 

 

 

10

%

Services

 

 

12,110

 

 

 

5

%

 

 

10,352

 

 

 

6

%

Total revenue

 

$

241,350

 

 

 

100

%

 

$

169,279

 

 

 

100

%

 

Total systems and software revenue increased $67.9 million for the three months ended April 2, 2022 as compared to the three months ended March 27, 2021 primarily due to an increase of units shipped in our metrology and inspection product lines. The year-over-year increase in parts and services revenue in absolute dollars from the three months ended April 2, 2022 to the three months ended March 27, 2021 was primarily due to servicing a larger installed base.  Parts and services revenue is generated from part sales, maintenance service contracts, and system upgrades, as well as time and material billable service calls.

Gross Profit.  Our gross profit has been and will likely continue to be affected by a variety of factors, manufacturing efficiencies, provision for excess and obsolete inventory, pricing by competitors or suppliers, new product introductions, production volume, customization and reconfiguration of systems, international and domestic sales mix, system and software product mix and parts and service margins.  Our gross profit was $131.0 million and $90.5 million for the three months ended April 2, 2022 and March 27, 2021, respectively.  Our gross profit represented 54.3% and 53.4% of our revenue for the three months ended April 2, 2022 and March 27, 2021, respectively.  The increase in gross profit as a percentage of revenue for the three months ended April 2, 2022, as compared to the three months ended March 27, 2021, is primarily due to an increase in sales volume and favorable changes in product mix, partially offset by higher freight and logistics costs, and higher personnel cost due to an increase in headcount to provide manufacturing capacity requirements.

Operating Expenses.  

Our operating expenses consist of:

 

Research and Development. We believe that it is critical to continue to make substantial investments in research and development to ensure the availability of innovative technology that meets the current and projected requirements of our customers’ most advanced designs. We have maintained and intend to continue our commitment to investing in research and development in order to continue to offer new products and technologies.  Accordingly, we devote a significant portion of our technical, management and financial resources to research and development programs. Research and development expenditures consist primarily of salaries and related expenses of employees engaged in research, design and development activities. They also include consulting fees, the cost of related supplies and legal costs to defend our patents. Our research and development expenses were $26.3 million and $22.0 million for the three months ended April 2, 2022 and March 27, 2021, respectively.  The year-over-year dollar increase for the three-month period ended April 2, 2022 as compared to the three-month period ended March 27, 2021 was primarily due to increased compensation costs from additional headcount, as well as annual merit and promotion increases, and increased consulting, outside service and material expenses for new product initiatives.  

 

Sales and Marketing. Sales and marketing expenses are primarily comprised of salaries, commissions and related costs for sales and marketing personnel, as well as other non-personnel related expenses.  Our sales and marketing expenses were $15.6 million and $13.1 million for the three months ended April 2, 2022 and March 27, 2021, respectively.  The year-over-year increase in sales and marketing expenses for the three-month period ended April 2, 2022 as compared to the three-month period ended March 27, 2021 was primarily due to increased compensation costs and increased travel related expenses as pandemic travel restrictions were lifted.

 

General and Administrative. General and administrative expenses are primarily comprised of salaries and related costs for administrative personnel, as well as other non-personnel related expenses. Our general and administrative expenses were $16.5 million and $15.6 million for the three months ended April 2, 2022 and March 27, 2021, respectively.  The year-over-year increase in general and administrative expenses for the three-month period ended April 2, 2022 as compared to the three-month period ended March 27, 2021 was primarily due to increased compensation costs and increased litigation expenses.

 

Amortization of Identifiable Intangible Assets.  Amortization of identifiable intangible assets was $13.8 million and $12.4 million for the three months ended April 2, 2022 and March 27, 2021, respectively.  The year-over-year increase in amortization expense for the three-month period ended April 2, 2022 as compared to the three-month

20


 

Table of Contents

 

period ended March 27, 2021 was primarily due to in-process research and development becoming classified as a finite-lived intangible asset and amortization commencing in the second half of 2021.

Interest income, net.  Net interest income was $0.4 million for both the three months ended April 2, 2022 and March 27, 2021.

Other expense, net.  Net other expense was $0.2 million and $1.2 million for the three months ended April 2, 2022 and March 27, 2021, respectively.  The decrease in other expense, net for the three months ended April 2, 2022 as compared to the three months ended March 27, 2021 was primarily due to lower foreign exchange losses during the 2022 period.

Income Taxes. We recorded an income tax provision of $5.6 million and $2.5 million for the three months ended April 2, 2022 and March 27, 2021, respectively.  Our effective tax rate of 9% differs from the statutory rate of 21% for the three months ended April 2, 2022 primarily due to (i) research and development tax credits, (ii) the deduction related to foreign derived intangible income (“FDII”), and (iii) excess tax benefits associated with equity compensation.  Our effective tax rate of 9% differs from the statutory rate of 21% for the three months ended March 27, 2021, primarily due to (i) foreign and research and development tax credits, (ii) the deduction related to FDII, and (iii) excess tax benefits associated with equity compensation.

Our future effective income tax rate depends on various factors, such as possible changes in tax legislation, the geographic composition of our pre-tax income, the amount of our pre-tax income as business activities fluctuate, non-deductible expenses incurred in connection with business combinations, and research and development tax credits as a percentage of aggregate pre-tax income.

We currently have a partial valuation allowance recorded for certain foreign and state loss and credit carryforwards where the realizability of such deferred tax assets is substantially in doubt.  Each quarter we assess the likelihood that we will be able to recover our deferred tax assets primarily relating to state research and development credits.  We consider available evidence, both positive and negative, including historical levels of income, expectations and risks associated with estimates of future taxable income and ongoing prudent and feasible tax planning strategies in assessing the need for a valuation allowance.  As a result of our analysis, we concluded that it is more likely than not that a portion of our net deferred tax assets will not be realized.  Therefore, we continue to provide a valuation allowance against certain net deferred tax assets.  We continue to monitor available evidence and may reverse some or all of the valuation allowance in future periods, if appropriate.

Beginning in 2022, the U.S. Tax Cuts and Jobs Act of 2017 (“TCJA”) eliminated the existing option to deduct research and development expenditures and requires taxpayers to amortize them over five years pursuant to IRC Section 174. While the capitalization requirement has a negative impact on our cash flows, there are offsetting benefits from the enactment of this provision that we have included in our estimated annual effective tax rate.  Although Congress is considering legislation that would defer the amortization requirement to later years, we have no assurance that the provision will be repealed or otherwise modified. If it is delayed, these effective tax rate benefits will not be realized in the current year.  Changes in our tax provisions or an increase in our tax liabilities, whether due to changes in applicable laws and regulations, the interpretation or application thereof, or a final determination of tax audits or litigation or agreements, could have a material adverse effect on our financial position, results of operations and/or cash flows.

Liquidity and Capital Resources

At April 2, 2022, we had $541.9 million of cash, cash equivalents and marketable securities and $847.6 million in working capital.  At January 1, 2022, we had $511.3 million of cash, cash equivalents and marketable securities and $793.6 million in working capital.

Net cash and cash equivalents provided by operating activities for the three months ended April 2, 2022 and March 27, 2021 were $45.5 million and $51.0 million, respectively. 

 

The net cash and cash equivalents provided by operating activities during the three months ended April 2, 2022 resulted primarily from net income, adjusted to exclude the effect of non-cash operating charges of $70.8 million, partially offset by a decrease in cash provided from operating assets and liabilities of $25.4 million, primarily due to increases in inventories and accounts receivable.  

 

The net cash and cash equivalents provided by operating activities during the three months ended March 27, 2021 resulted primarily from net income, adjusted to exclude the effect of non-cash operating charges, of $49.7 million and an increase in cash provided from operating assets and liabilities of $1.3 million.

Net cash and cash equivalents used in investing activities for the three months ended April 2, 2022 and March 27, 2021 were $33.3 million and $60.3 million, respectively.  

21


 

Table of Contents

 

During the three months ended April 2, 2022, net cash and cash equivalents used in investing activities included purchases of marketable securities of $97.5 million and capital expenditures of $2.5 million, partially offset by proceeds from sales of marketable securities of $66.7 million.  

 

During the three months ended March 27, 2021, net cash used in investing activities included purchases of marketable securities of $83.7 million, purchase of a business of $26.8 million and capital expenditures of $3.9 million, partially offset by proceeds from sales of marketable securities of $54.0 million.

Net cash and cash equivalents used in financing activities for the three months ended April 2, 2022 were $7.6 million. Financing activities provided net cash and cash equivalents during the three months ended March 27, 2021 of $0.6 million.  

 

During the three months ended April 2, 2022, financing activities used cash to primarily pay taxes related to shares withheld for share-based compensation plans of $5.3 million and pay contingent consideration for acquired business of $2.3 million, partially offset by proceeds from sales of shares through share-based compensation plans of $0.6 million.

 

During the three months ended March 27, 2021, financing activities provided cash from proceeds from sales of shares through share-based compensation plans of $3.1 million, partially offset by tax payments related to shares withheld for share-based compensation plans of $2.5 million.

From time to time, we evaluate whether to acquire new or complementary businesses, products or technologies. We may fund all of or a portion of the price of these investments or acquisitions in cash, stock, or a combination of cash and stock. In the first quarter of 2021, the Company acquired Inspectrology, LLC for $24.0 million in cash and an earnout subject to the achievement of certain revenue targets earned for fiscal 2021 through 2022.  The earnout achieved for fiscal 2021 was $2.3 million and was paid in the first half of fiscal 2022.  There is potential earnout for up to an additional payment of $5.0 million depending on fiscal 2022 results.  As of April 2, 2022, we have accrued $1.9 million for the potential earnout.

In November 2020, the Onto Innovation Board of Directors approved a share repurchase authorization, which allows the Company to repurchase up to $100 million worth of shares of its common stock.  Repurchases may be made through both public market and private transactions from time to time with shares purchased being subsequently retired. At April 2, 2022, there was $100 million available for future share repurchases.

We have a credit agreement with a bank that provides for a line of credit that is secured by the marketable securities we have with the bank.  We are permitted to borrow up to 70% of the value of eligible securities held at the time the line of credit is accessed.  As of April 2, 2022, the available line of credit was approximately $128.7 million with an available interest rate of 2.0%.  The credit agreement is available to us until such time that either party terminates the arrangement at its discretion.   To date, we have not utilized the line of credit.

Our future capital requirements will depend on many factors, including the timing and amount of our revenue and our investment decisions, which will affect our ability to generate additional cash. In addition, although the ultimate impact of the COVID-19 pandemic and its effects on economic conditions and the global supply chain on our future results remains uncertain, we believe our business model and our current cash reserves leave us well-positioned to manage our business through this crisis as it continues to unfold. We expect that our existing cash, cash equivalents, marketable securities and availability under our line of credit will be sufficient to meet our anticipated cash requirements for working capital, capital expenditures and other cash needs for the next 12 months following the filing of this Form 10-Q. Thereafter, if cash generated from operations and financing activities is insufficient to satisfy our working capital requirements, we may seek additional funding through bank borrowings, sales of securities or other means. Market conditions due to the COVID-19 pandemic or other factors may have an impact on our ability to access such additional funding. Our borrowing capacity under our existing line of credit is tied to the value of eligible securities held at the time of borrowing, which may be negatively impacted by market conditions due to COVID-19 and government responses thereto or other factors. In addition, a reduction in or volatility with respect to our stock price or a general market downturn could materially impact our ability to sell securities on favorable terms or at all. There can be no assurance that we will be able to raise any such capital on terms acceptable to us or at all.

22


 

Table of Contents

Item 3. Quantitative and Qualitative Disclosures About Market Risk

There have been no material changes in market risk from the information presented in Part II, Item 7A. “Quantitative and Qualitative Disclosures About Market Risk,” in the 2021 Form 10-K.

Item 4. Controls and Procedures

Evaluation of Disclosure Controls and Procedures

We maintain disclosure controls and procedures that are designed to ensure that information we are required to disclose in reports that we file or submit under the Exchange Act is recorded, processed, summarized and reported within the time period specified in SEC rules and forms. These controls and procedures are also designed to ensure that such information is accumulated and communicated to our management, including our principal executive officer and principal financial officer, as appropriate, to allow timely decisions regarding required disclosure. In designing and evaluating disclosure controls and procedures, we have recognized that any controls and procedures, no matter how well designed and operated, can provide only reasonable assurance of achieving the desired control objectives. Management is required to apply judgment in evaluating its controls and procedures.

We performed an evaluation under the supervision and with the participation of our management, including our principal executive officer and principal financial officer, to assess the effectiveness of the design and operation of our disclosure controls and procedures under the Exchange Act as of April 2, 2022. Based on that evaluation, our management, including our principal executive officer and principal financial officer, concluded that our disclosure controls and procedures were effective as of April 2, 2022 at the reasonable assurance level.

Changes in Internal Control over Financial Reporting

There have been no changes in our internal control over financial reporting (as defined in Rule 13a-15(f) under the Exchange Act) that occurred during our fiscal quarter ended April 2, 2022 that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting. We have not experienced any material impact to our internal controls over financial reporting due to the fact that most of our employees responsible for financial reporting are working remotely or on a hybrid schedule during the COVID-19 pandemic. We are continually monitoring and assessing the impact of the COVID-19 pandemic on our internal controls to minimize the impact to their design and operating effectiveness.

PART II OTHER INFORMATION

For a description of our material pending legal proceedings refer to the information set forth under “Legal Matters” of Note 8, “Commitments and Contingencies,” to the Condensed Consolidated Financial Statements included in Part 1, Item 1 of this Form 10-Q.

Item 1A.

Risk Factors.

Below is a summary the principal factors and uncertainties that make investing in our company risky.  You should read this summary together with the more detailed description of each risk factor contained further below.

 

Risks Related to the Covid-19 Pandemic

 

The effects of the COVID-19 pandemic have affected our business and could in the future adversely affect our business, results of operations, and financial condition.

Risks Related to Our Operations

 

If we do not manage our supply chain effectively, our operating results may be adversely affected, and any increases in material, labor, supplier, logistics and other operating costs, or supply chain delays and shortages, could lower our margins or result in lost sales.

 

Variations in the amount of time it takes for us to sell our systems may cause fluctuations in our operating results, which could cause our stock price to decline.

 

We are subject to order and shipment uncertainties. Our profitability will decline if we fail to accurately forecast customer demand when managing inventory.

 

If we deliver systems with defects, our credibility will be harmed, and the sales and market acceptance of our systems will decrease.

 

Our integrated metrology systems are integrated with systems sold independently by wafer fabrication equipment suppliers, and a decrease in sales by these suppliers, or the development of competing systems by these suppliers, could harm our business.

23


 

Table of Contents

 

 

We must attract and retain experienced senior executives and other key personnel with knowledge of semiconductor device manufacturing and inspection, metrology or lithography equipment and related software to help support our future growth, and competition for such personnel in our industry is high.

 

Any prolonged disruption in the operations of our manufacturing facilities could have a material adverse effect on our revenue.

 

We may outsource select manufacturing activities to third-party service providers, which decreases our control over the performance of these functions and may result in lower quality and functionality of our products.

 

Our ability to fulfill our backlog may have an effect on our long-term ability to procure contracts and fulfill current contracts.

Risks Related to Our Customers

 

Our largest customers account for a substantial portion of our revenue, and our revenue and cash flows could decline considerably if one or more of these customers were to purchase significantly fewer of our systems or delay or cancel a large order.

Risks Related to Product Development

 

If we are not successful in developing new and enhanced products for the semiconductor device manufacturing industry, we will lose sales and market share to our competitors.

 

If new products developed by us do not gain general market acceptance, we will be unable to generate revenue and recover our research and development costs.

 

Even if we are able to develop new products that gain market acceptance, sales of these new products could impair our ability to sell existing products.

 

If our relationships with our large customers deteriorate, our product development activities could be adversely affected.

Risks Related to Intellectual Property and Data Security

 

We may fail to adequately protect our intellectual property and, therefore, lose our competitive advantage.

 

Protection of our intellectual property rights, or the efforts of third parties to enforce their own intellectual property rights against us, may result in costly and time-consuming litigation, substantial damages, lost product sales and/or the loss of important intellectual property rights.

 

If our network security measures are breached and unauthorized access is obtained to a customer’s data, to our data, or to our information technology systems, we may incur significant legal and financial exposure and liabilities and may experience disruptions in our operations.

Risks Related to Competition

 

Some of our current and potential competitors have significantly greater resources than we do, and increased competition could impair sales of our products or cause us to reduce our prices.

 

Because of the high cost of switching equipment vendors in our markets, it is sometimes difficult for us to win new customers from our competitors even if our systems are superior to theirs.

Risks Related to Our International Operations

 

We are subject to compliance with foreign laws and regulations, and the burden of complying with such laws and regulations, or any failure to comply, may adversely affect our business, financial condition and results of operations. 

 

Tariffs and other market barriers have impacted and may continue to impact our competitiveness with non-U.S. customers, which may adversely affect our results of operations. 

 

Political and economic instability may result in reduced demand for our products. 

 

Natural disasters, changes in climate and geo-political events, such as the Russia-Ukraine conflict, could materially adversely affect our worldwide operations (or those of our business partners).

 

We may face difficulties in staffing and managing foreign branch operations due to political tensions or cultural differences. 

 

Currency fluctuations may impact our international sales or expose us to exchange rate risk. 

 

Our internal controls with respect to anti-corruption laws may not be effective, and any failure to comply with such laws may result in severe sanctions and liabilities, which may negatively affect our business, operating results and financial condition.

Risks Related to Tax Laws, Financial Markets and the Environment

 

Changes in tax rates or tax liabilities could affect results.

24


 

Table of Contents

 

 

Turmoil or fluctuations in the credit markets and the financial services industry may negatively impact our business, results of operations, financial condition or liquidity, and our factoring arrangements may expose us to additional risks.

 

We are subject to various environmental laws and regulations that could impose substantial costs upon us, and failure to comply with such laws and regulations may harm our business, operating results and financial condition.

 

Customer and investor focus on our environmental, social and governance responsibility practices and policies, and related regulatory requirements, may make our supply chain more complex, and any failure to comply with customer or investor guidelines or applicable laws and regulations may adversely affect our relationship with customers and investors or our reputation and results of operations.

Risks Related to Growth and Acquisitions

 

We may choose to acquire new and complementary businesses, products or technologies instead of developing them ourselves, and we may be unable to complete these acquisitions or may not be able to successfully integrate an acquired business in a cost-effective and non-disruptive manner.

 

If we cannot effectively manage growth, our business may suffer.

Risks Related to the Global Economy and the Semiconductor Industry

 

Cyclicality in the semiconductor device industry has led to substantial decreases in demand for our systems in the past and may, from time to time, continue to do so.

 

Our future rate of growth is highly dependent on the development and growth of the market for microelectronic device inspection, lithography and metrology equipment.

General Risk Factors

 

Provisions of our charter documents and of Delaware law could discourage potential acquisition proposals and/or delay, deter or prevent a change in control of our company.

 

Our stock price is volatile.

Risks Related to the COVID-19 Pandemic

The effects of the COVID-19 pandemic have affected our business and could in the future adversely affect our business, results of operations, and financial condition.

The effects of the public health crisis caused by the COVID-19 pandemic and the measures being taken to limit the spread of COVID-19 are uncertain and difficult to predict, but pose the following risks to our business, results of operations and financial condition:

 

Disruptions to our supply chain in connection with the sourcing of materials, equipment and engineering support, and services from geographic areas that have been impacted by COVID-19 and by efforts to contain the spread of COVID-19, which have resulted and may continue to result in increased costs, material shortages, the inability to fully satisfy customer demand in a timely manner and increased risk of inventory obsolescence due to the resulting need to commit to increased purchases and provide longer lead times to secure critical components;

 

Disruption of operations if employees are unavailable due to illness, risk of illness, travel restrictions, remote work or other factors that may limit our access to key personnel or critical skills, or reduce productivity, and a shortage of available skilled personnel;

 

A potential decrease in short-term and/or long-term demand for our products and disruptions to our operations resulting from the immediate consequences of and responses to the pandemic, including precautionary measures instituted by governments and businesses to mitigate its spread, which have raised the prospect of an extended global recession, which would adversely impact the businesses of our customers, suppliers and partners;

 

Changes in our operations in response to COVID-19 and employee illnesses resulting from the pandemic have resulted in, and may continue to result in, a reduction in qualification activities with customers and a reduction in production levels, and may further result in a reduction in sales to our customers and product development efforts.

In addition, there may be incremental costs related to business continuity initiatives, which cannot be avoided or alleviated through succession planning, employees working remotely or teleconferencing technologies as well as inefficiencies, delays, and increased costs resulting from our efforts to mitigate the impact and spread of COVID-19 through the changes in our operations which we have enacted at certain of our locations around the world in an effort to protect our employees’ health and well-being (including the implementation of work-from-home policies, social-distancing measures, modified work schedules and shifts, the suspension of employee travel, and limits  on

25


 

Table of Contents

the number of employees attending in-person meetings and the number of people permitted to be present at our facilities at any one time);

 

Management focus on mitigating the impact of the COVID-19 pandemic, which has required and will continue to require a substantial investment of time and resources across our enterprise, which has resulted and can be expected to continue to result in a diversion of management attention and resources;

 

Delays in our ability to install or service our products due to travel bans or the requirement to quarantine for a lengthy period after entering a jurisdiction;

 

An increase in potential opportunities for the Company to be subject to an adverse cybersecurity event as a result of the implementation of our work-from-home policy, which could give rise to business disruptions, loss of information, intellectual property and critical data as well as other negative impacts;

 

A potential decrease in availability under our credit agreement, which permits us to borrow up to 70% of the value of eligible securities held at the time the line of credit is accessed, if there is a decrease in the value of eligible securities resulting from the impact of COVID-19 on global markets; and

 

Potential difficulty accessing capital, if needed in the future, through a sale of securities, or in obtaining favorable terms of such securities, due to market conditions generally or a decline or volatility in the market for our securities.

The resumption of normal business operations after such interruptions may be delayed or constrained by lingering effects of COVID-19 on our suppliers, third-party service providers, and/or customers. These effects, alone or taken together, could have a material adverse effect on our business, results of operations, legal exposure, or financial condition. The duration of the COVID-19 pandemic, resurgences, the severity of newly identified strains of the virus and the efficacy of vaccines and treatments with respect to new strains cannot be determined. Additional sustained or prolonged outbreaks of virus variants, delays in rollout of any needed boosters or modifications to vaccines to address variants, or continued widespread hesitancy to utilize vaccines could exacerbate the adverse impact of such measures.

Risks Related to Our Operations

If we do not manage our supply chain effectively, our operating results may be adversely affected, and any increases in material, labor, supplier, logistics and other operating costs, or supply chain delays and shortages, could lower our margins or result in lost sales.

We need to continually evaluate our global supply chains and assess opportunities to reduce costs. We must also enhance quality, speed and flexibility to meet changing demand for our products and product mix and uncertain market conditions. Our success also depends in part on refining our cost structure and supply chains so that we have flexibility and can maintain and improve profitability. Deteriorations in the tariff environment, or changes in suppliers, may cause our costs to increase, which if we are not able to offset by charging higher sales prices, will cause a decline in our margins. To improve our margins on a product, we will need to establish high volume supply agreements with our vendors. We cannot be certain that we will be able to timely negotiate vendor supply agreements on improved terms and conditions, or at all. Failure to achieve the desired level of cost reductions could adversely affect our financial results. Despite our efforts to control costs and increase efficiency in our facilities, changes in demand could still cause us to realize lower operating margins and profitability.

Further, our gross margins and financial performance may be adversely affected by increases in our operating costs, such as material, labor, supplier costs, logistics and energy costs, all of which have been and may continue to be subject to inflationary pressures. Operating costs have increased and may continue to increase further as a result of supply chain disruptions in connection with the sourcing of components, materials, equipment, engineering support, and services, labor shortages and other cost increases due to the COVID-19 pandemic and related government restrictions on travel and business operations.  We may also experience production delays, disruptions and cost increases due to the worldwide shortage of semiconductor components as a result of sharp increases in demand for semiconductor products in general.

These risks may be heightened because we obtain some of the components and subassemblies included in our systems from a limited group of suppliers and do not have long-term contracts with many of our suppliers. Our dependence on limited source suppliers of components and our lack of long-term contracts with many of our suppliers expose us to several risks, including a potential inability to obtain an adequate supply of components, price increases, late deliveries and poor component quality.  A significant number of our suppliers are the sole source or single source for certain components or subassemblies.  If such a supplier is unable or unwilling to manufacture and deliver components to us on the time schedule and of the quality or quantity that we require, we may be forced to seek to engage an additional or replacement supplier or redesign our product to use alternative components, which could result in additional expenses and delays in product development or shipment of product to our customers. Disruption or termination of the supply of components has delayed and could continue to delay shipments of some of our systems.  Such delays may damage our customer relationships and reduce our sales. From time to time in the past, we have experienced temporary difficulties, and supply chain disruptions and logistics and shipping challenges caused by the COVID-19 pandemic and related restrictions on movement and business operations are currently causing difficulties and delays, in receiving shipments from our suppliers. The lead-time required for shipments of some of our

26


 

Table of Contents

components can be greater than six months. In addition, the lead time required to qualify new suppliers for lasers and certain optics could be as long as a year, and the lead time required to qualify new suppliers of other components could be as long as nine months. In some cases, we may need to purchase components in advance of receiving customer orders for product. If we are unable to accurately predict our component needs, or if our component supply is disrupted, as it has been due to supply chain disruptions, logistics difficulties and shipping delays due to the COVID-19 pandemic, we may miss market opportunities by not being able to meet the demand for our systems. Further, a significant increase in the price of one or more of these components or subassemblies could seriously harm our results of operations and cash flows.

Our efforts to mitigate any cost increases, labor impacts and supply chain delays and shortages may not be successful, and we cannot predict the duration of these current trends or other future increases in operating costs. We may not be able to pass cost increases through to our customers fully (or at all), and if supply chain delays and shortages delay delivery of our products, our customers may seek to purchase from our competitors. Any such occurrence may have a material adverse impact on our gross margins and business, financial position, results of operations and cash flows.

Variations in the amount of time it takes for us to sell our systems may cause fluctuations in our operating results, which could cause our stock price to decline.

Variations in the length of our sales cycles could cause our revenue and cash flows, and consequently, our business, financial condition, operating results and cash flows to fluctuate widely from period to period. This variation could cause our stock price to decline. Our customers generally take a long time to evaluate our inspection and/or film metrology systems and many people are involved in the evaluation process. We expend significant resources educating and providing information to our prospective customers regarding the uses and benefits of our systems in the semiconductor fabrication process. The length of time it takes for us to make a sale depends upon many factors, including, but not limited to:

 

the efforts of our sales force;

 

the complexity of the customer’s fabrication processes;

 

the internal technical capabilities and sophistication of the customer;

 

the customer’s budgetary constraints; and

 

the quality and sophistication of the customer’s current metrology, inspection or lithography equipment.

Because of the number of factors influencing the sales process, the period between our initial contact with a customer and the time when we recognize revenue from that customer and receive payment, if ever, varies widely in length. Our sales cycles, including the time it takes for us to build a product to customer specifications after receiving an order to the time we recognize revenue, typically range from three to twenty-four months. Sometimes our sales cycles can be much longer, particularly with customers in Asia. During these cycles, we commit substantial resources to our sales efforts in advance of receiving any revenue, and we may never receive any revenue from a customer despite our sales efforts. If we do make a sale, our customers often purchase only one of our systems, the performance of which they then evaluate for a lengthy period before purchasing any more of our systems. The number of additional products a customer purchases, if any, depends on many factors, including the customer’s capacity requirements. The period between a customer’s initial purchase and any subsequent purchases can vary from three months to a year or longer, and variations in the length of this period could cause further fluctuations in our operating results and, possibly, in our stock price.

We are subject to order and shipment uncertainties. Our profitability will decline if we fail to accurately forecast customer demand when managing inventory.

We typically plan production and inventory levels based on internal forecasts of customer demand, which can be highly unpredictable and can fluctuate substantially, which could lead to excess inventory write-downs and resulting negative impacts on gross margin and net income. We have limited visibility into our customers’ inventories, future customer demand and the product mix that our customers will require, which could adversely affect our production forecasts and operating margins. In addition, innovation in our industry could render significant portions of our inventory obsolete. If we overestimate our customers’ requirements, we may have excess inventory, which could lead to obsolete inventory and unexpected costs. Conversely, if we underestimate our customers’ requirements, or if we experience sustained disruptions to our supply chain or shipping delays, including those we are currently experiencing due to the COVID-19 pandemic, we may have inadequate inventory, which could lead to foregone revenue opportunities, loss of potential market share and damage to customer relationships as product deliveries may not be made on a timely basis, disrupting our customers’ production schedules. In response to anticipated long lead times to obtain inventory and materials from outside suppliers and foundries, we periodically order materials in advance of customer demand. This advance ordering has in the past and may in the future result in excess inventory levels or unanticipated inventory write-downs if expected orders fail to materialize, or other factors make our products less saleable. In addition, any significant future cancellation or deferral of product orders could adversely affect our revenue and margins, increase inventory write-downs due to obsolete inventory, and adversely affect our operating results and stock price.

27


 

Table of Contents

Our earnings could be negatively affected, and our inventory levels could materially increase, if we are unable to predict our inventory needs in an accurate and timely manner and adjust our orders for parts and subcomponents in the event that our needs increase or decrease materially due to unexpected increases or decreases in demand for our products. Any material increase in our inventories could result in an adverse effect on our financial position, while any material decrease in our ability to procure needed inventories could result in an inability to supply customer demand for our products, thus adversely affecting our revenue.

If we deliver systems with defects, our credibility will be harmed, and the sales and market acceptance of our systems will decrease.

Our systems are complex and have occasionally contained errors, defects and bugs when introduced. Defects may be created during probing, bumping, dicing or general handling, and can have a major impact on device and process quality. When this occurs, our credibility and the market acceptance and sales of our systems could be harmed. Further, if our systems contain errors, defects or bugs, computer viruses or malicious code as a result of cyber-attacks to our computer networks, we may be required to expend significant capital and resources to alleviate these problems. Defects could also lead to product liability as a result of product liability lawsuits against us or against our customers. We have agreed to indemnify our customers under certain circumstances against liability arising from defects in our systems provided that we also include a cap on our liability in the related sales agreements. Our product liability insurance policy currently provides both aggregate coverage as well as an overall umbrella coverage. In the event of a successful product liability claim, we could be obligated to pay damages significantly in excess of our product liability insurance limits.

Our integrated metrology systems are integrated with systems sold independently by wafer fabrication equipment suppliers, and a decrease in sales by these suppliers, or the development of competing systems by these suppliers, could harm our business.

We believe that sales of integrated metrology systems will continue to be an important source of our net revenues. Sales of our integrated metrology systems depend upon the ability of a small number of wafer fabrication equipment suppliers to sell semiconductor manufacturing equipment products that are compatible with our metrology systems as components. If these suppliers, such as Applied Materials, Inc., Ebara Corporation, Lam Research Corporation and Tokyo Electron, are unable to sell such products, if they choose to focus their attention on products that do not integrate with our systems, or if they choose to develop competing systems, our business could suffer.

We must attract and retain experienced senior executives and other key personnel with knowledge of semiconductor device manufacturing and inspection, metrology or lithography equipment and related software to help support our future growth, and competition for such personnel in our industry is high.

Our success depends, to a significant degree, upon the continued contributions of our key executive management, engineering, sales and marketing, customer support, finance and manufacturing personnel. The loss of any of these key personnel through resignations, retirement or other circumstances, each of whom would be extremely difficult to replace, could harm our business and operating results. Despite our employment and noncompetition agreements with key members of our senior management team, these individuals or other key employees may still leave us, which could have a material adverse effect on our business. We do not have key person life insurance on any of our executives. In addition, to support our future growth, we will need to attract and retain additional qualified employees. Competition for such personnel in our industry is intense, and we may not be successful in attracting and retaining qualified employees.

The expansion of high technology companies worldwide and growth in the demand for semiconductors following the onset of the COVID-19 pandemic have increased demand and competition for qualified personnel. Competition for engineering and other technical personnel in some of the markets in which we operate is especially intense due to continued increases in the number of technology companies worldwide.  In order to attract and retain executives and other key employees, we must provide a competitive compensation package, including cash and stock-based compensation.  If the anticipated value of our stock-based incentive awards does not materialize so that they cease to be viewed as valuable, if our profits decrease, or if our total compensation package is not viewed as competitive, our ability to attract, retain and motivate executives and key employees could be weakened.

Any prolonged disruption in the operations of our manufacturing facilities could have a material adverse effect on our revenue.

We produce the majority of our systems in our manufacturing facilities located in Milpitas, California and Bloomington, Minnesota. We use contract manufacturers in China, Japan and the United States. Our manufacturing processes are highly complex and require sophisticated and costly equipment and a specially designed facility. As a result, any prolonged disruption in the operations of our manufacturing facilities could seriously harm our ability to satisfy our customer order deadlines.  Shelter-in-place orders and other measures, including work-from-home and social distancing policies implemented during the COVID-19 pandemic to protect employees, have resulted in reduced workforce availability at product manufacturing sites and

28


 

Table of Contents

reduced output at some of our vendors and suppliers. Restrictions on our access to or operation of manufacturing facilities or on our support operations or workforce, or similar limitations for our vendors and suppliers, may impact our ability to meet customer demand and could have a material adverse effect on our financial condition and results of operations.  If we cannot timely deliver our systems, our results from operations and cash flows could be materially and adversely affected.

We may outsource select manufacturing activities to third-party service providers, which decreases our control over the performance of these functions and may result in lower quality and functionality of our products.

We may outsource product manufacturing to third-party service providers. Outsourcing reduces our control over the performance of the outsourced functions. Dependence on outsourcing may also adversely affect our ability to bring new products to market. If we do not effectively manage our outsourcing strategy or if third party service providers do not perform as anticipated, we may experience operational difficulties, increased costs, manufacturing interruptions or inefficiencies in the operation of our supply chain, any or all of which could delay our delivery of products to our customers, and materially and adversely affect our business, financial condition, and results of operations.

Our ability to fulfill our backlog may have an effect on our long-term ability to procure contracts and fulfill current contracts.

Our ability to fulfill our backlog may be limited by our ability to devote sufficient financial and human capital resources and may be limited by available material supplies. If we do not fulfill our backlog in a timely manner, we may experience delays in product delivery, which would postpone receipt of revenue from those delayed deliveries. Additionally, if we are consistently unable to fulfill our backlog, this may be a disincentive to customers to award large contracts to us in the future until they are comfortable that we can effectively manage our backlog.

Risks Related to Our Customers

Our largest customers account for a substantial portion of our revenue, and our revenue and cash flows could decline considerably if one or more of these customers were to purchase significantly fewer of our systems or delay or cancel a large order.

Sales to end user customers that individually represent at least ten percent of our revenue typically account for, in the aggregate, a considerable amount of our revenue. We operate in the highly concentrated, capital-intensive semiconductor device manufacturing industry. Historically, a substantial portion of our revenue in each quarter and year has been derived from sales to relatively few customers, and this trend is expected to continue. If any of our key customers were to purchase significantly fewer of our systems in the future, or if they delay or cancel a large order, our revenue and cash flows could meaningfully decline. We expect that we will continue to depend on a small number of large customers for a sizable portion of our revenue. In addition, as large semiconductor device manufacturers seek to establish closer relationships with their suppliers, we expect that our customer base will become even more concentrated.

Risks Related to Product Development

If we are not successful in developing new and enhanced products for the semiconductor device manufacturing industry, we will lose sales and market share to our competitors.

We operate in an industry that is highly competitive and subject to evolving industry standards, rapid technological changes, rapid changes in consumer demands and the rapid introduction of new, higher performance systems with shorter product life cycles. To be competitive in our demanding market, we must continually design, develop and introduce in a timely manner new lithography, inspection and metrology process control systems that meet the performance and price demands of semiconductor device manufacturers. We must also continue to refine our current systems so that they remain competitive. We expect to continue to make significant investments in our research and development activities and at times may make inventory investments prior to commercialization. We may experience difficulties or delays in our development efforts with respect to new systems, and we may not ultimately be successful in our product enhancement efforts to improve and advance products or in responding effectively to technological change, as not all research and development activities result in viable commercial products. In addition, we cannot provide assurance that we will be able to develop new products for the most opportunistic new markets and applications. Any significant delay in releasing new systems could cause our products to become obsolete, adversely affect our reputation, give a competitor a first-to-market advantage or cause a competitor to achieve greater market share.

In addition, our competitors may provide innovative technology that may have performance advantages over systems we currently offer or may offer in the future. They may be able to develop products comparable or superior to those that we offer or may adapt more quickly to new technologies or evolving customer requirements. In particular, we currently are developing additional product enhancements that we believe will address future customer requirements, but we may fail in a timely manner

29


 

Table of Contents

to complete the development or introduction of these additional product enhancements successfully, or these product enhancements may not achieve market acceptance or be competitive.

Further, customers that may otherwise desire to purchase our products from us and purchase other products from our competitors may nevertheless purchase competing products from our competitors rather than purchase our products due to a variety of reasons, including to gain favor or volume pricing from our competitors.

If new products developed by us do not gain general market acceptance, we will be unable to generate revenue and recover our investments.

Inspection, lithography and metrology product development is inherently risky because it is difficult to foresee developments in semiconductor device manufacturing technology, coordinate technical personnel, and identify and eliminate system design flaws. Further, our products are leading edge and complex, and often the applications to our customers’ businesses are unique. Any new systems we introduce may not achieve or sustain a significant degree of market acceptance and sales.

We expect to spend a significant amount of time and resources developing new systems and refining our existing systems. In light of the long product development cycles inherent in our industry, these expenditures will be made well in advance of the prospect of deriving revenue from the sale of those systems.  The long lead times for some components may also require us to place orders for components and accumulate inventory in advance of market acceptance of our products. Our ability to commercially introduce and successfully market new systems is subject to a wide variety of challenges during the development cycle, including start-up bugs, design defects, and other matters that could delay introduction of these systems.  Since our customers are not obligated by long-term contracts to purchase our systems, our anticipated product orders may not materialize, or orders that are placed may be canceled.  If we do not achieve market acceptance of new products, we may be unable to generate sufficient revenue and cash flow to recover our research and development costs and may result in a write down of our investments in inventory.  As a result, our market share, revenue, operating results or stock price would be negatively impacted.

Even if we are able to develop new products that gain market acceptance, sales of these new products could impair our ability to sell existing products.

Competition from our new systems could have a negative effect on sales of our existing systems and the prices that we could charge for these systems. We may also divert sales and marketing resources from our current systems in order to successfully launch and promote our new or next generation systems. This diversion of resources could have a further negative effect on sales of our current systems and the value of inventory.

If our relationships with our large customers deteriorate, our product development activities could be adversely affected.

The success of our product development efforts depends on our ability to anticipate market trends and the price, performance and functionality requirements of semiconductor device manufacturers. In order to anticipate these trends and ensure that critical development projects proceed in a coordinated manner, we must continue to collaborate closely with our largest customers. Our relationships with these and other customers provide us with access to valuable information regarding trends in the semiconductor device industry, which enables us to better plan our product development activities. If our current relationships with our large customers are impaired, or if we are unable to develop similar collaborative relationships with important customers in the future, our product development activities could be adversely affected.

Risks Related to Intellectual Property and Data Security

We may fail to adequately protect our intellectual property and, therefore, lose our competitive advantage.

Our future success and competitive position depend in part upon our ability to obtain and maintain proprietary technology for our principal product families, and we rely, in part, on patent, copyright and trade secret law and confidentiality agreements to protect that technology. If we fail to adequately protect our intellectual property, it will give our competitors a significant advantage. We own or have licensed a number of patents relating to our metrology, lithography, wafer and macro-defect inspection systems, including both embedded and application software, and have filed applications for additional patents.  Any of our pending patent applications may be rejected, and we may be unable to develop additional proprietary technology that is patentable in the future.

In addition, the patents that we do own or that have been issued or licensed to us may not provide us with competitive advantages and may be challenged by third parties. Further, third parties may also design around these patents. In addition to patent protection, we rely upon copyrights for protection of our proprietary software and documentation, trademarks for protection of our brand and source of goods, and trade secrets for protection of our confidential and proprietary information and technology.  However, we can give no assurance that our copyrights will be upheld or will successfully deter infringement by

30


 

Table of Contents

third parties. We routinely enter into confidentiality agreements with our employees and other third parties. Even though these agreements are in place, there can be no assurances that trade secrets and proprietary information will not be disclosed, that others will not independently develop substantially equivalent proprietary information and techniques or otherwise gain access to our trade secrets, or that we can fully protect our trade secrets and proprietary information. Violations by others of our confidentiality agreements and the loss of employees who have specialized knowledge and expertise could harm our competitive position and cause our sales and operating results to decline as a result of increased competition.  It also possible that third parties will misappropriate our trade secrets or other confidential information.  We may be subject to cybersecurity breaches in which a third party obtains our confidential information.  Third parties may also reverse engineer our products to copy our technology. Any of these circumstances could result in harm to our competitive position in the market.  Failure to protect our trademarks can lead to other companies selling products using confusing similar names, thereby damaging our brand. In some countries, it can be difficult to register trademarks because of the strict examination process or blocking trademarks for other goods. Costly and time-consuming litigation might be necessary to enforce and determine the scope of our intellectual property rights, and failure to obtain or maintain trade secret protection might adversely affect our ability to continue our research or bring products to market.

From time to time, we may find it necessary to initiate litigation against other persons or entities to protect and/or enforce our intellectual property or contractual rights. However, litigation is costly and time consuming and there is no assurance that any lawsuit we bring will yield the result that we seek, as (i) the lawsuit may be dismissed or there could be an adverse finding, (ii) we may not be able to pursue the lawsuit due to the laws of the applicable country or (iii) there may be a subsequent unfavorable change in law that limits our ability to pursue the lawsuit. For example, litigation discovery practice in China, Japan, South Korea, continental Europe and Taiwan is not as robust as the United States, so it can be more difficult to determine if a company is infringing on our patents and more challenging to bring a lawsuit.  Monitoring and preventing unauthorized use are also difficult and the measures we take to protect our intellectual property rights may not be adequate.  Accordingly, infringement of our intellectual property rights poses a serious risk of doing business. There is a risk that we may be unable to adequately protect our intellectual property rights in certain foreign countries. For example, our competitors may independently develop similar technology or duplicate our products.  If this occurs, it would be easier for our competitors to develop and sell competing products in these countries.

Protection of our intellectual property rights, or the efforts of third parties to enforce their own intellectual property rights against us, may result in costly and time-consuming litigation, substantial damages, lost product sales and/or the loss of important intellectual property rights.

We may be required to initiate litigation in order to enforce our intellectual property rights or to determine the noninfringement, scope or validity of a third party’s intellectual property rights. Any litigation, regardless of outcome, could be expensive and time consuming and could subject us to significant liabilities or require us to re-engineer our products or obtain expensive licenses from third parties. There can be no assurance that any patents, copyrights or other intellectual property rights issued to or licensed by us will not be challenged, invalidated or circumvented, or that the rights granted thereunder will provide us with a competitive advantage.  Furthermore, there is no assurance that any litigation we are involved in will yield the result that we seek as (i) the lawsuit may be dismissed or there could be an adverse finding, (ii) we may not be able to pursue the lawsuit due to the laws of the applicable country or (iii) there may be a subsequent unfavorable change in law that limits our ability to pursue the lawsuit.

In addition, our commercial success depends in part on our ability to avoid infringing or misappropriating patents or other intellectual property rights owned by third parties. From time to time, we receive communications from third parties asserting that our products or systems infringe, or may infringe, on the intellectual property rights of these third parties. These claims of infringement may lead to protracted and costly litigation, which could require us to pay substantial damages or have the sale of our products or systems stopped by an injunction. Infringement claims could also cause product or system delays or require us to redesign our products or systems, and these delays could result in the loss of substantial revenue. We may also be required to obtain a license from the third party or cease activities utilizing the third party’s intellectual property rights. We may not be able to enter into such a license or such a license may not be available on commercially reasonable terms. Accordingly, the loss of an intellectual property dispute could hinder our ability to sell our products or systems or make the sale of our products or systems more expensive, which could lead to reduced revenue or lower margins, respectively.

If our network security measures are breached and unauthorized access is obtained to a customer’s data, to our data, or to our information technology systems, we may incur significant legal and financial exposure and liabilities and may experience disruptions in our operations.

As part of our business, we store our data and certain data about our customers, vendors and employees in our information technology system.  If there is a breach as a result of third-party action, employee error, malfeasance, break-ins or otherwise, of our security measures designed to protect this information and prevent data loss and other security breaches, and someone obtains unauthorized access to our customers’, vendors’ or employees’ data, we could face loss of business, regulatory investigations or court orders, our reputation could be severely damaged, we could be required to expend significant

31


 

Table of Contents

capital and other resources to alleviate the problem, as well as incur significant costs and liabilities, including due to litigation, indemnity obligations, damages for contract breach, penalties for violation of applicable laws or regulations, and costs for remediation and other incentives offered to customers.  In December 2021, a vulnerability was reported for the widely used Java logging library, Apache Log4j 2. We have reviewed the use of this library within our software product portfolio and in our IT environment, determined that it has not had a material adverse impact on our business or operations, and have taken steps to mitigate the vulnerability.  

Cyber-attacks and other malicious internet-based activities continue to increase. In response to the COVID-19 pandemic, our expanded reliance on remote access to our information systems has further increased our exposure to potential cybersecurity breaches.  As the techniques used to obtain unauthorized access or sabotage systems change frequently and generally are not identified until they are launched against a target, our ability to anticipate these techniques or to implement adequate preventative measures is reduced. In addition, third parties have made attempts to fraudulently induce employees or users to disclose information to gain access to our data or our customers’ data. As a result of any of these events, our or our customers’ and vendors’ information could be accessed or disclosed improperly. In addition, cybersecurity incidents affecting our customers could result in substantial delays in our ability to ship to those customers or install our products, which could result in delays in revenue recognition or the cancellation of orders, and cybersecurity incidents affecting our suppliers could result in substantial delays in our ability to obtain necessary components for our products from those suppliers, which could hamper our ability to ship our products to our customers, harming our results of operations and our customer relationships.  Any or all of these issues could negatively affect our ability to attract new customers, cause existing customers to choose to purchase from our competitors, result in reputational damage or subject us to third-party lawsuits, regulatory fines or other action or liability, which could adversely affect our operating results.

The General Data Protection Regulation (“GDPR”) is a regulation in European Union (“EU”) law on data protection and privacy for the individuals within the EU and the European Economic Area (“EEA”). It also addresses the export of personal data outside the EU and EEA areas. We are also subject to the California Consumer Privacy Act (“CCPA”).  Moreover, a new privacy law, the California Privacy Rights Act (“CPRA”), was approved by California voters in November 2020. The CPRA will significantly modify the CCPA when it becomes effective in most material respects on January 1, 2023.  We may also be subject to other data privacy laws in the United States and the other countries in which we operate.  In many cases, these laws apply not only to third-party transactions, but also to transfers of information between us and our subsidiaries, and among the subsidiaries and other parties with which we have commercial relations. The introduction of new products or expansion of our activities in certain jurisdictions may subject us to additional laws and regulations.  These U.S. federal and state and foreign laws and regulations, including GDPR which can be enforced by private parties or government entities, are constantly evolving and can be subject to significant change. In addition, the application and interpretation of these laws and regulations, including GDPR, are often uncertain, particularly in our evolving industry, and may be interpreted and applied differently from country to country. Appropriate technical and organizational measures are necessary to implement these data protection principles.  These laws and regulations can be costly to comply with and may delay or impede the development of new products, result in negative publicity, increase our operating costs, require significant management time and attention, or subject us to inquiries or investigations, claims or other remedies, including fines, which may be significant, or demands that we modify or cease existing business practices. A failure by us, our suppliers, or other parties with whom we do business to comply with posted privacy policies or with other federal, state, or international privacy-related or data protection laws and regulations, including GDPR, CCPA, CPRA and other new or changing privacy laws and regulations, could result in proceedings against us by governmental entities or others, which could have a material adverse effect on our business, results of operations, and financial condition.

Risks Related to Competition

Some of our current and potential competitors have significantly greater resources than we do, and increased competition could impair sales of our products or cause us to reduce our prices.

The market for semiconductor capital equipment is highly competitive. We face substantial competition from established companies in each of the markets we serve. We principally compete with KLA Corporation, Nova Measuring Instruments, Camtek, Ushio, Canon, and PDF Solutions. We compete to a lesser extent with Nikon. Each of our products also competes with products that use different metrology, inspection or lithography techniques. Some of our competitors have greater financial, engineering, manufacturing and marketing resources, broader product offerings and service capabilities and larger installed customer bases than we do. As a result, these competitors may be able to respond more quickly to new or emerging technologies or market developments by devoting greater resources to the development, promotion and sale of products, which, in turn, could impair sales of our products. Further, there may be significant merger and acquisition activity among our competitors and potential competitors, which, in turn, may provide them with a competitive advantage over us by enabling them to rapidly expand their product offerings and service capabilities to meet a broader range of customer needs.

Many of our customers and potential customers in the semiconductor device manufacturing industry are large companies that require global support and service for their semiconductor capital equipment. We believe that our global support and

32


 

Table of Contents

service infrastructure is sufficient to meet the needs of our customers and potential customers. However, some of our competitors have more extensive infrastructures than we do, which could place us at a disadvantage when competing for the business of global semiconductor device manufacturers. Many of our competitors are investing heavily in the development of new systems that will compete directly with our systems. We have, from time to time, selectively reduced prices on our systems in order to protect our market share, and competitive pressures may necessitate further price reductions. We expect our competitors in each product area to continue to improve the design and performance of their products and to introduce new products with competitive prices and performance characteristics. These product introductions would likely require us to decrease the prices of our systems and increase the level of discounts that we grant our customers. Price reductions or lost sales as a result of these competitive pressures would reduce our total revenue and could adversely impact our financial results.

Because of the high cost of switching equipment vendors in our markets, it is sometimes difficult for us to win new customers from our competitors even if our systems are superior to theirs.

We believe that once a semiconductor device manufacturer has selected one vendor’s capital equipment for a production-line application, the manufacturer generally relies upon that capital equipment and, to the extent possible, subsequent generations of the same vendor’s equipment for the life of the application. Once a vendor’s equipment has been installed in a production line application, a semiconductor device manufacturer must often make substantial technical modifications and may experience production-line downtime in order to switch to another vendor’s equipment. Accordingly, unless our systems offer performance or cost advantages that outweigh a customer’s expense of switching to our systems, it will be difficult for us to achieve significant sales to that manufacturer once it has selected another vendor’s capital equipment for an application.

Risks Related to Our International Operations

We are subject to compliance with foreign laws and regulations, and the burden of complying with such laws and regulations, or any failure to comply, may adversely affect our business, financial condition and results of operations

Our business is subject to risks inherent in doing business internationally, including compliance with, inconsistencies among, and unexpected changes in, a wide variety of foreign laws and regulatory environments with which we are not familiar, including, among other issues, with respect to employees, protection of our intellectual property, and a wide variety of operational regulations and trade and export controls under domestic, foreign, and international law.

We are faced with various risks that may be associated with our compliance with existing, new, different, inconsistent or conflicting laws, regulations and rules enacted by governments and/or their regulatory agencies in the countries in which we operate as well as rules and policies implemented at our customer sites. These laws, regulations, rules and policies could relate to any of an array of issues including, but not limited to, environmental, tax, intellectual property, trade secrets, product liability, contracts, antitrust, employment, securities, import/export and unfair competition. The cost of maintaining compliance under multiple and changing regulatory regimes may adversely affect our business, financial condition and results of operations.  In the event that we fail to comply with or violate U.S. or foreign laws or regulations or customer policies, we could be subject to civil or criminal claims or proceedings that may result in monetary fines, penalties or other costs against us or our employees, which may adversely affect our operating results, financial condition, customer relations and ability to conduct our business.

Tariffs and other market barriers have impacted and may continue to impact our competitiveness with non-U.S. customers, which may adversely affect our results of operations. 

The semiconductor device industry is a high-visibility industry in many of the European and Asian countries in which we sell our products. Because the governments of these countries have provided extensive financial support to our semiconductor device manufacturing customers in these countries, we believe that our customers could be disproportionately affected by any trade embargoes, excise taxes, tariffs or other restrictions imposed by their governments on trade with U.S. companies such as ourselves, particularly with respect to the ongoing tensions between the United States and China.

Over the last several years, the U.S. government has significantly expanded export controls on certain technologies and commodities to certain markets, particularly with respect to semiconductor and other high technology exports to China. For example, effective June 29, 2020, the U.S. Department of Commerce imposed new export controls on the transfer of many U.S. products and technologies, including many commercial-grade electronics, to “military end users” or for “military end use” in China, which may include many Chinese commercial companies that sell products to or do business with the Chinese military. Likewise, since May 2019, the U.S. Department of Commerce has imposed significant restrictions on the transfer of any products from the United States, as well as many products produced overseas that incorporate U.S. content or rely on U.S. software or technology, to Huawei Technologies Co., Ltd., and a large number of its overseas affiliates, including HiSilicon, followed by a comparable action in December of 2020, related to Semiconductor Manufacturing International Corporation (SMIC). and a large number of its overseas affiliates, including Ningbo Semiconductor International Corporation (NSIC) and SJ Semiconductor (Jiangyin) Corporation.  It is possible that the U.S. government will impose additional export controls on our products or systems, which could lead to further revenue losses.

33


 

Table of Contents

The effect of these changes, among others, is that U.S. companies are now required to obtain export licenses before providing commodities, software, and technology that are subject to the regulations to customers for whom licensing requirements did not previously apply. The administrative processing, attendant delays and risk of ultimately not obtaining required export approvals put us at a disadvantage relative to our non-U.S. competitors who are not required to comply with U.S. export controls. This difficulty and uncertainty has adversely affected our ability to compete for and win business from domestic customers in China. Foreign customers affected by these and any future U.S. government sanctions or threats of sanctions may respond by developing their own solutions to replace our products or by utilizing our foreign competitors’ products.

Further, we hold inventory of products that may be affected by the recent U.S. government actions, including potential order cancellations. If the sale of these products is delayed or we are unable to return or dispose of our inventory on favorable economic terms, we may incur additional carrying costs for the inventory or otherwise record charges associated with this inventory.

The U.S. government is also engaged in an ongoing process of assessing which “emerging and foundational technologies” warrant new or additional controls, which could subject additional U.S.-origin products and services to more stringent export restrictions. It is possible that these modified regulations, and any future regulations, could reduce demand for our products. In particular, these restrictive measures may reduce overall global demand for our customers’ products or for other products produced or manufactured in the United States or based on U.S. technology, in turn reducing demand for our products, which could have a material adverse effect on our business, financial condition and results of operations.  International trade disputes could result in increases in tariffs and other trade restrictions and protectionist measures that could adversely impact our operations and reduce the competitiveness of our products relative to local and global competitors.

Political and economic instability may result in reduced demand for our products

We are subject to various global risks related to political and economic instabilities in countries in which we derive sales. If terrorist activities, armed conflict, civil or military unrest or political instability occurs outside of the United States, these events may result in reduced demand for our products. Based on the complex relationships among China, Hong Kong, Taiwan, and the United States, there is risk that political, diplomatic, and national security influences might lead to trade, technology, or capital disputes, or disruptions, in particular those affecting the semiconductor industry. This may adversely affect our business in Asia or have a negative impact on the regional or global economy.

In addition, an outbreak of hostilities or other political upheaval in China, Taiwan, Japan, or South Korea, or an economic downturn in Asia or globally, would likely harm the operations of our customers in these countries. The effect of these types of events on our revenue and cash flows could be material because we derive substantial revenue from sales to semiconductor device foundries in Taiwan such as Taiwan Semiconductor Manufacturing Company Ltd., from memory chip manufacturers in South Korea such as Samsung Electronics Co., Ltd., and from semiconductor device manufacturers in Japan such as Toshiba Corporation.

Natural disasters, changes in climate and geo-political events, such as the Russia-Ukraine conflict, could materially adversely affect our worldwide operations (or those of our business partners).

The occurrence of one or more natural disasters such as hurricanes, tropical storms, fires, cyclones, earthquakes, tsunamis, flooding, typhoons, volcanic eruptions and weather conditions such as major or extended winter storms, droughts and tornadoes, whether as a result of climate change or otherwise, may disrupt manufacturing or other operations. For example, our Milpitas operations are located near major earthquake fault lines in California. There may also be conflict or uncertainty in the countries in which we operate, including public health issues (for example, an outbreak of a contagious disease such as COVID-19, avian influenza, measles or Ebola), safety issues, natural disasters, fire, disruptions of service from utilities, nuclear power plant accidents or general economic or political unrest, including war, civil unrest or terrorist attacks. We cannot provide any assurance that alternate means of conducting our operations (whether through alternate production capacity or service providers or otherwise) would be available if a major disruption were to occur or that, if such alternate means were available, they could be obtained on favorable terms.  We have no operations in Russia, Belarus or Ukraine and do not have significant customers or suppliers in any of those countries.  Consequently, to date, our operations have not been materially adversely affected by Russia’s invasion of Ukraine.  However, if the Russia-Ukraine conflict escalates and/or the U.S. and other jurisdictions impose additional sanctions on Russia and its supporters, there could be a disruption to the global economy and/or supply chains that could adversely affect our business. For example, components used in certain of our products use raw materials that are sourced from Russia and Ukraine; if supply of those materials is disrupted it could adversely impact our ability manufacture and sell those products, which could adversely affect our results of operations.

We may face difficulties in staffing and managing foreign branch operations due to political tensions or cultural differences

During periods of tension between the governments of the United States and certain other countries, it is often difficult for U.S. companies such as ours to staff and manage operations in such countries. Language and other cultural differences may also inhibit our sales and marketing efforts and create internal communication problems among our U.S. and foreign research

34


 

Table of Contents

and development teams, increasing the difficulty of managing multiple remote locations performing various development, quality assurance, and yield ramp analysis projects.

Currency fluctuations may impact our international sales or expose us to exchange rate risk. 

A substantial portion of our international sales are denominated in U.S. dollars. As a result, if the dollar rises in value in relation to foreign currencies, our systems will become more expensive to customers outside the United States and less competitive with systems produced by competitors outside the United States. These conditions could negatively impact our international sales. Foreign sales also expose us to collection risk in the event it becomes more expensive for our foreign customers to convert their local currencies into U.S. dollars. Additionally, in the event a larger portion of our revenue becomes denominated in foreign currencies, we would be subject to a potentially significant exchange rate risk, and any failure to sufficiently hedge or otherwise manage these risks could materially and adversely affect our financial condition, results of operations, and liquidity.

Our internal controls with respect to anti-corruption laws may not be effective, and any failure to comply with such laws may result in severe sanctions and liabilities, which may negatively affect our business, operating results and financial condition.

We are subject to the Foreign Corrupt Practices Act of 1977, as amended (the “FCPA”), and other laws that prohibit improper payments or offers of payments to foreign governments and their officials and political parties by U.S. persons and issuers as defined by the statute, for the purpose of obtaining or retaining business. Also, similar worldwide anti-bribery laws, such as the U.K. Bribery Act and Chinese anti-corruption laws, generally prohibit companies and their intermediaries from making improper payments to non-U.S. officials for the purpose of obtaining or retaining business. Some of our distribution partners are located in parts of the world that have experienced governmental corruption to some degree and, in certain circumstances, strict compliance with anti-bribery laws may conflict with local customs and practices. The policies and procedures we have implemented to discourage these practices by our employees, our existing safeguards and any future improvements may prove to be ineffective, and our employees, consultants, sales agents or distributors may engage in conduct for which we might be held responsible. Violations of the FCPA or international anti-corruption laws may result in severe criminal or civil sanctions, and we may be subject to other liabilities, which could negatively affect our business, operating results and financial condition. In addition, the U.S. government may seek to hold us liable for successor liability FCPA violations committed by companies in which we invest or that we acquire. We cannot assure you that our internal control policies and procedures will protect us from reckless or negligent acts committed by our employees, distributors, partners, consultants or agents.

Risks Related to Tax Laws, Financial Markets and the Environment

Changes in tax rates or tax liabilities could affect results.

As a global company, we are subject to taxation in the United States and various other countries. Significant judgment is required to determine and estimate worldwide tax liabilities. Our future annual and quarterly tax rates could be affected by numerous factors, including changes in the (1) applicable tax laws; (2) composition of earnings in countries with differing tax rates; or (3) recoverability of our deferred tax assets and liabilities. Beginning in 2022, the U.S. Tax Cuts and Jobs Act of 2017 (“TCJA”) eliminated the existing option to deduct research and development expenditures and requires taxpayers to amortize them over five years pursuant to IRC Section 174. Although Congress is considering legislation that would defer the amortization requirement to later years, we have no assurance that the provision will be repealed or otherwise modified. The requirement will reduce our cash flows for 2022, unless repealed.  In addition, recent proposals to increase the U.S. corporate income tax rate, increase U.S. taxation of international business operations and impose a global minimum tax could have a negative impact on our tax position depending upon the terms of the final enacted legislation. Based on the nature of the uncertainties around specific legislation to be enacted, we have not quantified the impact of this risk.  Many countries and organizations such as the Organization for Economic Cooperation and Development are also actively considering changes to existing tax laws or have proposed or enacted new laws that could increase our tax obligations in countries where we do business or cause us to change the way we operate our business. Any of these developments or changes in federal, state, or international tax laws or tax rulings could adversely affect our effective tax rate and our results of operations.

In addition, we are subject to regular examination of our income tax returns by the Internal Revenue Service and other tax authorities. We regularly assess the likelihood of favorable or unfavorable outcomes resulting from these examinations to determine the adequacy of our provision for income taxes. Although we believe our tax estimates are reasonable, there can be no assurance that any final determination will not be materially different from the treatment reflected in our historical income tax provisions and accruals, which could materially and adversely affect our results of operations.

The Organization for Economic Co-operation and Development (“OECD”), released guidance covering various topics, including country-by-country reporting, definitional changes to permanent establishment and Base Erosion and Profit Shifting (“BEPS”), an initiative that aims to standardize and modernize global tax policy. Depending on the final form of guidance adopted by OECD members and legislation ultimately enacted, if any, there may be significant consequences for us due to our

35


 

Table of Contents

international business activities, including, but not limited to, an increase in our tax uncertainty and adverse effects on our provision for income taxes.

Turmoil or fluctuations in the credit markets and the financial services industry may negatively impact our business, results of operations, financial condition or liquidity, and our factoring arrangements may expose us to additional risks.

In the past, global credit markets and the financial services industry have experienced periods of turmoil and upheaval characterized by the tightening of the credit markets, the weakening of the global economy and an unprecedented level of intervention from the United States and other governments. Adverse economic conditions, such as sustained periods of economic uncertainty or a crisis in the financial markets may have a material adverse effect on our liquidity and financial condition if our ability to obtain credit from the capital financial markets, or from trade creditors was impaired. In addition, a worsening economy or an economic crisis could also adversely impact our customers’ ability to finance the purchase of systems from us or our suppliers’ ability to provide us with product, either of which may negatively impact our business and results of operations.

We are subject to various environmental laws and regulations that could impose substantial costs upon us, and failure to comply with such laws and regulations may harm our business, operating results and financial condition.

Some of our operations use substances regulated under various federal, state, local, and international laws governing the environment, including those relating to the storage, use, discharge, disposal, labeling, and human exposure to hazardous and toxic materials. We could incur costs, fines and civil or criminal sanctions, third-party property damage or personal injury claims, or could be required to incur substantial investigation or remediation costs, if we were to violate or become liable under environmental laws. Liability under environmental laws can be joint and several and without regard to comparative fault. Compliance with current or future environmental laws and regulations could restrict our ability to expand our facilities or require us to acquire additional expensive equipment, modify our manufacturing processes, or incur other significant expenses. We may unintentionally violate environmental laws or regulations in the future as a result of human error, equipment failure or other causes.  In addition to the potential adverse effects on our business operations of such an event, we are committed to maintaining safe working conditions for our employees and sourcing, manufacturing, and distributing our products in a responsible and environmentally friendly manner, and any failure on our part to do so may cause reputational harm for the Company.

Customer and investor focus on our environmental, social and governance responsibility practices and policies, and related regulatory requirements, may make our supply chain more complex, and any failure to comply with customer or investor guidelines or applicable laws and regulations may adversely affect our relationship with customers and investors or our reputation and results of operations.

There is an increasing focus on corporate environmental, social and governance (“ESG”) responsibility in the semiconductor industry, particularly with OEMs that manufacture consumer electronics. A number of our customers have adopted, or may adopt, procurement policies that include ESG provisions or requirements that their suppliers should comply with, or they may seek to include such provisions or requirements in their procurement terms and conditions. An increasing number of investors are also requiring companies to disclose corporate ESG policies, practices and metrics. Legal and regulatory requirements, as well as investor expectations, on corporate ESG practices and disclosure, are subject to change, can be unpredictable, and may be difficult and expensive for us to comply with, given the complexity of our supply chain and manufacturing. If we are unable to comply, or are unable to cause our suppliers or contract manufacturers to comply, with such policies or provisions or meet the requirements of our customers and our investors, a customer may stop purchasing products from us or an investor may sell their shares, and may take legal action against us, which could harm our reputation, revenue and results of operations.

Risks Related to Growth and Acquisitions

We may choose to acquire new and complementary businesses, products or technologies instead of developing them ourselves, and we may be unable to complete these acquisitions or may not be able to successfully integrate an acquired business in a cost-effective and non-disruptive manner.

Our success depends on our ability to continually enhance and broaden our product offerings in response to changing technologies, customer demands and competitive pressures. To this end, we have, from time to time, engaged in the process of identifying, analyzing and negotiating possible acquisition transactions, and, from time to time, acquiring one or more businesses, and we expect to continue to do so in the future. We may choose to acquire new and complementary businesses, products, technologies and/or services instead of developing them ourselves. We may, however, face competition for acquisition targets from larger and more established companies with greater financial resources, making it more difficult for us to complete acquisitions. We cannot provide any assurance that we will be successful in consummating future acquisitions on favorable terms or that we will realize the benefits that we anticipate from one or more acquisitions that we consummate.

36


 

Table of Contents

Integrating any business, product, technology or service into our current operations could be expensive and time-consuming and/or disrupt our ongoing business. Further, there are numerous risks associated with acquisitions and potential acquisitions, including, but not limited to:

 

diversion of management’s attention from day-to-day operational matters and current products and customers;

 

lack of synergy or the inability to successfully integrate the new business or to realize expected synergies;

 

integration of acquired businesses and their operations, including enterprise resource planning systems, may be costly and time-consuming and divert resources away from other projects;

 

failure to commercialize the new technology or business;

 

failure to meet the expected performance of the new technology or business;

 

failure to retain key employees and customer or supplier relationships;

 

lower-than-expected market opportunities or market acceptance of any new products; and

 

unexpected reduction of sales of existing products as a result of the introduction of new products.

Our inability to consummate one or more acquisitions on favorable terms, or our failure to realize the intended benefits from one or more acquisitions, could have a material adverse effect on our business, liquidity, financial position and/or results of operations, including as a result of our incurrence of indebtedness and related interest expense and our assumption of unforeseen contingent liabilities. We might need to raise additional funds through public or private equity or debt financings to finance any acquisition. In that event, we could be forced to obtain financing on terms that are not favorable to us and, in the case of equity financing, that result in dilution to our stockholders. In addition, any impairment of goodwill or other intangible assets, amortization of intangible assets, write-down of other assets or charges resulting from the costs of acquisitions and purchase accounting could harm our business and operating results.

If we cannot effectively manage growth, our business may suffer.

Over the long-term, we intend to grow our business by increasing our sales efforts and completing strategic acquisitions. To effectively manage growth, we must, among other things:

 

engage, train and manage a larger sales force and additional service personnel;

 

expand the geographic coverage of our sales force;

 

expand our information systems;

 

identify and successfully integrate acquired businesses into our operations; and

 

administer appropriate financial and administrative control procedures.

Growth of our business will likely place a significant strain on our management, financial, operational, technical, sales and administrative resources. Any failure to effectively manage our growth may cause our business to suffer and our stock price to decline.

Risks Related to the Global Economy and the Semiconductor Industry

Cyclicality in the semiconductor device industry has led to substantial decreases in demand for our systems in the past and may, from time to time, continue to do so.

Our operating results are subject to significant variation due to global economic conditions and the cyclical nature of the semiconductor device industry. Our business depends upon the capital expenditures of semiconductor device manufacturers, which, in turn, depend upon the current and anticipated market demand for semiconductors and products using semiconductors. The timing, length and severity of the up-and-down cycles in the semiconductor equipment industry are difficult to predict. In recent history, the industry has experienced significant downturns, generally in connection with declines in economic conditions.. This cyclical nature of the industry in which we operate affects our ability to accurately predict future revenue and, thus, future expense levels. When cyclical fluctuations result in lower than expected revenue levels, operating results may be adversely affected, and cost reduction measures may be necessary in order for us to remain competitive and financially sound. During a down cycle, we must be in a position to adjust our cost and expense structure to prevailing market conditions and to continue to motivate and retain our key employees. In addition, during periods of rapid growth, we must be able to increase manufacturing capacity and personnel to meet customer demand. We can provide no assurance that these objectives can be met in a timely manner in response to industry cycles, and we cannot predict when and to what extent sales may normalize, or when and to what extent gross margins may improve, following any such occurrence. If we fail to respond to industry cycles, our business could be seriously harmed.

We may also experience supplier or customer issues as a result of adverse macroeconomic conditions. If our customers have difficulties in obtaining capital or financing, this could result in lower sales. Customers with liquidity issues could also

37


 

Table of Contents

result in an increase in bad debt expense. These conditions could also affect our key suppliers, which could affect their ability to supply parts and result in delays of our customer shipments.

Our future rate of growth is highly dependent on the development and growth of the market for microelectronic device inspection, lithography and metrology equipment.

We target our products to address the needs of microelectronic device manufacturers for defect inspection, metrology and lithography.  If for any reason the market for microelectronic device inspection, lithography or metrology equipment fails to grow in the long term, we may be unable to maintain current revenue levels in the short term and maintain our historical growth in the long term. Growth in the inspection market is dependent to a large extent upon microelectronic manufacturers replacing manual inspection with automated inspection technology. Growth in the metrology market is dependent to a large extent upon new chip designs and capacity expansion of microelectronic manufacturers. Growth in the lithography market is dependent on the development of cost-effective packaging with high fine pitch RDLs, ultimately migrating to multi-die, large, form-factor packages. There can be no assurance that manufacturers will undertake these actions at the rate we expect.

General Risk Factors

Provisions of our charter documents and of Delaware law could discourage potential acquisition proposals and/or delay, deter or prevent a change in control of our company.

Provisions of our certificate of incorporation and by-laws may inhibit changes in control of our company not approved by our Board of Directors. These provisions also limit the circumstances in which a premium can be paid for our common stock and in which a proxy contest for control of our board may be initiated. These provisions provide for:

 

a prohibition on stockholder actions through written consent;

 

a requirement that special meetings of stockholders be called only by the chairperson of our Board of Directors or majority of our directors;

 

advance notice requirements for stockholder proposals and director nominations by stockholders;

 

the authority of our Board of Directors to issue, without stockholder approval, preferred stock with such terms as the Board may determine; and

 

the authority of our board, without stockholder approval, to adopt a stockholder rights plan.

We are also entitled to avail ourselves of the protections of Section 203 of the Delaware General Corporation Law, which could inhibit changes in control of the Company.

Our stock price is volatile.

The market price of our common stock has fluctuated widely. Consequently, the current market price of our common stock may not be indicative of future market prices, and we may be unable to sustain or increase the value of an investment in our common stock. Factors affecting our stock price may include:

 

variations in operating results from quarter to quarter;

 

changes in earnings estimates by analysts or our failure to meet analysts’ expectations;

 

changes in the market price per share of our public company customers;

 

market conditions in the semiconductor and other industries into which we sell products;

 

general economic conditions;

 

political changes, hostilities or natural disasters such as hurricanes and floods;

 

the impact of the COVID-19 pandemic, or other future infectious disease pandemics, on the global economy and on our customers, suppliers, employees, and business;

 

low trading volume of our common stock; and

 

the number of firms making a market in our common stock.

38


 

Table of Contents

 

In addition, the stock market has experienced periods of significant price and volume fluctuations. These fluctuations have particularly affected the market prices of the securities of high technology companies like ours. Any such market fluctuations in the future could adversely affect the market price of our common stock.

Item 2. Unregistered Sales of Equity Securities and Use of Proceeds

In November 2020, the Onto Innovation Board of Directors approved a share repurchase authorization, which allows the Company to repurchase up to $100 million worth of shares of its common stock.  Repurchases may be made through both public market and private transactions from time to time with shares purchased being subsequently retired. At April 2, 2022, there was $100 million available for future share repurchases.  For further information, see Note 16, “Share Repurchase Authorization” of the Notes to the Condensed Consolidated Financial Statements.

In addition to our share repurchase program, we withhold common stock shares associated with net share settlements to cover tax withholding obligations upon the vesting of restricted stock unit awards and stock option exercises under the Company’s equity incentive program. During the three months ended April 2, 2022, we withheld 60 thousand shares through net share settlements.  For the three months period ended April 2, 2022, net share settlements cost $5.3 million. Please refer to Note 10, “Share-Based Compensation,” of the Notes to the Condensed Consolidated Financial Statements for further discussion regarding our equity incentive plan.

The following table provides details of common stock purchased during the three months ended April 2, 2022 (in thousands, except per share data):

 

Period

 

Total Number

of Shares

Purchased (1)

 

 

Average Price Paid per Share

 

 

Total Number of Shares Purchased as Part of Publicly Announced Program

 

 

Maximum Approximate Dollar Value of Shares that May Yet be Purchased Under the Program

 

January 2, 2022 - February 2, 2022

 

 

 

 

$

 

 

 

 

 

$

100,000

 

February 3, 2022 - March 2, 2022

 

 

46

 

 

$

89.84

 

 

 

 

 

$

100,000

 

March 3, 2022 - April 2, 2022

 

 

14

 

 

$

84.84

 

 

 

 

 

$

100,000

 

Three months ended April 2, 2022

 

 

60

 

 

$

88.76

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1 Includes shares withheld through net share settlements.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Item 3. Defaults Upon Senior Securities

None.

Item 4. Mine Safety Disclosures

None.

Item 5. Other Information

None.

39


 

Table of Contents

Item 6. Exhibits

 

 

Exhibit No.

Description

 

 

3.1

Amended and Restated Certificate of Incorporation of Onto Innovation Inc., dated October 25, 2019, incorporated by reference to Exhibit 3.2 to the Company’s Form 8-K filed with the SEC on October 28, 2019 (File No. 001-39110).

 

 

3.2

Amended and Restated Bylaws of Onto Innovation Inc., dated January 22, 2020, incorporated by reference to Exhibit 3.1 to the Company’s Form 8-K filed with the SEC on January 27, 2020 (File No. 001-39110).

 

 

10.1*+

Offer Letter to Yoon Ah E. Oh, dated October 4, 2021, by and between Yoon Ah E. Oh and Onto Innovation Inc.

 

 

31.1*

Rule 13a-14(a) Certification of Chief Executive Officer of the Registrant pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.

 

 

31.2*

Rule 13a-14(a) Certification of Chief Financial Officer of the Registrant pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.

 

 

32.1**

Certification of the Chief Executive Officer pursuant to 18 U.S.C Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.

 

 

32.2**

Certification of the Chief Executive Officer pursuant to 18 U.S.C Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.

 

 

101.INS*

Inline XBRL Instance Document – the instance document does not appear in the Interactive Data File because its XBRL tags are embedded within the Inline XBRL document.

 

 

101.SCH*

Inline XBRL Taxonomy Extension Schema Document

 

 

101.CAL*

Inline XBRL Taxonomy Extension Calculation Linkbase Document

 

 

101.DEF*

Inline XBRL Taxonomy Extension Definition Linkbase Document

 

 

101.LAB*

Inline XBRL Taxonomy Extension Label Linkbase Document

 

 

101.PRE*

Inline XBRL Taxonomy Extension Presentation Linkbase Document

 

 

104*

Cover Page Interactive Data File (formatted as Inline XBRL and included in Exhibit 101)

 

 

* Filed herewith.

**Furnished herewith.

+Management contract, compensatory plan or arrangement.

40


 

Table of Contents

SIGNATURES

Pursuant to the requirements of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.

 

 

 

Onto Innovation Inc.

 

 

 

Date:

May 3, 2022

By:

/s/ Michael P. Plisinski

 

 

Michael P. Plisinski

 

 

Chief Executive Officer

 

 

 

 

Date:

May 3, 2022

By:

/s/ Steven R. Roth

 

 

Steven R. Roth

 

 

Senior Vice President, Chief Financial Officer and Principal Accounting Officer

 

 

41

Onto Innovation (NYSE:ONTO)
Historical Stock Chart
From Feb 2024 to Mar 2024 Click Here for more Onto Innovation Charts.
Onto Innovation (NYSE:ONTO)
Historical Stock Chart
From Mar 2023 to Mar 2024 Click Here for more Onto Innovation Charts.