Ampco-Pittsburgh Corporation
(Exact name of registrant as specified in its charter)
|
|
|
|
|
Pennsylvania
|
|
001-00898
|
|
25-1117717
|
(State or other jurisdiction
of incorporation)
|
|
(Commission
File Number)
|
|
(IRS Employer
Identification No.)
|
|
|
726 Bell Avenue, Suite 301, Carnegie, Pennsylvania
|
|
15106
|
(Address of principal executive office)
|
|
(Zip Code)
|
(412) 456-4400
Registrants telephone number, including area code
Maria Trainor
Vice
President, General Counsel & Secretary
(412) 456-4470
(Name and telephone number, including area code, of the person to contact in connection with this report.)
Check the appropriate box to indicate the rule pursuant to which this form is being filed, and provide the period to which the information in this form
applies:
☒
|
Rule 13p-1 under the Securities Exchange Act (17 CFR 240.13p-1) for the reporting period from January 1 to December 31, 2016.
|
Item 1.01
|
Conflict Minerals Disclosure and Report
|
Introduction
This Specialized Disclosure Report on Form SD (this
Report
) is filed pursuant to Rule 13p-1 promulgated under the Securities
Exchange Act of 1934, as amended (the
Exchange Act
), for the reporting period from January 1, 2016 to December 31, 2016. This rule requires disclosure of certain information when a company manufactures or contracts
to manufacture products for which gold, columbite-tantalite (coltan), cassiterite, wolframite, tantulum, tin and/or tungsten (collectively, the
Conflict Minerals
) are necessary to the functionality or production of such
products.
Ampco-Pittsburgh Corporation (including its consolidated subsidiaries as the context may require, the
Corporation
or
the
Registrant
) has determined that tin and tungsten (together, the
Identified Minerals
) were necessary to the functionality or production of one or more products manufactured by the Corporation or
contracted by the Corporation to be manufactured (the
Covered Products
) during the period covered by this Report. As such, the Corporation has conducted in good faith a reasonable country of origin inquiry
(an
RCOI
) to determine whether any of the Identified Minerals in the Covered Products (1) originated in the Democratic Republic of the Congo or any adjoining country (i.e., Angola, Burundi, Central African Republic, the
Republic of the Congo, Rwanda, South Sudan, Tanzania, Uganda or Zambia) (the
Covered Countries
) or (2) are from recycled or scrap sources.
As discussed more fully below, based on the Corporations RCOI, the Corporation has concluded that (a) it does not have any reason to believe that
any of the Identified Minerals used in connection with the Covered Products may have originated in a Covered Country or (b) it has reason to believe that the Identified Minerals used in connection with the Covered Products may be from recycled
or scrap sources.
The Corporation and its Business Segments
The Corporation was incorporated in Pennsylvania in 1929 and manufactures and sells highly engineered, high performance specialty metal products and customized
equipment utilized by industry throughout the world. The Corporation classifies its business in two segments: Forged and Cast Engineered Products and Air and Liquid Processing.
Forged and Cast Engineered Products Segment
Historically, the Forged and Cast Engineered Products segment consisted of Union Electric Steel Corporation (
Union Electric Steel
) and Union
Electric Steel UK Limited. In March 2016, Union Electric Steel acquired Åkers AB, a leader in the production of forged and cast rolls, and certain of its affiliates. In November 2016, Union Electric Steel acquired the stock of ASW Steel Inc.,
a specialty steel producer based in Canada (ASW).
The Forged and Cast Engineered Products segment has operations in the United States,
England, Sweden, Slovenia and Canada and has an equity interest in three joint-venture companies in China. The companies comprising this segment produce ingot, forged products and cast products that service a wide variety of industries globally. The
Forged and Cast Engineered Products segment specializes in the production of forged hardened steel rolls used mainly for cold rolling by producers of steel, aluminum and other metals and cast rolls for hot and cold strip mills, medium/heavy section
mills and plate mills in a variety of iron and steel qualities. With the acquisition of Åkers AB, the roll business of this segment is now operating under the name
2
Union Electric Åkers. In addition, this segment produces ingot and open-die forged products which are used in the gas and oil industry and the aluminum and plastic extrusion
industries. The acquisition of ASW helped to support the Corporations diversification efforts in the open-die forging market.
Air and Liquid
Processing Segment
The Air and Liquid Processing segment consists of Aerofin, Buffalo Air Handling and Buffalo Pumps, all divisions of Air &
Liquid Systems Corporation, a wholly-owned subsidiary of the Corporation. This segment has operations in Virginia and New York, with headquarters in Carnegie, Pennsylvania, and distributes a significant portion of its products through a common
independent group of sales offices located throughout the United States and Canada.
Aerofin produces custom-engineered finned tube heat exchange coils
and related heat transfer products for a variety of industries including OEM/commercial, fossil fuel power generation, nuclear power generation and industrial manufacturing.
Buffalo Air Handling produces large custom-designed air handling systems for institutional markets (e.g., hospitals and universities), pharmaceutical markets
and general industrial building markets.
Buffalo Pumps manufactures centrifugal pumps for the fossil fuel power generation, marine defense and industrial
refrigeration industries.
Reasonable Country of Origin Inquiry
In accordance with the Exchange Act and the rules and regulations thereunder, the Corporation performed an assessment of its product line to examine which of
the products manufactured by it or contracted to be manufactured by it contained one or more Conflict Minerals that were necessary for the functionality or production of such identified products. The Corporation concluded that certain of its
products contained one or more of the Identified Minerals of tin and tungsten. Consequently, the Corporation conducted in good faith an RCOI with respect to the Identified Minerals in such Covered Products. The purpose of the RCOI was to determine
whether any of such Identified Minerals (1) originated in a Covered Country or (2) are from recycled or scrap sources.
After identifying the
Covered Products, the Corporation then identified which supplier may have provided materials included in the Covered Products that potentially contained any of the Identified Minerals. The Corporation contacted each of these suppliers and informed
them of its obligations with respect to conducting an RCOI and filing this Report pursuant to the Exchange Act. The Corporation also provided each of these suppliers with the most recent due diligence template developed by the Electronic Industry
Citizenship Coalition (the
EICC
) and the Global e-Sustainability Initiative (the
GeSI
), commonly referred to as the Conflict Mineral Report Template (the
CMRT
).
The Corporation uses a network of suppliers from numerous countries across multiple continents. The materials sourced from the Corporations suppliers
are not purchased directly from the smelters where they originated. As such, the Corporation relies on information provided by its suppliers who are, in many cases, themselves sometimes several tiers separated from the smelter at which the original
minerals were smelted. The Corporations suppliers (many of whom are not subject to the reporting requirements of the Exchange Act) rely on their own suppliers to provide them with information regarding the materials that they source, or they
may purchase the materials on the secondary market from recycled or scrap sources.
3
Once the information was received from suppliers, the Corporation compiled all of the CMRTs and analyzed them
individually and compared the smelters and refiners identified in the CMRT supply-chain survey against the list of smelter facilities which have been identified as conflict free by programs such as the Conflict-Free Smelter Program of
the EICC/GeSI Conflict-Free Sourcing Initiative (the
CFSI
).
Results of the Corporations Good Faith RCOI and Due
Diligence Process
Suppliers & Smelters
In connection with the Corporations use of tin and tungsten in Covered Products, a total of 21 suppliers were identified through the Corporations
due diligence process:
|
|
|
4 suppliers of tungsten to Union Electric Åkers or ASW;
|
|
|
|
1 supplier of tin and 1 supplier of tungsten and tin to Aerofin;
|
|
|
|
1 supplier of tungsten to Buffalo Air Handling; and
|
|
|
|
14 suppliers of tin to Buffalo Pumps.
|
Each of these suppliers reported to the Corporation that the supplied
Identified Minerals were (1) not sourced from a Covered Country or (2) originated from recycled or scrap sources.
Despite the
Corporations best efforts to follow up with certain suppliers, the Corporation did not receive complete and thorough responses from all of them. There are numerous reasons for the Corporations inability to receive complete responsiveness
from its suppliers and to identify the full supply chain or originating smelter:
|
|
|
the Corporation is wholly dependent on information received from its direct suppliers to conduct its good faith RCOI process;
|
|
|
|
many suppliers are not subject to the reporting requirements of the Exchange Act;
|
|
|
|
the Corporations suppliers operate with varying levels of sophistication and contact with the parties necessary to provide accurate information regarding the smelter name and location for all of the Identified
Minerals; and
|
|
|
|
it is difficult to require cooperation from suppliers who are, in some cases, multiple tiers away from the smelter of the Identified Minerals.
|
As a result, the Corporation has not been able to identify all of the smelters from which its suppliers sourced the Identified Minerals (other than those
identified as from recycled or scrap sources). For the Identified Minerals for which the Corporation was able to identify information about the smelter through the relevant supplier, the name and location of that smelter is indicated in the tables
below. Because this information is provided by the Corporations suppliers, the Corporation cannot be certain that these smelters were in fact in the Corporations supply chain.
4
The Corporation has noted that each of the smelters identified below, other than those marked with an asterisk
(the
Identified Smelters
), is currently on the conflict-free smelters list published by the CFSI. In addition, each of the Corporations suppliers of Identified Minerals sourced from the Identified Smelters has indicated
to the Corporation that the applicable Identified Smelter does not source the Identified Mineral from any Covered Country.
1.
|
The following smelters were responsible for the tungsten sourced by suppliers of Union Electric Åkers or ASW:
|
|
|
|
Smelter Name
|
|
Location of Smelter
|
Asia Tungsten Products Vietnam Ltd.
|
|
Vietnam
|
Ganzhou Huaxing Tungsten Products Co., Ltd.
|
|
China
|
Ganzhou Jiangwu Ferrotungsten Co., Ltd.
|
|
China
|
Moliren Ltd.
|
|
Russia
|
Vietnam Youngsun Tungsten Industry Co., Ltd.
|
|
Vietnam
|
2.
|
The following smelters were responsible for the tin sourced by suppliers of Aerofin:
|
|
|
|
Smelter Name
|
|
Location of Smelter
|
Cooperativa Metalurgica de Rondônia Ltda.
|
|
Brazil
|
CV Tiga Sekawan
|
|
Indonesia
|
EM Vinto
|
|
Bolivia
|
Malaysia Smelting Corporation (MSC)
|
|
Malaysia
|
Metallo Belgium N.V.
|
|
Belgium
|
Mineração Taboca S.A.
|
|
Brazil
|
Minsur
|
|
Peru
|
PT Mitra Stania Prima
|
|
Indonesia
|
PT Timah (Persero) Tbk Kundur
|
|
Indonesia
|
PT Timah (Persero) Tbk Mentok
|
|
Indonesia
|
PT Tinindo Inter Nusa
|
|
Indonesia
|
Thaisarco
|
|
Thailand
|
White Solder Metalurgia e Mineração Ltda.
|
|
Brazil
|
The Corporation was unable to identify any smelters of tungsten sourced by suppliers of Aerofin.
3.
|
The following smelters were responsible for the tungsten sourced by suppliers of Buffalo Air Handling:
|
|
|
|
Smelter Name
|
|
Location of Smelter
|
Chongyi Zhangyuan Tungsten Co., Ltd
|
|
China
|
Ganzhou Huaxing Tungsten Products Co., Ltd.
|
|
China
|
Global Tungsten & Powders Corp.
|
|
United States
|
Jiangxi Gan Bei Tungsten Products Co., Ltd.
|
|
China
|
Plansee SE Reuttev*
|
|
Austria
|
Wolfram Bergbau und Hutten AG
|
|
Austria
|
Xiamen Tungsten Co., Ltd.
|
|
China
|
5
4.
|
The following smelters were responsible for the tin sourced by suppliers of Buffalo Pumps:
|
|
|
|
Smelter Name
|
|
Location of Smelter
|
China Tin Group Co, Ltd.
|
|
China
|
Cooperativa Metalurgica de Rondônia Ltda.
|
|
Brazil
|
CV United Smelting
|
|
Indonesia
|
EM Vinto
|
|
Bolivia
|
Fenix Metals
|
|
Poland
|
Gejiu Non-Ferrous Metal Processing Co., Ltd.
|
|
China
|
Gejiu Zili Mining and Metallurgy Co., Ltd.*
|
|
China
|
Malaysia Smelting Corporation (MSC)
|
|
Malaysia
|
Melt Metais e Ligas S.A.
|
|
Brazil
|
Metallo Belgium N.V.
|
|
Belgium
|
Mineração Taboca S.A.
|
|
Brazil
|
Minsur
|
|
Peru
|
Operaciones Metalurgical S.A.
|
|
Bolivia
|
PT ATD Makmur Mandiri Jaya
|
|
Indonesia
|
PT Babel Inti Perkasa
|
|
Indonesia
|
PT Bangka Prima Tin
|
|
Indonesia
|
PT Bangka Timah Utama Sejahtera*
|
|
Indonesia
|
PT Bangka Tin Industry
|
|
Indonesia
|
PT Belitung Industri Sejahtera
|
|
Indonesia
|
PT Bukit Timah
|
|
Indonesia
|
PT DS Jaya Abadi
|
|
Indonesia
|
PT Eunindo Usaha Mandiri
|
|
Indonesia
|
PT Inti Stania Prima
|
|
Indonesia
|
PT Lautan Harmonis Sejahtera
|
|
Indonesia
|
PT Mitra Stania Prima
|
|
Indonesia
|
PT Prima Timah Utama
|
|
Indonesia
|
PT Refined Bangka Tin
|
|
Indonesia
|
PT Sariwiguna Binasentosa
|
|
Indonesia
|
PT Stanindo Inti Perkasa
|
|
Indonesia
|
PT Tambang Timah (Banka)*
|
|
Indonesia
|
PT Timah (Persero) Tbk Kundur
|
|
Indonesia
|
PT Timah (Persero) Tbk Mentok
|
|
Indonesia
|
PT Tinindo Inter Nusa
|
|
Indonesia
|
Rui Da Hung
|
|
Taiwan
|
Soft Metais Ltda.
|
|
Brazil
|
Thaisarco
|
|
Thailand
|
VQB Mineral and Trading Group JSC
|
|
Vietnam
|
White Solder Metalurgia e Mineração Ltda.
|
|
Brazil
|
Yunnan Tin Company Limited
|
|
China
|
6
Conclusion
Based on the information obtained pursuant to the good faith RCOI and due diligence processes described above, the Corporation has concluded that:
|
|
|
it does not have any reason to believe that any of the Identified Minerals used in connection with the Covered Products may have originated in a Covered Country; or
|
|
|
|
it has reason to believe that the Identified Minerals used in connection with the Covered Products may be from recycled or scrap sources.
|
Website Disclosure
This Report, including this Conflict
Minerals Disclosure, is available at the Corporations website at www.ampcopittsburgh.com. The information on, or otherwise available through, the Corporations website is not part of this Report.
Forward-Looking Statements
This Report includes
forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995 that involve various risks and uncertainties. All statements in this Report other than statements of historical fact are statements that are, or
could be, deemed forward-looking statements within the meaning of such Act. Words such as may, intend, will, believe and expect, and other terms of similar meaning that indicate future
events and trends are also generally intended to identify forward-looking statements. Forward-looking statements are not guarantees of future performance. Except as required by applicable law, the Corporation assumes no obligation, and disclaims any
obligation, to update forward-looking statements whether as a result of new information, events or otherwise.
7
SIGNATURE
Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned
hereunto duly authorized.
|
|
|
AMPCO-PITTSBURGH CORPORATION
|
|
|
By:
|
|
/s/ Maria Trainor
|
Name:
|
|
Maria Trainor
|
Title:
|
|
Vice President, General Counsel & Secretary
|
Dated: May 23, 2017
8
Ampco Pittsburgh (NYSE:AP)
Historical Stock Chart
From Mar 2024 to Apr 2024
Ampco Pittsburgh (NYSE:AP)
Historical Stock Chart
From Apr 2023 to Apr 2024