SUBSEA RESOURCES: A possible Treasure Trove

A Semisubmersible Rig
Source: Department of the Interior
Semisubmersible Rigs

Semisubmersible rigs are the most common type of offshore drilling rigs, combining the advantages of submersible rigs with the ability to drill in deep water. Semisubmersible rigs work on the same principle as submersible rigs; through the 'inflating' and 'deflating' of its lower hull. The main difference with a semisubmersible rig, however, is that when the air is let out of the lower hull, the rig does not submerge to the sea floor. Instead, the rig is partially submerged, but still floats above the drill site. When drilling, the lower hull, filled with water, provides stability to the rig. Semisubmersible rigs are held in place by huge anchors, each weighing upwards of ten tons. These anchors, combined with the submerged portion of the rig, ensure that the platform is stable and safe enough to be used in turbulent offshore waters. Semisubmersible rigs can be used to drill in much deeper water than the rigs mentioned above.

A DRILLSHIP

Drillships are exactly as they sound: ships designed to carry out drilling operations. These boats are specially designed to carry drilling platforms out to deep-sea locations. A typical drillship will have, in addition to all of the equipment normally found on a large ocean ship, a drilling platform and derrick located on the middle of its deck. In addition, drillships contain a hole (or 'moonpool'), extending right through the ship down through the hull, which allow for the drill string to extend through the boat, down into the water. Drillships are often used to drill in very deep water, which can often be quite turbulent. Drillships use what is known as 'dynamic positioning' systems. Drillships are equipped with electric motors on the underside of the ships hull, capable of propelling the ship in any direction. These motors are integrated into the ships computer system, which uses satellite positioning technology, in conjunction with sensors located on the drilling template, to ensure that the ship is directly above the drill site at all times.