UNITED STATES
SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

 

FORM 20-F

  

o REGISTRATION STATEMENT PURSUANT TO SECTION 12(b) OR 12(g) OF THE SECURITIES EXCHANGE ACT OF 1934

OR

x ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the fiscal year ended December 31, 2015

OR

o TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

OR

o SHELL COMPANY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

  

Commission file number: 001-16125

 

CO-NAME

(Exact name of Registrant as specified in its charter)

 

Advanced Semiconductor Engineering, Inc.

(Translation of Registrant’s Name into English)

 

REPUBLIC OF CHINA

(Jurisdiction of Incorporation or Organization)

 

26 Chin Third Road

Nantze Export Processing Zone

Nantze, Kaohsiung, Taiwan

Republic of China

(Address of Principal Executive Offices)

 

Joseph Tung

Room 1901, No. 333, Section 1 Keelung Rd.

Taipei, Taiwan, 110

Republic of China

Tel: 886-2-6636-5678

Fax: 882-2-2757-6121

Email: ir@aseglobal.com

(Name, Telephone, Email and/or Facsimile number and Address of Company Contact Person)

 

Securities registered or to be registered pursuant to Section 12(b) of the Act:

 

Title of Each Class Name of Each Exchange on which Registered
Common Shares, par value NT$10.00 each The New York Stock Exchange*

 

 

 

 

*Traded in the form of American Depositary Receipts evidencing American Depositary Shares (the “ADSs”), each
representing five common shares of Advanced Semiconductor Engineering, Inc. 

 

Securities registered or to be registered pursuant to Section 12(g) of the Act:

 

None

 

Securities for which there is a reporting obligation pursuant to Section 15(d) of the Act:

 

None

 

Indicate the number of outstanding shares of each of the issuer’s classes of capital or common stock as of the close of the period covered by the annual report:

 

7,909,741,896 Common Shares, par value NT$10 each**

 

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.

 

Yes   x   No   o

 

If this report is an annual or transition report, indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934.

 

Yes   o   No   x

 

Indicate by check mark whether the Registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the Registrant was required to file such reports) and (2) has been subject to such filing requirements for the past 90 days.

 

Yes   x   No   o

 

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).

 

Yes   o   No   x

  

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, or a non-accelerated filer. See definition of “accelerated filer and large accelerated filer” in Rule 12b-2 of the Exchange Act. (Check one):

 

Large accelerated filer   x Accelerated filer   o Non-accelerated filer o

 

Indicate by check mark which basis of accounting the registrant has used to prepare the financial statements included in this filing:

 

U.S. GAAP o International Financial Reporting Standards as issued by the International Accounting Standards Board x Other o

 

If “Other” has been checked in response to the previous question, indicate by check mark which financial statement item the registrant has elected to follow:

 

Item 17  o   Item 18   o

 

 

If this is an annual report, indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).

 

Yes   o   No   x

 

** As a result of the exercise of employee stock options subsequent to December 31, 2015, as of March 31, 2016, we had 7,918,272,896 shares outstanding.

 

 

 

 

 

 

 

table of contents

Page

USE OF CERTAIN TERMS 1
SPECIAL NOTE REGARDING FORWARD-LOOKING STATEMENTS 5
PART I 6
Item 1.  Identity of Directors, Senior Management and Advisers 6
Item 2.  Offer Statistics and Expected Timetable 6
Item 3.  Key Information 6
SELECTED FINANCIAL DATA 6
CAPITALIZATION AND INDEBTEDNESS 9
REASON FOR THE OFFER AND USE OF PROCEEDS 9
RISK FACTORS 9
Item 4.  Information on the Company 29
HISTORY AND DEVELOPMENT OF THE COMPANY 29
BUSINESS OVERVIEW 31
ORGANIZATIONAL STRUCTURE 53
PROPERTY, PLANTS AND EQUIPMENT 55
Item 4A.  Unresolved Staff Comments 59
Item 5.  Operating and Financial Review and Prospects 59
OPERATING RESULTS AND TREND INFORMATION 59
LIQUIDITY AND CAPITAL RESOURCES 70
RESEARCH AND DEVELOPMENT 73
OFF-BALANCE SHEET ARRANGEMENTS 74
TABULAR DISCLOSURE OF CONTRACTUAL OBLIGATIONS 74
Item 6.  Directors, Senior Management and Employees 75
DIRECTORS AND SENIOR MANAGEMENT 75
COMPENSATION 81
BOARD PRACTICES 82
EMPLOYEES 82
SHARE OWNERSHIP 83
Item 7.  Major Shareholders and Related Party Transactions 84
MAJOR SHAREHOLDERS 84
RELATED PARTY TRANSACTIONS 85
INTERESTS OF EXPERTS AND COUNSEL 86
Item 8.  Financial Information 86
CONSOLIDATED STATEMENTS AND OTHER FINANCIAL INFORMATION 86
SIGNIFICANT CHANGES 89
Item 9.  The Offer and Listing 89
OFFER AND LISTING DETAILS 89
PLAN OF DISTRIBUTION 91
MARKETS 91
SELLING SHAREHOLDERS 91
DILUTION 91
EXPENSES OF THE ISSUE 91
Item 10.  Additional Information 91
SHARE CAPITAL 91
ARTICLES OF INCORPORATION 91
MATERIAL CONTRACTS 97
FOREIGN INVESTMENT IN THE ROC 98
EXCHANGE CONTROLS 99
TAXATION 99
DIVIDENDS AND PAYING AGENTS 103
STATEMENT BY EXPERTS 103
DOCUMENTS ON DISPLAY 103
SUBSIDIARY INFORMATION 104
Item 11.  Quantitative and Qualitative Disclosures about Market Risk 104
Item 12.  Description of Securities Other Than Equity Securities 106

 

  i

 

 

DEBT SECURITIES 106
WARRANTS AND RIGHTS 106
OTHER SECURITIES 106
AMERICAN DEPOSITARY SHARES 106
PART II 108
Item 13.  Defaults, Dividend Arrearages and Delinquencies 108
Item 14.  Material Modifications to the Rights of Security Holders and Use of Proceeds 108
Item 15.  Controls and Procedures 108
Item 16.  [Reserved] 110
Item 16A.  Audit Committee Financial Expert 110
Item 16B.  Code of Ethics 110
Item 16C.  Principal Accountant Fees and Services 110
Item 16D.  Exemptions from the Listing Standards for Audit Committees 111
Item 16E.  Purchases of Equity Securities by the Issuer and Affiliated Purchasers 111
Item 16F.  Change In Registrant’s Certifying Accountant 112
Item 16G.  Corporate Governance 112
Item 16H.  Mine Safety Disclosure 116
PART III 117
Item 17.  Financial Statements 117
Item 18.  Financial Statements 117
Item 19.  Exhibits 117

 

 

  ii

USE OF CERTAIN TERMS

 

Unless the context otherwise requires, references in this annual report to:

 

· “2014 Bonds” are to RMB150.0 million 3.125% Guaranteed Bonds due September 22, 2014, issued by Anstock Limited, our wholly owned subsidiary incorporated in the Cayman Islands;

 

· “2016 Bonds” are to RMB500.0 million 4.250% Guaranteed Bonds due September 20, 2016, issued by Anstock Limited;

 

· “2018 Convertible Bonds” are to US$400.0 million Zero Coupon Convertible Bonds due September 5, 2018, issued by the Company;

 

· “2018 NTD-linked Convertible Bonds” are to US$200.0 million NTD-linked Zero Coupon Convertible Bonds due March 27, 2018, issued by the Company;

 

· “ASE,” the “Company,” “ASE Group,” “ASE Inc.,” “we,” “us,” or “our” are to Advanced Semiconductor Engineering, Inc. and, unless the context requires otherwise, its subsidiaries;

 

· “ASEEE” are to ASE Embedded Electronics Inc., a company incorporated under the laws of the ROC;

 

· “ASE Chung Li” are to ASE (Chung Li) Inc., a company previously incorporated under the laws of the ROC that merged into ASE Inc. on August 1, 2004;

 

· “ASE Electronics” are to ASE Electronics Inc., a company incorporated under the laws of the ROC;

 

· “ASE Japan” are to ASE Japan Co. Ltd., a company incorporated under the laws of Japan;

 

· “ASE Korea” are to ASE (Korea) Inc., a company incorporated under the laws of the Republic of Korea;

 

· “ASE Material” are to ASE Material Inc., a company previously incorporated under the laws of the ROC that merged into ASE Inc. on August 1, 2004;

 

· “ASE Shanghai” are to ASE (Shanghai) Inc., a company incorporated under the laws of the PRC;

 

· “ASE Test” are to ASE Test Limited, a company incorporated under the laws of Singapore;

 

· “ASE Test Malaysia” are to ASE Electronics (M) Sdn. Bhd., a company incorporated under the laws of Malaysia;

 

· “ASE Test Taiwan” are to ASE Test, Inc., a company incorporated under the laws of the ROC;

 

· “ASEKS” are to ASE (KunShan) Inc., a company incorporated under the laws of the PRC;

 

· “ASEN” are to Suzhou ASEN Semiconductors Co., Ltd., a company incorporated under the laws of the PRC;

 

· “ASESH AT” are to ASE Assembly & Test (Shanghai) Limited, formerly known as Global Advanced Packaging Technology Limited, or GAPT, a company incorporated under the laws of the PRC;

 

· “ASEWH” are to ASE (Weihai), Inc., a company incorporated under the laws of the PRC;

 

· “Capital Increase” are to issuance of 130,000,000 common shares for public subscription, which was effected by way of an increase in the authorized share capital in the amount of NT$1,300.0 million of the Company in September 2013;

 

· “Corporate Bonds” are to NT$8.0 billion 1.450% secured corporate bonds with five year term issued in August 2011 by the Company;

 

  1

· “Deposit Agreement” are to deposit agreement dated September 29, 2000 among Citibank, N.A., as depositary, holders and beneficial owners of ADSs and us, which was filed as an exhibit to our registration statement on post-effective amendment No. 2 to Form F-6 on September 16, 2003, and its two amendments, which were filed as an exhibit to our registration statement on post-effective amendment No. 1 to Form F-6 on April 3, 2006 and our registration statement on post-effective amendment No. 2 to Form F-6 on October 25, 2006;

 

· “EEMS Test Singapore” are to EEMS Test Singapore Pte. Ltd., a company incorporated under the laws of Singapore, which changed its name to ASE Singapore II Pte. Ltd. and was subsequently merged into ASE Singapore Pte. Ltd. on January 1, 2011;

 

· “Exchange Act” are to the U.S. Securities Exchange Act of 1934, as amended;

 

· “FSC” are to the Financial Supervisory Commission of the Republic of China;

 

· “Green Bonds” are to US$300.0 million 2.125% Guaranteed Bonds due July 24, 2017, offered by Anstock II Limited, our wholly owned subsidiary incorporated in the Cayman Islands;

 

· “Hung Ching” are to Hung Ching Development & Construction Co. Ltd., a company incorporated under the laws of the ROC;

 

· “IFRS” are to International Financial Reporting Standards, International Accounting Standards and Interpretations as issued by the International Accounting Standards Board;

 

· “ISE Labs” are to ISE Labs, Inc., a corporation incorporated under the laws of the State of California;

 

· “Initial SPIL Tender Offer” are to ASE’s offer to purchase 779,000,000 common shares (including common shares represented by outstanding American depositary shares) of SPIL through concurrent tender offers in the ROC and the U.S., at a price of NT$45 per SPIL common share and NT$225 per SPIL American depositary share, commenced on August 24, 2015 and expired on September 22, 2015;

 

· “Korea” or “South Korea” are to the Republic of Korea;

 

· “Mainland Investors Regulations” are to the Regulations Governing Securities Investment and Futures Trading in Taiwan by Mainland Area Investors;

 

· “MOEAIC” are to Investment Commission, the ROC Ministry of Economic Affairs;

 

· “PowerASE” are to PowerASE Technology, Inc., a company incorporated under the laws of the ROC, which was merged into ASE Inc. in May 2012;

 

· “PRC” are to the People’s Republic of China and excludes Taiwan, Macau and Hong Kong;

 

· “PRC Regulations” are to the Regulations Governing Mainland China Investors’ Securities Investments and Futures Trading in Taiwan;

 

· “QDII” are to qualified domestic institutional investors;

 

· “Republic of China”, the “ROC” and “Taiwan” are to the Republic of China, including Taiwan and certain other possessions;

 

· “ROC GAAP” are to generally accepted accounting principles in the ROC;

 

· “SEC” are to the Securities and Exchange Commission of the U.S.;

 

· “Second SPIL Tender Offer” are to ASE’s offer to purchase 770,000,000 common shares (including common shares represented by outstanding American depositary shares) of SPIL through concurrent tender offers in the ROC and the U.S., at a price of NT$55 per SPIL common share and NT$275 per SPIL American depositary share, commenced on December 29, 2015 and expired on March 17, 2016 due to failure to obtain regulatory approval from the Taiwan Fair Trade Commission prior to the expiration of the Second SPIL Tender Offer;

 

  2

· “Securities Act” are to the U.S. Securities Act of 1933, as amended;

 

· “SiP” are to system-in-package;

 

· “SPIL” are to Siliconware Precision Industries Co., Ltd, and, unless the context requires otherwise, its subsidiaries;

 

· “Taiwan-IFRS” are to the Regulations Governing the Preparation of Financial Reports by Securities Issuers, the IFRS as well as related guidance translated by Accounting Research and Development Foundation and endorsed by the FSC;

 

· “Tessera” are to Tessera, Inc., a company that filed a suit against the Company and its U.S. subsidiary, ASE (U.S.) Inc.;

 

· “UGJQ” are to Universal Global Technology (Shanghai) Co., Ltd., a company incorporated under the laws of the PRC;

 

· “UGKS” are to Universal Global Technology (Kunshan) Co. Ltd., a company incorporated under the laws of the PRC;

 

· “UGTW” are to Universal Global Scientific Industrial Co. Ltd., a company incorporated under the laws of the ROC;

 

· “Universal Scientific” or “USI” are to Universal Scientific Industrial Co., Ltd., a company incorporated under the laws of the ROC;

 

· “Universal Scientific Shanghai” are to Universal Scientific Industrial (Shanghai) Co., Ltd., a company incorporated under the laws of the PRC;

 

· “U.S.” refers to United States of America;

 

· “U.S. GAAP” are to accounting principles generally accepted in the U.S.;

 

· “USI Inc.” are to USI Inc., a company incorporated under the laws of the ROC;

 

· “USI Mexico” are to Universal Scientific Industrial De Mexico S.A. DE C.V., a company incorporated under the laws of Mexico;

 

· “USISZ” are to Universal Electronics (Shenzhen) Co. Ltd., a company incorporated under the laws of the PRC; and

 

· “Wuxi Tongzhi” are to Wuxi Tongzhi Microelectronics Co., Ltd., a company incorporated under the laws of the PRC.

 

 

3

We publish our financial statements in New Taiwan dollars, the lawful currency of the ROC. In this annual report, references to “United States dollars,” “U.S. dollars” and “US$” are to the currency of the United States; references to “New Taiwan dollars,” “NT dollars” and “NT$” are to the currency of the ROC; references to “RMB” are to the currency of the PRC; references to “JP¥” are to the currency of Japan; references to “MYR” are to the currency of Malaysia; references to “SGD” are to the currency of Republic of Singapore; references to “KRW” are to the currency of Republic of Korea; and references to “EUR” are to the currency of the European Union. Unless otherwise noted, all translations from NT dollars to U.S. dollars were made at the exchange rate as set forth in the H.10 weekly statistical release of the Federal Reserve System of the United States (the “Federal Reserve Board”) as of December 31, 2015, which was NT$32.79=US$1.00, and all translations from RMB to U.S. dollars were made at the exchange rate as set forth in the H.10 weekly statistical release of the Federal Reserve Board as of December 31, 2015, which was RMB6.4778=US$1.00. All amounts translated into U.S. dollars in this annual report are provided solely for your convenience and no representation is made that the NT dollar, RMB or U.S. dollar amounts referred to herein could have been or could be converted into U.S. dollars or NT dollars/RMB, as the case may be, at any particular rate or at all. On April 22, 2016, the exchange rate between NT dollars and U.S. dollars as set forth in the H.10 weekly statistical release by the Federal Reserve Board was NT$32.36=US$1.00. On April 22, 2016, the exchange rate between RMB and U.S. dollars as set forth in the H.10 weekly statistical release by the Federal Reserve Board was RMB6.5004 =US$1.00.

 

4

SPECIAL NOTE REGARDING FORWARD-LOOKING STATEMENTS

 

This annual report on Form 20-F contains “forward-looking statements” within the meaning of Section 27A of the Securities Act and Section 21E of the Exchange Act. Although these forward-looking statements, which may include statements regarding our future results of operations, financial condition or business prospects, are based on our own information and information from other sources we believe to be reliable, you should not place undue reliance on these forward-looking statements, which apply only as of the date of this annual report. The words “anticipate,” “believe,” “estimate,” “expect,” “intend,” “plan” and similar expressions, as they relate to us, are intended to identify these forward-looking statements in this annual report. Our actual results of operations, financial condition or business prospects may differ materially from those expressed or implied in these forward-looking statements for a variety of reasons, including risks associated with cyclicality and market conditions in the semiconductor or electronics industry; changes in our regulatory environment, including our ability to comply with new or stricter environmental regulations and to resolve environmental liabilities; demand for the outsourced semiconductor packaging, testing and electronic manufacturing services we offer and for such outsourced services generally; the highly competitive semiconductor or manufacturing industry we are involved in; our ability to introduce new technologies in order to remain competitive; international business activities; our business strategy; our future expansion plans and capital expenditures; the uncertainties as to whether we can complete the acquisition of 100% of SPIL shares not otherwise owned by ASE; the strained relationship between the ROC and the PRC; general economic and political conditions; the recent global economic crisis; possible disruptions in commercial activities caused by natural or human-induced disasters; fluctuations in foreign currency exchange rates; and other factors. For a discussion of these risks and other factors, see “Item 3. Key Information—Risk Factors.”

 

5

PART I

 

Item 1. Identity of Directors, Senior Management and Advisers

 

Not applicable.

 

Item 2. Offer Statistics and Expected Timetable

 

Not applicable.

 

Item 3. Key Information

 

SELECTED FINANCIAL DATA

 

The selected consolidated statements of comprehensive income data and cash flow data for the years ended December 31, 2013, 2014 and 2015, and the selected consolidated balance sheet data as of December 31, 2014 and 2015 set forth below are derived from our audited consolidated financial statements included in this annual report and should be read in conjunction with, and are qualified in their entirety by reference to, these consolidated financial statements, including the notes thereto. The selected consolidated statements of comprehensive income data and cash flow data for the year ended December 31, 2012 and the selected consolidated balance sheet data as of December 31, 2012 and 2013 set forth below are derived from our audited consolidated financial statements not included herein.

 

Our consolidated financial statements have been prepared and presented in accordance with IFRS. Until and including our consolidated financial statements included in our annual report on Form 20-F for the year ended December 31, 2012, we prepared our consolidated financial statements in accordance with ROC GAAP with reconciliations to U.S. GAAP.

 

We adopted IFRS for certain filings with the SEC, starting from the filing of our annual report on Form 20-F for the year ended December 31, 2013. Historical financial results as of and for the year ended December 31, 2012 included herein have been adjusted and presented in accordance with IFRS, which differs from the results included in our annual report on Form 20-F for the year ended December 31, 2012. Meanwhile, as required by the FSC, we adopted Taiwan-IFRS for reporting of our annual and interim consolidated financial statements in the ROC beginning on January 1, 2013. Taiwan-IFRS differs from IFRS in certain respects, including, but not limited to the extent that any new or amended standards or interpretations applicable under IFRS may not be timely endorsed by the FSC. See “Item 3. Key Information—Risk Factors—Risks Relating to Our Business—Our adoption of new financial reporting standards, effective January 1, 2013, may have material impact on our financial statements thereafter” for more information.

 

Following our adoption of IFRS for SEC filing purposes, pursuant to the rule amendments adopted by the SEC that became effective on March 4, 2008, we were no longer required to reconcile our consolidated financial statements with U.S. GAAP. Historical selected financial data as of and for the year ended December 31, 2011 derived from our consolidated financial statements prepared in accordance with ROC GAAP have not been included below.

 

    As of and for the Year Ended December 31,
IFRS   2012   2013   2014   2015
    NT$   NT$   NT$   NT$   US$
    (in millions, except earnings per share and per ADS data)
Statement of Comprehensive Income Data:                    
Operating revenues     193,972.4       219,862.4       256,591.4       283,302.5       8,639.9  
Operating costs     (157,342.7 )     (177,040.4 )     (203,002.9 )     (233,167.3 )     (7,110.9 )
Gross profit     36,629.7       42,822.0       53,588.5       50,135.2       1,529.0  
Operating expenses     (18,922.6 )     (20,760.4 )     (23,942.7 )     (25,250.6 )     (770.1 )
Other operating income and expenses, net     83.2       (1,348.2 )     228.7       (251.5 )     (7.6 )
Profit from operations     17,790.3       20,713.4       29,874.5       24,633.1       751.3  
Non-operating income (expense), net     (1,181.6 )     (1,343.6 )     (1,339.4 )     660.1       20.1  

 

6

    As of and for the Year Ended December 31,
IFRS   2012   2013   2014   2015
    NT$   NT$   NT$   NT$   US$
    (in millions, except earnings per share and per ADS data)
Profit before income tax     16,608.7       19,369.8       28,535.1       25,293.2       771.4  
Income tax expense     (2,960.4 )     (3,499.6 )     (5,666.0 )     (4,311.1 )     (131.5 )
Profit for the year     13,648.3       15,870.2       22,869.1       20,982.1       639.9  
Attributable to                                        
Owners of the Company     13,191.6       15,404.5       22,228.6       20,013.5       610.4  
Non-controlling interests     456.7       465.7       640.5       968.6       29.5  
      13,648.3       15,870.2       22,869.1       20,982.1       639.9  
Other comprehensive income (loss), net of income tax     (3,830.7 )     3,233.3       5,504.4       (147.6 )     (4.5 )
Total comprehensive income for the year     9,817.6       19,103.5       28,373.5       20,834.5       635.4  
Attributable to                                        
Owners of the Company     9,420.4       18,509.6       27,394.3       19,940.4       608.1  
Non-controlling interests     397.2       593.9       979.2       894.1       27.3  
      9,817.6       19,103.5       28,373.5       20,834.5       635.4  
Earnings per common share (1) :                                        
Basic     1.77       2.05       2.89       2.62       0.08  
Diluted     1.73       1.99       2.79       2.51       0.08  
Dividends per common share (2)     2.05       1.05       1.29       2.00       0.06  
Earnings per equivalent ADS (1) :                                        
Basic     8.86       10.26       14.46       13.08       0.40  
Diluted     8.65       9.96       13.93       12.55       0.38  
Number of common shares (3) :                                        
Basic     7,445.5       7,508.5       7,687.9       7,652.8       7,652.8  
Diluted     7,568.2       7,747.6       8,220.7       8,250.1       8,250.1  
Number of equivalent ADSs                                        
Basic     1,489.1       1,501.7       1,537.6       1,530.6       1,530.6  
Diluted     1,513.6       1,549.5       1,644.1       1,650.0       1,650.0  
Balance Sheet Data:                                        
Current assets     97,495.6       132,176.5       159,955.2       156,732.8       4,779.9  
Investments - non-current (4)     2,267.8       2,345.5       2,409.3       38,328.0       1,168.9  
Property, plant and equipment, net     127,197.8       131,497.3       151,587.1       149,997.1       4,574.5  
Intangible assets     12,361.3       11,953.6       11,913.3       11,888.6       362.6  
Long-term prepayment for lease     4,164.1       4,072.3       2,586.0       2,556.2       77.9  
Others (5)     4,236.0       4,676.9       5,267.9       5,765.5       175.8  
Total assets     247,722.6       286,722.1       333,718.8       365,268.2       11,139.6  
Short-term debts (6)     36,884.9       44,618.2       41,176.0       36,983.4       1,127.9  
Current portion of long-term debts     3,213.8       6,016.5       2,835.5       16,843.3       513.7  
Long-term debts (7)     44,591.7       50,166.5       55,375.8       66,535.1       2,029.1  
Other liabilities (8)     53,211.8       60,176.9       78,640.1       78,700.1       2,400.1  
Total liabilities     137,902.2       160,978.1       178,027.4       199,061.9       6,070.8  
Share capital     76,047.7       78,180.3       78,715.2       79,185.7       2,414.9  
Non-controlling interests     3,505.7       4,128.4       8,209.9       11,492.5       350.5  
Equity attributable to owners of the Company     106,314.7       121,615.6       147,481.5       154,713.8       4,718.3  
Cash Flow Data:                                        
Capital expenditures     (39,029.5 )     (29,142.7 )     (39,599.0 )     (30,280.1 )     (923.5 )
Depreciation and amortization     23,435.9       25,470.9       26,350.8       29,518.7       900.2  
Net cash inflow from operating activities     33,038.0       41,296.0       45,863.5       57,548.3       1,755.1  
Net cash outflow from investing activities     (43,817.8 )     (29,925.8 )     (38,817.9 )     (63,351.4 )     (1,932.0 )
Net cash inflow (outflow) from financing activities     8,455.8       12,794.9       (2,797.0 )     8,636.3       263.4  

 

7

    As of and for the Year Ended December 31,
IFRS   2012   2013   2014   2015
    NT$   NT$   NT$   NT$   US$
    (in millions, except earnings per share and per ADS data)
Segment Data:                                        
Operating revenues:                                        
Packaging     104,298.3       112,603.9       121,336.5       116,607.3       3,556.2  
Testing     22,657.0       24,732.2       25,874.7       25,191.9       768.3  
Electronic manufacturing services     62,747.7       78,530.6       105,784.4       138,242.1       4,216.0  
Others     4,269.4       3,995.7       3,595.8       3,261.2       99.4  
Gross profit:                                        
Packaging     19,812.5       23,673.7       33,040.2       30,348.5       925.5  
Testing     7,601.0       9,079.4       9,632.0       9,025.7       275.3  
Electronic manufacturing services     7,241.3       8,054.3       9,118.9       9,433.4       287.7  
Others     1,974.9       2,014.6       1,797.4       1,327.6       40.5  

__________________

(1) The denominators for diluted earnings per common share and diluted earnings per equivalent ADS are calculated to account for the potential diluted factors, such as the exercise of options and conversion of our convertible bonds into our common shares.
(2) Dividends per common share issued as a cash dividend, a stock dividend and distribution from capital surplus.
(3) Represents the weighted average number of shares after retroactive adjustments to give effect to stock dividends. Common shares held by consolidated subsidiaries are classified as “treasury stock,” and are deducted from the number of common shares outstanding.
(4) Including available-for-sale financial assets — non-current and investments accounted for using the equity method.
(5) Including deferred tax assets, other financial assets — non-current and other non-current assets.
(6) Including short-term bank loans and short-term bills payable.
(7) Including bonds payable, long-term borrowings (consisted of bank loans and bills payable) and capital lease obligations.
(8) Including (x) current liabilities other than short-term debts and current portion of long-term debts and (y) non-current liabilities other than long-term debts.

 

Exchange Rates

 

Fluctuations in the exchange rate between NT dollars and U.S. dollars will affect the U.S. dollar equivalent of the NT dollar price of our common shares on the Taiwan Stock Exchange and, as a result, will likely affect the market price of the ADSs. Fluctuations will also affect the U.S. dollar conversion by the depositary under our ADS deposit agreement referred to below of cash dividends paid in NT dollars on, and the NT dollar proceeds received by the depositary from any sale of, common shares represented by ADSs, in each case, according to the terms of the deposit agreement dated September 29, 2000 and as amended and supplemented from time to time among us, Citibank N.A., as depositary, and the holders and beneficial owners from time to time of the ADSs, which we refer to as the deposit agreement.

 

The following table sets forth, for the periods indicated, information concerning the number of NT dollars for which one U.S. dollar could be exchanged. The exchange rates reflect the exchange rates set forth in the H.10 statistical release of the Federal Reserve Board.

 

    Exchange Rate
   

Average (1)

  High   Low   Period End
2011     29.42       30.67       28.50       30.27  
2012     29.47       30.28       28.96       29.05  
2013     29.73       30.20       28.93       29.83  
2014     30.38       31.80       29.85       31.60  
2015     31.80       33.17       30.37       32.79  
October     32.44       32.81       31.92       32.46  
November     32.61       32.87       32.43       32.53  
December     32.79       33.01       32.53       32.79  
2016                                
January     33.43       33.74       33.14       33.43  
February     33.24       33.51       32.95       33.22  
March     32.59       33.09       32.16       32.18  
April (through April 22, 2016)     32.33       32.44       32.11       32.36  

_________________

(1) Annual averages were calculated by using the average of the exchange rates on the last day of each month during the relevant year. Monthly averages were calculated by using the average of the daily rates during the relevant month.

 

On April 22, 2016, the exchange rate as set forth in the H.10 weekly statistical release by the Federal Reserve Board was NT$32.36=US$1.00.

 

8

CAPITALIZATION AND INDEBTEDNESS

 

Not applicable.

 

REASON FOR THE OFFER AND USE OF PROCEEDS

 

Not applicable.

 

RISK FACTORS

 

Risks Relating to Our Business

 

Since we are dependent on the highly cyclical semiconductor and electronics industries and conditions in the markets for the end-use applications of our products, our revenues and net income may fluctuate significantly.

 

Our business is affected by market conditions in the highly cyclical semiconductor and electronics industries. Most of our customers operate in this industry, and variations in order levels from our customers and service fee rates may result in volatility in our revenues and net income. From time to time, the semiconductor and electronics industries have experienced significant, and sometimes prolonged, downturns. As our business is, and will continue to be, dependent on the requirements for independent packaging, testing and electronic manufacturing services, any future downturn in the industry would reduce demand for our services. For example, in the fourth quarter of 2008, the global economic crisis resulted in a significant deterioration in demand for our customers’ products, which in turn affected demand for our services and adversely affected our operating results. Although demand has recovered, we expect there to be continued downward pressure on our average selling prices and continued volatility with respect to our sales volumes in the future. If we cannot reduce our costs or adjust our product mix to sufficiently offset any decline in sales volumes, our profitability will suffer, and we may incur losses.

 

Market conditions in the semiconductor and electronics industries depend to a large degree on conditions in the markets for the end-use applications of various products, such as communications, computing and consumer electronics products. Any deterioration of conditions in the markets for the end-use applications would reduce demand for our services, and would likely have a material adverse effect on our financial condition and results of operations. In 2015, approximately 54.7%, 11.1% and 34.2% of our operating revenues from packaging and testing were attributed to the packaging and testing of semiconductors used in communications, computing and consumer electronics/industrial/automotive/other applications, respectively. In the same year, approximately 53.2%, 14.3%, 18.7%, 8.1% and 4.9% of our operating revenues from electronic manufacturing services were attributed to the communications, computing, consumer electronics applications, industrial and automotive applications, respectively. Across end-use applications, our customers face intense competition and significant shifts in demand, which could put pricing pressure on our services and may adversely affect our revenues and net income.

 

A reversal or slowdown in the outsourcing trend for semiconductor packaging and testing services and electronic manufacturing services could adversely affect our growth prospects and profitability.

 

Semiconductor manufacturers that have their own in-house packaging and testing capabilities, known as integrated device manufacturers and original equipment manufacturers, have increasingly outsourced stages of the production process, including packaging, testing, electronic manufacturing and assembly, to independent companies in order to reduce costs, eliminate product complexity and meet fast-to-market requirements. In addition, the availability of advanced independent semiconductor manufacturing services has also enabled the growth of so-called “fabless” semiconductor companies that focus exclusively on design and marketing and outsource their manufacturing, packaging and testing requirements to independent companies. We cannot assure you that these manufacturers and companies will continue to outsource their packaging, testing and manufacturing requirements to third parties like us. Furthermore, during an economic downturn, these integrated device manufacturers typically rely more on their own in-house packaging and testing capabilities, therefore decreasing their need to outsource. A reversal of, or a slowdown in, this outsourcing trend could result in reduced demand for our services and adversely affect our growth prospects and profitability.

 

9

Any global economic downturn could adversely affect the demand for our products and services, and a protracted global economic crisis would have a material adverse effect on us.

 

The global financial markets experienced significant disruptions in 2008 and the United States, Europe and other economies went into recession. The recovery from the lows of 2008 and 2009 was uneven and it is facing new challenges, including a European sovereign debt crisis that began in 2011 and continuing high unemployment rates in much of the world. It is unclear what the long-term impact of the European sovereign debt crisis will be and uncertainty remains over the long-term effects of the expansionary monetary and fiscal policies that have been adopted by the central banks and financial authorities of some of the world’s leading economies. Any economic downturn or crisis may cause our customers to do the following:

 

· cancel or reduce planned expenditures for our products and services;

 

· seek to lower their costs by renegotiating their contracts with us;

 

· consolidate the number of suppliers they use, which may result in our loss of customers; and

 

· switch to lower-priced products or services provided by our competitors.

 

Any uncertainty or significant volatility in global economic conditions may also make it difficult for our customers to accurately forecast and plan future business activities and may have a material adverse effect on us.

 

If we are unable to compete favorably in the highly competitive markets of semiconductor packaging and testing and electronic manufacturing services, our revenues and net income may decrease.

 

The markets of semiconductor packaging and testing and electronic manufacturing services are very competitive. We face competition from a number of sources, including other independent semiconductor packaging and testing companies, integrated device manufacturers, and other electronic manufacturing services providers with large-scale manufacturing capabilities who can quickly react to market changes. We believe that the principal competitive factors in our industry are:

 

· technological expertise;

 

· the ability to provide total solutions to our customers, including integrated design, manufacturing, packaging and testing and electronic manufacturing services;

 

· ability to offer interconnect technologies at an optimal scale for our businesses;

 

· range of package types and testing platforms available;

 

· the ability to work closely with our customers at the product development stage;

 

· responsiveness and flexibility;

 

· fast-to-market product development;

 

· capacity;

 

· diversity in facility locations;

 

· production yield; and

 

10

· price.

 

We face increasing competition, as most of our customers obtain services from more than one source. Rapid technological advances and aggressive pricing strategies by our competitors may continue to increase competition. Our ability to compete depends on factors both within and outside of our control and may be constrained by the distinct characteristics and production requirements of individual products. We cannot assure you that we will be able to continue to improve production efficiency and maintain reasonable profit for all of our products.

 

In addition, some of our competitors may have superior financial, marketing, manufacturing, research and development and technological resources than we do. For example, the central government of the PRC as well as provincial and municipal governments have provided various incentives to domestic companies in the semiconductor industry, including major semiconductor testing and packaging providers such as Jiangsu Changjiang Electronics Technology Co., Ltd. Similarly, our customers may face competition from their competitors in the PRC, and such competitors may also receive significant subsidies from the PRC government. As we are downstream suppliers, the impact of such government policies on competition and price pressure of our customers may negatively impact our own business. Increasing competition may lead to declines in product prices and profitability and could have a material adverse effect on our business, financial condition, results of operations and future prospects.

 

Our profitability depends on our ability to respond to rapid technological changes in the semiconductor industry.

 

The semiconductor industry is characterized by rapid increases in the diversity and complexity of semiconductors. As a result, we expect that we will need to constantly offer more sophisticated packaging and testing technologies and processes in order to respond to competitive industry conditions and customer requirements. We have successfully combined our packaging, testing and materials technologies with the expertise of electronic manufacturing services at the systems level to develop our SiP business. Success of a new product depends on a number of factors such as product acceptance by the market. New products are developed in anticipation of future demand. We cannot assure you that the launch of any new product will be successful, or that we will be able to produce sufficient quantities of these products to meet market demand. If we fail to develop, or obtain access to, advances in packaging or testing technologies or processes, we may become less competitive and less profitable. In addition, advances in technology typically lead to declining average selling prices for semiconductors packaged or tested with older technologies or processes. As a result, if we cannot reduce the costs associated with our services, the profitability of a given service and our overall profitability may decrease over time.

 

Our operating results are subject to significant fluctuations, which could adversely affect the market value of your investment.

 

Our operating results have varied significantly from period to period and may continue to vary in the future. Downward fluctuations in our operating results may result in decreases in the market price of our common shares and the ADSs. Among the more important factors affecting our quarterly and annual operating results are the following:

 

· changes in general economic and business conditions, particularly the cyclical nature of the semiconductor and electronics industries and the markets served by our customers;

 

· our ability to quickly adjust to unanticipated declines or shortfalls in demand and market prices;

 

· changes in prices for our products or services;

 

· volume of orders relative to our packaging, testing and manufacturing capacity;

 

· changes in costs and availability of raw materials, equipment and labor;

 

· our ability to obtain or develop substitute raw materials with lower cost;

 

· our ability to successfully develop or market new products or services;

 

11

· our ability to successfully manage product mix in response to changes in market demand and differences in margin associated with different products;

 

· timing of capital expenditures in anticipation of future orders;

 

· our ability to acquire or design and produce cost-competitive interconnect materials, and provide integrated solutions for electronic manufacturing services;

 

· fluctuations in the exchange rate between the NT dollar or RMB and foreign currencies, especially the U.S. dollar; and

 

· typhoons, earthquakes, drought, epidemics, tsunami and other natural disasters, as well as industrial and other incidents such as fires and power outages.

 

Due to the factors listed above, our future operating results or growth rates may be below the expectations of research analysts and investors. If so, the market price of our common shares and the ADSs, and thus the market value of your investment, may fall.

 

Due to our high percentage of fixed costs, we may be unable to maintain our gross margin at past levels if we are unable to achieve relatively high capacity utilization rates.

 

Our operations, in particular our testing operations, are characterized by relatively high fixed costs. We expect to continue to incur substantial depreciation and other expenses in connection with our acquisitions of equipment and facilities. Our profitability depends not only on the pricing levels for our services or products, but also on utilization rates for our machinery and equipment, commonly referred to as “capacity utilization rates.” In particular, increases or decreases in our capacity utilization rates can significantly affect gross margins since the unit cost generally decreases as fixed costs are allocated over a larger number of units. In periods of low demand, we experience relatively low capacity utilization rates in our operations, which leads to reduced margins. For example, in the fourth quarter of 2008, we experienced lower than anticipated utilization rates in our operations due to a significant decline in worldwide demand for our packaging and testing services, which resulted in reduced margins during that period. Although capacity utilization rates have recovered since 2009, we cannot assure you that we will be able to maintain or surpass our past gross margin levels if we cannot consistently achieve or maintain relatively high capacity utilization rates.

 

If we are unable to manage our expansion or investments effectively, our growth prospects may be limited and our future profitability and core business operations may be adversely affected.

 

We have significantly expanded our operations through both organic growth and acquisitions in recent years. For example, we acquired the controlling interest of Universal Scientific in 2010 to expand our product offering scope to electronic manufacturing services; we also entered into a joint venture agreement with TDK Corporation in May 2015 to further expand our business in embedded substrates. We expect that we will continue to expand our operations in the future. The purpose of our expansion is mainly to provide total solutions to existing customers or to attract new customers and broaden our product range for a variety of end-use applications. However, rapid expansion may place a strain on our managerial, technical, financial, operational and other resources. As a result of our expansion, we have implemented and will continue to implement additional operational and financial controls and hire and train additional personnel. Any failure to manage our growth effectively could lead to inefficiencies and redundancies and result in reduced growth prospects and profitability.

 

In addition, we have recently made investments in real estate development businesses mostly in China. The PRC property market is volatile and may experience undersupply or oversupply and property price fluctuations. The central and local governments frequently adjust monetary and other fiscal policies to prevent and curtail the overheating of the economy. Such policies may lead to changes in market conditions, including price instability and imbalance of supply and demand in respect of office, residential, retail, entertainment, cultural and intellectual properties. We may continue to make investments in this area in the future and our diversification in this industry may put pressure on our managerial, financial, operational and other resources. Our exposure to risks related to real estate development may also increase over time as a result of our expansion into such a business. There can be no assurance that our investments in such a business will yield the anticipated returns and that our expansion into such a business, including the resulting diversion of management’s attention, will not adversely affect our core business operations.

 

12

We may not be successful in pursuing mergers and acquisitions. Any mergers or acquisitions we make may lead to a diversion of management resources.

 

Our future success may depend on acquiring businesses and technologies, making investments or forming joint ventures that complement, enhance or expand our current product offerings or otherwise offer us growth opportunities. In pursuing such acquisitions, we may face competition from other companies in the semiconductor industry. Our ability to acquire or invest in suitable targets may be limited by applicable laws and regulations in Taiwan, the United States and other jurisdictions where we do business. Even if we are successful in making such acquisitions or investments, we may have to expend substantial amounts of cash, incur debt, assume loss-making divisions and incur other types of expenses. We may also face challenges in successfully integrating any acquired companies into our existing organization or in creating the anticipated cost synergies. Each of these risks could have a material adverse effect on our business, financial condition and results of operations.

 

The financial performance of our equity method investments could adversely affect our results of operations.

 

As part of our business strategy, we have and may continue to pursue acquisitions of businesses and assets, strategic alliances and joint ventures. We currently have equity investments in certain entities and the accounting treatment applied for these investments varies depending on a number of factors, including, but not limited to, our percentage ownership and the level of influence or control we have over the relevant entity. Any losses experienced by these entities could adversely affect our results of operations and the value of our investment. In addition, if these entities were to fail and cease operations, we may lose the entire value of our investment and the stream of any shared profits.

 

For example, on September 22, 2015, upon the expiration of the Initial SPIL Tender Offer period, we acquired 779,000,000 common shares (including those represented by American depositary shares) of SPIL through the Initial SPIL Tender Offer. We subsequently acquired an additional 258,300,000 common shares of SPIL (including those represented by American depositary shares) through open market purchases in March and April 2016. As of April 28, 2016, we beneficially own 1,037,300,000 common shares of SPIL (calculated as the sum of 935,596,800 common shares of SPIL and 101,703,200 common shares of SPIL underlying 20,340,640 American depositary shares of SPIL), representing 33.29% of the issued and outstanding share capital of SPIL (calculated based on 3,116,361,139 common shares of SPIL (including those represented by American depositary shares) outstanding as of March 31, 2016 as reported in SPIL’s annual report on Form 20-F for the year ended December 31, 2015). See “Item 4. Information on the Company— History and Development of the Company—Acquisition of Common Shares and American Depositary Shares of SPIL.” Although we are currently a 33.29% shareholder of SPIL, we currently do not control SPIL and do not have the power to direct SPIL or its management. As the investment in SPIL is accounted for by the equity method, to the extent that SPIL has net losses, our financial results will be adversely affected to the extent of our pro rata portion of these losses. In addition, as we currently do not control SPIL and do not have the power to direct SPIL or its management, we do not have access to SPIL’s books and records and may not be able to obtain SPIL’s financial information on a timely basis. SPIL’s reporting time for its financial statements may affect our ability to timely report our own financial statements or meet scheduled announcements for earnings releases.

 

There can be no assurance that we will be able to maintain or enhance the value or performance of our investee companies, including SPIL, or that we will achieve the returns or benefits sought from such investments. If our interests differ from those of other investors in our investee companies, we may not be able to enjoy synergies with the investee and it may adversely affect our financial results or financial condition.

 

We may not be successful in our acquisition of 100% of SPIL shares not otherwise owned by us.

 

On September 22, 2015, upon the expiration of the Initial SPIL Tender Offer period, we acquired 779,000,000 common shares (including those represented by American depositary shares) of SPIL through the Initial SPIL Tender Offer. In December 2015, following an announcement by SPIL that it plans to issue 1,033 million shares, if approved by SPIL shareholders, to a third party pursuant to a share placement agreement, we submitted a written proposal to SPIL’s Board proposing to acquire all SPIL shares not otherwise owned by ASE, contingent upon the termination of the share purchase agreement, and later launched the Second SPIL Tender Offer on December 29, 2015 to offer to purchase up to 770,000,000 common shares of SPIL (including those represented by American depositary shares). On March 17, 2016, we announced that the Second SPIL Tender Offer was unsuccessful because the Taiwan Fair Trade Commission (the “TFTC”) did not render its decision before the expiration of the Second SPIL Tender Offer. The TFTC subsequently suspended its review on March 23, 2016. Notwithstanding the failure of the Second SPIL Tender Offer, we announced that we will continue to seek to obtain control of SPIL, with the purpose of effecting an acquisition of 100% of the common shares and American depositary shares of SPIL not owned by us (“SPIL Merger”). See “Item 4. Information on the Company— History and Development of the Company—Acquisition of Common Shares and American Depositary Shares of SPIL.”

 

13

The successful consummation of the SPIL Merger is subject to a number of factors, including, among other things, obtaining all necessary antitrust or other regulatory approvals in Taiwan, the United States and other jurisdictions where we do business. In the event these conditions cannot be satisfied, we may re-evaluate our interest in SPIL and may consider, among other legally permissible alternatives, to dispose our SPIL shares at a loss, which may significantly affect our financial position. In addition, the interest we acquired in SPIL from the Initial SPIL Tender Offer is currently being reviewed by the ROC court. See “Item 8. Financial Information—Consolidated Statements and Other Financial Information—Legal Proceedings” for more information. If a dismissal is not granted or a settlement is not reached, such a lawsuit could result in substantial costs to ASE and divert management’s attention and resources, which may cause a material adverse effect on our results of operations, financial condition and business. We are also unable to quantify the harm to our reputation should any adverse findings be made against us. If our interest in SPIL from the Initial Tender Offer is voided by ROC courts, we may not realize the anticipated synergies, cost savings and benefits and growth opportunities that would otherwise have resulted from our acquisition of 779,000,000 common shares of SPIL.

 

Notwithstanding the above, even if we are successful in consummating the SPIL Merger, we may face challenges in successfully integrating SPIL into our existing organization or in realizing anticipated benefits and cost synergies. Each of these risks could have a material adverse effect on our business and operations, including our relationship with customers, suppliers, employees and other constituencies, or otherwise adversely affect our financial condition and results of operations.

 

There may be risks associated with the proposed holding company structure.

 

We announced in March 2016 that upon the successful completion of the SPIL Merger, we plan to establish a holding company in Taiwan that will hold 100% of the equity interests in both ASE and SPIL such that ASE and SPIL will be wholly owned subsidiaries of such holding company. The proposed holding company will maintain all current operations of ASE and SPIL in Taiwan. The implementation of such corporate structure restructuring plan may require approvals from relevant regulators and may result in unforeseen contingent risks, including increase in tax liabilities or trading discounts relating to a holding company discount that may become apparent in the future.

 

The packaging and testing businesses are capital intensive. If we cannot obtain additional capital when we need it, our growth prospects and future profitability may be adversely affected.

 

The packaging and testing business is capital intensive. We will need capital to fund the expansion of our facilities as well as fund our research and development activities in order to remain competitive. We believe that our existing cash, marketable securities, expected cash flow from operations and existing credit lines under our loan facilities will be sufficient to meet our capital expenditures, working capital, cash obligations under our existing debt and lease arrangements, and other requirements for at least the next twelve months. However, future capacity expansions or market or other developments may cause us to require additional funds. Our ability to obtain external financing in the future is subject to a variety of uncertainties, including:

 

· our future financial condition, results of operations and cash flows;

 

· general market conditions for financing activities by semiconductor or electronics companies; and

 

· economic, political and other conditions in Taiwan and elsewhere.

 

If we are unable to obtain funding in a timely manner or on acceptable terms, our results of operations and financial conditions may be materially and adversely affected.

 

14

Restrictive covenants and broad default provisions in our existing debt agreements may materially restrict our operations as well as adversely affect our liquidity, financial condition and results of operations.

 

We are a party to numerous loans and other agreements relating to the incurrence of debt, many of which include restrictive covenants and broad default provisions. In general, covenants in the agreements governing our existing debt, and debt we may incur in the future, may materially restrict our operations, including our ability to incur debt, pay dividends, make certain investments and payments, other than in connection with restructurings of consolidated entities, and encumber or dispose of assets. In addition, any global economic deterioration or ineffective expansion may cause us to incur significant net losses or force us to assume considerable liabilities. We cannot assure you that we will be able to remain in compliance with our financial covenants, which, as a result, may lead to a default. This may thereby restrict our ability to access unutilized credit facilities or the global capital markets to meet our liquidity needs. Furthermore, a default under one agreement by us or one of our subsidiaries may also trigger cross-defaults under our other agreements. In the event of default, we may not be able to cure the default or obtain a waiver on a timely basis. An event of default under any agreement timely governing our existing or future debt, if not cured or waived, could have a material adverse effect on our liquidity, financial condition and results of operations.

 

We have on occasion failed to comply with certain financial covenants in some of our loan agreements. Such non-compliance may also have, through broadly worded cross-default provisions, resulted in default under some of the agreements governing our other existing debt. For example, we failed to comply with certain financial covenants in some of our loan agreements as a result of our acquisition of the controlling interest of Universal Scientific in February 2010, for which we have timely obtained waivers from our counterparties. If we are unable to timely remedy any of our non-compliance under such loan agreements or obtain applicable waivers or amendments, we would breach our financial covenants and our financial condition would be adversely affected. As of December 31, 2015, we were not in breach of any of the financial covenants under our existing loan agreements, although we cannot provide any assurance that we will not breach any of such financial covenants in the future.

 

We depend on select personnel and could be affected by the loss of their services.

 

We depend on the continued service of our executive officers and skilled technical personnel. Our business could suffer if we lose the services of any of these personnel and cannot adequately replace them. Although some of these management personnel have entered into employment agreements with us, they may nevertheless leave before the expiration of these agreements. We are not insured against the loss of the services of any of our personnel. In addition, these proceedings may divert these and other employees’ attention from our business operations.

 

In addition, we may be required to increase substantially the number of these employees in connection with our expansion plans, and there is intense competition for their services in this industry. We may not be able to either retain our present personnel or attract additional qualified personnel as and when needed. In addition, we may need to increase employee compensation levels in order to attract and retain our existing officers and employees and the additional personnel that we expect to require. Furthermore, a portion of the workforce at our facilities in Taiwan are foreign workers employed by us under work permits, which are subject to government regulations on renewal and other terms. Consequently, our business could also suffer if the Taiwan regulations relating to the employment of foreign workers were to become significantly more restrictive or if we are otherwise unable to attract or retain these workers at a reasonable cost.

 

If we are unable to obtain additional packaging and testing equipment or facilities in a timely manner and at a reasonable cost, our competitiveness and future profitability may be adversely affected.

 

The semiconductor packaging and testing businesses are capital intensive and require significant investment in expensive equipment manufactured by a limited number of suppliers. The market for semiconductor packaging and testing equipment is characterized, from time to time, by intense demand, limited supply and long delivery cycles. Our operations and expansion plans depend on our ability to obtain a significant amount of such equipment from a limited number of suppliers. From time to time we have also leased certain equipment. We have no binding supply agreements with any of our suppliers and acquire our packaging and testing equipment on a purchase order basis, which exposes us to changing market conditions and other substantial risks. For example, shortages of capital equipment could result in an increase in the price of equipment and longer delivery times. Semiconductor packaging and testing also require us to operate sizeable facilities. If we are unable to obtain equipment or facilities in a timely manner, we may be unable to fulfill our customers’ orders, which could adversely affect our growth prospects as well as financial condition and results of operations. See “Item 4. Information on the Company—Business Overview—Equipment.”

 

15

Fluctuations in exchange rates could result in foreign exchange losses.

 

Currently, the majority of our revenues are denominated in U.S. dollars, with a portion denominated in NT dollars and Japanese yen. Our operating costs and operating expenses, on the other hand, are incurred in several currencies, primarily NT dollars, U.S. dollars, RMB, Japanese yen, Korean won, as well as, to a lesser extent, Singapore dollars and Malaysian ringgit. In addition, a substantial portion of our capital expenditures, primarily for the purchase of packaging and testing equipment, has been, and is expected to continue to be, denominated in U.S. dollars, with the remainder in Japanese yen. Fluctuations in exchange rates, primarily among the U.S. dollar against the NT dollar, the Japanese yen and RMB, will affect our costs and operating margins. In addition, these fluctuations could result in exchange losses and increased costs in NT dollar and other local currency terms. Despite hedging and mitigating techniques implemented by us, fluctuations in exchange rates have affected, and may continue to affect, our financial condition and results of operations. We recognized net foreign exchange losses of NT$276.2 million, NT$1,222.0 million and NT$713.2 million (US$21.8 million) in 2013, 2014 and 2015, respectively. We cannot assure you that we will achieve foreign exchange gains in the future. See “Item 11. Quantitative and Qualitative Disclosures about Market Risk—Market Risk—Foreign Currency Exchange Rate Risk.”

 

The loss of a large customer or disruption of our strategic alliance or other commercial arrangements with semiconductor foundries and providers of other complementary semiconductor manufacturing services may result in a decline in our revenues and profitability.

 

Although we have a large customer base, we have derived and expect to continue to derive a large portion of our revenues from a small group of customers during any particular period due in part to the concentration of market share in the semiconductor and electronics industries. Our five largest customers together accounted for approximately 37.2%, 40.3% and 48.2% of our operating revenues in 2013, 2014 and 2015, respectively. One customer accounted for more than 10.0% of our operating revenues in 2013, 2014 and 2015. The demand for our services from a customer is directly dependent upon that customer’s level of business activity, which could vary significantly from year to year. Our key customers typically operate in the cyclical semiconductor and electronic business and, in the past, have varied, and may vary in the future, order levels significantly from period to period. Some of these companies are relatively small, have limited operating histories and financial resources, and are highly exposed to the cyclicality of the industry. We cannot assure you that these customers or any other customers will continue to place orders with us in the future at the same levels as in past periods. The loss of one or more of our significant customers, or reduced orders by any one of them, and our inability to replace these customers or make up for such orders, could adversely affect our revenues and profitability. In addition, we have in the past reduced, and may in the future be requested to reduce, our prices to limit the level of order cancellations. Any price reduction would likely reduce our margins and profitability.

 

Since 1997, we have maintained a strategic alliance with Taiwan Semiconductor Manufacturing Company Limited, or TSMC, one of the world’s largest dedicated semiconductor foundries. TSMC designates us as their non-exclusive preferred provider of packaging and testing services for semiconductors manufactured by TSMC. In addition, we entered into a joint venture agreement with TDK Corporation in May 2015 to further expand our business in embedded substrates. Such strategic alliances, as well as our other commercial arrangements with providers of other complementary semiconductor manufacturing services, enable us to offer total semiconductor manufacturing solutions to our customers. These strategic alliances and other commercial arrangements may not achieve their anticipated commercial benefits and may be terminated at any time. Any failure in successfully maintaining such alliances, any termination of such alliances or our failure to enter into substantially similar strategic alliances or commercial arrangements may adversely affect our competitiveness and our revenues and profitability.

 

We rely on a limited number of key customers in certain products for our revenues, and our results of operations may be adversely affected by a reduction of business from our key customers.

 

Our results of operations also depends on the performance and business of our key customers. Accordingly, risks that could seriously harm our key customers could harm us as well, including:

 

16

loss of market share for our key customers’ products;

 

recession in our key customers’ markets;

 

failure of their products to gain wide-spread commercial acceptance; and

 

our key customers’ inability to manage their operations efficiently and effectively.

 

The launch and market acceptance of our individual key customers’ products could significantly impact our product and customer mix, resulting in significant volatility in the demand for the solutions we offer and our results of operations. It is also possible that a key customer’s market share with respect to its product may decline as its competitors introduce new products, which could adversely affect our results of operations, particularly if we are unable to sell our solutions to such competitors. Furthermore, sales of our key customers’ products are subject to seasonal fluctuation.

 

Our revenues and profitability may decline if we are unable to obtain adequate supplies of raw materials in a timely manner and at a reasonable price.

 

Our operations, such as packaging operations, substrate operations and electronic manufacturing services, require that we obtain adequate supplies of raw materials on a timely basis. Shortages in the supply of raw materials have in the past resulted in occasional price increases and delivery delays. In addition, the operations of some of our suppliers are vulnerable to natural disasters, such as earthquakes and typhoons, the occurrences of which may deteriorate and prolong the shortage or increase the uncertainty of the supply of raw materials. For example, on March 11, 2011, a major earthquake occurred off the coast of Japan resulting in a large tsunami and radiation leak at the Fukushima nuclear power plant. We experienced a disruption to the supply of raw materials from Japan for about three to four weeks due to the fear of radiation contamination and the reduction or postponement in production by some of our Japanese suppliers. Although the purchase of supplies from Japan has been restored to the previous level, we cannot assure you that we will not suffer long-term from the impact of the earthquake and the tsunami. In addition, further earthquakes, aftershocks thereof or other disasters in Japan or other regions in which we operate may cause a decline in our sales. Any of the above events or developments may have a material adverse effect on our business, results of operations and financial condition.

 

Raw materials such as IC substrates are prone to supply shortages since such materials are produced by a limited number of suppliers such as Nanya Printed Circuit Board Corporation, LG Innotek Co., Ltd., Kinsus Interconnect Technology Corporation and Unimicron Technology Corp. Our operations conducted through our wholly owned subsidiaries ASE Electronics and ASE Shanghai have improved our ability to obtain IC substrates on a timely basis and at a reasonable cost. In 2015, our interconnect materials operations supplied approximately 27.2% of our consolidated substrate requirements by value. We do not expect that our internal interconnect materials operations will be able to meet all of our interconnect materials requirements. Consequently, we will remain dependent on market supply and demand for our raw materials. In addition, recent fluctuations in prices of precious metals, such as gold, have also affected the price at which we have been able to purchase the principal raw materials we use in our packaging processes. We cannot guarantee that we will not experience shortages in the near future or that we will be able to obtain adequate supplies of raw materials in a timely manner or at a reasonable price. Our revenues and net income could decline if we are unable to obtain adequate supplies of high quality raw materials in a timely manner or if there are significant increases in the costs of raw materials that we cannot pass on to our customers.

 

Regulations related to conflict minerals could adversely affect our business, financial condition and results of operations.

 

The Dodd-Frank Wall Street Reform and Consumer Protection Act contains provisions to improve transparency and accountability concerning the supply of certain minerals, known as conflict minerals, which are defined as cassiterite, columbite-tantalite, gold, wolframite or their derivatives and other minerals determined by the U.S. government to be financing conflict in the Democratic Republic of Congo and adjoining countries. As a result, in August 2012 the SEC adopted annual disclosure and reporting requirements for those companies who use conflict minerals in their products. These rules require companies that manufacture or contract to manufacture products for which conflict minerals are necessary to the functionality or production to begin scrutinizing the origin of conflict minerals in their products starting from January 1, 2013, and file a new form, Form SD, containing the conflict minerals disclosure by May 31 for the prior calendar year, beginning May 31, 2014. We filed a specialized disclosure report on Form SD for the years ended December 31, 2013 and 2014 on May 30, 2014 and June 1, 2015, respectively. Pursuant to the SEC rules governing conflict minerals disclosures, we have engaged an independent auditing firm to conduct audits on our due diligence framework to provide a private sector report for our specialized disclosure report on Form SD for the years ended December 31, 2014 and 2015. As a result, there will be costs associated with complying with these disclosure requirements, including costs for diligence to determine the sources of conflict minerals used in our products and other potential changes to products, processes or sources of supply as a consequence of such verification activities. The implementation of these rules could adversely affect the sourcing, supply and pricing of materials used in our products. As there may be only a limited number of suppliers offering “conflict free” minerals, we cannot be sure that we will be able to obtain necessary “conflict free” minerals from such suppliers in sufficient quantities or at competitive prices. Also, we may face adverse effects to our reputation if we determine that certain of our products contain minerals not determined to be conflict free or if we are unable to sufficiently verify the origins for all conflict minerals used in our products through the procedures we may implement.

 

17

System security risks, data protection breaches or unexpected system outage or failures could harm our business, financial condition and results of operations.

 

We rely on the efficient and uninterrupted operation of complex information technology applications, systems and networks to operate our business. Our systems are vulnerable to damage or interruption from earthquakes, terrorist attacks, floods, fires, power loss, telecommunications failures, cyber-attacks, computer viruses, computer denial of service attacks or other attempts to harm our system, and similar events. In recent years, the risks that we face from cyber-attacks have increased significantly. Some of these attacks may originate from well-organized, highly skilled organizations. Although there have not been reported major cyber-attacks against our systems in the recent years, any such attack or system or network disruption could result in a loss of our intellectual property, the release of commercially sensitive information, customer or employee personal data. Failures to protect the privacy of customer and employee confidential data against breaches of network security could result in damage to our reputation. 

 

Furthermore, some of our data centers are located in areas with a high risk of major earthquakes. Our data centers are also subject to break-ins, sabotage and intentional acts of vandalism, and to potential disruptions if the operators of these facilities have financial difficulties. Some of our systems are not fully redundant, and our disaster recovery planning cannot account for all eventualities. The occurrence of a natural disaster, a decision to close a facility we are using without adequate notice for financial reasons or other unanticipated problems at our data centers could result in loss of production capabilities and lengthy interruptions in our service. Any damage to or failure of our systems could result in interruptions in our service. Interruptions in our service could materially and adversely affect our business, financial condition and results of operations.

 

Any environmental claims or failure to comply with any present or future environmental regulations, as well as any fire or other industrial accident, may require us to spend additional funds and may materially and adversely affect our financial condition and results of operations.

 

We are subject to various laws and regulations relating to the use, storage, discharge and disposal of chemical by-products of, and water used in, our packaging and interconnect materials production processes, and the emission of volatile organic compounds and the discharge and disposal of solid industrial wastes from electronic manufacturing services operations. In the recent years, we have been subject to environmental administrative actions and judicial proceedings related to certain wastewater discharge incidents that occurred at our facilities. As a result of these proceedings, we have been subject to monetary fines as well as sanctions, including orders to suspend or limit our operations and criminal charges against us.

 

In December 2013, the Kaohsiung City Environmental Protection Bureau ordered us to suspend the operations at our K7 Plant’s wafer-level process where nickel was used for alleged wastewater discharge violations and imposed a NT$110.1 million fine against us. The NT$110.1 million fine was later reduced to NT$109.4 million as ordered by the Kaohsiung City Environmental Protection Bureau. In December 2014, the Kaohsiung City Environmental Protection Bureau lifted the suspension order and approved the full resumption of operations of our K7 Plant after ordering a series of examinations, hearings and trial runs. In September 2015, the fine was further reduced to NT$102.0 million (US$3.1 million) by the Kaohsiung City Environmental Protection Bureau and we received a refund of NT$7.3 million (US$0.2 million) in October 2015. Although our K7 Plant has resumed full operation, we may be subject to other new environmental claims, charges or investigations on our K7 Plant or other facilities that may cause similar or more sever interruptions to our business and operations.

 

18

With respect to the NT$102.0 million (US$3.1 million) administrative penalty imposed on us by the Kaohsiung City Environmental Protection Bureau, we appealed to the Kaohsiung High Administrative Court in August 2014 seeking to (i) revoke Kaohsiung City Government’s decision, (ii) lift the administrative penalty imposed on us and (iii) demand a refund of the administrative penalty. On March 22, 2016, the Kaohsiung High Administrative Court revoked Kaohsiung City Government’s decision and lifted the administrative penalty. Our demand for a refund of the fine was dismissed. We appealed to the Supreme Administrative Court on April 14, 2016 against the Kaohsiung High Administrative Court’s unfavorable ruling in dismissing a refund. The outcome of the proceeding cannot be predicted with certainty.

 

In connection with the same alleged violations at our K7 plant, in October 2014, the Kaohsiung District Court ruled that we were in violation of the ROC Waste Disposal Act and imposed on us a criminal penalty of NT$3.0 million. We appealed the case to the Taiwan High Court Kaohsiung District Branch in November 2014. In September 2015, the Taiwan High Court Kaohsiung District Branch overturned the decision made by Kaohsiung District Court and found the Company not guilty and repealed the criminal penalty imposed on the Company. The verdict was final and not appealable. For additional details of these administrative actions and judicial proceedings related to our K7 Plant see “Item 4. Information on the Company—Business Overview—Environmental Matters,” “Item 4. Information on the Company—Property, Plants and Equipment” and “Item 8. Financial Information—Consolidated Statements and Other Financial Information—Legal Proceedings.” Defending against any of these pending or future actions will likely be costly and time-consuming and could significantly divert management’s efforts and resources. Any penalties, fines, damages or settlements made in connection with any criminal, civil, and/or administrative investigations and/or lawsuits may have a material adverse effect on our business, results of operations and future prospects.

 

We have made, and expect to continue to make, expenditures to maintain strict compliance with such environmental laws and regulations. For example, in order to demonstrate our commitment to environmental protection, in December 2013, our board of directors approved contributions to environmental protection efforts in Taiwan in a total amount of not less than NT$3,000.0 million, to be made in the next 30 years. For the years ended December 31, 2014 and 2015, we have made contributions in the amount of NT$100.0 million (US$3.0 million) each, respectively, through ASE Cultural and Educational Foundation to fund various environmental projects and our board of directors have resolved in a resolution in January 2016 to contribute NT$100.0 million (US$3.0 million) through ASE Cultural and Educational Foundation in environmental projects in 2016. The costs of current and future compliance with environmental laws and regulations could require us to acquire costly equipment or to incur other significant expenses that may have a material adverse effect on our financial condition and results of operations.

 

Negative publicity may adversely affect our brand and reputation, which may result in a material adverse impact on our business, results of operations and prospects and cause fluctuations in the price of our common shares and ADSs.

 

Any negative publicity may damage our brand and reputation, harm our ability to attract and retain customers and result in a material adverse impact on our results of operations and prospects as well as cause fluctuations in the trading price of our common shares and ADSs. In addition, any change in policy or directions in which we carry out our corporate social responsibility or corporate sustainability activities may also have an adverse effect on our reputation. Furthermore, in recent years, we have experienced and may continue to experience negative publicity in connection with administrative penalties and criminal charges related to alleged violations of environmental regulations and laws. For further details, see “—Any environmental claims or failure to comply with any present or future environmental regulations, as well as any fire or other industrial accident, may require us to spend additional funds and may materially and adversely affect our financial condition and results of operations,” “Item 4. Information on the Company—Business Overview—Environmental Matters,” “Item 4. Information on the Company—Property, Plants and Equipment” and “Item 8. Financial Information—Consolidated Statements and Other Financial Information—Legal Proceedings.”

 

19

Climate change, other environmental concerns and green initiatives also presents other commercial challenges, economic risks and physical risks that could harm our results of operations or affect the manner in which we conduct our business.

 

Increasing climate change and environmental concerns could affect the results of our operations if any of our customers request that we exceed any standards set for environmentally compliant products and services, or if raw materials and/or products are required to meet strict inspection standards with respect to any radioactive contamination as a result of concerns arising from radiation leaking incidents, such as the radiation leak, which occurred in March 2011 in Japan. If we are unable to offer such products or offer products that are compliant, but are not as reliable due to the lack of reasonably available alternative technologies, it may harm our results of operations.

 

Furthermore, energy costs in general could increase significantly due to climate change regulations. Therefore, our energy costs may increase substantially if utility or power companies pass on their costs, fully or partially, such as those associated with carbon taxes, emission cap and carbon credit trading programs.

 

We may be subject to intellectual property rights disputes, which could materially adversely affect our business.

 

Our ability to compete successfully and achieve future growth depends, in part, on our ability to develop and protect our proprietary technologies and to secure on commercially acceptable terms certain technologies that we do not own. We cannot assure you that we will be able to independently develop, obtain patents for, protect or secure from any third party, the technologies required.

 

Our ability to compete successfully also depends, in part, on our ability to operate without infringing the proprietary rights of others. In particular, the semiconductor and electronics industries are characterized by frequent litigation regarding patent and other intellectual property rights. In February 2006, Tessera filed a suit against us and others alleging patent infringement. In February 2014, ASE Inc. and our U.S. subsidiary, ASE (U.S.) Inc. reached a term sheet agreement with Tessera to fully resolve the remaining legal proceedings between each other, under which we would pay a total of US$30.0 million to Tessera (which was fully recognized by us in the fourth quarter of 2013) and both Tessera and we would dismiss all pending claims against each other. The final settlement agreement was entered into among the parties in October 2014 and the final settlement amount was reduced to US$27.0 million. In October 2014, the United States District Court for the Northern District of California dismissed all claims between Tessera and us. We have fully paid the settlement amount in January 2015 and reversed the settlement amount of US$3.0 million in the fourth quarter of 2014.

 

Any litigation, whether as plaintiff or defendant and regardless of the outcome, is costly and diverts company resources. Any of the foregoing could harm our competitive position and render us unable to provide some of our services operations.

 

Our major shareholders may take actions that are not in, or may conflict with, our public shareholders’ best interest.

 

Members of the Chang family own, directly or indirectly, a significant interest in our outstanding common shares. See “Item 7. Major Shareholders and Related Party Transactions—Major Shareholders.” Accordingly, these shareholders will continue to have the ability to exercise a significant influence over our business, including matters relating to:

 

· our management and policies;

 

· the timing and distribution of dividends; and

 

· the election of our directors.

 

Members of the Chang family may take actions that you may not agree with or that are not in our or our public shareholders’ best interests.

 

20

We are an ROC company and, because the rights of shareholders under ROC law differ from those under U.S. law and the laws of certain other countries, you may have difficulty protecting your shareholder rights.

 

Our corporate affairs are governed by our Articles of Incorporation and by the laws governing corporations incorporated in the ROC. The rights of shareholders and the responsibilities of management and the members of the board of directors under ROC law are different from those applicable to a corporation incorporated in the United States and certain other countries. As a result, public shareholders of ROC companies may have more difficulty in protecting their interests in connection with actions taken by management or members of the board of directors than they would as public shareholders of a corporation in the United States or certain other countries.

 

We have made investments in, and are exploring the possibility of expanding our businesses and operations to, or making additional investments in, the PRC, which may expose us to additional political, regulatory, economic and foreign investment risks.

 

We currently maintain packaging and testing facilities and electronic manufacturing services sites in the PRC. We also made substantial investments in PRC real estate development through our subsidiaries in the PRC. Under PRC laws and regulations, foreign investment projects, such as our subsidiaries, must obtain certain approvals from the relevant governmental authorities in the provinces or special economic zones in which they are located and, in some circumstances, from the relevant authorities in the PRC’s central government. Foreign investment projects must also comply with certain regulatory requirements. However, PRC laws and regulations are often subject to varying interpretations and means of enforcement, and additional approvals from the relevant governmental authorities may be required for the operations of our PRC subsidiaries. If required, we cannot assure you that we will be able to obtain these approvals in a timely manner, if at all. Because the PRC government holds significant discretion in determining matters relating to foreign investment, we cannot assure you that the relevant governmental authorities will not take action that is materially adverse to our PRC operations.

 

In addition, the PRC stock market is subject to extreme price and volume fluctuations. We are the controlling shareholder of Universal Scientific Shanghai, which is an entity currently listed on the Shanghai Stock Exchange. The PRC securities markets have recently experienced, and may experience in the future, significant price declines and volatility. Any volatility may have a significant effect on Universal Scientific Shanghai’s share price and may indirectly affect the market price of our common shares and ADSs.

 

Our global manufacturing and sales activities subject us to risks associated with legal, political, economic or other conditions or developments in various jurisdictions, including in particular the ROC and the PRC, which could negatively affect our business and financial status and therefore the market value of your investment.

 

Our principal executive office and our principal production facilities are located in the ROC, and a substantial majority of our net revenues are derived from our operations in the ROC and the PRC. In addition, we have operations worldwide and a significant percentage of our revenue comes from sales to locations outside the ROC or the PRC. Operating in the ROC, PRC and other overseas locations exposes us to changes in policies and laws, as well as the general political and economic conditions, security risks, health conditions and possible disruptions in transportation networks, in the various countries in which we operate, which could result in an adverse effect on our business operations in such countries. If any of our global operations are affected by the legal, political, economic or other conditions in the jurisdiction we operate, our results of operations as well as market price and the liquidity of our ADSs and common shares may be materially and adversely affected.

 

Any impairment charges may have a material adverse effect on our net income.

 

Under IFRS, we are required to evaluate our assets, such as equipment, goodwill and investments, for possible impairment at least annually or whenever there is an indication of impairment. If certain criteria are met, we are required to record an impairment charge.

 

With respect to assets, we recognized impairment charges of NT$691.9 million, NT$308.1 million and NT$258.1 million (US$7.9 million) in 2013, 2014 and 2015, respectively, primarily as a result of an impairment charge related to buildings and improvement, and impaired equipment and investment. See “Item 5. Operating and Financial Review and Prospects—Operating Results and Trend Information—Critical Accounting Policies and Estimates—Impairment of Tangible and Intangible Assets Other Than Goodwill,” “Item 5. Operating and Financial Review and Prospects—Operating Results and Trend Information—Critical Accounting Policies and Estimates— Valuation of Investments” and “Item 5. Operating and Financial Review and Prospects—Operating Results and Trend Information—Critical Accounting Policies and Estimates—Goodwill.”

 

21

We are unable to estimate the extent and timing of any impairment charges for future years and we cannot give any assurance that impairment charges will not be required in periods subsequent to December 31, 2015. Any impairment charge could have a material adverse effect on our net income. The determination of an impairment charge at any given time is based significantly on our expected results of operations over a number of years in the future. As a result, an impairment charge is more likely to occur during a period in which our operating results and outlook are otherwise already depressed.

 

Our adoption of new financial reporting standards, effective January 1, 2013, may have material impact on our financial statements thereafter.

 

We have historically presented our consolidated financial statements for and prior to the year ended December 31, 2012 in accordance with ROC GAAP for purposes of our filings with the Taiwan Stock Exchange, with reconciliation to U.S. GAAP for certain filings with the SEC. According to the announcement of the FSC, on May 14, 2009, effective January 1, 2013, companies listed on the Taiwan Stock Exchange, including us, must report their financial statements in accordance with the Taiwan-IFRS. Accordingly, we have adopted Taiwan-IFRS in the ROC for our interim quarterly earnings releases beginning in the first quarter of 2013 and our annual consolidated financial statements beginning in 2013. While we have adopted Taiwan-IFRS for ROC reporting purposes, we have also adopted and will continue to adopt IFRS, which differs from Taiwan-IFRS, for certain filings with the SEC, including this annual report and future reports on Form 20-F. Following our adoption of IFRS for SEC filing purposes, we will no longer be required to reconcile net income and balance sheet differences under our consolidated financial statements with U.S. GAAP.

 

Taiwan-IFRS differs from IFRS in certain respects, including, but not limited to the extent that any new or amended standards or interpretations applicable under IFRS may not be timely endorsed by the FSC. Because of the differences in accounting treatments, the adoption of Taiwan-IFRS and IFRS may have material impact on our results of operations and financial condition in our reported financial statements going forward.

 

Provisions of our outstanding convertible bonds could discourage an acquisition of us by a third party.

 

In September 2013, we completed an offering of US$400.0 million in aggregate principal amount of convertible bonds due 2018 (“2018 Convertible Bonds”), and in July 2015, we completed an offering of US$200.0 million in aggregate principle amount of NTD-linked convertible bonds due 2018 (“2018 NTD-linked Convertible Bonds”). Certain provisions of our convertible bonds could make it more difficult or more expensive for a third party to acquire us. In the event that (1) our common shares cease to be listed on the Taiwan Stock Exchange; (2) any person or persons acting together acquire control of us if such person or persons do not have, and would not be deemed to have, control of us as of a specified date; (3) we consolidate with or merge into or sell or transfer all or substantially all of our assets to any other person, unless the consolidation, merger, sale or transfer will not result in the other person or persons acquiring control over us or the successor entity; or (4) one or more other persons acquire the legal or beneficial ownership of all or substantially all of our capital stock, holders of these bonds shall have the right to require us to repurchase all or any portion of the principal amount thereof (which is US$200,000 or any integral multiples thereof) of such holder’s bonds. “Control” means the right to appoint and/or remove all or the majority of the members of our board of directors or other governing body, whether obtained directly or indirectly, and whether obtained by ownership of share capital, the possession of voting rights, contract or otherwise. However, a “change of control” will not be deemed to have occurred (i) solely as a result of the issuance or transfer, with the Company’s corporation, of any preferred shares in the Company’s capital or (ii) if the closing price per common share for any five trading days within the period of 10 consecutive trading days ending immediately after the later of the change of control or the public announcement of the change of control equals or exceeds 110% of the conversion price in effect on each of those five trading days.

 

The accounting treatment for our outstanding convertible bonds, including the treatment for conversion option, redemption option and put option embedded in our outstanding convertible bonds, could have a material effect on our reported financial results.

  

22

In September 2013, we completed the offering of the 2018 Convertible Bonds. Since the 2018 Convertible Bonds are denominated in U.S. dollars, which is different from our functional currency under IFRS, we separated the conversion option, redemption option and put option embedded in 2018 Convertible Bonds (collectively, the “Bond Options”) and recognized them as a freestanding derivative at fair value through profit or loss. To determine the fair value of the Bond Options of the 2018 Convertible Bonds, we are subject to a mark-to-market accounting on the Bond Options embedded in the 2018 Convertible Bonds. As a result, if the fair value of our common shares rises, mark to market of the Bond Options would lead to losses in our financial statements. For each reporting period over the term of the convertible bonds, a gain (or loss) will be reported in our consolidated statement of comprehensive income to the extent the fair value of the Bond Options changes from the previous period. Changes in fair value of the Bond Options generated a loss for NT$75.0 million, NT$777.6 million and NT$112.0 million (US$3.4 million) in 2013, 2014 and 2015, respectively. See note 18 to our audited consolidated financial statements included in this annual report.

 

Any failure to achieve and maintain effective internal controls could have a material adverse effect on our business and results of operations.

 

We are subject to reporting obligations under the U.S. securities laws. The SEC as required by Section 404 of the Sarbanes-Oxley Act of 2002 adopted rules requiring every public company to include a management report on the effectiveness of such company’s internal control over financial reporting in its annual report. In addition, an independent registered public accounting firm must report on such company’s internal control over financial reporting.

 

Our management concluded that our internal control over financial reporting was effective as of December 31, 2015 and our independent registered public accounting firm has issued an attestation report concluding that our internal control over financial reporting was effective in all material aspects. As effective internal control over financial reporting is necessary for us to produce reliable financial reports and is important to help prevent fraud, any failure to maintain effective internal control over financial reporting could harm our business and result in a loss of investor confidence in the reliability of our financial statements, which in turn could negatively impact the trading price of our common shares and ADSs. Furthermore, we may need to incur additional costs and use additional management and other resources in an effort to comply with Section 404 of the Sarbanes-Oxley Act and other requirements going forward.

 

We could potentially face tax uncertainties arising from the decisions, activities, and operations undertaken by us.

 

There are many business activities that may give rise to tax issues in our daily operations, ranging from procurement, research and development activities, manufacturing to product storage and distribution, among other activities. Additional tax liabilities such as double taxation, inapplicability of tax incentives, tax adjustment and related interest and penalties may arise if all these tax issues are not dealt with properly. The development and evolution of tax laws and regulations present considerable uncertainties in interpretation and enforcement, which could call for more onerous compliance measures and tax audits in the jurisdictions in which we operate. Failure to comply with any change in tax laws could result in unfavorable tax consequences to us and have an adverse impact on our business, financial condition and results of operations.

 

Risks Relating to Taiwan, ROC

 

Strained relations between the ROC and the PRC and disruptions in Taiwan’s political environment caused by domestic political events could negatively affect our business and the market value of your investment.

 

Our principal executive offices and our principal facilities are located in Taiwan and approximately 48.5%, 52.1% and 46.9% of our operating revenues in 2013, 2014 and 2015, respectively, were derived from our operations in Taiwan. Accordingly, our business and financial condition may be affected by changes in local governmental policies and political and social instability.

 

The ROC has a unique international political status. The government of the PRC asserts sovereignty over all of China, including Taiwan, and does not recognize the legitimacy of the ROC government. Although significant economic and cultural relations have been established in recent years between the ROC and the PRC, relations have often been strained. Any major change in the Taiwanese political environment, including the outcome of presidential or municipal elections, or potential shifts in government policy, may affect the direction of economic and political developments and negatively impact the economic and political environment in Taiwan. Past developments related to the interaction between the ROC and the PRC, domestic political events or election results have on occasion depressed the market prices of the securities of Taiwanese or Taiwan-related companies, including our own. Relations between the ROC and the PRC and other factors affecting the political or economic conditions in Taiwan could have a material adverse effect on our financial condition and results of operations, as well as the market price and the liquidity of our common shares and ADSs.

 

23

Currently, we manufacture interconnect materials in the PRC through our wholly owned subsidiary, ASE Shanghai. We also provide packaging and testing services in the PRC through some of our subsidiaries. In addition, we engage in the PRC in real estate development and the manufacture of computer peripherals and electronic components through our subsidiaries in the PRC. See “Item 4. Information on the Company—Organizational Structure—Our Consolidated Subsidiaries.” In the past, ROC companies, including ourselves, were prohibited from investing in facilities for the packaging and testing of semiconductors in the PRC. Although the prohibitions have been relaxed since February 2010, the ROC government currently still restricts certain types of investments by ROC companies, including ourselves, in the PRC. We do not know when or if such laws and policies governing investment in the PRC will be amended, and we cannot assure you that such ROC investment laws and policies will permit us to make further investments of certain types in the PRC in the future that we consider beneficial to us. Our growth prospects and profitability may be adversely affected if we are restricted from making certain additional investments in the PRC and are not able to fully capitalize on the growth of the semiconductor industry in the PRC.

 

As a substantial portion of our business and operations is located in Taiwan, we are vulnerable to earthquakes, typhoons, drought and other natural disasters, as well as power outages and other industrial incidents, which could severely disrupt the normal operation of our business and adversely affect our results of operations.

 

Taiwan is susceptible to earthquakes and has experienced severe earthquakes which caused significant property damage and loss of life, particularly in the central and eastern parts of Taiwan. Earthquakes have damaged production facilities and adversely affected the operations of many companies involved in the semiconductor and other industries. For example, in February 2016, an earthquake measuring 6.4 on the Richter magnitude scale occurred in Kaohsiung caused several death and property damages. However, the earthquake did not have a material impact on our operations. We have never experienced structural damage to our facilities or damage to our machinery and equipment as a result of these earthquakes. In the past, however, we have experienced interruptions to our production schedule primarily as a result of power outages caused by earthquakes.

 

Taiwan is also susceptible to typhoons, which may cause damage and business interruptions to companies with facilities located in Taiwan. For example, on August 8, 2015, Taiwan experienced severe damage from typhoon Soudelor that caused several deaths, severe flooding, extensive property damage and loss of electricity for millions of households. Taiwan has experienced severe droughts in the past. Although we have not been directly affected by droughts, we are dependent upon water for our packaging and substrates operations and a drought could interrupt such operations. In addition, a drought could interrupt the manufacturing process of the foundries located in Taiwan, in turn disrupting some of our customers’ production, which could result in a decline in the demand for our services. In addition, the supply of electrical power in Taiwan, which is primarily provided by Taiwan Power Company, the state-owned electric utility, is susceptible to disruption that could be prolonged and frequent, caused by overload as a result of high demand or other reasons.

 

Kaohsiung is one of the major industrial cities in Taiwan. Our testing and packaging businesses have been founded in Kaohsiung and currently our primary testing and packaging operations are located in Kaohsiung. In July 2014, following leaks from underground propene pipes, a series of propene pipeline explosions occurred in the Cian-Jhen and Ling-Ya districts of Kaohsiung. 32 people were killed and 321 others were injured from this incident. Although we have not been directly affected by the explosion, future industrial incidents could negatively affect our operation and result in interruption or delay of our operation or production capacity.

 

Our production facilities as well as many of our suppliers and customers and providers of complementary semiconductor manufacturing services, including wafer foundries, are located in Taiwan. If our customers are affected by an earthquake, a typhoon, a drought or any other natural disasters, or power outage or other industrial incidents, it could result in a decline in the demand for our services. If our suppliers or providers of complementary semiconductor manufacturing services are affected, our production schedule could be interrupted or delayed. As a result, a major earthquake, typhoon, drought or other natural disaster in Taiwan, or a power outage or other industrial incident could severely disrupt the normal operation of our business and have a material adverse effect on our financial condition and results of operations.

 

24

We face risks related to health epidemics and outbreaks of contagious diseases, including H5N1 influenza, H7N9 influenza, H9N2 influenza, Severe Acute Respiratory Syndrome, or SARS, Middle East Respiratory Syndrome, or MERS, Ebola virus and Zika virus.

 

There have been reports of outbreaks of a highly pathogenic influenza caused by the H5N1, H7N9 and H9N2 viruses, in certain regions of Asia and other parts of the world. In recent years, Ebola virus disease broke out in West Africa, with a number of people having died of the disease in countries such as Guinea, Sierra Leone and Liberia. There are also cases of patients diagnosed with Ebola in the United States and Europe. In addition, Zika virus disease broke out in the Americas in 2015 and is currently ongoing, infecting people throughout South America, Central America, Mexico and the Caribbean. The disease is strongly linked to cases of microcephaly and Guillain–Barré syndrome in Brazil. An outbreak of such contagious diseases in the human population could result in a widespread health crisis that could adversely affect the economies and financial markets of many countries. Additionally, a recurrence of SARS, a highly contagious form of atypical pneumonia, similar to the occurrence in 2003, which affected the PRC, Hong Kong, Taiwan, Singapore, Vietnam and certain other countries, and MERS, a viral respiratory infection which affected South Korea in 2015, would also have similar adverse effects. Since most of our operations and customers and suppliers are based in Asia (mainly in Taiwan and the PRC), an outbreak of H5N1 influenza, H7N9 influenza, H9N2 influenza, SARS, MERS, Ebola, Zika virus or other contagious diseases in Asia or elsewhere, or the perception that such an outbreak could occur, and the measures taken by the governments of countries affected, including the ROC and the PRC, could adversely affect our business, financial condition or results of operations.

 

Risks Relating to Ownership of Our Common Shares and the ADSs

 

The market for our common shares and the ADSs may not be liquid.

 

Active, liquid trading markets generally result in lower price volatility and more efficient execution of buy and sell orders for investors, compared to less active and less liquid markets. Liquidity of a securities market is often a function of the volume of the underlying shares that are publicly held by unrelated parties.

 

There has been no trading market outside the ROC for our common shares and the only trading market for our common shares is the Taiwan Stock Exchange. The outstanding ADSs are listed on the New York Stock Exchange. There is no assurance that the market for our common shares or the ADSs will be active or liquid.

 

Although ADS holders are entitled to withdraw our common shares underlying the ADSs from the depositary at any time, ROC law requires that our common shares be held in an account in the ROC or sold for the benefit of the holder on the Taiwan Stock Exchange. In connection with any withdrawal of common shares from our ADS facility, the ADSs evidencing these common shares will be cancelled. Unless additional ADSs are issued, the effect of withdrawals will be to reduce the number of outstanding ADSs. If a significant number of withdrawals are effected, the liquidity of our ADSs will be substantially reduced. We cannot assure you that the ADS depositary will be able to arrange for a sale of deposited shares in a timely manner or at a specified price, particularly during periods of illiquidity or volatility.

 

If a non-ROC holder of ADSs withdraws and holds common shares, such holder of ADSs will be required to appoint a tax guarantor, local agent and custodian in the ROC and register with the Taiwan Stock Exchange or the Taipei Exchange in order to buy and sell securities on the Taiwan Stock Exchange.

 

When a non-ROC holder of ADSs elects to withdraw and hold common shares represented by ADSs, such holder of the ADSs will be required to appoint an agent for filing tax returns and making tax payments in the ROC. Such agent will be required to meet the qualifications set by the ROC Ministry of Finance and, upon appointment, becomes the guarantor of the withdrawing holder’s tax payment obligations. Evidence of the appointment of a tax guarantor, the approval of such appointment by the ROC tax authorities and tax clearance certificates or evidentiary documents issued by such tax guarantor may be required as conditions to such holder repatriating the profits derived from the sale of common shares. We cannot assure you that a withdrawing holder will be able to appoint, and obtain approval for, a tax guarantor in a timely manner.

 

In addition, under current ROC law, such withdrawing holder is required to register with the Taiwan Stock Exchange or the Taipei Exchange and appoint a local agent in the ROC to, among other things, open a bank account and open a securities trading account with a local securities brokerage firm, pay taxes, remit funds and exercise such holder’s rights as a shareholder. Furthermore, such withdrawing holder must appoint a local bank or a local securities firm to act as custodian for confirmation and settlement of trades, safekeeping of securities and cash proceeds and reporting and declaration of information. Without satisfying these requirements, non-ROC withdrawing holders of ADSs would not be able to hold or otherwise subsequently sell our common shares on the Taiwan Stock Exchange or otherwise.

 

25

Pursuant to Mainland Investors Regulations, only QDIIs or persons that have otherwise obtained the approval from the MOEAIC and registered with the Taiwan Stock Exchange are permitted to withdraw and hold our shares from a depositary receipt facility. In order to hold our shares, such QDIIs are required to appoint an agent and custodian as required by the Mainland Investors Regulations. If the aggregate amount of our shares held by any QDII or shares received by any QDII upon a single withdrawal or in the aggregate accounts for 10.0% of our total issued and outstanding shares, such QDII must obtain the prior approval from the MOEAIC. We cannot assure you that such approval would be granted.

 

The market value of your investment may fluctuate due to the volatility of the ROC securities market.

 

The trading price of our ADSs may be affected by the trading price of our common shares on the Taiwan Stock Exchange. The ROC securities market is smaller and more volatile than the securities markets in the United States and in many European countries. The Taiwan Stock Exchange has experienced substantial fluctuations in the prices and volumes of sales of listed securities and there are currently limits on the range of daily price movements on the Taiwan Stock Exchange. The Taiwan Stock Exchange Index peaked at 12,495.3 in February 1990, and subsequently fell to a low of 2,560.5 in October 1990. On March 13, 2000, the Taiwan Stock Exchange Index experienced a 617-point drop, which represented the single largest decrease in the Taiwan Stock Exchange Index in its history. During the period from January 1, 2015 to December 31, 2015, the Taiwan Stock Exchange Index peaked at 9,973.12 on April 27, 2015, and reached a low of 7,410.34 on August 24, 2015. Over the same period, the trading price of our common shares ranged from NT$48.05 per share to NT$29.75 per share. On April 28, 2016, the Taiwan Stock Exchange Index closed at 8,473.87, and the closing value of our common shares was NT$32.20 per share.

 

The Taiwan Stock Exchange is particularly volatile during times of political instability, including when relations between Taiwan and the PRC are strained. Several investment funds affiliated with the ROC government have also from time to time purchased securities from the Taiwan Stock Exchange to support the trading level of the Taiwan Stock Exchange. Moreover, the Taiwan Stock Exchange has experienced problems such as market manipulation, insider trading and settlement defaults. The recurrence of these or similar problems could have an adverse effect on the market price and liquidity of the securities of ROC companies, including our common shares and ADSs, in both the domestic and international markets.

 

Holders of common shares and ADSs may experience dilution if we issue stock bonuses and stock options to employees or sell additional equity or equity-linked securities.

 

Similar to other ROC technology companies, we issue bonuses from time to time in the form of common shares. Prior to 2009, bonuses issued in the form of our common shares were valued at par. Beginning in 2009, bonuses in the form of our common shares are valued at the closing price of our common shares on the day prior to our shareholders’ meeting. In addition, under the ROC Company Law we may, upon approval from our board of directors and the ROC Securities and Futures Bureau of the FSC, establish employee stock option plans provided that shareholders’ approval is required if the exercise price of an option would be less than the closing price of our common shares on the Taiwan Stock Exchange on the grant date of the option. ASE Inc. currently maintains three employee stock option plans pursuant to which our full-time employees, including our domestic and foreign subsidiaries, are eligible to receive stock option grants. As of December 31, 2015, 252,606,950 options granted by ASE Inc. were outstanding. In December 2014, the board of directors approved the 5 th Employee Share Option plans, and in April 2015, the FSC approved the 5 th Employee Share Option plans, under which 94,270,000 options were granted in September 2015. See “Item 6. Directors, Senior Management and Employees—Compensation—ASE Inc. Employee Bonus and Stock Option Plans.” The issuance of our common shares pursuant to stock bonuses or stock options may have a dilutive effect on the holders of outstanding common shares and ADSs.

 

 

26

In addition, the sale of additional equity or equity-linked securities may result in additional dilution to our shareholders. In September 2013, we issued 2018 Convertible Bonds to fund procurement of raw materials from overseas. The bonds are convertible by holders at any time on or after October 16, 2013 and up to (and including) August 26, 2018. As of December 31, 2015, none of the bonds has been converted into our common shares, and the balance of the outstanding bonds was US$400.0 million. The initial conversion price was NT$33.085 per common share, subject to adjustment upon the occurrence of certain events, such as the Capital Increase and cash dividend distribution. As of the date of this annual report, the conversion price is NT$30.28 per common share. Upon full conversion, the outstanding bonds will be converted into 395,719,947 common shares if based on the current conversion price, representing 5.0% of our outstanding shares at the end of December 31, 2015. Any conversion of bonds, in full or in part, would dilute the ownership interest of our existing shareholders and our earnings per share and could adversely affect the market price of our ADSs. Moreover, in September 2013, we issued 130,000,000 common shares for public subscription, which was effected by way of an increase in our authorized share capital in the amount of NT$1,300.0 million. The issuance of the zero coupon convertible bonds due 2018 and the Capital Increase could cause dilution to our ADS holders.

 

Restrictions on the ability to deposit our common shares into our ADS facility may adversely affect the liquidity and price of our ADSs.

 

The ability to deposit common shares into our ADS facility is restricted by ROC law. A significant number of withdrawals of common shares underlying our ADSs would reduce the liquidity of the ADSs by reducing the number of ADSs outstanding. As a result, the prevailing market price of our ADSs may differ from the prevailing market price of our common shares on the Taiwan Stock Exchange. Under current ROC law, no person or entity, including you and us, may deposit our common shares in our ADS facility without specific approval of the FSC, unless:

 

(1) we pay stock dividends on our common shares;

 

(2) we make a free distribution of common shares;

 

(3) holders of ADSs exercise preemptive rights in the event of capital increases; or

 

(4) to the extent permitted under the deposit agreement and the relevant custody agreement, investors purchase our common shares, directly or through the depositary, on the Taiwan Stock Exchange, and deliver our common shares to the custodian for deposit into our ADS facility, or our existing shareholders deliver our common shares to the custodian for deposit into our ADS facility.

 

With respect to item (4) above, the depositary may issue ADSs against the deposit of those common shares only if the total number of ADSs outstanding following the deposit will not exceed the number of ADSs previously approved by the FSC, plus any ADSs issued pursuant to the events described in items (1), (2) and (3) above.

 

In addition, in the case of a deposit of our common shares requested under item (4) above, the depositary will refuse to accept deposit of our common shares if such deposit is not permitted under any legal, regulatory or other restrictions notified by us to the depositary from time to time, which restrictions may include blackout periods during which deposits may not be made, minimum and maximum amounts and frequency of deposits.

 

The depositary will not offer holders of ADSs preemptive rights unless the distribution of both the rights and the underlying common shares to our ADS holders are either registered under the Securities Act or exempt from registration under the Securities Act.

 

Holders of ADSs will not have the same voting rights as our shareholders, which may affect the value of their ADSs.

 

The voting rights of a holder of ADSs as to our common shares represented by its ADSs are governed by the deposit agreement. Holders of ADSs will not be able to exercise voting rights on an individual basis. If holders representing at least 51% of the ADSs outstanding at the relevant record date instruct the depositary to vote in the same manner regarding a resolution, including the election of directors, the depositary will cause all common shares represented by the ADSs to be voted in that manner. If the depositary does not receive timely instructions representing at least 51% of the ADSs outstanding at the relevant record date to vote in the same manner for any resolution, including the election of directors, holders of ADSs will be deemed to have instructed the depositary or its nominee to authorize all our common shares represented by the ADSs to be voted at the discretion of our chairman or his designee, which may not be in the interest of holders of ADSs. Moreover, while shareholders who own 1% or more of our outstanding shares are entitled to submit one proposal to be considered at our annual general meetings of shareholders, only holders representing at least 51% of our ADSs outstanding at the relevant record date are entitled to submit one proposal to be considered at our annual general meetings of shareholders. Hence, only one proposal may be submitted on behalf of all ADS holders.

 

27

The right of holders of ADSs to participate in our rights offerings is limited, which could cause dilution to your holdings.

 

We may from time to time distribute rights to our shareholders, including rights to acquire our securities. Under the deposit agreement, the depositary will not offer holders of ADSs those rights unless both the distribution of the rights and the underlying securities to all our ADS holders are either registered under the Securities Act or exempt from registration under the Securities Act. Although we may be eligible to take advantage of certain exemptions under the Securities Act available to certain foreign issuers for rights offerings, we can give no assurances that we will be able to establish an exemption from registration under the Securities Act, and we are under no obligation to file a registration statement for any of these rights. Accordingly, holders of ADSs may be unable to participate in our rights offerings and may experience dilution of their holdings.

 

If the depositary is unable to sell rights that are not exercised or not distributed or if the sale is not lawful or reasonably practicable, it will allow the rights to lapse, in which case holders of ADSs will receive no value for these rights.

 

Changes in exchange controls, which restrict your ability to convert proceeds received from your ownership of ADSs, may have an adverse effect on the value of your investment.

 

Under current ROC law, the depositary, without obtaining approvals from the Central Bank of the Republic of China (Taiwan) or any other governmental authority or agency of the ROC, may convert NT dollars into other currencies, including U.S. dollars, for:

 

· the proceeds of the sale of common shares represented by ADSs or received as stock dividends from our common shares and deposited into the depositary receipt facility; and

 

· any cash dividends or distributions received from our common shares.

 

In addition, the depositary may also convert into NT dollars incoming payments for purchases of common shares for deposit in the ADS facility against the creation of additional ADSs. The depositary may be required to obtain foreign exchange approval from the Central Bank of the Republic of China (Taiwan) on a payment-by-payment basis for conversion from NT dollars into foreign currencies of the proceeds from the sale of subscription rights for new common shares. Although it is expected that the Central Bank of the Republic of China (Taiwan) will grant this approval as a routine matter, we cannot assure you that in the future any approval will be obtained in a timely manner, or at all.

 

Under the ROC Foreign Exchange Control Law, the Executive Yuan of the ROC government may, without prior notice but subject to subsequent legislative approval, impose foreign exchange controls in the event of, among other things, a material change in international economic conditions. We cannot assure you that foreign exchange controls or other restrictions will not be introduced in the future.

 

The value of your investment may be reduced by possible future sales of common shares or ADSs by us or our shareholders.

 

While we are not aware of any plans by any major shareholders to dispose of significant numbers of common shares, we cannot assure you that one or more existing shareholders or owners of securities convertible or exchangeable into or exercisable for our common shares or ADSs will not dispose of significant numbers of common shares or ADSs. In addition, several of our subsidiaries and affiliates hold common shares, depositary shares representing common shares and options to purchase common shares or ADSs. They may decide to sell those securities in the future. See “Item 7. Major Shareholders and Related Party Transactions—Major Shareholders” for a description of our significant shareholders and affiliates that hold our common shares.

 

We cannot predict the effect, if any, that future sales of common shares or ADSs, or the availability of common shares or ADSs for future sale, will have on the market price of our common shares or the ADSs prevailing from time to time. Sales of substantial numbers of common shares or ADSs in the public market, or the perception that such sales may occur, could depress the prevailing market prices of our common shares or the ADSs.

 

28

Item 4. Information on the Company

 

HISTORY AND DEVELOPMENT OF THE COMPANY

 

Advanced Semiconductor Engineering, Inc. was incorporated on March 23, 1984 as a company limited by shares under the ROC Company Law, with facilities in the Nantze Export Processing Zone located in Kaohsiung, Taiwan. Our principal executive offices are located at 26 Chin Third Road, Nantze Export Processing Zone, Nantze, Kaohsiung, Taiwan, ROC and our telephone number at the above address is (886) 7-361-7131. Our common shares have been listed on the Taiwan Stock Exchange under the symbol “2311” since July 1989, and ADSs representing our common shares have been listed on the New York Stock Exchange under the symbol “ASX” since September 2000.

 

Acquisition of Common Shares and American Depositary Shares of SPIL

 

In August 2015, we announced an offer to purchase 779,000,000 common shares (including those represented by American depositary shares) of SPIL through concurrent tender offers in the ROC and the U.S., at a price of NT$45 per SPIL common share and NT$225 per SPIL American depositary share. The Initial SPIL Tender Offer expired on September 22, 2015, with 1,147,898,165 common shares (including those represented by American depositary shares) validly tendered and not validly withdrawn, exceeding the offer cap, and as a result, after proration, 725,749,060 SPIL common shares and 10,650,188 SPIL American depositary shares were accepted for purchase. On October 1, 2015, we became a shareholder holding approximately 24.99% of the issued and outstanding share capital in SPIL.

 

In December 2015, following an announcement by SPIL that it plans to issue 1,033 million shares, if approved by SPIL shareholders, to a third party pursuant to a share placement agreement, we submitted a written proposal to SPIL’s Board proposing to acquire all SPIL shares not otherwise owned by ASE, contingent upon the termination of the share placement agreement. The board of directors of SPIL (“SPIL Board”) did not respond to our acquisition proposal. Subsequently, we launched an offer to purchase 770,000,000 common shares (including those represented by American depositary shares) of SPIL through concurrent tender offers in the ROC and the U.S., at a price of NT$55 per SPIL common share and NT$275 per SPIL American depositary share. The Second SPIL Tender Offer expired on March 17, 2016. Because the TFTC did not render a decision before the expiration of the Second SPIL Tender Offer, resulting in the failure to satisfy one of the tender offer conditions, the Second SPIL Tender Offer was not successful. The TFTC subsequently suspended its review on March 23, 2016.

 

Notwithstanding the failure of the Second SPIL Tender Offer, we announced that we will continue to seek control of SPIL, with the purpose of effecting the SPIL Merger. In order to implement the SPIL Merger, we announced that we intend to seek to discharge the SPIL Board at one or more shareholders’ meetings, or await the expiration of the current SPIL Board’s term, and elect new nominees to the SPIL Board. If after such election one half or more of the SPIL Board is composed of candidates nominated or designated by us, we intend, in accordance with the Enterprise Mergers and Acquisitions Act, to cause the SPIL Board to resolve in favor a SPIL Merger.

 

We expect to continue to seek the support of SPIL shareholders in order to acquire 100% of the issued and outstanding share capital of SPIL not owned by us, by all legally available means, and will continue to seek all necessary antitrust or other regulatory approvals in Taiwan, the United States and other jurisdictions where we do business. In addition, upon the completion of the SPIL Merger, we plan to establish a holding company in Taiwan that will hold 100% of the equity interests in both ASE and SPIL such that ASE and SPIL will be wholly owned subsidiaries of such holding company. The proposed new holding company will maintain all current operations of ASE and SPIL in Taiwan.

 

In March and April 2016, we acquired an additional 258,300,000 common shares of SPIL (including those represented by American depositary shares) through open market purchases. As of April 28, 2016, we beneficially own 1,037,300,000 common shares of SPIL (calculated as the sum of 935,596,800 common shares of SPIL and 101,703,200 common shares of SPIL underlying 20,340,640 American depositary shares of SPIL), representing 33.29% of the issued and outstanding share capital of SPIL (calculated based on 3,116,361,139 common shares of SPIL (including those represented by American depositary shares) outstanding as of March 31, 2016 as reported in SPIL’s annual report on Form 20-F for the year ended December 31, 2015).

 

29

We will otherwise continue to seek opportunities for cooperation with SPIL, subject to applicable law. In addition, we intend to consider other possibilities, including further acquisitions of common shares of SPIL, including those represented by American depositary shares, whether in the market, privately negotiated transactions, or through one or more tender offers, or one or more other potential transactions. We will continue to review our investment in SPIL on the basis of available information and reserve the right to increase or decrease our ownership stake from time to time.

 

There were no public takeover offers by third parties of ASE’s shares which occurred in 2014 and 2015.

 

2018 NTD-linked Convertible Bonds

 

In July 2015, we completed an offering of US$200.0 million aggregate principal amount of NTD-linked zero coupon convertible bonds due 2018. The 2018 NTD-linked Convertible Bonds were offered to persons outside of the United States in compliance with Regulation S under the Securities Act. The bonds will mature on March 27, 2018, unless previously repurchased or converted in accordance with their terms prior to such date. The net proceeds from the offering were used to fund procurement of equipment from overseas. Please refer to note 18 of our consolidated financial statements included in this annual report for more information. As of December 31, 2015, the balance of the outstanding convertible bonds was US$200.0 million.

 

ASEEE

 

On May 8, 2015, we entered into a joint venture agreement with TDK Corporation, under which both parties would invest in ASE Embedded Electronics Inc. (“ASEEE”), a company limited by shares incorporated under ROC law. ASEEE will engage in the business of manufacture, marketing, distribution and sale of embedded substrates and it plans to leverage TDK Corporation’s expertise, patents and knowledge in the field of SESUB technology. In August 2015, we invested NT$618.1 million (US$18.9 million) for 51% shareholding in ASEEE. The investment in ASEEE is accounted for using the equity method. See “Item 10. Material Contracts—Joint Venture Agreement between ASE and TDK Corporation” for more information.

 

USI Group Restructuring

 

In April 2015, our subsidiary Universal Scientific completed a spin-off of its subsidiaries to USI Inc.. As a result of such spin-off, as of April 1, 2015, ASE Inc. held approximately 99.01% of Universal Scientific and approximately 99.17% of USI Inc.

 

Universal Scientific, USI Inc. and USI Inc.’s directly and indirectly held subsidiaries (collectively, the “USI Group”) primarily engage in electronic manufacturing services in relation to computers, consumer electronics, communications, industrial and automotive, among other services and businesses. As part of our corporate reorganization to align each business function to different legal entity groups, the board of directors of ASE Inc. passed a resolution on September 24, 2015 and approved the sale of all ASE Inc.’s shareholding in Universal Scientific to UGTW, an indirectly held subsidiary of USI Inc., which will result in USI Inc. indirectly holding Universal Scientific (the “Universal Scientific Share Transfer”). The Universal Scientific Share Transfer was approved by the Investment Commission of MOEA on February 3, 2016 and the majority of ASE Inc.’s shares in Universal Scientific were transferred to UGTW in March 2016, with the remaining shares to be transferred in May 2016.

 

For more information on our history and development, see “—Organizational Structure.”

 

Our principal capital expenditures for the years ended December 31, 2013, 2014 and 2015 have been for machinery and equipment procurements and investments in buildings and improvement in connection with the expansion of our capacity expansion, for which we spent NT$27,044.1 million, NT$43,448.6 million and NT$28,280.8 million (US$862.5 million), respectively. We had commitments for capital expenditures of approximately US$246.7 million, of which US$53.6 million had been paid as of December 31, 2015, mainly in connection with the expansion of our packaging and testing services operations primarily in the ROC and the PRC. Any future expansion of our operating activities could result in additional capital expenditures. We anticipate our capital expenditures in 2016 will be financed through our existing cash, marketable securities, expected cash flow from operations and existing credit lines under our loan facilities and will consist of, among other things, additional machinery and equipment procurements for our capacity expansions. See “Item 5. Operating and Financial Review and Prospects—Liquidity and Capital Resources” for more information. Other than the acquisition of common shares and American depositary shares of SPIL by way of the Initial SPIL Tender Offer and through open market purchases, there were no significant financial investments or divestitures in 2013, 2014 and 2015. See “Item 4. Information on the Company—History and Development of the Company—Acquisition of Common Shares and American Depositary Shares of SPIL” for information.

30

BUSINESS OVERVIEW

 

ASE is among the leading providers of semiconductor packaging and testing services based on 2015 revenues. Our services include semiconductor packaging, production of interconnect materials, front-end engineering testing, wafer probing and final testing services, as well as integrated solutions for electronic manufacturing services in relation to computers, peripherals, communications, industrial, automotive, and storage and server applications. We believe that, as a result of the following strengths, we are able to compete effectively to meet customers’ requirements across a wide range of end-use applications:

 

· our ability to provide a broad range of cost-effective semiconductor packaging and testing services on a large-scale turnkey basis within key centers of semiconductor manufacturing;

 

· our expertise in developing and providing cost-effective packaging, interconnect materials and testing technologies and solutions;

 

· our ability to provide proactive original design manufacturing services using innovative solution-based designs;

 

· our commitment to investing in capacity expansion and research and development, as well as selective acquisitions, that will benefit customers and our business;

 

· our geographic presence in key centers of outsourced semiconductor and electronics manufacturing; and

 

· our long-term relationships with providers of complementary semiconductor manufacturing services, including our strategic alliance with TSMC, one of the world’s largest dedicated semiconductor foundries.

 

We believe that it is still the trend for semiconductor companies to outsource their packaging, testing and manufacturing requirements as semiconductor companies rely on independent providers of foundry, packaging and testing and electronic manufacturing services. In response to the increased pace of new product development and shortened product life and production cycles, semiconductor companies are increasingly seeking both independent packaging and testing companies that can provide turnkey services in order to reduce time-to-market and electronic manufacturing companies with proactive original design capabilities that can provide large-scale production. We believe that our technological expertise and scale and our ability to integrate our broad range of solutions into turnkey services and electronic manufacturing services allow us to benefit from the accelerated outsourcing trend and better serve our existing and potential customers.

 

We believe that we have benefited, and will continue to benefit, from our geographic location in Taiwan. Taiwan is currently the largest center for outsourced semiconductor manufacturing in the world and has a high concentration of electronic manufacturing service providers. Our close proximity to foundries and other providers of complementary semiconductor manufacturing services is attractive to our customers who wish to take advantage of the efficiencies of a total semiconductor manufacturing solution by outsourcing several stages of their manufacturing requirements. We believe that, as a result, we are well positioned to meet the advanced semiconductor engineering and manufacturing requirements of our customers.

 

Industry Background

 

General

 

Semiconductors are the basic building blocks used to create an increasing variety of electronic products and systems. Continuous improvements in semiconductor process and design technologies have led to smaller, more complex and more reliable semiconductors at a lower cost per function. These improvements have resulted in significant performance and price benefits to manufacturers of electronic products. As a result, semiconductor demand has grown substantially in our primary end-user markets for communications, computing and consumer electronics, and has experienced increased growth in other markets such as automotive products and industrial automation and control systems.

 

31

The semiconductor industry is characterized by strong long-term growth, with periodic and sometimes severe cyclical downturns. The Semiconductor Industry Association reported that worldwide sales of semiconductors increased from approximately US$51.0 billion in 1990 to approximately US$335.2 billion in 2015. We believe that overall growth and cyclical fluctuations will continue over the long-term in the semiconductor industry.

 

Electronic Manufacturing Services

 

Electronic manufacturing service providers typically achieve large economies of scale in manufacturing by pooling together product design techniques and also provide value-added services such as warranties and repairs. Companies who do not need to manufacture a constant supply of products have increasingly outsourced their manufacturing to these service providers so that they can respond quickly and efficiently to sudden spikes in demand without having to maintain large inventories of products.

 

Electronic manufacturing services are sought by companies in a wide range of industries including, among others, information, communications, consumer electronics, automotive electronics, medical treatment, industrial applications, aviation, navigation, national defense and transportation. Although affected by global economic fluctuations, we expect the electronic manufacturing services industry to continue to grow in the long-term, and we have enhanced our presence in the industry since 2010 through our acquisition of a controlling interest in Universal Scientific.

 

Outsourcing Trends in Semiconductor Manufacturing

 

Historically, semiconductor companies designed, manufactured, packaged and tested semiconductors primarily within their own facilities. However, there is a clear trend in the industry to outsource the manufacturing process. Virtually every significant stage of the manufacturing process can be outsourced. Wafer foundry services, semiconductor packaging and testing services, and electronic manufacturing services are currently the largest segments of the independent semiconductor manufacturing services market.

 

The availability of technologically advanced independent manufacturing services has also enabled the growth of “fabless” semiconductor companies that focus on semiconductor design and marketing, while outsourcing their wafer fabrication, packaging and testing requirements to independent companies. We believe that the growth in the number and scale of fabless semiconductor companies that rely solely on independent companies to meet their manufacturing requirements will continue to be a driver of growth for us. Similarly, the availability of technologically advanced independent manufacturing services has encouraged integrated device manufacturers, which traditionally have relied on in-house semiconductor manufacturing capacity, to increasingly outsource their manufacturing requirements to independent semiconductor manufacturing companies.

 

We believe the outsourcing of semiconductor manufacturing services will increase in the future for many reasons, including the following:

 

· Technological Expertise and Significant Capital Expenditure . Semiconductor manufacturing processes have become highly complex, requiring substantial investment in specialized equipment and facilities and sophisticated engineering and manufacturing expertise. In addition, product life cycles have been shortening, magnifying the need to continuously upgrade or replace manufacturing equipment to accommodate new products. As a result, new investments in in-house facilities are becoming less desirable to integrated device manufacturers because of the high investment costs as well as the inability to achieve sufficient economies of scale and utilization rates necessary to be competitive with the independent service providers. Independent packaging, testing, wafer foundry and electronic manufacturing services companies, on the other hand, are able to realize the benefits of specialization and achieve economies of scale by providing services to a large base of customers across a wide range of products. This enables them to reduce costs and shorten production cycles through high capacity utilization and process expertise. In the process, they are also able to focus on discrete stages of semiconductor manufacturing and deliver services of superior quality.

 

Some semiconductor companies with in-house operations are under increasing pressure to rationalize these operations by relocating to locations with lower costs or better infrastructure, in order to lower manufacturing costs and shorten production cycle time. We expect semiconductor companies to increasingly outsource their requirements to take advantage of the advanced technology and scale of operations of independent packaging and testing companies and electronic manufacturing services providers.

 

32

· Focus on Core Competencies . As the semiconductor industry becomes more competitive, semiconductor companies are expected to further outsource their semiconductor manufacturing requirements in order to focus their resources on core competencies, such as semiconductor design and marketing.

 

· Time-to-Market Pressure . The increasingly short product life cycle has accelerated time-to-market pressure for semiconductor companies, leading them to rely increasingly on outsourced suppliers as a key source for effective manufacturing solutions.

 

· Capitalize on the High Growth Rates in Emerging Markets . Emerging markets, and China in particular, have become both major manufacturing centers for the technology industry and growing markets for technology-based products. Thus, in order to gain direct access to the Chinese market, many semiconductor companies are seeking to establish manufacturing facilities in China by partnering with local subcontractors. As a result, certain stages of the semiconductor manufacturing process that were previously handled in-house will be increasingly outsourced in order to improve efficiency.

 

Trends of Mergers and Acquisitions in the Semiconductor Industry

 

The global semiconductor industry is highly competitive, and such competitive landscape is changing as a result of a trend toward consolidation within the industry. In particular, packaging and testing service providers in the semiconductor industry have engaged in cross-border mergers and acquisitions in recent years as part of their expansion strategy, which has gradually changed the ecosystem of the semiconductor industry. Examples of mergers and acquisitions in recent years include mergers and acquisitions by and among semiconductor design companies or integrated device manufacturers, including Intel Corporation’s acquisition of Altera Corporation, ON Semiconductor Corporation’s acquisition of Fairchild Semiconductor International, Inc., NXP Semiconductors N.V.’s acquisition of Freescale Semiconductor, Inc., Avago Technologies Ltd.’s acquisition of Broadcom Corporation and several acquisitions of semiconductor design companies by MediaTek, Inc., and mergers and acquisitions by and among semiconductor packaging and testing companies, including Jiangsu Changjiang Electronics Technology Co., Ltd.’s acquisition of STATS ChipPAC Ltd., Nantong Fujitsu Microelectronics Co., Ltd.’s acquisition of the packaging and testing factory of Advanced Micro Devices, Inc. and Amkor Technology, Inc.’s acquisition of J-Devices Corporation.

 

As a result of the aforementioned mergers and acquisitions, our competitors were able to further strengthen their competitive position by expanding their product offerings and combining their financial resources. We expect this consolidation trend to continue in 2016.

 

Overview of Semiconductor Manufacturing Process

 

The manufacturing of semiconductors is a complex process that requires increasingly sophisticated engineering and manufacturing expertise. The manufacturing process can be generally divided into the following stages:

 

33

 

We are involved in all stages of the semiconductor manufacturing process except circuit design and wafer fabrication.

 

Process

Description

1.  Circuit Design The design of a semiconductor is developed by laying out circuit components and interconnections.
2.  Engineering Test Throughout and following the design process, prototype semiconductors undergo engineering testing, which involves software development, electrical design validation and reliability and failure analysis.
3.  Wafer Fabrication Process begins with the generation of a photomask through the definition of the circuit design pattern on a photographic negative, known as a mask, by an electron beam or laser beam writer. These circuit patterns are transferred to the wafers using various advanced processes.
4.  Wafer Probe Each individual die is electrically tested, or probed, for defects. Dies that fail this test are marked to be discarded.
5.  Packaging (or Assembly) Packaging, also called assembly, is the processing of bare semiconductors into finished semiconductors and serves to protect the die and facilitate electrical connections and heat dissipation. The patterned silicon wafers received from our customers are diced by means of diamond saws into separate dies, also called chips. Basically each die is attached to a leadframe or a laminate (plastic or tape) substrate by epoxy resin. A leadframe is a miniature sheet of metal, generally made of copper and silver alloys, on which the pattern of input/output leads has been cut. On a laminate substrate, typically used in ball grid array, or BGA, packages, the leads take the shape of small bumps or balls. Leads on the leadframe or the substrate are connected by extremely fine gold or copper wires or bumps to the input/output terminals on the chips, through the use of automated machines known as “bonders.” Each chip is then encapsulated, generally in a plastic casing molded from a molding compound, with only the leads protruding from the finished casing, either from the edges of the package as in the case of the leadframe-based packages, or in the form of small bumps on a surface of the package as in the case of BGA or other substrate-based packages.

 

 

34

Process

Description

6.  Final Test Final testing is conducted to ensure that the packaged semiconductor meets performance specifications. Final testing involves using sophisticated testing equipment known as testers and customized software to electrically test a number of attributes of packaged semiconductors, including functionality, speed, predicted endurance and power consumption. The final testing of semiconductors is categorized by the functions of the semiconductors tested into logic/mixed-signal/RF/3D IC/discrete final testing and memory final testing. Memory final testing typically requires simpler test software but longer testing time per device tested.
7.  Module, Board Assembly and Test Module, board assembly and test refers to the combination of one or more packaged semiconductors with other components in an integrated module or board to enable increased functionality.
8.  Material Material refers to the interconnection of materials which connect the input/output on the semiconductor dies to the printed circuit board, such as substrate, leadframe and flip-chip.

 

Strategy

 

Our objective is to provide integrated solutions that set industry standards, including packaging, testing services, interconnect materials design and production capabilities, and to lead and facilitate the industry trend toward outsourcing semiconductor manufacturing requirements. The principal elements of our strategy are to:

 

Grow Our Packaging Services and Expand Our Range of Offerings

 

We believe that an important factor to attract leading semiconductor companies as our customers has been our ability to fulfill demand for a broad range of packaging solutions on a large scale. We intend to continue to develop process and product technologies to meet the packaging requirements of clients. Our expertise in packaging technology has enabled us to develop sophisticated solutions such as flip-chip packaging, bump chip carrier packaging, stacked die packaging and fine-pitch wire bonding. We are continuously investing in research and development in response to and in anticipation of migrations in technology and intend to continue to acquire access to new technologies through strategic alliances and licensing arrangements.

 

The increasing miniaturization of semiconductors and the growing complexity of interconnect technology have also resulted in the blurring of the traditional distinctions among assembly at different levels of integration: chip, module, board and system. In response to this miniaturization and growing complexity, we have focused on providing module assembly services and, in addition, our subsidiary Universal Scientific has provided us with access to process and product technologies at the levels of module, board and system assembly and testing, which helps us to better anticipate industry trends and take advantage of potential growth opportunities. We expect to continue to combine our packaging, testing and materials technologies with the expertise of Universal Scientific at the systems level to develop our SiP business.

 

35

Strategically Expand and Streamline Production Capacity

 

To capitalize on the growing demand for packaging and testing services, we intend to strategically expand our production capacity, both through internal growth and selective acquisitions and joint ventures, with a focus on providing cost competitive and innovative packaging and testing services.

 

We intend to invest in trends that are essential to the development of the industry. We plan to expand our capacity with respect to, but not limited to, 12-inch wafer process, bumping, FC-CSP and SiP products to meet demand for smaller form factors, higher performance and higher packaging density.

 

In addition, we intend to promote our copper wire solutions to our customers in addition to gold wire. Gold wire is a significant raw material for us. Gold prices, however, are subject to intense fluctuations and have in the past impacted our profitability. We believe that replacing gold wire in some of our packages with copper wire technology will not only improve our profitability but will also enable us to provide more value to our customers by providing lower cost solutions, which could enhance our competitiveness and market share. We are currently the industry leader in terms of copper wire capacity. We thus plan to capitalize on the overall industry trend of copper conversion by maintaining our leadership and focusing on integrating copper wire into a wider range of traditional leadframe-based packages and higher end substrate-based packages.

 

We expect to focus our packaging and testing on providing cost competitive services through better management of capacity utilization and efficiency improvements and offer our services on a large scale with the intention of driving more integrated device manufacturer outsourcing in the long-run.

 

We evaluate acquisition and joint venture opportunities on the basis of access to new markets and technology, the enhancement of our production capacity, improvement of research and development capabilities, economies of scale and management resources, and closer proximity to existing and potential customers. For example, we acquired controlling interests in Universal Scientific in 2010 to broaden our offerings to include integrated solutions for electronic manufacturing services in relation to computers, peripherals, communications, industrial, automotive, and storage and server applications. In addition, in May 2015, we entered into a joint venture agreement with TDK Corporation to invest in ASEEE to further expand our business in embedded substrates. We acquired 779,000,000 common shares (including common shares represented by American depositary shares) of SPIL through the Initial SPIL Tender Offer in September 2015 and attempted to acquire an additional 770,000,000 common shares (including common shares represented by American depositary shares) of SPIL on December 29, 2015 through the Second SPIL Tender Offer. Notwithstanding the failure of the Second SPIL Tender Offer, we announced in March 2016 that we will continue to seek control of SPIL, with the purpose of effecting the SPIL Merger.

 

Continue to Leverage Our Presence in Key Centers of Semiconductor and Electronics Manufacturing

 

We intend to continue leveraging our presence in key centers of semiconductor and electronics manufacturing to further grow our business. We have significant packaging, testing and electronic manufacturing services operations in Taiwan, currently one of the leading centers for outsourced semiconductor and electronics manufacturing in the world. This presence enables our engineers to work closely with our customers as well as wafer foundries and other providers of complementary semiconductor and electronic manufacturing services early in the design process, enhances our responsiveness to the requirements of our customers and shortens production cycles. In addition, as a turnkey service provider, we are able to offer our products to our customers and complementary service providers within relatively close geographic proximity. Besides our current operations in Taiwan, we intend to expand our operations in our other subsidiaries.

 

We have primary operations in the following locations besides our locations in Taiwan:

 

· PRC — a fast-growing market for semiconductor and electronics manufacturing in the world;

 

· Korea — an important center for the manufacturing of memory and communications devices;

 

· Malaysia and Singapore — a center for outsourced semiconductor manufacturing in Southeast Asia;

 

· Silicon Valley in California — the preeminent center for semiconductor design, with a concentration of fabless customers; and

 

36

· Japan — an emerging market for packaging and testing outsourcing services as Japanese integrated device manufacturers increasingly outsource their semiconductor manufacturing requirements.

 

Strengthen and Develop Strategic Relationships with Our Customers and Providers of Complementary Semiconductor Manufacturing Services

 

We intend to strengthen existing and develop new strategic relationships with our customers and providers of other complementary semiconductor manufacturing services, such as wafer foundries, as well as equipment vendors, raw material suppliers and technology research institutes, in order to offer our customers total semiconductor manufacturing solutions covering all stages of the manufacturing of their products from design to shipment. In addition, we are working with our customers to co-develop new packaging technologies and designs.

 

Since 1997, we have maintained a strategic alliance with TSMC, currently one of the world’s largest dedicated semiconductor foundries, which designates us as their non-exclusive preferred provider of packaging and testing services for semiconductors manufactured by TSMC. Through our strategic alliance with and close geographic proximity to TSMC, we are able to offer our customers a total semiconductor manufacturing solution that includes access to foundry services in addition to our packaging, testing and direct shipment services.

 

Principal Products and Services

 

We offer a broad range of semiconductor packaging and testing services. In addition, we have provided electronic manufacturing services since our acquisition of a controlling interest in Universal Scientific in February 2010. Our package types generally employ either leadframes or substrates as interconnect materials. The semiconductors we package are used in a wide range of end-use applications, including communications, computing, consumer electronics, industrial, automotive and other applications. Our testing services include front-end engineering testing, which is performed during and following the initial circuit design stage of the semiconductor manufacturing process, wafer probe, final testing and other related semiconductor testing services. We focus on packaging and testing semiconductors. We offer our customers turnkey services, which consist of packaging, testing and direct shipment of semiconductors to end users designated by our customers. Our electronic manufacturing services are used in a wide range of end-use applications, including, but not limited to, computers, peripherals, communications, industrial applications, automotive electronics, and storage and server applications. In 2015, our revenues generated from packaging, testing and electronic manufacturing services accounted for 41.2%, 8.9% and 48.8% of our operating revenues, respectively.

 

Packaging Services

 

We offer a broad range of package types to meet the requirements of our customers, including flip-chip BGA, flip-chip CSP, aCSP (advanced chip scale packages), quad flat packages (QFP), thin quad flat packages (TQFP), bump chip carrier (BCC), quad flat no-lead (QFN) packages, aQFN (advanced QFN) and Plastic BGA. In addition, we provide 3D chip packages, such as MAP POP (package on package) and aMAP POP (advanced, laser ablation type), which enable our customers to mount packages more easily. We also offer other forms of stacked die solutions in different package types, e.g., stacked die QFN, hybrid BGAs containing stacked wire bond and FC die. Meanwhile, we are developing the cost-effective solutions to 3D packages, such 2.1D (substrate layer modification) and 2.5D (substrate interposer) to fulfill current low cost and high performance requirement in parallel with 3D packages with TSV (Through Silicon Via) technology. 2.1D and 2.5D are the low-tier package solutions for 3D packages and use substrate technology on top layer to connect to top package. 2.5D technology uses substrate interposer for finer pitch requirement on 3D packages for advanced wafer node in reducing the overall 3D package cost. Our first product has been a CMOS image sensor with TSV to minimize the form factor. In addition, to meet current trends toward low cost solutions, we provide copper wire bonding solutions which can be applied to current gold wire products. Furthermore, we also provide, with high volume manufacturing experience, silver wire bonding with current focus on FCCSP Hybrid packages. We believe we are among the leaders in such packaging processes and technologies and are well positioned to lead the technology migration in the semiconductor packaging industry.

 

We have been engaging in the production of module-based solutions, including Wi-Fi modules and RF modules, for a number of years. Building on our experience with module based packaging solutions, we provide customized module services with SiP solutions, to meet more complex marketing requirements.

 

 

37

We also provide automotive product development and production using copper wire in our services to customers. Having accumulated production experience in using gold wire for automotive devices over several years, we collaborate with certain customers to develop and release copper wire for advanced wafer process (CMOS065) in automotive devices (various QFP packages) based on AEC Q-100 Grade 0 criteria. With our success in CMOS065 automotive products, we are continuously supported by the same customers for 40nm automotive product (copper wire in BGA) development that will fulfill criteria in addition to Grade 0. In addition to wirebonding packaging for automotive products, we have begun early development for the 28nm wafer process with hybrid packaging structure (FC bonding + wirebonding). The copper pillar process will be introduced for flip-chip on wafer form and process wirebonding. In addition, we also offer the FOWLP solution for radar products according to requests from some tier 1 customers.

 

Our production also supports MEMS sensors by applying substrate LGA package structure. The small form factor is down to 2x2 device outline, and by applying chip to wafer structure (TSV+wirebonding), we can further reduce this to 1.25x1.5 package size. By collaborating with worldwide tier 1 MEMS customers, we can build our capability in motion sensor assembly and develop our knowledge of environment sensors.

 

Advanced Packages. The semiconductor packaging industry has evolved to meet the requirements of high-performance electronics products. We believe that there will continue to be growing demand for packaging solutions with increased input/output density, smaller size and better heat dissipation characteristic.

 

We have focused on developing our capabilities in certain packaging solutions, such as aCSP (Wafer level chip scale package), flip-chip BGA, Heat-Spreader FCBGA, flip-chip CSP, Hybrid FCCSP (Flip-Chip + W/B), Flip-Chip PiP (Package in Package), Flip-Chip PoP (Package on Package), aS 3™ (Advanced Single Sided Substrate), Fan-Out Wafer Level Packaging, SESUB and 2.5D. Flip-chip BGA technology replaces wire bonding with wafer bumping for interconnections within the package. Wafer bumping involves the placing of tiny solder balls, instead of wires, on top of dies for connection to substrates. As compared with more traditional packages, which allow input/output connection only on the boundaries of the dies, flip-chip packages significantly enhance the input/output flow by allowing input/output connection over the entire surface of the dies.

 

Chip scale packages typically have an area no greater than 1.2 times of the silicon die. For wafer level package, the electrical connections are plated or printed directly onto the wafer itself, resulting in a package very close to the size of the silicon die. Wafer-level packages do not include an interposer so they are unlike substrate-based packages, where the die is usually mounted on an interposer which contains electrical connections in the form of small bumps or balls.

 

aEASI (Advance Embedded Assembly Substrate Integration) is a technology which allows the embedding thin chips into substrate build-up layers. aEASI can be used in various technologies tailored to clients’ demand, such as package solution of miniaturization, and has also been proven to have better electrical/thermal performance. It also provides flexibility in design (such as for MicroSiP) and the electrical contacts to the chips are realized by
laser-drilled and metallized micro-vias to replace traditional wire bonding process. aEASI are mainly used in power management applications.

 

WL MEMs (Wafer-Level MEMs) is advanced assembly for MEMs in wafer-level type instead of current LGA or leadframe types and to use TSV or chip to wafer technology. WL MEMs are mainly used in applications such as pressure, temperature, humidity and gyroscope sensors, among others.

 

HB POP (High-Bandwidth Package on Package) packages are new package structure that have the characteristics to extend higher top side ball/lead counts to gain better performance.

 

We provide numerous technologies to meet various customer demands. The following table sets forth our principal advanced packages.

 

38

Package Types

Number of Leads

Description

End-Use Applications

Wafer Level Chip Scale Package (aCSP) 6-120 A wafer level chip scale package that can be directly attached to the circuit board. Provides shortest electrical path from the die pad to the circuit board, thereby enhancing electrical performance. Cellular phones, personal digital assistants, watches, MP3 players, digital cameras and camcorders.
Flip-Chip Chip Scale Package (FC-CSP, a- fc CSP) 16-750 A lightweight package with a small, thin profile that provides better protection for chips and better solder joint reliability than other comparable package types. RFICs and memory ICs such as digital cameras, DVDs, devices that utilize WiMAX technology, cellular phones, GPS devices and personal computer peripherals.
Flip-Chip PiP (Package in Package) (FC-CSP PiP) 500-980 System In Package for Flip-Chip+Memory die inside with a better electrical performance package types. Application processor for smartphone, data modern on portable devices.
Flip-Chip PoP (Package on Package) (FC-CSP PoP) 500-1100 SOC (System On Chip) die for Assembly to Bottom package and then applied for Memory die on top inside with a better electrical performance package types. High-tier application processor for smartphone, data modern on portable devices.
Flip-Chip BGA/ HF FCBGA(High Performance / Heat Spreader / FCBGA) 16-2916 Using advanced interconnect technology, the flip-chip BGA packages allow higher density of input/output connection over the entire surface of the dies. HF FCBGA is designed for semiconductor high-performance requirement of high density of interconnects. High-performance networking, graphics and server and data center processor applications.
Hybrid (Flip-Chip and Wire Bonding) 49-608 A package technology that stacks a die on top of a probed good die to integrate ASIC and memory (flash, SRAM and DDR) into one package and interconnects them with wire bonding and molding. This technology suffers from known good die issues (i.e., one bad die will ruin the entire module). Rework is also not an option in hybrid packages. Digital cameras, smartphones, bluetooth applications and personal digital assistants.
aS3 up to 300 Ultra-thin profile package which is excellent on middle pin count alternative solution;
standard BT material and manufacturing equipment; and lower cost via on pad.
High I/O and short wire length package solution in high performance requirement.

 

39

Package Types

Number of Leads

Description

End-Use Applications

Integrated Passive Device (IPD) less than 20 IPD can provide high performance/high Q-factor inductor and single/double layers for lower cost and turnkey solutions and integrate passives into one IPD chip. IPD requires less involvement in the Surface Mount Technology (“SMT”) process, and is considered to be more compatible with current assembly process and suitable for all package solutions. Cellular phones, Wi-Fi module, TV, personal digital assistants.

 

IC Wirebonding. We provide IC wirebonding, including leadframe-based packages and substrate-based packages. Leadframe-based packages are packaged by connecting the die, using wire bonders, to the leadframe with gold wire or copper wire. As packaging technology improves, the number of leads per package increases. In addition, improvements in leadframe-based packages have reduced the footprint of the package on the circuit board and improved the electrical performance of the package. To have higher interconnected density and better electrical performance, semiconductor packages have evolved from leadframe-based packages to substrate-based packages. The key differences of these package types are: the size of the package; the density of electrical connections the package can support; flexibility at lower costs; the thermal and electrical characteristics of the package; and environmentally conscious designs. Substrate-based packages generally employ the BGA design. Whereas traditional leadframe technology places the electrical connection around the perimeter of the package, the BGA package type places the electrical connection at the bottom of the package surface in the form of small bumps or balls. These small bumps or balls are typically distributed evenly across the bottom surface of the package, allowing greater distance between individual leads and higher pin-counts. Our expertise in BGA packages also includes capabilities in stacked-die BGA, which assembles multiple dies into a single package.

 

3D packaging has recently gained a lot of publicity because of the advent of TSV (Through Silicon Via) based chip stacking. Chip stacking has been implemented for many years, albeit without TSVs. Wire bond die is routinely stacked on leadframes as well as BGA substrates. A more recent implementation is the stacking of packages as package on package (PoP) and the more specialized package in package (PiP). ASE has advanced PoP by the invention of aMAPPoP which provides the package interconnects by exposing a molded in solder ball with a laser via. Aside from being cost effective due to block molding, this PoP also has much lower warpage, greatly improving the stacking yield.

 

 

40

The following table sets forth our principal IC wirebonding packages.

 

Package Types 

Number of Leads 

Description 

End-Use Applications 

Advanced Quad Flat No-Lead Package (aQFN) 104-276 aQFN allows for leadless, multi-row and fine-pitch leadframe packaging and is characterized by enhanced thermal and electrical performance. aQFN is a cost-effective packaging solution due to its cost-effective materials and simpler packaging process. Telecommunications products, wireless local access networks, personal digital assistants, digital cameras, low to medium lead count packaging information appliances.
Quad Flat Package (QFP)/Thin Quad Flat Package (TQFP) 44-256 Designed for advanced processors and controllers, application-specific integrated circuits and digital signal processors. Multimedia applications, cellular phones, personal computers, automotive and industrial products, hard disk drives, communication boards such as ethernet, integrated services digital networks and notebook computers.
Quad Flat No-Lead Package (QFN)/ Dual-Row QFN (DR-QFN)/ Microchip Carrier (MCC) 12-160 QFN/DRQFN, also known as types of MCC, uses half-encapsulation technology to expose the rear side of the die pad and the tiny fingers, which are used to connect the chip and bonding wire with printed circuit boards. Dual-Row is to increase the lead counts for product requirement. Cellular phones, wireless local access networks, personal digital assistant devices and digital cameras.
Bump Chip Carrier (BCC) 16-156 BCC packages use plating metal pads to connect with printed circuit boards, creating enhanced thermal and electrical performance. Cellular phones, wireless local access networks, personal digital assistant devices and digital cameras.
Small Outline Plastic Package (SOP)/Thin Small Outline Plastic Package (TSOP) 8-56 Designed for memory devices including static random access memory, or SRAM, dynamic random access memory, or DRAM, fast static RAM, also called FSRAM, and flash memory devices. Consumer audio/video and entertainment products, cordless telephones, pagers, fax machines, printers, copiers, personal computer peripherals, automotive parts, telecommunications products, recordable optical disks and hard disk drives.
Small Outline Plastic J-Bend Package (SOJ) 20-44 Designed for memory and low pin-count applications. DRAM memory devices, microcontrollers, digital analog conversions and audio/video applications.
Plastic Leaded Chip Carrier (PLCC) 28-84 Designed for applications that do not require low-profile packages with high density of interconnects. Personal computers, scanners, electronic games and monitors.
Plastic Dual In-line Package (PDIP) 8-64 Designed for consumer electronic products. Telephones, televisions, audio/video applications and computer peripherals.

41

Package Types 

Number of Leads 

Description 

End-Use Applications 

Plastic BGA 119-1520 Designed for semiconductors which require the enhanced performance provided by plastic BGA, including personal computer chipsets, graphic controllers and microprocessors, application-specific integrated circuits, digital signal processors and memory devices. Telecommunications products, global positioning systems, notebook computers, disk drives and video cameras.
Stacked-Die BGA 120-1520 Combination of multiple dies in a single package enables package to have multiple functions within a small surface area. Telecommunications products, local area networks, graphics processor applications, digital cameras and pagers.
Package-on-Package (POP, aMAP POP) 136-904 This technology places one package on top of another to integrate different functionalities while maintaining a compact size. It offers procurement flexibility, low cost of ownership, better total system cost and faster time to market. Designers typically use the topmost package for memory applications and the bottommost package for ASICs. By using this technology, the memory known good die issue can be mitigated and the development cycle time and cost can be reduced. Cellular phones, personal digital assistants and system boards.
Land Grid Array (LGA) 10-72 Leadless package which is essentially a BGA package without the solder balls. Based on laminate substrate, land grid array packages allow flexible routing and are capable of multichip module functions. High frequency integrated circuits such as wireless communications products, computers servers, personal computer peripherals and MEMS sensors.

 

 

SiP and Modules . We assemble SiP products, which involve the integration of more than one chip into the same package. As miniaturization requirements for electronic devices increase, smaller and lighter SiPs are garnering much attention within the industry. Wafer level integration-passive device technology has become increasingly important. Passive devices such as inductors, capacitors, resistors, filters and diplexers are those components occupying the largest area in printed circuit boards; therefore, miniaturization and integration is key to SiPs. This can be achieved through integrating passive components on an individual substrate using a thin film process known as MCM-D or IPD (Integrated Passive Device). The IPD can then be used as a package substrate or interposer for SiP. This manufacturing method will enhance product performance and also reduce overall costs. The extension of our current RDL (Redistribution) process can be used to build high quality factor (Q) inductor and RF circuits on top of CMOS (Complementary Metal–Oxide–Semiconductor) wafers. IPD is an enabling technology for SiP. It can be used in the following three approaches to enhance product performance: several solutions to replace discrete components such as Balun and Filter, or to integrate certain passive components and act as interposer, or to replace PWB and act as a substrate of the module. We have the ability to offer any of the packaging methodologies related to the above technologies. In addition, we also leverage some of our SMT-based technologies, such as compartment shielding, double sided module and antenna integration.

 

42

We also offer module assembly services, which combine one or more packaged semiconductors with other components in an integrated module to enable increased functionality, typically using automated SMT machines and other machinery and equipment for system-level assembly. End-use applications for modules include cellular phones, wireless LAN applications, Bluetooth applications, camera modules, automotive applications, toys, networking, storage, and power management.

 

Interconnect Materials . Interconnect materials connect the input/output on the semiconductor dies to the printed circuit board. Interconnect materials include substrate, which is a multi-layer miniature printed circuit board, and is an important element of the electrical characteristics and overall performance of semiconductors. We produce substrates for use in our packaging operations.

 

The demand for higher performance semiconductors in smaller packages will continue to spur the development of IC substrates that can support the advancement in circuit design and fabrication. As a result, we believe that the market for substrates will grow and the cost of substrates as a percentage of the total packaging process will increase. In the past, substrates we designed for our customers were produced by independent substrate manufacturers. Since 1997, we have been designing and producing a portion of our interconnect materials in-house. In 2015, our interconnect materials operations supplied approximately 27.2% of our consolidated substrate requirements by value.

 

The following table sets forth, for the periods indicated, the percentage of our packaging revenues accounted for by each principal type of packaging products or services.

 

    Year Ended December 31,
    2013   2014   2015
             
Advanced packaging (1)     26.7 %     25.0 %     27.1 %
IC Wirebonding (2)     62.5       64.4       61.9  
Discrete and other     10.8       10.6       11.0  
Total     100.0 %     100.0 %     100.0 %

____________________ __

(1) Bumping, flip chip, wafer level chip scale and SiP package.

 

(2) Includes leadframe-based packages such as QFP/TQFP, QFN/MCC and PLCC/PDIP and substrate-based packages, such as various BGA package types and LGA.

 

Testing Services

 

We provide a complete range of semiconductor testing services, including front-end engineering testing, wafer probing, final testing of logic/mixed-signal/RF/(2.5D/3D) module and SiP/ MEMS/Discrete and other test-related services.

 

The testing of semiconductors requires technical expertise and knowledge of the specific applications and functions of the semiconductors tested as well as the testing equipment utilized. We believe that our testing services employ technology and expertise which are among the most sophisticated in the semiconductor industry. In addition to maintaining different types of testing equipment, which enables us to test a variety of semiconductor functions, we work closely with our customers to design effective testing solutions on multiple equipment platforms for particular semiconductors.

 

In recent years, complex, high-performance logic/mixed-signal/RF/(2.5D/3D) module and SiP/MEMS semiconductors have accounted for an increasing portion of our testing revenues.

 

Front-End Engineering Testing . We provide front-end engineering testing services, including customized software development, electrical design validation, and reliability and failure analysis.

 

· Customized Software Development . Test engineers develop customized software to test the semiconductors using our equipment. Customized software, developed on specific test platforms, is required to test the conformity of each particular semiconductor type to its unique functionality and specification.

 

43

· Electrical Design Validation . A prototype of the designed semiconductor is subjected to electrical tests using advanced test equipment and customized software. These tests assess whether the prototype semiconductor complies with a variety of different operating specifications, including functionality, frequency, voltage, current, timing and temperature range.

 

· Reliability Analysis . Reliability analysis is designed to assess the long-term reliability of the semiconductor and its suitability of use for intended applications. Reliability testing can include “burn-in” services, which electrically stress a device, usually at high temperature and voltage, for a period of time long enough to cause the failure of marginal devices.

 

· Failure Analysis . In the event that the prototype semiconductor does not function to specifications during either the electrical design validation or reliability testing processes, it is typically subjected to failure analysis to determine the cause of the failure to perform as anticipated. As part of this analysis, the prototype semiconductor may be subjected to a variety of analyses, including electron beam probing and electrical testing.

 

Wafer Probing . Wafer probing is the step immediately before the packaging of semiconductors and involves visual inspection and electrical testing of the processed wafer for defects to ensure that it meets our customers’ specifications. Wafer probing services require expertise and testing equipment similar to that used in final testing, and most of our testers can also be used for wafer probing.

 

Logic/Mixed-signal/RF/(2.5D/3D) module and SiP/Discrete Final Testing . We conduct final tests of a wide variety of logic/mixed-signal/RF/(2.5D/3D) module and SiP/ MEMS /discrete semiconductors, with the number of leads or bumps ranging from the single digits to over ten thousand and operating frequencies of over 12 Gbps for digital semiconductors and 12 GHz for radio frequency semiconductors, which are at the high end of the range for the industry. The products we test include semiconductors used for wired, wireless and mobile communications, home entertainment and personal computer applications, as well as a variety of consumer and application-specific integrated circuits for various specialized applications.

 

Other Test-Related Services . We provide a broad range of additional test-related services, such as:

 

· Electric Interface Board and Mechanical Test Tool Design . Process of designing individualized testing apparatuses such as test load boards, sockets, handler change kits, and probe cards for unique semiconductor devices and packages.

 

· Program Conversion . Process of converting a program from one test platform to different test platforms to reduce testing costs or optimize testing capacity.

 

· Program Efficiency Improvement . Process of optimizing the program code or increasing site count of parallel tests to improve testing throughout.

 

· Burn-in Testing . Burn-in testing is the process of electrically stressing a device, usually at high temperature and voltage, for a period of time to simulate the continuous use of the device to determine whether this use would cause the failure of marginal devices.

 

· Module and SiP Testing . We provide module and SiP testing through integrated bench solution or automatic test equipment to our customers with a complete solution with respect to finger print sensor module, camera module, wireless connectivity devices, global positioning system devices, personal navigation devices and digital video broadcasting devices.

 

· Tape and Reel . Process which involves transferring semiconductors from a tray or tube into a tape-like carrier for shipment to customers.

 

Drop Shipment Services . We offer drop shipment services for shipment of semiconductors directly to end users designated by our customers. Drop shipment services are provided mostly in conjunction with logic/mixed-signal/RF/3D IC/discrete testing. We provide drop shipment services to a significant percentage of our testing customers. A substantial portion of our customers at each of our facilities have qualified these facilities for drop shipment services. Since drop shipment eliminates the additional step of inspection by the customer before shipment to the end user, quality of service is a key consideration. We believe that our ability to successfully execute our full range of services, including drop shipment services, is an important factor in maintaining existing customers as well as attracting new customers.

 

44

The following table sets forth, for the periods indicated, the percentage of our testing revenues accounted for by each type of testing service.

 

    Year Ended December 31,
    2013   2014   2015
Testing Services:                        
Front-end engineering testing     2.5 %     2.9 %     4.2 %
Wafer probing     19.5       20.5       20.1  
Final testing     78.0       76.6       75.7  
Total     100.0 %     100.0 %     100.0 %

 

Electronic Manufacturing Services . Since our acquisition of a controlling interest in Universal Scientific in February 2010, we also provide integrated solutions for electronic manufacturing services in relation to computers, peripherals, communications, industrial, automotive, and storage and server applications. The key products and services we offer to our customers, for instance, include:

 

· Computers: motherboards for server & desktop PC; peripheral; port replicator; network attached storage; and technical services;

 

· Communications: Wi-Fi; SiP;

 

· Consumer products: control boards for flat panel devices; SiP;

 

· Automotive electronics: automotive electronic manufacturing services; car LED lighting; regulator/rectifier; and

 

· Industrial products: point-of-sale systems; smart handheld devices.

 

Seasonality

 

See “Item 5. Operating and Financial Review and Prospects—Operating Results and Trend Information—Quarterly Operating Revenues, Gross Profit and Gross Margin.”

 

Sales and Marketing

 

Sales and Marketing Presence

 

We maintain sales and marketing offices in Taiwan, the United States, Belgium, Singapore, the PRC, Korea, Malaysia, Japan and a number of other countries. We also have sales representatives operating in certain other countries in which we do not have offices. Our sales and marketing offices in Taiwan are located in Hsinchu and Kaohsiung. We conduct marketing research through our customer service personnel and through our relationships with our customers and suppliers to keep abreast of market trends and developments. We also provide advice in the area of production process technology to our major customers planning the introduction of new products. In placing orders with us, our customers specify which of our facilities these orders will go to. Our customers conduct separate qualification and correlation processes for each of our facilities that they use. See “—Qualification and Correlation by Customers.”

 

Customers

 

Our five largest customers together accounted for approximately 37.2%, 40.3% and 48.2% of our operating revenues in 2013, 2014 and 2015, respectively. One customer accounted for more than 10.0% of our operating revenues in 2013, 2014 and 2015.

 

45

We package and test for our customers a wide range of products with end-use applications in the communications, computing, and consumer electronics/industrial/automotive sectors. The following table sets forth a breakdown of the percentage of our operating revenues generated from our packaging and testing services, for the periods indicated, by the principal end-use applications of the products that we packaged and tested.

 

    Year Ended December 31,
    2013   2014   2015
Communications     54.6 %     53.3 %     54.7 %
Computing     11.0       11.6       11.1  
Consumer electronics/industrial/automotive/other     34.4       35.1       34.2  
Total     100.0 %     100.0 %     100.0 %

 

In addition, we have provided electronic manufacturing services since our acquisition of the controlling interest of Universal Scientific in February 2010. Our electronic manufacturing services provide a wide range of products with end-use applications. The following table sets forth a breakdown of the percentage of our operating revenues generated from our electronic manufacturing services for the periods indicated by the principal end-use applications.

 

    Year Ended December 31,
    2013   2014   2015
Communications     45.4 %     55.6 %     53.2 %
Computing     21.7       18.0       14.3  
Consumer electronics     11.7       8.9       18.7  
Industrial     12.8       10.3       8.1  
Automotive     7.4       6.3       4.9  
Other     1.0       0.9       0.8  
Total     100.0 %     100.0 %     100.0 %

 

We categorize our operating revenues geographically based on the country in which the customer is headquartered. The following table sets forth, for the periods indicated, the percentage breakdown by geographic regions of our operating revenues.

 

    Year Ended December 31,
    2013   2014   2015
United States     65.4 %     67.8 %     72.6 %
Taiwan     14.2       14.3       11.5  
Asia     10.8       9.4       8.1  
Europe     9.3       8.1       7.3  
Other     0.3       0.4       0.5  
Total     100.0 %     100.0 %     100.0 %

 

Qualification and Correlation by Customers

 

Customers generally require that our facilities undergo a stringent qualification process during which the customer evaluates our operations and production processes, including engineering, delivery control and testing capabilities. The qualification process typically takes up to several weeks, but can take longer depending on the requirements of the customer. In the case of our testing operations, after we have been qualified by a customer and before the customer delivers semiconductors to us for testing in volume, a process known as correlation is undertaken. During the correlation process, the customer provides us with sample semiconductors to be tested and either provides us with the test program or requests that we develop a conversion program. In some cases, the customer also provides us with a data log of results of any testing of the semiconductors that the customer may have conducted previously. The correlation process typically takes up to two weeks, but can take longer depending on the requirements of the customer. We believe our ability to provide turnkey services reduces the amount of time spent by our customers in the qualification and correlation process. As a result, customers utilizing our turnkey services are able to achieve shorter production cycles.

 

46

Pricing

 

We price our packaging services and electronic manufacturing services, taking into account the actual costs, with reference to prevailing market prices. We price our testing services primarily on the basis of the amount of time, measured in central processing unit seconds, taken by the automated testing equipment to execute the test programs specific to the products being tested, as well as the cost of the equipment, with reference to prevailing market prices. Prices for our packaging, testing and electronic manufacturing services are confirmed at the time orders are received from customers, which is typically several weeks before delivery.

 

Raw Materials and Suppliers

 

Packaging

 

The principal raw materials used in our packaging processes are interconnect materials such as leadframes and substrates, gold wire and molding compound. The silicon die, which is the functional unit of the semiconductor to be packaged, is supplied in the form of silicon wafers. Each silicon wafer contains a number of identical dies. We receive the wafers from the customers or the foundries on a consignment basis. Consequently, we generally do not incur inventory costs relating to the silicon wafers used in our packaging process.

 

We do not maintain large inventories of leadframes, substrates, gold wire or molding compound, but generally maintain sufficient stock of each principal raw material based on blanket orders and rolling forecasts of near-term requirements received from customers. In addition, several of our principal suppliers dedicate portions of their inventories as reserves to meet our production requirements. However, shortages in the supply of materials experienced by the semiconductor industry have in the past resulted in occasional price adjustments and delivery delays. For example, in the first half of 2000, the industry experienced a shortage in the supply of IC substrates used in BGA packages, which, at the time, were only available from a limited number of suppliers located primarily in Japan. In order to reduce the adverse impact caused by the price fluctuations of raw materials, we have developed substitute raw materials, such as copper, the cost of which is much cheaper than that of gold. However, we cannot guarantee that we will not experience shortages or price increase in the near future or that we will be able to obtain adequate supplies of raw materials in a timely manner and at a reasonable price or to develop any substitute raw materials. In the event of a shortage and/or price increase, we generally inform our customers and work together to accommodate changes in delivery schedules and/or the price increase of raw materials.

 

We produce substrates for use in our packaging operations. In 2015, our interconnect materials operations supplied approximately 27.2% of our consolidated substrate requirements by value. See “—Principal Products and Services—Interconnect Materials.”

 

As a result of the “Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment,” or RoHS, which became effective on July 1, 2006, we have adjusted our purchases of raw materials and our production processes in order to use raw materials that comply with this legislation for part of our production. This legislation restricts the use in the European Union, or EU, of certain substances the EU deems harmful to consumers, which includes certain grades of molding compounds, solder and other raw materials that are used in our products. Manufacturers of electrical and electronic equipment must comply with this legislation in order to sell their products in an EU member state. Any failure by us to comply with regulatory environmental standards such as Directive 2002/95/EC may have a material adverse effect on our results of operations.

 

Testing

 

For the functional and burn-in testing of semiconductors, no other raw materials are needed. However, we often design and outsource the manufacturing of test interface products such as load boards, probe cards and burn-in boards.

 

Electronic Manufacturing Services

 

Our manufacturing processes use many raw materials in our electronic manufacturing services. For 2015, raw materials costs accounted for 78.4% of our operating revenues from electronic manufacturing services. Our principal raw materials include, among others, printed circuit boards, integrated chips, ink, semiconductor devices, computer peripherals and related accessories and electronic components. Our principal raw materials varied in the past, depending on the end-use products we provided.

 

47

To ensure quality, on-time delivery and pricing competitiveness, we have established both a standardized supplier assessment system and an evaluation mechanism, continued to maintain close working relationships with our suppliers and jointly created a stable and sustainable supply chain. In addition, we adjusted the procurement strategy in line with industry trends as well as the nature of raw materials and decentralized the sources of raw materials to lower our supply concentration risk. However, we cannot assure you that we will not experience any shortages or price increases in the near future. See “Item 3. Key Information—Risk Factors—Risks Relating to Our Business—Our revenues and profitability may decline if we are unable to obtain adequate supplies of raw materials in a timely manner and at a reasonable price.”

 

Equipment

 

Packaging

 

Wire bonding process is important for routing signal out of die to the system for the IC wire-bonding solutions. Thus, wire bonder is the important equipment used for such process. As products become finer and finer pitch, bumping process will replace wire bonding process for the signal routing purpose. Thus, sputter and plater will be the crucial equipment for this type of process.

 

Wire bonders connect the input/output terminals on the silicon die using extremely fine gold or copper wire to leads on leadframes or substrates. Typically, a wire bonder may be used, with minor modifications, for the packaging of different products. As of February 29, 2016, we operated an aggregate of 15,592 wire bonders, of which 15,478 were fine-pitch wire bonders. As of the same date, 25 of the wire bonders operated by us were consigned by customers and none were leased under operating leases. For the packaging of certain types of substrate-based packages, die bonders are used in place of wire bonders. The number of bonders at a given facility is commonly used as a measure of the packaging capacity of the facility. In addition to bonders, we maintain a variety of other types of packaging equipment, such as wafer grind, wafer mount, wafer saw, automated molding machines, laser markers, solder plate, pad printers, dejunkers, trimmers, formers, substrate saws and scanners. We purchase our packaging equipment from major international manufactures, including Allring Tech Co., Ltd, Disco Corporation, BE Semiconductor Industries N.V. and Kulicke & Soffa Industries, Inc..

 

Testing

 

Testing equipment is the most capital intensive component of the testing process. We generally seek to purchase testers from different suppliers with similar functionality and the ability to test a variety of different semiconductors. We purchase testers from major international manufacturers, including Teradyne, Inc., Advantest Ltd., LTX-Credence Corporation, Seiko Epson and Tokyo Electron Limited. Upon acquisition of new testers, we install, configure, calibrate, perform burn-in diagnostic tests on and establish parameters for the testers based on the anticipated requirements of existing and potential customers and considerations relating to market trends. As of February 29, 2016, we operated an aggregate of 3,418 testers, of which 945 were consigned by customers and 84 were leased under operating leases. In addition to testers, we maintain a variety of other types of testing equipment, such as automated handlers and probers (special handlers for wafer probing), scanners, reformers and computer workstations for use in software development. Each tester may be attached to a handler or prober. Handlers attach to testers and transport individual packaged semiconductor to the tester interface. Probers similarly attach to the tester and align each individual die on a wafer with the interface to the tester.

 

For the majority of our testing equipment, we often base our purchases on prior discussions with our customers about their forecast requirements. The balance consists of testing equipment on consignment from customers and which are dedicated exclusively to the testing of these customers’ specific products.

 

Test programs, which consist of the software that drives the testing of specific semiconductors, are written for a specific testing platform. We sometimes perform test program conversions that enable us to test semiconductors on multiple test platforms. This portability between testers enables us to allocate semiconductors tested across our available test capabilities and thereby improve capacity utilization rates. In cases where a customer requires the testing of a semiconductor product that is not yet fully developed, the customer may provide computer workstations to us to test specific functions. In cases where a customer has specified testing equipment that was not widely applicable to other products that we test, we have required the customer to furnish the equipment on a consignment basis.

 

48

Electronic Manufacturing Services

 

The SMT assembly line is the key facility of our electronic manufacturing operations, and generally includes a printer and one or two high-speed mounters and/or a multi-function mounter. The SMT assembly process primarily consists of the following three manufacturing steps: (i) solder paste stencil printing, (ii) component placement and (iii) solder reflow. High-speed SMT assembly systems offer both economical and technical advantages that may reduce both production cost and time while meeting quality requirements. Thus, SMT has become the most popular assembly method for sophisticated electronic devices. We had 125 SMT lines as of February 29, 2016.

 

Intellectual Property

 

As of February 29, 2016, we held 2,012 Taiwan patents, 915 U.S. patents, 915 PRC patents and 17 patents in other countries related to various semiconductor packaging technologies and invention, utility and design on our electronic manufacturing services. In addition, we also filed several trademarks applications in Taiwan, the United States, China and the European Union. For example, “ASE”, “aCSP”, “ a-EASI”, “a-fcCSP”, “aQFN” “a-QFN”, “a-TiV”, “iSiP”, “iWLP” and “aSiM” have been registered in Taiwan.

 

We have also entered into various non-exclusive technology license agreements with other companies involved in the semiconductor manufacturing process, including Fujitsu Limited, Flip Chip International, L.L.C., Mitsui High-Tec, Inc., Infineon Technologies AG, SPIL and STATS Chippac Ltd. The technology we license from these companies includes solder bumping, redistribution, ultra CSP assembly, advanced QFN assembly, wafer level packaging and other technologies used in the production of package types, such as BCC, flip-chip BGA, film BGA, aQFN, Package-in-Package (PiP) and chip embedding. Our license agreements with Flip Chip International, L.L.C. and SPIL will not expire until the expiration of the patents licensed by the agreement. Our one license agreement with Infineon Technologies AG will expire on November 5, 2017, and another license agreement with Infineon Technologies AG will remain in effect until expiration of the Infineon’s patents licensed by the agreement. Our license agreement with Mitsui High-Tec, Inc. renews automatically each year, and our license agreement with Fujitsu Limited renews automatically each year unless the parties to the agreement agree otherwise. Our license agreement with STATS Chippac Ltd. will expire on December 31, 2016.

 

Our success depends in part on our ability to obtain, maintain and protect our patents, licenses and other intellectual property rights, including rights under our license agreements with third parties.

 

Quality Control

 

We believe that our process technology and reputation for high quality and reliable services have been important factors in attracting and retaining leading international semiconductor companies as customers for our services and/or products. We maintain a quality control staff at each of our facilities. Our quality control staff typically includes engineers, technicians and other employees who monitor the processes in order to ensure high quality. Our quality assurance systems impose strict process controls, statistical in-line monitors, supplier control, data review and management, quality controls and corrective action systems. Our quality control employees operate quality control stations along production lines, monitor clean room environments and follow up on quality through outgoing product inspection and interaction with customer service staff. We have established quality control systems that are designed to ensure high quality products/service to customers, high testing reliability and high production yields at our facilities. We also have established an environmental management system in order to ensure that we can comply with the environmental standards of our customers and the countries within which they operate. See “—Raw Materials and Suppliers—Packaging.” In addition, our facilities have been qualified by all of our major customers after satisfying stringent quality standards prescribed by these customers.

 

Our packaging and testing operations are undertaken in clean rooms where air purity, temperature and humidity are controlled. To ensure stability and integrity of our operations, we maintain clean rooms at our facilities that meet U.S. Federal Standard 209E class 1,000, 10,000 and 100,000 standards.

 

ISE Labs’ testing facilities in Fremont, California, are considered suitably equipped by the Defense Logistics Agency to perform the MIL-STD-883 tests on monolithic microcircuits in accordance with the requirements of military specification MIL-PRF-38535.

 

49

We have also obtained many certifications on our packaging, testing and interconnect materials facilities. Some of these certifications are required by some semiconductor manufacturers as a threshold indicator of company’s quality control standards or needed by many countries in connection with sales of industrial products. The table below sets forth the certifications we have for our packaging, testing and interconnect materials.

 

Location

ISO/TS 16949 (1)

ISO 9001 (2)

ISO 14001 (3)

ISO 17025 (4)

ISO 14064-1 (5)

IECQ HSPM
QC080000 (6)

Sony Green (7)

OHSAS 18001 (8)

TOSHMS and SA8000 (9)

ISO
50001 (10)

 Taiwan
 Shanghai, PRC      

 Suzhou/Kunshan/

 Weihai/ Wuxi, PRC

     
 Korea        
 Japan          
 Malaysia          
 Singapore          
 California              

_______________________

(1) ISO/TS16949 standards were originally created by the International Automotive Task Force in conjunction with the International Standards Organization, or ISO. These standards provide for continuous improvement with an emphasis on the prevention of defects and reduction of variation and waste in the supply chain.

 

(2) ISO 9001 quality standards, set by the ISO, are related to quality management systems and designed to help organizations ensure that they meet the needs of customers and other stakeholders while meeting statutory and regulatory requirements related to the product.

 

(3) ISO 14001 sets out the criteria for an environmental management system. It can be used by any organization that wants to improve resource efficiency, reduce waste and drive down costs.

 

(4) ISO 17025 is the main ISO standard used by testing and calibration laboratories.

 

(5) ISO 14064-1 standard is part of the ISO 14000 series of International Standards for environmental management. The ISO 14064 standard provides governments, businesses, regions and other organizations with a complementary set of tools for programs to quantify, monitor, report and verify greenhouse gas emissions.

 

(6) IECQ HSPM QC080000 is a certification designed to manage, reduce and eliminate hazardous substances.

 

(7) “Sony Green Partner” indicates our compliance with the “Sony Green Package” standard requirements.

 

(8) OHSAS 18001 is a set of standards designed upon collaboration with occupational health and safety experts and now offered by many certification organizations as an indication of compliance with certain standards for occupational health and safety.

 

(9) TOSHMS is the Taiwan Occupational and Health Management System. SA8000 is the most widely recognized global standard for managing human rights in the workspace.

 

(10) ISO50001 is a standard for an energy management system. It can be used by any organization that wants to reduce energy costs and use energy more efficiently.

  

Since our acquisition of a controlling interest in Universal Scientific in February 2010, we began providing electronic manufacturing services, for which we also have strict process controls. The table below sets forth the certifications we have obtained for our electronic manufacturing services facilities.

 

Location

ISO/TS 16949

ISO 9001

ISO 14001

ISO 14064-1

IECQ
QC
080000

TL 9000 (1)

OHSAS
18001

ISO 50001

ISO 17025

ISO 13485 (2)

 Taiwan      
 Shenzhen, PRC        
 Shanghai, PRC  
 Kunshan, PRC  
 Mexico          

__________________

(1) TL 9000 quality management system sets forth the supply chain quality requirements of the global communications industry.

 

(2) ISO 13485 quality management system sets forth the quality requirements for organizations that are required to consistently meet customers’ requirements and regulatory requirements in the medical devices and related services industry.

 

50

In addition, we have received various vendor awards from our customers for the quality of our products and services.

 

Competition

 

The global market for semiconductor packaging and testing markets is highly competitive. We face competition from a number of sources and integrated device manufacturers with in-house packaging and testing capabilities and fabless semiconductor design companies with their own in-house testing capabilities. Some of these integrated device manufacturers have commenced, or may commence, in-house packaging and testing operations in Asia. Substantially all of packaging and testing companies that compete with us have established operations in Taiwan and across the region.

 

Integrated device manufacturers that use our services continuously evaluate our performance against their own in-house packaging and testing capabilities. These integrated device manufacturers may have access to more sophisticated technologies and greater financial and other resources than we do. We believe, however, that we can offer greater efficiency at lower cost while maintaining equivalent or higher quality for several reasons. First, as we benefit from specialization and economies of scale by providing services to a large base of customers across a wide range of products, we are better able to reduce costs and shorten production cycles through high capacity utilization and process expertise. Second, as a result of our customer base and product offerings, our equipment generally has a longer useful life. Third, as a result of the continuing reduction of investments in in-house packaging and testing capacity and technology at integrated device manufacturers, we are better positioned to meet their packaging and testing requirements on a large scale.

 

Our packaging and testing business also faces actual and potential competition from companies at other levels of the supply chain, which have the financial resources and technical capabilities to enter and compete effectively with us. For example, TSMC has launched integrated fan-out (“InFO”) technology, which is scheduled to be put into mass production in 2016. InFO is expected to further intensify the competition in the packaging and testing industry.

 

In addition, we have provided electronic manufacturing services since our acquisition of a controlling interest in Universal Scientific in February 2010. As a result of this, we face significant competition from other electronic manufacturing services providers, such as Hon Hai Precision Ind. Co., Ltd., with comprehensive integration, wide geographic coverage and large production capabilities that enable them to achieve economies of scale. We believe, however, that we can still achieve satisfactory performance in the market given that we have been able to provide products with high quality and we are capable of designing new products by cooperating with our customers.

 

Environmental Matters

 

Our operations of packaging, interconnect materials and electronic manufacturing services generate environmental wastes, including gaseous chemical, liquid and solid industrial wastes. We have installed various types of anti-pollution equipment for the treatment of liquid and gaseous chemical waste generated at our facilities. We believe that we have adopted adequate anti-pollution measures for the effective maintenance of environmental protection standards that are consistent with industry practice in the countries in which our facilities are located. In addition, we believe we are in compliance in all material respects with present environmental laws and regulations applicable to our operations and facilities.

 

Furthermore, in order to demonstrate our commitment to environmental protection, in December 2013, our board of directors approved contributions to environmental protection efforts in Taiwan in a total amount of not less than NT$3,000.0 million, to be made in the next 30 years. For the years ended December 31, 2014 and 2015, we have made contributions in the amount of NT$100.0 million (US$3.0 million) each, respectively, through ASE Cultural and Educational Foundation to fund various environmental projects and our board of directors have resolved in a resolution in January 2016 to contribute NT$100.0 million (US$3.0 million) through ASE Cultural and Educational Foundation in environmental projects in 2016.

 

ASE Inc. Kaohsiung facility

 

Our operations involving wafer-level process and require wastewater treatment at our K7 Plant have been subject to scrutiny by the Kaohsiung City Environmental Protection Bureau and the Kaohsiung District Prosecutors office as a result of alleged wastewater disposal violations that occurred on October 1, 2013.

 

51

In December 2013, the Kaohsiung City Environmental Protection Bureau ordered us to suspend the operations at our K7 Plant’s wafer-level process where nickel was used for alleged wastewater discharge violations and imposed a NT$110.1 million fine against us. The NT$110.1 million fine was later reduced to NT$109.4 million as ordered by the Kaohsiung City Environmental Protection Bureau. In December 2014, the Kaohsiung City Environmental Protection Bureau lifted the suspension order and approved the full resumption of operations of our K7 Plant after ordering a series of examinations, hearings and trial runs. In September 2015, the fine was further reduced to NT$102.0 million (US$3.1 million) by the Kaohsiung City Environmental Protection Bureau and we received a refund of NT$7.3 million (US$0.2 million) in October 2015. Although our K7 Plant has resumed full operation, we may be subject to other new environmental claims, charges or investigations of our K7 Plant or other facilities that may cause similar or more severe interruptions to our business and operations.

 

With respect to the NT$102.0 million (US$3.1 million) administrative penalty imposed on us by the Kaohsiung City Environmental Protection Bureau, we appealed to the Kaohsiung High Administrative Court in August 2014 seeking to (i) revoke Kaohsiung City Government’s decision, (ii) lift the administrative penalty imposed on us and (iii) demand a refund of the administrative penalty. On March 22, 2016, the Kaohsiung High Administrative Court revoked Kaohsiung City Government’s decision and lifted the administrative penalty. Our demand for a refund of the fine was dismissed. We appealed to the Supreme Administrative Court on April 14, 2016 against the Kaohsiung High Administrative Court’s unfavorable ruling in dismissing a refund. The outcome of the proceeding cannot be predicted with certainty.

 

In connection with the same alleged violations at our K7 plant, in October 2014, the Kaohsiung District Court ruled that we were in violation of the ROC Waste Disposal Act and imposed on us a criminal penalty of NT$3.0 million. We appealed the case to the Taiwan High Court Kaohsiung District Branch in November 2014. In September 2015, the Taiwan High Court Kaohsiung District Branch overturned the decision made by Kaohsiung District Court and found the Company not guilty and repealed the criminal penalty imposed on the Company. The verdict was final and not appealable. For additional details of these administrative actions and judicial proceedings related to our K7 Plant see “Item 4. Information on the Company—Property, Plants and Equipment” and see “Item 8. Financial Information—Consolidated Statements and Other Financial Information—Legal Proceedings.” Defending against any of these pending or future actions will likely be costly and time-consuming and could significantly divert management’s efforts and resources.

 

Any future suspension of operations at K7 Plant or our other facilities may adversely affect our business, financial condition, results of operations and cash flows. See “Item 3. Key Information—Risk Factors—Risks Relating to Our Business—Any environmental claims or failure to comply with any present or future environmental regulations, as well as any fire or other industrial accident, may require us to spend additional funds and may materially and adversely affect our financial condition and results of operations.”

 

Our estimated environmental capital expenditures for 2016 will be approximately US$35.0 million. In order to demonstrate our commitment to fulfill our corporate social responsibility toward environmental protection, in December 2013, our board of directors approved contributions to environmental protection efforts in Taiwan in a total amount of not less than NT$3,000.0 million, at minimum, to be made in the next 30 years.

 

Insurance

 

We have insurance policies covering property damage and damage to our production facilities, buildings and machinery. In addition, we have insurance policies covering our public and product liabilities. Significant damage to any of our production facilities would have a material adverse effect on our results of operations.

 

We are not insured against the loss of key personnel.

 

52

ORGANIZATIONAL STRUCTURE

 

The following chart illustrates our corporate structure including our principal manufacturing subsidiaries as of March 31, 2016. The following chart does not include wholly owned intermediate holding companies, internal trading companies and those companies without active operations.

 

   

 

Our Consolidated Subsidiaries

 

ASE Test Taiwan

 

ASE Test Taiwan, which was acquired in 1990, is our wholly owned subsidiary. It is incorporated in Taiwan and is engaged in the testing of integrated circuits.

 

ASE Test Malaysia

 

ASE Test Malaysia, which was established in 1991, is our wholly owned subsidiary. It is incorporated in Malaysia and is engaged in the packaging and testing of integrated circuits.

 

ISE Labs

 

ISE Labs is our wholly owned subsidiary. It is a semiconductor company specializing in front-end engineering testing that is incorporated in the United States and has its principal facilities located in Fremont, California. We acquired 70.0% of the outstanding shares of ISE Labs in 1999 through ASE Test, and increased our holding to 100.0% through purchases made in 2000 and 2002.

 

ASE Singapore Pte. Ltd.

 

ASE Singapore Pte. Ltd., our wholly owned subsidiary, is incorporated in Singapore and provides packaging and testing services. We acquired ASE Singapore Pte. Ltd., which was wholly owned by ISE Lab, through our acquisition of ISE Lab in 1999. In January 2011, ASE Singapore II Pte. Ltd. (formerly, EEMS Test Singapore) merged into ASE Singapore Pte. Ltd. after we acquired ASE Singapore II Pte. Ltd. in August 2010.

 

ASE Electronics

 

ASE Material was established in 1997 as an ROC company for the production of interconnect materials, such as substrates, used in the packaging of semiconductors. We initially held a majority stake in ASE Material, but acquired the remaining equity by means of a merger of ASE Material with and into us in August 2004. In August 2006, we spun off the operations originally conducted through ASE Material into our wholly owned subsidiary ASE Electronics. ASE Electronics currently supplies our packaging operations with a substantial portion of our substrate requirements. The facilities of ASE Electronics are primarily located in the Nantze Export Processing Zone near our packaging and testing facilities in Kaohsiung, Taiwan.

 

ASE Chung Li and ASE Korea

 

In July 1999, we purchased Motorola’s Semiconductor Products Sector operations in Chung Li, Taiwan and Paju, South Korea for the packaging and testing of semiconductors, thereby forming ASE Chung Li and ASE Korea.

 

53

In August 2004, we acquired the remaining outstanding shares of ASE Chung Li that we did not already own and merged ASE Chung Li into us.

 

ASE Japan

 

ASE Japan, which we acquired from NEC Electronics Corporation in May 2004, is our wholly owned subsidiary. It is incorporated in Japan and is engaged in the packaging and testing of semiconductors.

 

ASE Shanghai

 

ASE Shanghai was established in 2001 as a wholly owned subsidiary of ASE Inc. and began operations in June 2004. ASE Shanghai primarily manufactures and supplies interconnect materials for our packaging operations.

 

ASESH AT

 

We acquired 100% of GAPT, now known as ASESH AT, in January 2007 for a purchase price of US$60.0 million. ASESH AT is a PRC company based in Shanghai, China that provides packaging and testing services for a wide range of semiconductors.

 

ASEN

 

In September 2007, we acquired 60.0% of ASEN, formerly known as NXP Semiconductors Suzhou Ltd., from NXP Semiconductors for a purchase price of US$21.6 million. NXP Semiconductors holds the remaining 40.0% of ASEN. ASEN is based in Suzhou, China and is engaged in semiconductor packaging and testing.

 

ASEWH

 

In May 2008, we acquired 100.0% of the shares of ASEWH from Aimhigh Global Corp. and TCC Steel. ASEWH is based in Weihai, Shandong, China and is engaged in semiconductor packaging and testing.

 

ASEKS

 

ASEKS was set up in 2004 and began operating in 2010. ASEKS is based in Kunshan, China and is engaged in semiconductor packaging and testing.

 

Wuxi Tongzhi

 

In May 2013, we, through our subsidiary ASESH AT, acquired 100.0% of the shares of Wuxi Tongzhi from Toshiba Semiconductor (Wuxi) Co, Ltd. Wuxi Tongzhi is based in Wuxi, China and is engaged in semiconductor packaging and testing.

 

USI Group

 

USI Group engages primarily in electronic manufacturing services in relation to computers, consumer electronics, communications, industrial and automotive, among other services and businesses. We purchased 22.6% of the outstanding shares of Universal Scientific in 1999. We subsequently increased our holding to 23.3% in 2000. As of December 31, 2009, we held approximately 18.1% of Universal Scientific’s outstanding equity shares, which allowed us to exercise significant influence over Universal Scientific and therefore accounted for this investment by the equity method. In February 2010, we, along with our two subsidiaries, J&R Holding Limited and ASE Test, through a cash and stock tender offer, acquired 641,669,316 common shares of Universal Scientific at NT$21 per share, amounting to NT$13,475.1 million in total, resulting in our controlling ownership over Universal Scientific. As a result, Universal Scientific became our subsidiary. The shares of Universal Scientific were delisted from the Taiwan Stock Exchange on June 17, 2010, which were previously listed under the symbol “2350.” In August 2010, we acquired additional 222,243,661 shares of Universal Scientific through another tender offer at NT$21 per share, amounting to NT$4,667.1 million in total. In September 2012, as part of our internal business restructuring, our subsidiaries transferred their shareholdings in Universal Scientific to ASE Inc.  

 

54

In February 2012, Universal Scientific Shanghai completed its IPO on the Shanghai Stock Exchange. The total proceeds from the IPO was approximately RMB811.7 million prior to deducting underwriting discounts and commissions. In November 2014, Universal Scientific Shanghai completed its capital increase by way of domestic private placements through a bidding process, raising a total of RMB2,063.0 million prior to deducting underwriting discounts and commissions. The issue price per share was RMB27.06. As of March 31, 2016, we indirectly held 77.3% of the total outstanding shares of Universal Scientific Shanghai through our subsidiaries USI Inc. and ASE Shanghai.

 

On February 2, 2015, Universal Scientific’s shareholders passed a resolution at the shareholders’ meeting to spin-off and assign Universal Scientific’s investment businesses with a then-estimated value of NT$35,537.8 million (US$1,083.8 million) to USI Inc. In April 2015, Universal Scientific completed a spin-off of its subsidiaries to USI Inc., a company incorporated under ROC law. As part of our business realignment effort, we acquired 990.1 million shares in USI Inc. on the spin-off record date, which resulted in us holding 99.2% of the total then outstanding shares of USI Inc. Following Universal Scientific’s spin-off of its investment businesses to USI Inc., Universal Scientific carried out a capital reduction plan reducing its capital from NT$16,413.0 million (US$500.5 million) to NT$400.0 million (US$12.2 million). As a result of such spin-off, as of April 1, 2015, we held approximately 99.0% of the outstanding common shares of Universal Scientific.

 

Furthermore, as part of our corporate reorganization to align each business function to different legal entity groups, the board of directors of ASE Inc. passed a resolution on September 24, 2015, to announce our intention to carry our the Universal Scientific Share Transfer. The Universal Scientific Share Transfer was approved by the Investment Commission of MOEA on February 3, 2016 and the majority of shares were transferred in March 2016, with the remaining share transfer to be completed in May 2016. As of March 31, 2016, ASE Inc. indirectly held 76.5% of Universal Scientific. Following the completion of the Universal Scientific Share Transfer, USI Group will operate under the legal entities directly and indirectly held under USI Inc. See “Item 4. Information on the Company—Information on the Company—History and Development of the Company—USI Group Restructuring” for more information.

 

PROPERTY, PLANTS AND EQUIPMENT

 

We operate a number of packaging, testing and electronic manufacturing facilities in Asia and the United States. Our facilities provide varying types or levels of services with respect to different end-product focus, customers, technologies and geographic locations. With our diverse facilities we are able to tailor our packaging, testing and electronic manufacturing solutions closely to our customers’ needs. The following table sets forth the location, commencement of operation, primary use, approximate floor space and ownership of our principal facilities as of February 29, 2016.

 

Facility 

Location 

Commencement of Operation 

Primary Use 

Approximate Floor Space
(in sq. ft.) 

Owned or Leased 

ASE Inc. Kaohsiung, ROC March 1984 Our primary packaging facility, which offers complete semiconductor manufacturing solutions in conjunction with ASE Test Taiwan and foundries located in Taiwan. Focuses primarily on packaging services such as flip-chip, wafer bumping and fine-pitch wire bonding. 5,848,000 Land: leased Buildings: owned and leased
  Chung Li, ROC Acquired in July 1999 An integrated packaging and testing facility that specializes in semiconductors for communications and consumer applications. 3,991,000 Land and buildings: owned
  Nantou, ROC April 2011 Our facility that provides packaging services. 80,000 Land and buildings: leased

 

55

Facility 

Location 

Commencement of Operation 

Primary Use 

Approximate Floor Space
(in sq. ft.) 

Owned or Leased 

ASE Test Taiwan Kaohsiung, ROC Acquired in April 1990 Our primary testing facilities, which offer complete semiconductor manufacturing solutions in conjunction with ASE Inc.’s facility in Kaohsiung and foundries located in Taiwan. Focuses primarily on advanced logic/mixed-signal/RF/3D IC testing for integrated device manufacturers, fabless design companies and system companies. 951,000 Land: leased Buildings: owned and leased
  Chung Li, ROC October 2001 Our primary wafer probing testing facilities. 116,000 Land and building: leased
ASE Test Malaysia Penang, Malaysia February 1991 An integrated packaging and testing facility that focuses primarily on the requirements of integrated device manufacturers. 828,000 Land: leased Buildings: owned
ASE Korea Paju, Korea Acquired in July 1999 An integrated packaging and testing facility that specializes in semiconductors for radio frequency, sensor and automotive applications. 1,079,000 Land and buildings: owned
ISE Labs California, USA
Texas, USA
Acquired in May 1999 Front-end engineering and final testing facilities located in northern California in close proximity to some of the world’s largest fabless design companies. Testing facilities located in close proximity to integrated device manufacturers and fabless companies in Texas. 96,000 Land and buildings: owned and leased
ASE Singapore Singapore Acquired in May 1999 An integrated packaging and testing facility that specializes in semiconductors for communication, computers and consumer applications. 282,000 Land: leased Buildings: owned and leased
ASE Shanghai Shanghai, China June 2004 Design and production of semiconductor packaging materials. 1,695,000 Land: leased Buildings: owned
ASE Japan Takahata, Japan Acquired in May 2004 An integrated packaging and testing facility that specializes in semiconductors for cellular phone, household appliance and automotive applications. 298,000 Land and buildings: leased

 

56

Facility 

Location 

Commencement of Operation 

Primary Use 

Approximate Floor Space
(in sq. ft.) 

Owned or Leased 

ASE Electronics Kaohsiung, ROC August 2006 Facilities for the design and production of interconnect materials such as substrates used in the packaging of semiconductors. 612,000 Land: leased Buildings: owned and leased
ASESH AT Shanghai, China Acquired in January 2007 An integrated packaging and testing facility that specializes in semiconductors for communications and consumer applications. 1,379,000 Land: leased Buildings: owned
ASEN Suzhou, China Acquired in September 2007 An integrated packaging and testing facility that specializes in communication applications. 433,000 Land: leased Buildings: owned
ASEWH Shandong, China Acquired in May 2008 An integrated packaging and testing facility that specializes in semiconductors for communications, computing and consumer applications. 759,000 Land: leased Buildings: owned
ASEKS Kunshan, China July 2010 An integrated packaging and testing facility that specializes in semiconductors for communications and consumer applications. 2,310,000 Land: leased Buildings: owned
Wuxi Tongzhi Wuxi, China Acquired in May 2013 An integrated packaging and testing facility that specializes in semiconductors for MP3, Vehicle, household appliance and communications  applications. 78,000 Land and buildings: leased
Universal Scientific Nantou, ROC Acquired in February 2010 Manufacture and marketing of electronic components, accessories and related products. 182,000 Land: owned Buildings: owned and leased
USI Mexico Guadalajara, Mexico Acquired in February 2010 Manufacturing site, which offer motherboard manufacture and system assembly. 362,000 Land: owned Buildings: owned

 

57

Facility 

Location 

Commencement of Operation 

Primary Use 

Approximate Floor Space
(in sq. ft.) 

Owned or Leased 

USISZ Shenzhen, China Acquired in February 2010 Manufacturing site, design, manufacture and marketing of motherboards, electronic components, accessories and related products in China. 683,000 Land: leased Buildings: owned
Universal Scientific Shanghai Shanghai, China Acquired in February 2010 Manufacturing site, design, manufacture and marketing of motherboards, electronic components, accessories and related products in China. 1,484,000 Land: leased Buildings: owned and leased
UGKS Kunshan, China August 2011 Manufacturing site, design, manufacture and marketing of motherboards, electronic components, accessories and related products in China. 884,000 Land: leased Buildings: leased
UGTW Nantou, ROC February 2010 Design, manufacture and marketing of electronic components, accessories and related products, and  provide related research and development services. 400,000 Land: owned
Buildings: owned and leased
UGJQ Shanghai, China Established in September 2013 Design, manufacture and marketing of motherboards, electronic components, accessories and related products in China. 647,000 Land: leased  Buildings: leased

 

Our major leased property in Kaohsiung consists primarily of leases of land in the Kaohsiung Nantze Export Processing Zone between ASE Inc. and ASE Test Taiwan, as the lessees, and the Export Processing Zones Administration (“the EPZA”), under the Ministry of Economic Affairs. The leases have ten-year or twenty-year terms that will expire through June 2035. No sublease or lending of the land is allowed. The EPZA has the right to adjust the rental price in the event the government revalues the land. The leases are typically renewable with three-month notice prior to the termination date.

 

ASE Inc. Kaohsiung Facility

 

In December 2013, the Kaohsiung City Environmental Protection Bureau ordered us to suspend the operations at our K7 Plant’s wafer-level process where nickel was used for alleged wastewater discharge violations and imposed a NT$110.1 million fine against us. The NT$110.1 million fine was later reduced to NT$109.4 million as ordered by the Kaohsiung City Environmental Protection Bureau. In December 2014, the Kaohsiung City Environmental Protection Bureau lifted the suspension order and approved the full resumption of operations of our K7 Plant after ordering a series of examinations, hearings and trial runs. In September 2015, the fine was further reduced to NT$102.0 million (US$3.1 million) by the Kaohsiung City Environmental Protection Bureau and we received a refund of NT$7.3 million (US$0.2 million) in October 2015.

 

 

58

With respect to the NT$102.0 million (US$3.1 million) administrative penalty imposed on us by the Kaohsiung City Environmental Protection Bureau, we appealed to the Kaohsiung High Administrative Court in August 2014 seeking to (i) revoke Kaohsiung City Government’s decision, (ii) lift the administrative penalty imposed on us and (iii) demand a refund of the administrative penalty. On March 22, 2016, the Kaohsiung High Administrative Court revoked Kaohsiung City Government’s decision and lifted the administrative penalty. Our demand for a refund of the fine was dismissed. We appealed to the Supreme Administrative Court on April 14, 2016 against the Kaohsiung High Administrative Court’s unfavorable ruling in dismissing a refund. The outcome of the proceeding cannot be predicted with certainty.

 

In connection with the same alleged violations at our K7 plant, in October 2014, the Kaohsiung District Court ruled that we were in violation of the ROC Waste Disposal Act and imposed on us a criminal penalty of NT$3.0 million. We appealed the case to the Taiwan High Court Kaohsiung District Branch in November 2014. In September 2015, the Taiwan High Court Kaohsiung District Branch overturned the decision made by Kaohsiung District Court and found the Company not guilty and repealed the criminal penalty imposed on the Company. The verdict was final and not appealable. For additional details of these administrative actions and judicial proceedings related to our K7 Plant see “—Environmental Matters” and “Item 8. Financial Information—Consolidated Statements and Other Financial Information—Legal Proceedings.”

 

Any future suspension of operations at K7 Plant or our other facilities may adversely affect our business, financial condition, results of operations and cash flows. See “Item 3. Key Information—Risk Factors—Risks Relating to Our Business—Any environmental claims or failure to comply with any present or future environmental regulations, as well as any fire or other industrial accident, may require us to spend additional funds and may materially and adversely affect our financial condition and results of operations.”

 

We currently do not have plans for significant expansion, but will re-evaluate our need for future expansion based on market condition and future demand requirements to meet our expected future growth. For information on the aggregate capacity of our facilities we operate, see “—Business Overview—Equipment.”

 

Item 4A. Unresolved Staff Comments

 

None.

 

Item 5. Operating and Financial Review and Prospects

 

OPERATING RESULTS AND TREND INFORMATION

 

The following discussion of our business, financial condition and results of operations should be read in conjunction with our consolidated financial statements, which are included elsewhere in this annual report. This discussion contains forward-looking statements that reflect our current views with respect to future events and financial performance. Our actual results may differ materially from those anticipated in these forward-looking statements as a result of any number of factors, such as those set forth under “Item 3. Key Information—Risk Factors” and elsewhere in this annual report. See “Special Note Regarding Forward-Looking Statements.”

 

Overview

 

We offer a broad range of semiconductor packaging, testing services and we also offer electronic manufacturing services since our acquisition of a controlling interest in Universal Scientific in February 2010. In addition to offering each service separately, we also offer turnkey services, which includes integrated packaging, testing and direct shipment of semiconductors to end users designated by our customers and solution-based proactive original design manufacturing, with our customers. In addition, we started generating revenues from our real estate business since 2010. Our operating revenues increased from NT$219,862.4 million in 2013 to NT$256,591.4 million in 2014 and NT$283,302.5 million (US$8,639.9 million) in 2015.

 

Discussed below are several factors that have had a significant influence on our financial results in recent years.

 

Pricing and Revenue Mix

 

We price our services taking into account the actual costs involved in providing these services, with reference to prevailing market prices. The majority of our prices and revenues are denominated in U.S. dollars. Any significant fluctuation in exchange rates, especially between NT dollars and U.S. dollars, will affect our costs and, in turn, our revenues.

 

59

In the case of semiconductor packaging, the cost of the silicon die, typically the most costly component of the packaged semiconductor, is usually not reflected in our costs (or revenues) since it is generally supplied by our customers on a consignment basis.

 

The semiconductor industry is characterized by a general trend toward declining prices for products and services of a given technology over time. In addition, during periods of intense competition and adverse conditions in the semiconductor industry, the pace of this decline may be more rapid than in other years. The average selling prices of our packaging and testing services have experienced sharp declines during such periods as a result of intense price competition from other market participants that attempt to maintain high capacity utilization levels in the face of reduced demand.

 

Declines in average selling prices have been partially offset historically by changes in our revenue mix, and typically the selling price is largely dependable on the complexity of the services. In particular, revenues derived from more advanced package types, such as flip-chip BGA, higher density packages with finer lead-to-lead spacing, or pitch, and testing of more complex, high-performance semiconductors have increased as a percentage of total revenues. We intend to continue to focus on package types such as bumping, flip-chip BGA and SiP, developing and offering new technologies in packaging and testing services and expanding our capacity to achieve economies of scale, as well as improving production efficiencies for older technologies, in order to mitigate the effects of declining average selling prices on our profitability.

 

Our profitability for a specific package type does not depend linearly on its average selling price. Some of our more traditional package types, which typically have low average selling prices, may well command steadier and sometimes higher margins than more advanced package types with higher average selling prices.

 

High Fixed Costs

 

Our operations, in particular our testing operations, are characterized by relatively high fixed costs. We expect to continue to incur substantial depreciation and other expenses especially from our acquisitions of packaging and testing equipment and facilities. Our profitability depends in part not only on absolute pricing levels for our products/services, but also on utilization rates on equipment, commonly referred to as “capacity utilization rates.” In particular, increases or decreases in our capacity utilization rates could have a significant effect on gross margins since the unit cost of our products and/or services generally decreases as fixed costs are allocated over a larger number of units. The capacity utilization rates of the machinery and equipment installed at our production facilities typically depend on factors such as the volume and variety of products, the efficiency of our operations in terms of the loading and adjustment of machinery and equipment for different products, the complexity of the different products to be packaged or tested, the amount of time set aside for the maintenance and repair of the machinery and equipment, and the experience and schedule of work shifts of operators.

 

In 2013, 2014 and 2015, our depreciation, amortization and rental expense included in operating costs as a percentage of operating revenues was 11.1%, 9.9% and 10.0%, respectively. The increase in depreciation, amortization and rental expense as a percentage of operating revenues in 2015 compared to 2014 was primarily a result of a decrease in our packaging and testing revenues. We begin depreciating our equipment when the machinery is placed into service. There may sometimes be a time lag between when our equipment is available for use and when it achieves high levels of utilization. In periods of depressed industry conditions, such as the fourth quarter of 2008, we experienced lower than expected demand from customers, resulting in an increase in depreciation relative to operating revenues. In particular, the capacity utilization rates for our testing equipment are more severely affected during an industry downturn as a result of a decrease in outsourcing demand from integrated device manufacturers, which typically maintain larger in-house testing capacity than in-house packaging capacity.

 

In addition to purchasing testers, we also lease a portion of our testers, which we believe allows us to better manage our capacity utilization rates and cash flow. Since leased testers can be replaced with more advanced testers upon the expiration of the lease, we believe that these operating leases have enabled us to improve our capacity utilization rates by allowing us to better align our capacity with changes in equipment technology and the needs of our customers. For more information about our testers, including the number of testers under lease, see “Item 4. Information on the Company—Business Overview—Equipment—Testing.”

 

60

Raw Material Costs

 

Substantially all of our raw material costs are accounted for by packaging, the production of interconnect materials and electronic manufacturing services. In particular, our electronic manufacturing services acquired in 2010 require more significant quantities of raw materials than our packaging and production of interconnect materials. In 2013, 2014 and 2015, raw material cost as a percentage of our operating revenues was 45.6%, 45.6% and 50.0%, respectively.

 

We have developed copper wire to gradually replace gold wire in the packaging processes in order to benefit from the lower material cost of copper. However, gold wire is still one of the principal raw materials we use in our packaging processes, and the recent volatility in the price of gold has affected our operating costs. In 2015, the spot rate for gold fluctuated from approximately US$1,049 per ounce to approximately US$1,298 per ounce according to the statistics published by The London Bullion Market Association. It may be difficult for us to adjust our average selling prices to account for fluctuations in the price of gold. We expect that gold wire will continue to be an important raw material for us and we therefore expect to continue to be subject to significant fluctuations in the price of gold.

 

Recent Accounting Pronouncements

 

Adopted standards for current period

 

In the current year, we have applied the following new, revised or amended standards and interpretations that have been issued and effective: Amendments to IFRSs Annual Improvements to IFRSs: 2010-2012 Cycle , Amendments to IFRSs Annual Improvements to IFRSs: 2011-2013 Cycle and Amendments to IAS 19 Defined Benefit Plans: Employee Contributions . We believe that the adoption of aforementioned standards or interpretations will not have a significant effect on our accounting policies. Please refer to note 3 to our consolidated financial statements included in this annual report for more information.

 

Standards not yet adopted

 

Among the new, revised or amended standards and interpretations that have been issued but are not yet effective, we believe that the adoption of the following standards and interpretations will not have a material effect on our accounting policies: Amendments to IFRSs Annual Improvements to IFRSs: 2012-2014 Cycl e, Amendments to IFRS 9 and IFRS 7 Mandatory Effective Date of IFRS 9 and Transition Disclosur es, Amendments to IFRS 10, IFRS 12 and IAS 28 Investment Entities: Applying the Consolidation Exception, Amendments to IFRS 11 Accounting for Acquisitions of Interests in Joint Operations, IFRS 14 Regulatory Deferral Accounts, Amendments to IAS 1 Disclosure Initiative, Amendments to IAS 7 Disclosure Initiative, Amendments to IAS 16 and IAS 38 Clarification of Acceptable Methods of Depreciation and Amortization and Amendments to IAS 16 and IAS 41 Agriculture: Bearer Plants. We are currently evaluating the impact on our financial position and operating results as a result of the initial adoption of the following standards and interpretations: IFRS 9 Financial Instruments , IFRS 15 Revenue from Contracts with Customers , Amendments to IFRS 15 Clarifications to IFRS 15 “Revenue from Contracts with Customers” , Amendments to IFRS 10 and IAS 28 Sale or Contribution of Assets between an Investor and its Associate or Joint Venture , IFRS 16 Leases and Amendments to IAS 12 Recognition of Deferred Tax Assets for Unrealized Losses .

 

Please refer to note 3 to our consolidated financial statements included in this annual report for more information.

 

Critical Accounting Policies and Estimates

 

Preparation of our consolidated financial statements requires us to make estimates and judgments in applying our critical accounting policies that have a significant impact on the results we report in our consolidated financial statements. Our principal accounting policies and critical accounting judgments and key sources of estimation uncertainty are set forth in detail in note 4 and note 5, respectively, to our consolidated financial statements included in this annual report. We continually evaluate these estimates and assumptions. Actual results may differ from these estimates under different assumptions and conditions. Significant accounting policies are summarized as follows.

 

 

61

Revenue Recognition . Revenue is measured at the fair value of the consideration received or receivable take into account of estimated customer returns, rebates and other similar allowances. Revenue from the sale of goods and real estate properties is recognized when the goods and real estate properties are delivered and titles have passed, at the time all the following conditions are satisfied:

  

· we have transferred to the buyer the significant risks and rewards of ownership of the goods and real estate properties;

 

· we retain neither continuing managerial involvement to the degree usually associated with ownership nor effective control over the goods and real estate properties sold;

 

· the amount of revenue can be reliably measured;

 

· it is probable that the economic benefits associated with the transaction will flow to us; and

 

· the costs incurred or to be incurred in respect of the transaction can be reliably measured.

 

Service income is recognized when services are rendered.

 

Our customers bear the title and risk of loss for those bare semiconductor wafers that we receive and package into finished semiconductors and/or those packaged semiconductors that we receive and test for performance specifications. Accordingly, the cost of customer-supplied semiconductor materials is not included in our consolidated financial statements.

 

A sales discount and return allowance is recognized in the period during which the sale is recognized, and is estimated based on historical experience, the management’s judgment and relevant factors.

 

Impairment of Accounts Receivable . We periodically record a provision for doubtful accounts based on our evaluation of the collectability of our accounts receivable. We first assess whether objective evidence of impairment exists individually in each customer for account receivable, then includes in a group basis with historical collective experience and similar credit risk characteristics and collectively assess them for impairment. As of December 31, 2013, 2014 and 2015, the allowance we set aside for doubtful accounts was NT$68.1 million, NT$84.1 million and NT$82.9 million (US$2.5 million), respectively. Additional allowances may be required in the future if the financial condition of our customers or general economic conditions further deteriorate, and this additional allowance would reduce our net income.

 

Inventories . Inventories are recorded at cost when acquired and stated at the lower of cost or net realizable values. Inventories are written down to net realizable value item by item, except for those that may be appropriate to group items of similar or related inventories. Materials received from customers for processing, mainly of semiconductor wafers, are excluded from inventories, as title and risk of loss remains with the customers. Net realizable value is the estimated selling prices of inventories less all estimated costs of completion and estimated costs necessary to make the sale. An allowance for loss on decline in market value and obsolescence is provided based on the difference between the cost of inventory and the estimated market value based upon assumptions about future demand and market conditions. Due to rapid technology advancements, we estimate the net realizable value of inventory for obsolete and unmarketable items at balance sheet date and then write down the cost of inventories to net realizable value. There may be significant changes in the net realizable value of inventories due to assumptions of future demand within a specific time period.

 

Realization of Deferred Tax Assets . Tax benefits arising from deductible temporary differences, unused tax credits and unused loss carry-forwards are recognized as deferred tax assets to the extent that it is probable that taxable profits will be available against which those deductible temporary differences can be utilized. We have considered future taxable income and ongoing prudent and feasible tax planning strategies in assessing the deferred tax assets. The carrying amounts of deferred tax assets are reviewed at each balance sheet date and reduced to the extent that it is no longer probable that sufficient taxable profits will be available to allow all or part of deferred tax assets to be utilized. A previously unrecognized deferred tax asset is also reviewed at each balance sheet date and recognized to the extent that it has become probable that future taxable profit will allow the deferred tax asset to be utilized. The realizability of deferred tax assets mainly depends on whether sufficient future profits or taxable temporary differences will be available. In cases where the actual future profits generated are less than expected, a material reversal of deferred tax assets may arise, which would be recognized in profit or loss for the period in which such a reversal takes place.

 

62

Impairment of Tangible and Intangible Assets Other than Goodwill . At each balance sheet date, we review the carrying amounts of the tangible and intangible assets, excluding goodwill, to determine whether there is any indication that those assets have suffered an impairment loss. If any such indication exists, the recoverable amount of the asset is estimated in order to determine the extent of the impairment loss. Recoverable amount is the higher of fair value less costs to sell and value in use. If the recoverable amount of an asset or cash-generating unit is estimated to be less than its carrying amount, the carrying amount of the asset or cash-generating unit is reduced to its recoverable amount. The process of evaluating the potential impairment of tangible and intangible assets other than goodwill requires significant judgment. We are required to make subjective judgments in determining the independent cash flows, useful lives, expected future revenue and expenses related to the specific asset groups with the consideration of its usage patterns and the nature of the semiconductor industry. Any changes in these estimates based on changed economic conditions or business strategies could result in significant impairment charges in future periods.

 

In 2013, 2014 and 2015, we recognized impairment losses of NT$495.5 million, NT$297.8 million and NT$258.1 million (US$7.9 million), respectively, on property, plant and equipment. See notes 13 and 22 to our consolidated financial statements included in this annual report.

 

Business Combinations . When we acquire businesses, goodwill is measured as the excess of the sum of the consideration transferred, the amount of any non-controlling interests in the acquiree, and the fair value of the acquirer’s previously held equity interest in the acquiree (if any) over the net of the acquisition-date amounts of the identifiable assets acquired and the liabilities assumed. The allocation of the purchase price requires management to make significant estimates in determining the fair values of assets acquired and liabilities assumed, especially with respect to intangible assets. These estimates are based on historical experience, information obtained from the management of the acquired companies and independent external service providers’ reports. These estimates can include, but are not limited to, the cash flows that an asset is expected to generate in the future, the appropriate weighted-average cost of capital, and the synergistic benefits expected to be derived from the acquired business. These estimates are inherently uncertain and unpredictable. In addition, unanticipated events and circumstances may occur, which may affect the accuracy or validity of such estimates.

 

For example, we acquired Universal Scientific through tender offers in February and August 2010 and EEMS Test Singapore in August 2010; acquired tangible assets and liabilities as well as identified intangible assets were valued at estimates of their current fair values. The valuation of acquired intangible assets was determined based on management’s estimates. In addition, the amortization method of these intangible assets is based on the pattern in which the economic benefits are consumed. In addition, we also recognized goodwill, which represents the excess of the purchase price over the estimated fair value of the net assets acquired. See our consolidated statements of cash flow as well as notes 13 to 15 and 26 to our consolidated financial statements included in this annual report.

 

Goodwill . Goodwill is tested for impairment annually and we test for impairment more frequently if an event occurs or circumstances change that would indicate that the cash-generating unit may be impaired. Goodwill is tested for impairment by comparing the carrying amount of the cash-generating unit to which the goodwill has been allocated to its recoverable amount. Recoverable amount is defined as the higher of a cash-generating unit’s fair value less costs to sell or its value in use, which is defined as the present value of the expected future cash flows generated by the cash-generating unit. In conducting the future cash flow valuation, we make assumptions about future operating cash flows, the discount rate used to determine present value of future cash flows, and capital expenditures. Future operating cash flows assumptions include sales growth assumptions, which are based on our historical trends and industry trends, and gross margin and operating expense growth assumptions, which are based on the historical relationship of those measures compared to sales and certain cost cutting initiatives. An impairment charge is incurred to the extent the carrying amount exceeds the recoverable amount. As of December 31, 2015, we had goodwill of NT$10,506.5 million (US$320.4 million). We did not recognize any impairment loss in 2013, 2014 and 2015. Our conclusion could, however, change in the future if actual results differ from our estimates and judgments under different assumptions and conditions.

 

Valuation of Investments . We hold investments in the shareholdings of public and non-public entities. We evaluate these investments periodically for impairment based on market prices, if available, the financial condition of the investees and economic conditions in the industry. These assessments usually require a significant amount of judgment, as a significant decline in the market price may be a short-term drop and may not be the best indicator of impairment. Whenever triggering events or changes in circumstances indicate that an investment may be impaired and carrying amount may not be recoverable, we measure the impairment based on the market prices, if available, or using market approach based on the financial result of the investments. Several of the investments held by us are recognized as the equity method investments, debt investments with no active market or available-for-sale financial assets. Any significant decline in the estimated future cash flows of the investments or financial assets could affect the value of the investment and indicate that an impairment charge may occur. In 2013 and 2014, we recognized impairment losses of NT$196.3 million and NT$10.4 million, respectively, on our investments. We did not recognize any impairment loss in 2015. See note 22 to our consolidated financial statements included in this annual report.

 

63

Stock-based Compensation . Equity-settled share-based payments to employees are measured at the fair value of the equity instruments at the grant date. The fair value determined at the grant date of the equity-settled share-based payments is expensed on a straight-line basis over the vesting period, based on our best estimate of equity instruments that will eventually vest, with a corresponding increase in capital surplus-employee share options. The fair value is measured using the Hull & White Model (2004) incorporated with Ritchken’s Trinomial Tree Model (1995) or the Black-Scholes Option Pricing Model, depending on the terms and conditions of the plans. The inputs to the models are share price at the grant date, exercise price, expected volatility, life of the share option and dividend yield, and risk free interest rates.

 

Defined Benefit Plans. Accrued pension liabilities and the resulting pension expenses under defined benefit pension plans are calculated using the projected unit credit method. Actuarial assumptions comprise discount rates and expected rates of salary increase. Due to changing market and economic conditions, the underlying key assumptions may differ from actual developments and may lead to significant changes in our defined benefit plans. We immediately recognize all actuarial gains and losses arising from defined benefit plans in retained earnings.

 

Fair value of Derivatives and Other Financial Instruments. We use our judgments applying appropriate valuation techniques commonly applied by market practitioners. The assumptions applied are based on observable quoted market prices, foreign exchange rates and interest rates to the extent it is available. The fair value of unquoted equity instruments is estimated based on the assumptions supported by unobservable market prices and interest rates which are disclosed in note 31 to our consolidated financial statements included in this annual report. We believe that the valuation techniques and the assumptions applied are appropriate in determining the fair value of financial instruments.

 

Results of Operations

 

The following table sets forth, for the periods indicated, financial data from our consolidated statements of comprehensive income, expressed as a percentage of operating revenues.

 

    Year Ended December 31,
    2013   2014   2015
     
Operating revenues     100.0 %     100.0 %     100.0 %
Packaging     51.2       47.3       41.2  
Testing     11.3       10.1       8.9  
Electronic manufacturing services     35.7       41.2       48.8  
Others     1.8       1.4       1.1  
Operating costs     (80.5 )     (79.1 )     (82.3 )
Gross profit     19.5       20.9       17.7  
Operating expenses     (9.5 )     (9.3 )     (8.9 )
Other operating income and expenses, net     (0.6 )     0.0       (0.1 )
Profit from operations     9.4       11.6       8.7  
Non-operating expense, net     (0.6 )     (0.5 )     0.2  
Profit before income tax     8.8       11.1       8.9  
Income tax expense     (1.6 )     (2.2 )     (1.5 )
Profit for the year     7.2 %     8.9 %     7.4 %
Attributable to                        
Owners of the Company     7.0 %     8.7 %     7.1 %
Non-controlling interests     0.2       0.2       0.3  
      7.2 %     8.9 %     7.4 %
Other comprehensive income, net of income tax     1.5       2.2       0.0  
Total comprehensive income for the year     8.7 %     11.1 %     7.4 %
Attributable to                        
Owners of the Company     8.4 %     10.7 %     7.1 %
Non-controlling interests     0.3       0.4       0.3  
      8.7 %     11.1 %     7.4 %

64

The following table sets forth, for the periods indicated, the gross margins for our packaging, testing services and electronic manufacturing services and our total gross margin. Gross margin is calculated by dividing gross profits by operating revenues.

 

    Year Ended December 31,
    2013   2014   2015
    (percentage of operating revenues)
Gross profit                        
Packaging     21.0 %     27.2 %     26.0 %
Testing     36.7       37.2       35.8  
Electronic manufacturing services     10.3       8.6       6.8  
Overall     19.5 %     20.9 %     17.7 %

 

The following table sets forth, for the periods indicated, a breakdown of our total operating costs and operating expenses, expressed as a percentage of operating revenues.

 

    Year Ended December 31,
    2013   2014   2015
    (percentage of operating revenues)
Operating costs                        
Raw materials     45.6 %     45.6 %     50.0 %
Labor     12.8       13.0       12.3  
Depreciation, amortization and rental expense     11.1       9.9       10.0  
Others     11.0       10.6       10.0  
Total operating costs     80.5 %     79.1 %     82.3 %
Operating expenses                        
Selling     1.4 %     1.3 %     1.3 %
General and administrative     4.0       4.0       3.8  
Research and development     4.1       4.0       3.8  
Total operating expenses     9.5 %     9.3 %     8.9 %

 

Year ended December 31, 2015 Compared to Year Ended December 31, 2014

 

Operating Revenues . Operating revenues increased 10.4% to NT$283,302.5 million (US$8,639.9 million) in 2015 from NT$256,591.4 million in 2014, primarily due to an increase in revenues from our electronic manufacturing services business. Packaging revenues decreased 3.9% to NT$116,607.3 million (US$3,556.2 million) in 2015 from NT$121,336.5 million in 2014. Testing revenues decreased 2.6% to NT$25,191.9 million (US$768.3 million) in 2015 from NT$25,874.7 million in 2014. Revenues from our electronic manufacturing services business increased 30.7% to NT$138,242.1 million (US$4,216.0 million) in 2015 from NT$105,784.4 million in 2014. The decrease in packaging and testing revenues was primarily due to slightly soft demand in the end-application market. The increase in the revenues from our electronic manufacturing services business was primarily due to an increase in the outsourced orders for communications and consumer products.

 

 

65

Gross Profit . Gross profit decreased 6.4% to NT$50,135.2 million (US$1,529.0 million) in 2015 from NT$53,588.5 million in 2014. Our gross profit as a percentage of operating revenues, or gross margin, was 17.7% in 2015 compared to 20.9% in 2014. The decrease was primarily due to the growth in our electronic manufacturing services business with a lower gross margin. Raw material costs in 2015 were NT$141,778.8 million (US$4,323.8 million) compared to NT$116,998.6 million in 2014. As a percentage of operating revenues, raw material costs increased to 50.0% in 2015 from 45.6% in 2014 primarily due to an increase in orders in our electronic manufacturing services business, which required relatively higher raw material costs compared to our other businesses. Depreciation, amortization and rental expenses were NT$28,191.8 million (US$859.8 million) in 2015 compared to NT$25,386.7 million in 2014. As a percentage of operating revenues, depreciation, amortization and rental expenses increased to 10.0% in 2015 from 9.9% in 2014 due to a decrease in our packaging and testing revenues. Labor cost in 2015 was NT$34,720.4 million (US$1,058.9 million) compared to NT$33,243.2 million in 2014. As a percentage of operating revenues, labor cost decreased to 12.3% in 2015 from 13.0% in 2014 primarily due to the growth of our operating revenues. Our gross margin for our packaging business decreased to 26.0% in 2015 from 27.2% in 2014 due to an increase in labor costs and depreciation expenses as a percentage of packaging revenue, partially offset by a decrease in raw material costs as a percentage of packaging revenues. Our gross margin for our testing business decreased to 35.8% in 2015 from 37.2% in 2014 primarily due to an increase in depreciation expenses as a percentage of testing revenues. Our gross margin for our electronic manufacturing services business decreased to 6.8% in 2015 from 8.6% in 2014 primarily due to an increase in the sale of products with lower gross margins.

 

Profit from operations . Profit from operations decreased 17.5% to NT$24,633.1 million (US$751.3 million) in 2015 compared to NT$29,874.5 million in 2014. Our profit from operations as a percentage of operating revenues, or operating margin, decreased to 8.7% in 2015 from 11.6% in 2014 primarily due to a decrease in gross margin. Operating expenses increased 5.5% to NT$25,250.6 million (US$770.1 million) in 2015 compared to NT$23,942.7 million in 2014. The increase in operating expenses was primarily due to an increase in general and administrative expense, as well as research and development expense. General and administrative expense increased 5.0% to NT$10,724.6 million (US$327.1 million) in 2015 from NT$10,214.8 million in 2014, primarily due to the professional service fees incurred from our strategic investments in 2015, including that incurred for the Initial SPIL Tender Offer and Second SPIL Tender Offer. General and administrative expense as a percentage of our operating revenues was 3.8% in 2015, compared to 4.0% in 2014. Research and development expense increased 6.3% to NT$10,937.5 million (US$333.6 million), accounting for 3.8% of operating revenues in 2015, compared to NT$10,289.7 million, accounting for 4.0% of operating revenues in 2014. This increase in the research and development expense was primarily due to an increase in salary expenses from increased headcounts. Selling expense increased 4.4% to NT$3,588.5 million (US$109.4 million) in 2015 from NT$3,438.2million in 2014. This increase was primarily due to an increase in salary and bonus expenses primarily due to salary raises. Selling expense as a percentage of operating revenues was 1.3% in both 2015 and 2014. We had a net other operating expense of NT$251.5 million (US$7.6 million) in 2015 compared to a net other operating income of NT$228.7 million in 2014. The increase in net other operating expense was primarily due to (i) the reversal of the settlement with Tessera in relation to patent infringement claims in the amount of US$3.0 million in the fourth quarter of 2014 due to the reduction of the final settlement amount from US$30.0 million to US$27.0 million and (ii) the receipt of direct reimbursement from Citibank, N.A., the depositary bank for our ADR programs, in the amount of US$4.1 million (net of U.S. withholding tax) in 2014.

 

Non-Operating Expense, Net . We had a net non-operating income of NT$660.1 million (US$20.1 million) in 2015 compared to a net non-operating expense of NT$1,339.4 million in 2014. This increase was primarily due to (i) an increase in non-operating income due to the change in the net gain/loss on valuation of financial assets and liabilities and net foreign exchange gain/loss which resulted in an increase in net gain from NT$616.9 million in 2014 to NT$1,759.6 million (US$53.7 million) in 2015, (ii) an increase in non-operating income due to the increase in the income earned from equity method investments from the loss of NT$121.9 million in 2014 to the profit of NT$407.6 million (US$12.4 million) in 2015 and (iii) an increase in non-operating income due to an increase in dividends income from NT$101.3 million in 2014 to NT$397.0 million (US$12.1 million) in 2015.

 

Net Profit . Net profit, excluding non-controlling interests, decreased 10.0% to NT$20,013.5 million (US$610.4 million) in 2015 compared to NT$22,228.6 million in 2014. Our diluted earnings per ADS decreased to NT$12.55 (US$0.38) in 2015 compared to diluted earnings per ADS of NT$13.93 in 2014. Our income tax expense decreased 23.9% to NT$4,311.1 million (US$131.5 million) in 2015 compared to NT$5,666.0 million in 2014, primarily due to a decrease in the income tax on undistributed earnings.

 

66

Year ended December 31, 2014 Compared to Year Ended December 31, 2013

 

Operating Revenues . Operating revenues increased 16.7% to NT$256,591.4 million in 2014 from NT$219,862.4 million in 2013, primarily due to an increase in revenues from our electronic manufacturing services business. Packaging revenues increased 7.8% to NT$121,336.5 million in 2014 from NT$112,603.9 million in 2013. Testing revenues increased 4.6% to NT$25,874.7 million in 2014 from NT$24,732.2 million in 2013. Revenues from our electronic manufacturing services business increased 34.7% to NT$105,784.4 million in 2014 from NT$78,530.6 million in 2013. The increase in packaging revenues was primarily due to an increase in the demand for our services and an increase in the revenues generated from our copper wire bonding solutions. The increase in testing revenues was primarily due to an increase in sales volume for our testing business. The increase in the revenues from our electronic manufacturing services business was primarily due to an increase in the outsourced orders for communications products.

 

Gross Profit . Gross profit increased 25.1% to NT$53,588.5 million in 2014 from NT$42,822.0 million in 2013. Our gross profit as a percentage of operating revenues, or gross margin, was 20.9% in 2014 compared to 19.5% in 2013. The increase was primarily due to a decrease in depreciation expenses as a percentage of our operating revenues. Raw material costs in 2014 were NT$116,998.6 million compared to NT$100,314.5 million in 2013 primarily due to an increase in revenue contribution by our electronic manufacturing services business with higher raw material costs, partially offset by a decrease in the price of gold. As a percentage of operating revenues, raw material costs were 45.6% in both 2014 and 2013. Depreciation, amortization and rental expenses were NT$25,386.7 million in 2014 compared to NT$24,447.0 million in 2013. As a percentage of operating revenues, depreciation, amortization and rental expenses decreased to 9.9% in 2014 from 11.1% in 2013 due to increase in revenue. Labor cost in 2014 was NT$33,243.2 million compared to NT$28,053.5 million in 2013. As a percentage of operating revenues, labor cost increased to 13.0% in 2014 from 12.8% in 2013 primarily due to an increase in salary and bonus payments as a result of increase in headcount. Our gross margin for our packaging business increased to 27.2% in 2014 from 21.0% in 2013 due to a decrease in raw material costs as a percentage of packaging revenues. Our gross margin for our testing business increased to 37.2% in 2014 from 36.7% in 2013 primarily due to a decrease in depreciation as a percentage of testing revenues but partially offset by an increase in labor costs as a percentage of testing revenues. Our gross margin for our electronic manufacturing services business decreased to 8.6% in 2014 from 10.3% in 2013 primarily due to a change in product mix.

 

Profit from operations . Profit from operations increased 44.2% to NT$29,874.5 million in 2014 compared to NT$20,713.4 million in 2013. Our profit from operations as a percentage of operating revenues, or operating margin, increased to 11.6% in 2014 from 9.4% in 2013 primarily due to an increase in gross margin. Operating expenses increased 15.3% to NT$23,942.7 million in 2014 compared to NT$20,760.4 million in 2013. The increase in operating expenses was primarily due to an increase in general and administrative expense, as well as research and development expense. General and administrative expense increased 17.2% to NT$10,214.8 million in 2014 from NT$8,712.9 million in 2013, primarily due to an increase in salary and bonus payments due to an increase in headcount. General and administrative expense as a percentage of our operating revenues was 4.0% in both 2014 and 2013. Research and development expense increased 13.5% to NT$10,289.7 million, accounting for 4.0% of operating revenues in 2014, compared to NT$9,064.7 million, accounting for 4.1% of operating revenues in 2013. This increase in the research and development expense was primarily due to an increase in salary and bonus payments due to increase in headcount. Selling expense increased 15.3% to NT$3,438.2 million in 2014 from NT$2,982.8 million in 2013. This increase was primarily due to an increase in salary and bonus payments due to increase in headcount and an increase in sampling costs. Selling expense as a percentage of operating revenues was 1.3% in 2014, compared to 1.4% in 2013. We had a net other operating income of NT$228.6 million in 2014 compared to a net other operating expense of NT$1,348.2 million in 2013. The increase in net other operating income was primarily due to the settlement with Tessera in relation to patent infringement claims in 2013. We recognized the settlement in the amount of US$30.0 million in the fourth quarter of 2013, and reversed US$3.0 million in the fourth quarter of 2014 due to the reduction of the final settlement amount from US$30.0 million to US$27.0 million.

 

67

Non-Operating Expense, Net . We had a net non-operating expense of NT$1,339.4 million in 2014 compared to a net non-operating expense of NT$1,343.6 million in 2013. This decrease was primarily due to (i) a decrease in non-operating expenses as a result of decrease in impairment loss on financial assets from NT$196.3 million in 2013 to NT$10.4 million in 2014 and (ii) an increase in non-operating income due to the change in the net gain/loss on valuation of financial assets and liabilities and net foreign exchange gain/loss which resulted in an increase in net gain from NT$519.2 million in 2013 to NT$616.9 million in 2014, but partially offset by (i) an increase in non-operating expenses due to an increase in finance costs (consisting mainly of interest expenses) from NT$2,307.5 million in 2013 to NT$2,354.1 million in 2014, (ii) a decrease in non-operating income due to the decrease in the income earned from equity investments from the profit of NT$22.0 million in 2013 compared to the loss of NT$121.9 million in 2014, and (iii) a decrease in non-operating income due to the decrease in the net gain on disposal of financial assets from NT$96.2 million in 2013 to NT$0.8 million in 2014.

 

Net Profit . Net profit, excluding non-controlling interests, increased 44.3% to NT$22,228.6 million in 2014 compared to NT$15,404.5 million in 2013. Our diluted earnings per ADS increased to NT$13.93 in 2014 compared to diluted earnings per ADS of NT$9.96 in 2013. Our income tax expense increased 61.9% to NT$5,666.0 million in 2014 compared to NT$3,499.6 million in 2013, primarily due to an increase in the profit before income tax and income tax on undistributed earnings, partially offset by an increase in the tax credit.

 

Quarterly Operating Revenues, Gross Profit and Gross Margin

 

The following table sets forth our unaudited consolidated operating revenues, gross profit and gross margin for the quarterly periods indicated. The unaudited quarterly results reflect all adjustments, consisting of normal recurring adjustments, that, in the opinion of management, are necessary for a fair presentation of the amounts, on a basis consistent with the audited consolidated financial statements included elsewhere in this annual report. You should read the following table in conjunction with the audited consolidated financial statements and related notes included elsewhere in this annual report. Our operating revenues, gross profit and gross margin for any quarter are not necessarily indicative of the results for any future period. Our quarterly operating revenues, gross profit and gross margin may fluctuate significantly.

 

   

Quarter Ended

   

Mar. 31,
2014

 

Jun. 30,
2014

 

Sept. 30,
2014

 

Dec. 31,
2014

 

Mar. 31,
2015

 

Jun. 30,
2015

 

Sept. 30,
2015

 

Dec. 31,
2015

    NT$   NT$   NT$   NT$   NT$   NT$   NT$   NT$
    (in millions)
Consolidated Operating Revenues                                                                
Packaging     26,721.8       30,641.2       32,031.1       31,942.4       29,320.9       28,617.8       29,575.1       29,093.5  
Testing     5,784.6       6,599.8       6,827.5       6,662.8       6,179.5       6,230.8       6,425.7       6,355.9  
Electronic manufacturing services     21,365.4       20,500.6       26,740.5       37,177.9       28,300.1       34,534.0       36,107.2       39,300.8  
Others     827.8       873.6       1,032.8       861.6       861.6       839.2       762.4       798.0  
Total     54,699.6       58,615.2       66,631.9       76,644.7       64,662.1       70,221.8       72,870.4       75,548.2  
Consolidated Gross Profit                                                                
Packaging     6,101.4       7,694.3       8,728.9       10,515.6       7,543.2       7,226.2       7,809.7       7,769.4  
Testing     1,867.3       2,458.2       2,716.8       2,589.7       2,121.7       2,190.7       2,321.6       2,391.7  
Electronic manufacturing services     2,006.6       2,007.1       2,239.4       2,865.8       2,238.3       1,779.7       2,567.5       2,847.9  
Others     383.9       450.8       522.9       439.8       410.2       368.7       288.8       259.9  
Total     10,359.2       12,610.4       14,208.0       16,410.9       12,313.4       11,565.3       12,987.6       13,268.9  
Consolidated Gross Profit (%)                                                                
Packaging     22.8 %     25.1 %     27.3 %     32.9 %     25.7 %     25.3 %     26.4 %     26.7 %
Testing     32.3       37.2       39.8       38.9       34.3       35.2       36.1       37.6  
Electronic manufacturing services     9.4       9.8       8.4       7.7       7.9       5.2       7.1       7.2  
Overall     18.9 %     21.5 %     21.3 %     21.4 %     19.0 %     16.5 %     17.8 %     17.6 %

 

68

Our results of operations are affected by seasonality. In general, our first quarter operating revenues have historically decreased over the preceding fourth quarter, primarily due to the combined effects of holidays in the United States, Taiwan and elsewhere in Asia. Moreover, the increase or decrease in operating revenues of a particular quarter as compared with the immediately preceding quarter varies significantly. See “Item 3. Key Information—Risk Factors—Risks Relating to Our Business—Our operating results are subject to significant fluctuations, which could adversely affect the market value of your investment.”

 

Exchange Rate Fluctuations

 

For quantitative and qualitative disclosure of our exposure to foreign currency exchange rate risk, see “Item 11. Quantitative and Qualitative Disclosures about Market Risk—Market Risk—Foreign Currency Exchange Rate Risk.”

 

Taxation

 

The corporate income tax rate in the ROC decreased from 25% to 17%, effective since January 1, 2010. The ROC Statute for Upgrading Industries, which provided various tax incentives including investment tax credits, tax exemptions and tax holidays for companies, expired on December 31, 2009. Under this statute, we had been granted tax holidays covering the portion of our income attributable to eligible machinery and equipment that were procured with cash infusions from our shareholders or after the capitalization of retained earnings through the issuance of stock dividends, and tax credits of 7% for the purchase of qualifying manufacturing equipment. We can continue to enjoy the tax holidays that have been granted to us by the ROC tax authority. On April 16, 2010, the Legislative Yuan of ROC passed the Industrial Innovation Act, effective from January 1, 2010 to December 31, 2019. Under the prevailing Industrial Innovation Act, a profit-seeking enterprise may deduct up to (i) 15% of its research and development expenditures from its income tax payable for the fiscal year in which these expenditures are incurred; or (ii) 10% of its research and development expenditures from its income tax payable for the fiscal year in which these expenditures are incurred or the following two years. However, the deduction may not exceed 30% of the income tax payable for that fiscal year. Under the Alternative Minimum Tax Act (the “AMT Act”) which took effect on January 2006 and was amended in August 2012, when the amount of the regular income tax calculated pursuant to the AMT Act is below the amount of the alternative minimum tax, or the AMT, a taxpayer is required to pay the difference between the AMT and the said regular income tax, which becomes the AMT payable. Taxable income for calculating the AMT includes most sources of income that are exempted from income tax under various legislations such as tax holidays. However, there are grandfathered treatments for the tax holidays approved by the tax authority before the AMT Act took effect. Under the amended AMT Act, the standard deduction for taxable income that applies to business entities decreased from NT$2.0 million to NT$0.5 million and the tax rate that applies to business entities increased from 10% to 12%. The amendment to the AMT Act became effective on January 1, 2013.

 

As of February 29, 2016, we had several five-year tax holidays on income derived from a portion of our operations in Kaohsiung, Taiwan, which will expire through December 31, 2016 to December 31, 2020. In addition, some of our subsidiaries, such as ASE Test Taiwan and ASE Electronics, are entitled to certain tax exemptions on income derived from a portion of their respective operations. The aggregate tax benefits of such exemptions for the years ended December 31, 2013, 2014 and 2015 were NT$373.1 million, NT$623.7 million and NT$538.0 million (US$16.4 million), respectively.

 

In addition, since we have facilities located in special export zones such as the Nantze Export Processing Zone in Taiwan, we enjoy exemptions from various import duties, commodity taxes and business taxes on imported machinery, equipment, raw materials and components which are directly used for manufacturing finished goods. We also enjoy exemptions from commodity and business taxes on finished goods exported or sold to others within the zones.

 

Under the ROC Income Tax Act, after January 1998, all earnings generated in a year which are not distributed to shareholders as dividends in the following year will be assessed a 10% undistributed earnings tax. As a result, if we do not distribute all of our annual earnings as either cash or stock dividends in the following year, these undistributed earnings will be subject to the 10% undistributed earnings tax. However, when we declare a dividend out of those undistributed earnings on which the 10% undistributed earnings tax had been paid, up to 5% of such undistributed earnings tax may be credited against the withholding tax imposed on the dividends.

 

69

In 2014, our effective income tax rate (including the corporate income tax rate and the 10% undistributed earnings tax) increased to 20% from 18% in 2013 primarily due to an increase in undistributed earnings tax. In 2015, our effective income tax rate decreased to 17% from 20% in 2014 primarily due to a decrease in undistributed earnings tax. We believe that our future estimated taxable income will be sufficient to utilize our deferred tax assets recorded as of December 31, 2015.

 

Inflation

 

We do not believe that inflation in Taiwan or elsewhere has had a material impact on our results of operations.

 

LIQUIDITY AND CAPITAL RESOURCES

 

We have historically been able to satisfy our working capital needs from our cash flow from operations. We have historically funded our capacity expansion from internally generated cash and, to the extent necessary, the issuance of equity securities and borrowings. If adequate funds are not available on satisfactory terms, we may be forced to curtail our expansion plans. Moreover, our ability to meet our working capital needs from cash flow from operations will be affected by the demand for our packaging, testing services and electronic manufacturing services, which in turn may be affected by several factors. Many of these factors are outside of our control, such as economic downturns and declines in the prices of our services or products caused by a downturn in the industry. See “Item 3. Key Information—Risk Factors—Risks Relating to Our Business—Our operating results are subject to significant fluctuations, which could adversely affect the market value of your investment.” To the extent we do not generate sufficient cash flow from our operations to meet our cash requirements, we will have to rely on external financing.

 

Net cash provided by operating activities amounted to NT$57,548.3 million (US$1,755.1 million) in 2015 primarily as a result of (i) our operation performance with profit before income tax of NT$25,293.2 million (US$771.4 million) and (ii) our non-cash depreciation and amortization in the amount of NT$29,518.7 million (US$900.2 million). Net cash provided by operating activities amounted to NT$45,863.5 million in 2014, primarily as a result of (i) our operation performance with profit before income tax of NT$28,535.1 million and (ii) our non-cash depreciation and amortization in the amount of NT$26,350.8 million. Net cash provided by operating activities amounted to NT$41,296.0 million in 2013, primarily as a result of (i) our operation performance with profit before income tax of NT$19,369.8 million and (ii) our non-cash depreciation and amortization in the amount of NT$25,470.9 million. The increase in net cash provided by operating activities in 2015 compared to 2014 was primarily due to cash inflows from a decrease in trade receivables, partially offset by cash outflows from a decrease in trade payables. The increase in net cash provided by operating activities in 2014 compared to 2013 was primarily due to an increase in profit before income tax and cash inflows from an increase in trade payables and other payables, partially offset by cash outflows from an increase in trade receivables and inventories.

 

Net cash used in investing activities amounted to NT$63,351.4 million (US$1,932.0 million) in 2015 primarily due to our acquisition of associates and joint ventures of NT$35,673.1 million (US$1,087.9 million) and our acquisition of property, plant and equipment of NT$30,280.1 million (US$923.5 million). Net cash used in investing activities amounted to NT$38,817.9 million in 2014, primarily due to our acquisition of property, plant and equipment of NT$39,599.0 million. Net cash used in investing activities amounted to NT$29,925.8 million in 2013, primarily due to our acquisition of property, plant and equipment of NT$29,142.7 million.

 

Net cash provided by financing activities amounted to NT$8,636.3 million (US$263.4 million) in 2015. This amount reflected primarily (i) our net proceeds from short-term bank loans and bills payable and long-term bank loans and bills payable in the amount of NT$12,776.2 million (US$389.6 million); (ii) the net proceeds from the 2018 NTD-linked Convertible Bonds of NT$6,136.4 million (US$187.1 million) and (iii) our proceeds from partial disposal of interests in subsidiaries of NT$8,910.3 million (US$271.7 million), which was partially offset by (i) our distributed cash dividends to owners of the Company in the amount of NT$15,297.5 million (US$466.5 million) and (ii) our payments for repurchases of treasury shares of NT$5,333.4 million (US$162.7 million). Net cash used in financing activities amounted to NT$2,797.0 million in 2014. This amount reflected primarily (i) our net repayment of short-term borrowings and long-term bank loans in the amount of NT$12,389.7 million; and (ii) our distributed cash dividends to owners of the Company in the amount of NT$9,967.2 million, partially offset by (i) our net proceeds from issue of bonds of NT$8,158.8 million; and (ii) change in non-controlling interests of NT$9,905.7 million due to Universal Scientific Shanghai’s capital increase. Net cash provided by financing activities amounted to NT$12,794.9 million in 2013. This amount reflected primarily (i) our net proceeds from short-term borrowings and long-term bank loans in the amount of NT$4,385.2 million; (ii) net proceeds from issue of convertible bonds in the amount of NT$11,900.1 million; and (iii) proceeds from Capital Increase in the amount of NT$3,393.0 million, partially offset by our distributed cash dividends to owners of the Company in the amount of NT$7,834.9 million.

 

70

As of December 31, 2015, our primary source of liquidity was NT$55,251.2 million (US$1,685.0 million) of cash and cash equivalents and NT$3,864.0 million (US$117.8 million) of financial assets—current. Our financial assets—current primarily consisted of structured time deposits and swap contracts. As of December 31, 2015, we had total unused credit lines of NT$159,252.9 million (US$4,856.8 million). As of December 31, 2015, we had working capital of NT$34,094.4 million (US$1,039.8 million).

 

As of December 31, 2015, we had total borrowings of NT$120,361.8 million (US$3,670.7 million), of which NT$36,983.4 million (US$1,127.9 million) were short-term debts and NT$83,378.4 million (US$2,542.8 million) were long-term debts. Our short-term debts consist of bank loans and bills payable. In 2015, the maximum amount of our short-term debts was NT$53,558.1 million (US$1,633.4 million) and the average amount of our short-term debts was NT$41,931.6 million (US$1,278.8 million). The fluctuation was primarily because our working capital balance fluctuated during 2015 from time to time. The annual interest rate for borrowings under our short-term bank loans and bills payable ranged from 0.57% to 5.78% as of December 31, 2015. Our short-term bank loans are primarily revolving facilities with a term of one year, each of which may be extended on an annual basis with lender consent. Our long-term debts consist of bank loans, bills payable, bonds payable and capital lease obligations. As of December 31, 2015, we had outstanding long-term debts, less current portion, of NT$66,535.1 million (US$2,029.1 million). As of December 31, 2015, the current portion of our long-term debts was NT$16,843.3 million (US$513.7 million). Our long-term bank loans and bills payable typically carried variable annual interest rates which ranged between 0.90% to 5.39% as of December 31, 2015. For the maturity information and interest rates by currencies, see “Item 11—Quantitative and Qualitative Disclosures about Market Risk—Market Risk—Interest Rate Risk.”

 

We have pledged a portion of our assets, with a carrying value of NT$16,542.1 million (US$504.5 million) as of December 31, 2015, to secure our obligations under our short-term and long-term facilities.

 

In September 2011, Anstock Limited, our wholly owned subsidiary incorporated in the Cayman Islands with limited liability, issued RMB150.0 million 3.125% Guaranteed Bonds due September 22, 2014 and RMB500.0 million 4.250% Guaranteed Bonds due September 20, 2016. The 2014 and 2016 Bonds were offered to certain non-U.S. persons in compliance with Regulation S under the Securities Act. The 2014 and 2016 Bonds are irrevocably and unconditionally guaranteed on an unsecured and unsubordinated basis by us. The 2014 Bonds matured and were repaid on September 22, 2014. The 2016 Bonds bear interest from and including September 20, 2011 at the rate of 4.250% per annum. Interest on the 2016 Bonds is payable semi-annually in arrear on September 20 and March 20 of each year beginning on March 20, 2012. The 2016 Bonds will mature on September 20, 2016 unless previously redeemed or repurchased and cancelled. The net proceeds from the 2014 and 2016 Bonds were advanced by Anstock Limited to ASESH AT in the form of an intercompany RMB loan for working capital and capital expenditure with maturity in September 2016.

 

In July 2014, Anstock II Limited offered US$300.0 million aggregate principal amount of guaranteed bonds due 2017. The Green Bonds are unconditionally and irrevocably guaranteed by us. The Green Bonds were offered to persons outside of the United States in compliance with Regulation S under the Securities Act. The Green Bonds bear interest from and including July 24, 2014 at the rate of 2.125% per annum. Interest on the Green Bonds is payable semi-annually in arrear on January 24 and July 24 of each year beginning on January 24, 2015. The Green Bonds will mature on July 24, 2017 unless previously redeemed or repurchased and cancelled. The net proceeds from the Green Bonds offering were used to fund projects that promote our transition to low-carbon and climate-resilient growth.

 

In August 2011, we issued NT$8.0 billion 1.45% secured corporate bonds with five year term, guaranteed by the Bank of Taiwan, Mega International Commercial Bank, Taiwan Cooperative Bank, First Bank and Hua Nan Bank. The Corporate Bonds bear an annual simple interest and payment by coupon rate from the issue date. The net proceeds from the Corporate Bonds were used to repay our previous debts.

 

In September 2013, we issued US$400.0 million aggregate principal amount of zero coupon convertible bonds due 2018. The 2018 Convertible Bonds were offered to persons outside of the United States in compliance with Regulation S under the Securities Act. The initial conversion price was NT$33.085 per common share, subject to certain adjustments, determined on the basis of a fixed exchange rate of NT$29.956 = US$1.00 (which represents an approximately 31.3% conversion premium over the closing trading price of our common shares on August 28, 2013 of NT$25.20 per common share). The conversion price is subject to adjustment upon the occurrence of certain events, such as the Capital Increase and cash dividend distribution. As of the date of this annual report, the conversion price is NT$30.28 per common share. The bonds will mature on September 5, 2018, unless previously repurchased or converted in accordance with their terms prior to such date. We used the net proceeds to fund procurement of raw materials from overseas. Please refer to note 18 of our consolidated financial statements included in this annual report for more information. As of December 31, 2015, the balance of the outstanding convertible bonds was US$400.0 million.

 

71

In July 2015, we issued US$200.0 million aggregate principal amount of NTD-linked zero coupon convertible bonds due 2018. The 2018 NTD-linked Convertible Bonds were offered to persons outside of the United States in compliance with Regulation S under the Securities Act. The initial conversion price was NT$54.5465 per common share, subject to certain adjustments, determined on the basis of a fixed exchange rate of NT$30.928 = US$1.00 (which represents an approximately 27.0% conversion premium over the closing trading price of our common shares on June 25, 2015 of NT$42.95 per common share). The conversion price is subject to adjustment upon the occurrence of certain events, such as the cash dividend distribution. As of the date of this annual report, the conversion price is NT$51.73 per common share. The bonds will mature on March 27, 2018, unless previously repurchased or converted in accordance with their terms prior to such date. We used the net proceeds to fund procurement of equipment from overseas. Please refer to note 18 of our consolidated financial statements included in this annual report for more information. As of December 31, 2015, the balance of the outstanding convertible bonds was US$200.0 million.

 

In January 2016, we issued NT$7,000.0 million (US$213.5 million) 1.30% unsecured corporate bonds with five year term and NT$2,000.0 million (US$61.0 million) 1.50% unsecured corporate bonds with seven year term. The bonds bear an annual simple interest and payment by coupon rate from the issue date. The net proceeds from the bonds were used to repay our previous debts.

 

We currently have one syndicated loan agreement outstanding. In July 2013, we entered into a US$400.0 million five-year syndicated credit facility, for which the Bank of Taiwan acted as the agent bank, for the purpose of funding the purchase of machinery and equipment at our facility and funding general operations. As of December 31, 2015, NT$11,160.5 million (US$340.4 million) was outstanding under this credit facility. This syndicated loan agreement contains undertakings and restrictive covenants relating to the maintenance of certain financial ratios including: (i) current ratio (current assets to current liabilities) of not less than 100.0%; (ii) leverage ratio (total liabilities to tangible net worth) of not higher than 160.0%; (iii) interest coverage ratio (EBITDA to interest expense) of not less than 280.0%; and (iv) tangible net worth not less than NT$75,000.0 million.

 

We have in the past failed to comply with certain financial covenants in some of our loan agreements. Such non-compliance may also have, through broadly worded cross-default provisions, resulted in default under some of the agreements governing our other existing debt. As of December 31, 2015, we were not in breach of any of the financial covenants under our existing loan agreements. If we are unable to timely remedy any of our non-compliance under such loan agreements or obtain applicable waivers or amendments, we would breach our financial covenants and our financial condition would be adversely affected. See “Item 3. Key Information—Risk Factors—Risks Relating to Our Business—Restrictive covenants and broad default provisions in our existing debt agreements may materially restrict our operations as well as adversely affect our liquidity, financial condition and results of operations.”

 

Our contingent obligations consist of guarantees provided by us to our subsidiaries. As of December 31, 2015, we endorsed and guaranteed the bonds issued by our subsidiaries, Anstock Limited, in the amount of RMB500.0 million (US$77.2 million) and Anstock II Limited, in the amount of US$300.0 million, respectively. Other than such guarantees, we have no other contingent obligations.

 

We have made, and expect to continue to make, substantial capital expenditures in connection with the expansion of our production capacity. The table below sets forth our principal capital expenditures incurred for the periods indicated.

 

    Year Ended December 31,
    2013   2014   2015
    NT$   NT$   NT$   US$
    (in millions)
Machinery and equipment     19,851.7       31,735.5       18,318.4       558.7  
Building and improvements     7,192.4       11,713.1       9,962.4       303.8  
Total     27,044.1       43,448.6       28,280.8       862.5  

 

72

We had commitments for capital expenditures of approximately US$246.7 million, of which US$53.6 million had been paid as of December 31, 2015, primarily in connection with the expansion of our packaging and testing services operations. We estimate that our environmental capital expenditures for 2016 will be approximately US$35.0 million. We may adjust our capital expenditures based on market conditions, the progress of our expansion plans and cash flow from operations. In addition, due to the rapid changes in technology in the semiconductor industry, we frequently need to invest in new machinery and equipment, which may require us to raise additional capital. We cannot assure you that we will be able to raise additional capital should it become necessary on terms acceptable to us or at all. See “Item 3. Key Information—Risk Factors—Risks Relating to Our Business—The packaging and testing businesses are capital intensive. If we cannot obtain additional capital when we need it, our growth prospects and future profitability may be adversely affected.”

 

We believe that our existing cash, marketable securities, expected cash flow from operations and existing credit lines under our loan facilities will be sufficient to meet our capital expenditures, working capital, cash obligations under our existing debt and lease arrangements, and other requirements for at least the next 12 months. We currently hold cash primarily in U.S. dollars, RMB, New Taiwan dollars, Korean Won and Japanese yen. As of December 31, 2015, we had contractual obligations of NT$86,260.8 million (US$2,630.7 million) due in the next three years. We currently expect to meet our payment obligations through the expected cash flow from operations, long-term borrowings and the issuance of additional equity or equity-linked securities. We will continue to evaluate our capital structure and may decide from time to time to increase or decrease our financial leverage through equity offerings or borrowings. The issuance of additional equity or equity-linked securities may result in additional dilution to our shareholders.

 

From time to time, we evaluate possible investments, acquisitions or divestments and may, if a suitable opportunity arises, make an investment, acquisition or divestment.

 

Our treasury team, under the supervision of our chief financial officer, is responsible for setting our funding and treasury policies and objectives. Our exposure to financial market risks relates primarily to changes in interest rates and foreign currency exchange rates. To mitigate these risks, we utilize derivative financial instruments, the application of which is primarily to manage these exposures, and not for speculative purposes.

 

We have, from time to time, entered into interest rate swap transactions to hedge our interest rate exposure. In addition, we have, from time to time, entered into forward exchange contracts, swap contracts, cross currency swap contracts and European foreign currency options contracts to hedge our existing assets and liabilities denominated in foreign currencies. See “Item 11. Quantitative and Qualitative Disclosures about Market Risk” and notes 7 and 31 to our consolidated financial statements included in this annual report.

 

RESEARCH AND DEVELOPMENT

 

For 2013, 2014 and 2015, our research and development expenditures totaled approximately NT$9,064.7 million, NT$10,289.7 million and NT$10,937.5 million (US$333.6 million), respectively. These expenditures represented approximately 4.1%, 4.0% and 3.8% of operating revenues in 2013, 2014 and 2015, respectively. We have historically expensed all research and development costs as incurred and none is currently capitalized. As of February 29, 2016, we employed 7,202 employees in research and development.

 

Packaging

 

We centralize our research and development efforts in packaging technology in our Kaohsiung, Taiwan facilities. After initial phases of development, we conduct pilot runs in one of our facilities before new technologies or processes are implemented commercially at other sites. Facilities with special product expertise, such as ASE Korea, also conduct research and development of these specialized products and technologies at their sites. One of the areas of emphasis for our research and development efforts is improving the efficiency and technology of our packaging processes and these efforts are expected to continue. We are also putting significant research and development efforts into the development and adoption of innovative technology. We work closely with manufacturers of our packaging equipment and materials in designing and developing the equipment and materials used in our production process. We also collaborate with our significant customers to co-develop new product and process technologies.

 

73

In addition to investing in the development of more advanced packaging technology and improving production efficiency, a significant portion of our research and development efforts is focused on the development of IC substrate production technology for BGA packaging. Substrate is the principal raw material for BGA packages. Development and production of IC substrates involve complex technology. We are currently working closely with certain first-tier substrate suppliers in Asia, primarily including those located in Japan, Taiwan and Korea. We believe that our successful cooperation with substrate suppliers to enhance the overall substrate production capability and to meet future package requirements has enabled us to capture an increasingly important value-added component of the packaging process, helped ensure a stable and cost-effective supply of substrates for our BGA packaging operations and shortened time to market.

 

Testing

 

Our research and development efforts in the area of testing have focused primarily on developing testing software and solutions, including logic/mixed-signal/RF/(2.5D/3D) module and SiP /discrete semiconductors, characterization of semiconductors, layout design, electrical simulation for high frequency test board and developing software of parametric test data analysis. We work closely with our customers on the leading edge test technologies, such as 3D IC test and advanced probe test technology such as very fine pitch probe card. Our research and development operations also include an equipment development group, which currently designs testing hardware and software for specific semiconductors to offer our customers cost effective test solutions.

 

Electronic manufacturing services

 

To further enhance the quality of our services and products, we focus on developing diversified and innovative products to improve our competitiveness. By leveraging our proprietary research and development expertise, we are able to optimize our product design, engineering and manufacturing capabilities to provide our customers with high performance and cost-effective products and services. During the process of designing, as well as developing the technology for, our software and hardware, our research and development team also dedicates itself to discovering new know-how, and then applying such know-how to create new, advanced and improved products, processes, methodology and services. We are currently investing in the development of products used in electronic manufacturing services in relation to computers and peripherals, communications, industrial, automotive, and storage and server applications.

 

TREND INFORMATION

 

Other than as disclosed elsewhere in this annual report, we are not aware of any trends, uncertainties, demands, commitments or events for the period from January 1, 2015 to December 31, 2015 that are reasonably likely to have a material effect on our operating revenues, income, profitability, liquidity or capital resources, or that caused the disclosed financial information to be not necessarily indicative of future operating results or financial conditions.

 

OFF-BALANCE SHEET ARRANGEMENTS

 

There are no off-balance sheet arrangements that have or are reasonably likely to have a current or future effect on our financial condition, changes in financial condition, revenues or expenses, results of operations, liquidity, capital expenditures or capital resources that are material to investors.

 

TABULAR DISCLOSURE OF CONTRACTUAL OBLIGATIONS

 

The following table sets forth the maturity of our contractual obligations as of December 31, 2015.

 

74

    Payments Due by Period
    Total   Under
1 Year
  1 to 3 Years   3 to 5 Years   After
5 Years
    NT$   NT$   NT$   NT$   NT$
    (in millions)
Contractual Obligations:                                        
Long-term debt (1)     86,687.3       28,932.1       53,981.6       2,998.3       775.3  
Capital lease obligations (2)     401.8       100.3       5.9       295.6       -  
Operating leases (3)     1,027.4       211.2       241.6       111.9       462.7  
Purchase obligations (4)     2,788.1       2,788.1       -       -       -  
Total (5)(6)(7)(8)     90,904.6       32,031.7       54,229.1       3,405.8       1,238.0  

____________ _________________

(1) Includes long-term borrowings and bonds payable (before the deduction of unamortized arrangement fees, unamortized issuance cost and discounts on bonds payable) and interest payments.

 

(2) Represents our commitments under property leases and imputed interest. These obligations are recorded on our consolidated balance sheets under the line item of other non-current liabilities.

 

(3) Represents our commitments under leases for land, machinery and equipment such as testers, and office buildings and equipment. See note 34 to our consolidated financial statements included in this annual report.

 

(4) Represents unpaid commitments for construction. These commitments were not recorded on our consolidated balance sheets as of December 31, 2015. See note 34 to our consolidated financial statements included in this annual report. Total commitments for construction of buildings were approximately NT$4,338.5 million (US$132.3 million), of which NT$1,550.4 million (US$47.3 million) had been paid as of December 31, 2015.

 

(5) Excludes non-binding commitments to purchase machinery and equipment of approximately NT$3,750.7 million (US$114.4 million), of which NT$206.6 million (US$6.3 million) had been paid as of December 31, 2015. See note 34 to our consolidated financial statements included in this annual report.

 

(6) Excludes unpaid amounts that we were contracted for the construction related to our real estate business of approximately NT$2,745.4 million (US$83.7 million) as of December 31, 2015, since the schedule of payments is difficult to determine. See note 34 to our consolidated financial statements included in this annual report.

 

(7) Excludes our unfunded defined benefit obligation since the schedule of payments is difficult to determine. Under defined benefit pension plans, we made pension contributions of approximately NT$611.6 million (US$18.7 million) in 2015, and we estimate that we will contribute approximately NT$705.4 million (US$21.5 million) in 2016. See note 20 to our consolidated financial statements included in this annual report.

 

(8) Excludes uncertain tax liabilities. We recognized additional taxes payable of NT$89.8 million (US$2.7 million) and accrued interest and penalties of NT$15.0 million (US$0.5 million) related to uncertain tax positions as of or for the year ended December 31, 2015. Because we were unable to make a reasonable estimate of the timing of the tax audits, such balances were not included in the table.

 


SAFE HARBOR

 

Please see the section entitled “Special Note Regarding Forward-Looking State ments.”

 

Item 6. Directors, Senior Management and Employees

 

DIRECTORS AND SENIOR MANAGEMENT

 

Directors

 

Our board of directors is elected by our shareholders in a general meeting at which a quorum, consisting of a majority of all issued and outstanding common shares, is present. The chairman is elected by the board from among the directors. Our eleven-member board of directors, including three independent directors, is responsible for the management of our business.

 

We currently have eleven directors, serving a three-year term. The current board of directors began serving on June 24, 2015. Directors may serve any number of consecutive terms and may be removed from office at any time by a resolution adopted at a meeting of shareholders. Normally, all board members are elected at the same meeting of shareholders, except where the posts of one-third or more of the directors are vacant, at which time an extraordinary shareholders’ meeting shall be convened to elect directors to fill the vacancies. We and our subsidiaries do not have service contracts with our directors that provide for benefits upon termination of employment.

 

75

Our audit committee currently consists of our independent directors, Shen-Fu Yu, Ta-Lin Hsu and Mei-Yueh Ho, who are independent under Rule 10A-3 and the ROC Securities and Exchange Act and are financially literate with accounting or related financial management expertise. The audit committee has responsibility for, among other things, overseeing the qualifications, independence and performance of our independent auditors and the integrity of our financial statements.

 

Our compensation committee currently consists of Shen-Fu Yu and Ta-Lin Hsu, our independent directors, and Hsiao-Ying Ku. Our board of directors established a compensation committee to satisfy the requirements under the ROC Securities Exchange Act. Under ROC securities regulations, a compensation committee should have at least one independent director who is considered independent under ROC securities regulations. We do not assess the independence of our compensation committee member under the independence requirements of the NYSE listing standards but adopt the independence standard as promulgated under the ROC Regulations Governing the Appointment and Exercise of Powers by the Remuneration Committee of a Company Whose Stock is Listed on the Stock Exchange or Traded Over the Counter. See “Item 16G. Corporate Governance” for more information. Our compensation committee meets at least twice a year. Our board of directors has adopted an compensation committee charter for our compensation committee. The compensation committee has responsibility for, among other things, setting forth and reviewing policies, systems, standards and structures regarding performance evaluation and compensation of the directors, managerial personnel, and evaluating compensation of the directors and managerial personnel.

 

The following table sets forth information regarding all of our directors as of March 31, 2016. In accordance with ROC law, each of our directors is elected either in his or her capacity as an individual or as an individual representative of a corporation or government. Persons designated to represent corporate or government shareholders as directors are typically nominated by such shareholders at the annual general meeting and may be replaced as representatives by such shareholders at will. Of the current directors, six represent ASE Enterprises Limited. The remaining directors serve in their capacity as individuals.

 

Name

Position

Director
Since

Age

Other Significant
Positions Held Outside of the ASE Group

Jason C.S. Chang (1)(2) Director, Chairman and Chief Executive Officer 1984 71 None
Richard H.P. Chang (1) Director, Vice Chairman and President 1984 69 Chairman, Sino Horizon Holdings Ltd.
Rutherford Chang (3) Director and General Manager of China Region 2009 36 None
Tien Wu (2) Director and Chief Operating Officer 2003 58 None
Joseph Tung (2) Director and Chief Financial Officer 1997 57 Independent director, Ta Chong Bank Ltd.
Raymond Lo (2) Director and General Manager, Kaohsiung packaging facility 2006 62 None
Tien-Szu Chen (2) Director and General Manager, ASE Inc. Chung-Li branch 2015 54 None
Jeffrey Chen (2) Director and General Manager of Corporate Affairs and Strategy of China Region 2003 52 None
Shen-Fu Yu Independent Director and Member, Audit Committee and Compensation Committee 2009 71 Independent director, Yulon Motor Co., Ltd.; director, Arima Lasers Corporation; supervisor, Dynapak International Technology Corporation, San Fu Chemical Co., Ltd., and Arima Communications
Ta-Lin Hsu Independent Director and Member, Audit Committee and Compensation Committee 2009 72 Chairman and founder, H&Q Asia Pacific; Chairman, H&Q Taiwan Co. Ltd.
Mei-Yueh Ho Independent Director and Member, Audit Committee 2015 65 Independent Director, Bank of Kaohsiung, Ltd., KINPO Electronics Inc., AU Optronics Corp. and Ausnutria Dairy Corporation Ltd.

__ __________________

(1) Jason C.S. Chang and Richard H.P. Chang are brothers.

 

(2) Representative of ASE Enterprises Limited, a company organized under the laws of Hong Kong, which held 16.76% of our total outstanding shares as of March 31, 2016. All of the outstanding shares of ASE Enterprises Limited are held through intermediary holding companies and under a revocable trust established under the laws of the Bailiwick of Guernsey for the benefit of our Chairman and Chief Executive Officer, Jason C.S. Chang, and his family.

 

(3) Rutherford Chang is the son of Jason C.S. Chang.

 

76

Audit Committee

 

For a discussion of our audit committee, see “—Directors and Senior Management—Directors.”

 

Executive Officers

 

The following table sets forth information regarding all of our executive officers as of March 31, 2016.

 

Name

Position

Years with the Company

Age

Jason C.S. Chang   Chairman and Chief Executive Officer 32 71
Richard H.P. Chang   Vice Chairman and President; Chairman, Universal Scientific Shanghai 32 69
Rutherford Chang   General Manager, China Region 11 36
Tien Wu   Chief Operating Officer 16 58
Joseph Tung   Chief Financial Officer 21 57
Raymond Lo   General Manager, ASE Test Taiwan; General Manager, Kaohsiung packaging facility 29 62
Tien-Szu Chen   General Manager, ASE Inc. Chung-Li branch 27 54
Chun-Che Lee   General Manager, ASE Electronics 31 56
Ung Bae   General Manager, ASE Korea 16 59
Chih-Hsiao Chung   General Manager, ASE Japan and Wuxi Tongzhi 16 51
Chiu-Ming Cheng   General Manager, ASESH AT 25 55
Chih-An Hsu   General Manager, ASEKS 19 53
Yen-Chieh Tsao   General Manager, ASEWH 4 58
Shih-Kang Hsu   Chief Executive Officer, ASEN 15 50
Meng-Hui Lin   General Manager, ASE Shanghai 22 49
Kwai Mun Lee   President, ASE South-East Asia operations 17 53
Lid Jian Chiou   General Manager, ASE Singapore Pte. Ltd. 12 59
Kenneth Hsiang   General Manager, ISE Labs 16 46
Chen-Yen Wei   Chairman, Universal Scientific; Chairman, USI Inc.; President, Universal Scientific Shanghai 36 61
Feng-Ta Chen   General Manager, UGJQ 18 53
Jack Hou   General Manager, UGTW 22 59
Ta-I Lin   General Manager, UGKS 28 52
Yueh-Ming Lin   General Manager, USISZ 20 50
Omar Anaya Galván   General Manager, USI Mexico 13 46

 

77

Biographies of Directors and Executive Officers

 

Jason C.S. Chang has served as Chairman of ASE Inc. since its founding in March 1984 and as its Chief Executive Officer since May 2003. Mr. Chang holds a bachelor’s degree in electrical engineering from National Taiwan University in Taiwan and a master’s degree from the Illinois Institute of Technology. He is the brother of Richard H.P. Chang, our Vice Chairman and President.

 

Richard H.P. Chang has served as Vice Chairman of ASE Inc. since November 1999 after having served as President of ASE Inc. since its founding in March 1984, and served as Chief Executive Officer of ASE Inc. from July 2000 to April 2003. In February 2003, he was again appointed President of ASE Inc. upon the retirement of Mr. Leonard Y. Liu. Mr. Chang has also served as the Chairman of Universal Scientific Industrial (Shanghai) Co., Ltd. since June 2008. Mr. Chang holds a bachelor’s degree in industrial engineering from Chung Yuan Christian University in Taiwan. He is the brother of Jason C.S. Chang, our Chairman and Chief Executive Officer.

 

Rutherford Chang has served as a director of ASE Inc. since June 2009 and General Manager of China Region of ASE Group. since June 2010. He joined ASE Group in March 2005. Mr. Chang holds a bachelor’s degree in psychology from Wesleyan University in Connecticut. He is the son of Jason C.S. Chang, our Chairman and Chief Executive Officer.

 

Tien Wu has served as a director of ASE Inc. since June 2003 and Chief Operating Officer since April 2006, prior to which he served as the President of Worldwide Marketing and Strategy of the ASE Group. Prior to joining ASE Inc. in March 2000, Mr. Wu held various managerial positions with IBM. Mr. Wu holds a bachelor’s degree in civil engineering from National Taiwan University in Taiwan, a master’s degree and a doctorate degree in mechanical engineering and applied mechanics from the University of Pennsylvania.

 

Joseph Tung has served as a director of ASE Inc. since April 1997 and Chief Financial Officer since December 1994. He is also an independent director of Ta Chong Bank Ltd. since October 2007. Before joining ASE Inc., Mr. Tung was a Vice President at Citibank, N.A. Mr. Tung holds a bachelor’s degree in economics from the National Chengchi University in Taiwan and a master’s degree in business administration from the University of Southern California.

 

Raymond Lo has served as a director of ASE Inc. since May 2006 and General Manager of our packaging facility in Kaohsiung, Taiwan since April 2006. Mr. Lo also served as a supervisor of ASE Inc. between July 2000 and May 2006. Before joining ASE Group, Mr. Lo was the Director of Quality Assurance at Zeny Electronics Co. Mr. Lo holds a bachelor’s degree in electronic physics from the National Chiao Tung University in Taiwan.

 

Tien-Szu Chen has served as a director of ASE Inc. since June 2015 and General Manager of ASE Inc. Chung-Li branch since August 2015. Prior to his current position, Mr. Chen served as our supervisor from June 2006 to June 2015 and as President of Power ASE Technology Inc. from June 2006 to May 2012. He also held several key management positions within the ASE Group from June 1988 to June 2006, including President of ASE Inc. Chung-Li branch and Senior Vice President of ASE Inc. Prior to joining ASE Group in June 1988, Mr. Chen worked at TSMC and Philips Semiconductor Kaohsiung. Mr. Chen received his bachelor’s degree in industrial engineering from Chung Yuan Christian University in Taiwan.

 

78

Jeffrey Chen has served as a director of ASE Inc. since June 2003 and General Manager of Corporate Affairs and Strategy of China Region. Prior to joining ASE Inc., he worked in the corporate banking department of Citibank, N.A. in Taipei and as a Vice President of corporate finance at Bankers Trust in Taipei. Mr. Chen holds a bachelor’s degree in finance and economics from Simon Fraser University in Canada and a master’s degree in business administration from the University of British Columbia in Canada.

 

Shen-Fu Yu has served as an independent director of ASE Inc. since June 2009 and as an independent director of Yulon Motor Co., Ltd. He is also a director of Arima Lasers Corporation and a supervisor of Dynapack International Technology Corporation, San Fu Chemical Co., Ltd., and Arima Communications. Mr. Yu is also a member of the audit committee and compensation committee of ASE Inc.. Mr. Yu also serves on the compensation committee of Yulon Motor Co., Ltd., Taiwan Acceptance Corporation and Elite Material Co., Ltd. He worked at Deloitte & Touche Accounting Firm as a consultant from June 2003 to November 2006. Mr. Yu holds a bachelor’s degree in accounting from National Taiwan University in Taiwan and a master’s degree in accounting from National Chengchi University in Taiwan.

 

Ta-Lin Hsu has served as an independent director of ASE Inc. since June 2009. He is also a member of the audit committee and compensation committee of ASE Inc.. He is currently the chairman and founder of H&Q Asia Pacific and chairman of H&Q Taiwan Co. Ltd. Mr. Hsu holds a bachelor’s degree in physics from National Taiwan University, a master’s degree in electrophysics from the Polytechnic Institute of Brooklyn and a doctorate degree in electrical engineering from the University of California, Berkeley.

 

Mei-Yueh Ho has served as an independent director and a member of the audit committee of ASE Inc. since June 2015. Ms. Ho is also an independent director of the Bank of Kaohsiung, Ltd., KINPO Electronics Inc., AU Optronics Corp. and Ausnutria Diary Corporation Ltd. She is also a member of the audit committee of the Bank of Kaohsiung, Ltd. and AU Optronics Corp., and a member of the compensation committee of the Bank of Kaohsiung, Ltd., KINPO Electronics Inc. and AU Optronics Corp. Ms. Ho served as Minister of Ministry of Economic Affairs, ROC from May 2004 to January 2006. She was also Chairperson of the Council for Economic Planning and Development, ROC from May 2007 to May 2008. Ms. Ho holds a bachelor’s degree in agricultural chemistry from National Taiwan University in Taiwan.

 

Chun-Che Lee has served as a General Manager of ASE Electronics Inc. since August 2011, prior to which he was a vice president, director and manager of research and development at ASE Inc. since 1984. Mr. Lee holds a bachelor’s degree in aeronautics from Tamkung University in Taiwan.

 

Ung Bae has served as General Manager of ASE (Korea) Inc. since July 2008, after serving as Senior Vice President of ASE (Korea) Inc. since July 1999. Mr. Bae was Vice President of Motorola Korea, Limited before joining ASE (Korea) Inc. when we acquired Motorola Korea, Limited. He holds a degree in electronic engineering from In-Ha University in Korea.

 

Chih-Hsiao Chung has served as General Manager of ASE Japan Co. Ltd. since March 2011, General Manager of Wuxi Tongzhi Microelectronics Co., Ltd. since June 2013, and Chairman and CEO of ASEEE since September 2015. Mr. Chung has also managed the sales and marketing of ASE Japan Co. Ltd. region since April 2007. Before joining ASE Group, Mr. Chung was the Senior Manager of Sale and Marketing at Kimberly Clark Co., Taiwan. He holds a master’s degree in business administration from the University of Wisconsin-Madison.

 

Chiu-Ming Cheng has served as General Manager of ASE Assembly & Test (Shanghai) Limited since September 2012, after serving as Vice President of ASE’s Kaohsiung packaging facility since October 2004. He joined ASE Group in April, 1990. Mr. Cheng holds a master’s degree in public policy from National Sun Yat-Sen University in Taiwan.

 

Chih-An Hsu has served as General Manager of ASE (KunShan) Inc. since July 2012, after serving as Vice President of ASE's Chung-Li since July 2006. He joined ASE Group in February 1997. Mr. Hsu holds a bachelor’s degree in industrial engineering from National Tsing Hua University in Taiwan.

 

Yen-Chieh Tsao has served as General Manager of ASE (Weihai), Inc. since October 2013 after serving as Vice President of ASE’s Chung-Li since October 2011. Mr. Tsao was the Vice President of Motorola Electronics Taiwan Ltd. prior to joining ASE Group. He holds a bachelor’s degree in physics from the Chinese Culture University in Taiwan.

 

79

Shih-Kang Hsu has served as Chief Executive Officer of Suzhou ASEN Semiconductors Co., Ltd. since August 2010, after serving as Senior Vice President of ASE (U.S.) Inc. since June 2006. He joined ASE Group in June 2000. Mr. Hsu holds a master’s degree in mechanical engineering from Case Western Reserve University.

 

Meng-Hui Lin has served as General Manager of ASE (Shanghai) Inc. since Oct 2014. He joined ASE Group in 1994, and has worked in various fields with ASE Group, e.g., IE, quality engineering, process engineering, research & development and manufacturing management. He holds a master’s degree in industrial engineering from Texas A&M University.

 

Kwai Mun Lee has served as President of our Southeast Asia operations, with responsibility for the operations of our Penang, Malaysia and Singapore manufacturing facilities, since March 2006. Before joining the ASE Group, Mr. Lee held senior management positions at Chartered Semiconductor and STATS ChipPAC. He started his career as an engineer at Intel. He holds a degree in engineering from the Swinburne Institute of Technology in Australia.

 

Lid Jian Chiou has served as General Manager of ASE Singapore Pte. Ltd. since September 2010 after serving as Senior Director of Operations since November 2003. Prior to that, he worked several years with Texas Instruments and Chartered Semiconductor. Mr. Chiou holds a master’s degree in business administration from the State University of New York and a bachelor’s degree in engineering from the University of Strathclyde in the United Kingdom .

 

Kenneth Hsiang has served as General Manager of ISE Labs, Inc. since June 2004. Prior to joining ASE Group in November 1999, Mr. Hsiang worked in management positions within finance and strategic analysis in the healthcare and biotech industries in the San Francisco Bay area in California. He also worked for Price Waterhouse LLP as a Certified Public Accountant. Mr. Hsiang received a bachelor’s degree in economics & rhetoric from the University of California, Berkeley.

 

Chen-Yen Wei has served as Chairman of Universal Scientific Industrial Co., Ltd. since July 2014, Chairman of USI Inc. since April 2015, and President of Universal Scientific Industrial (Shanghai) Co., Ltd. since April 2008. He joined Universal Scientific Industrial Co., Ltd. as an engineer in August 1979. He holds a bachelor’s degree in communication engineering from National Chiao Tung University in Taiwan.

 

Feng-Ta Chen has served as General Manager of Universal Global Technology (Shanghai) Co., Ltd. since September 2013. He joined Universal Scientific Industrial Co., Ltd. as a Wireless Product PLM Department head in July 1997. He holds a bachelor’s degree in literature from the Chinese Culture University in Taiwan.

 

Jack Hou has served as General Manager of Universal Global Scientific Industrial Co., Ltd. since January 2010 and Vice President of Automotive & Visual Product Devices and Module Turnkey Management Business Unit of Universal Scientific Industrial Co., Ltd. since April 2012. He joined Universal Scientific Industrial Co., Ltd. as a section manager in February 1994. He holds a master’s degree in biomedical engineering from Ohio State University and a master’s degree in computer science from the University of Dayton in Ohio.

 

Ta-I Lin has served as General Manager of Universal Global Technology (Kunshan) Co. Ltd. since August 2011. He joined Universal Scientific Industrial Co., Ltd. as an engineer in August 1987. He holds a bachelor’s degree in electrical engineering from National Cheng Kung University in Taiwan and an executive master of business administration from Peking University in China.

 

Yueh-Ming Lin has served as General Manager of USI Electronics (Shenzhen) Co. Ltd. since January 2015 and Senior Director of Global Operation Management (Shenzhen) Division of USI Electronics (Shenzhen) Co. Ltd. since March 2014. He joined Universal Scientific Industrial Co., Ltd. as a section manager in October 1995. He holds a bachelor’s degree in electrical engineering from Feng Chia University in Taiwan.

 

Omar Anaya Galván has served as General Manager of Universal Scientific Industrial De Mexico S.A. DE C.V. since March 2015. He has worked in the electronics industry for over 24 years and has experience in various technical, quality and manufacturing management roles. He has been working at Universal Scientific Industrial (Shanghai) Co., Ltd. and its directly and indirectly held subsidiaries since March 2003. He holds a bachelor’s degree in electronic systems engineering from the Monterrey Institute of Technology and Higher Education in Mexico.

80

The business address of our directors and executive officers is our registered office.

 

COMPENSATION

 

In 2015, we recorded expenses of approximately NT$833.9 million (US$25.4 million) as remuneration to our directors and executive officers. We did not pay any remuneration in kind to our directors or executive officers in 2015. In 2015, we accrued pension costs of NT$2.3 million (US$0.1 million) for retirement benefits for our management. In April 2016, our board of directors passed a resolution and increased the remuneration of our independent directors from NT$2.0 million (US$0.06 million) to NT$3.0 million (US$0.09 million) per person per year. This proposal is subject to the approval of our annual general shareholders’ meeting in June 2016. In addition, according to our Articles of Incorporation, not more than 1% of our annual net earnings (after recovering any losses incurred in prior years and deducting the legal reserve, special reserve provisions and other items as required under ROC law, if any) may be distributed as bonuses to our directors. 7% to 11% of our annual net earnings (after recovering any losses incurred in prior years and deducting the legal reserve, special reserve provisions and other items as required under ROC law, if any) may be distributed as a bonus to employees, including executive officers. In January 2016, our board of directors proposed to amend our Articles of Incorporation to distribute employees’ compensation, including executive officers, and remuneration to directors at the rates in 5.25%-8.25% and no higher than 0.75%, respectively, of net profit before income tax, employees’ compensation and remuneration to directors. This proposal is subject to the approval of our annual general shareholders’ meeting in June 2016.

 

We have not provided any loans to or guarantees for the benefit of any of our directors or executive officers. For information regarding our pension and other retirement plans and those of our subsidiaries, see note 20 to our consolidated financial statements included in this annual report.

 

ASE Inc. Employee Bonus and Stock Option Plans

 

We award bonuses to employees of ASE Inc. and its subsidiaries who are located in Taiwan based on overall income and individual performance targets. Prior to 2009, these employees were eligible to receive bonuses in the form of our common shares valued at par. Beginning in 2009, employees are eligible to receive bonuses in the form of our common shares valued at the closing price (after adjustment with consideration of the effects on the share price, if any, brought by cash and stock dividends resolved at shareholders’ meetings) of our common shares on the day prior to our shareholders’ meeting. Actual amounts of bonuses to individual employees are determined based upon the employee meeting specified individual performance objectives. We granted aggregate values of NT$1,147.2 million, NT$1,587.3 million and NT$2,335.6 million (US$71.2 million) as cash bonus to our employees in 2013, 2014 and 2015, respectively.

 

We currently maintain three option plans, adopted in 2007, 2010 and 2015. The option plan adopted in 2004 expired in May 2015. Pursuant to these plans, our full-time employees, including domestic and foreign subsidiaries, are eligible to receive stock option grants. Each option entitles the holder to purchase one ASE Inc. common share at a price equal to (for the 2007 plan), or not less than (for the 2010 and 2015 plans), the closing market price on the date of the option issuance, such exercise price being subject to retroactive adjustment in the event of certain capital transactions in subsequent periods. Each option is valid for ten years from the date of the grant. 40.0% of the options originally granted vest upon the second anniversary of the grant date, and an additional 10.0% of the options originally granted vest every six months thereafter. Each option expires at the end of the tenth year following its grant date. The options are generally not transferable. As of December 31, 2015, a total of 185,806,000 options had been granted under the 2007 plan. The original exercise price under the 2007 plan was NT$30.65 per share (currently adjusted to NT$21.1 per share). As of December 31, 2015, a total of 199,999,500 options had been granted under the 2010 plan, 187,719,500 of which had an original exercise price of NT$28.6 per share (currently adjusted to NT$20.4 per share) and 12,280,000 of which had an original exercise price of NT$28.75 per share (currently adjusted to NT$22.6 per share). As of December 31, 2015, a total of 94,270,000 options had been granted under the 2015 plan. The exercise price under the 2015 plan was NT$36.50 per share.

 

81

ASE Mauritius Inc. Share Option Plan

 

As of December 31, 2015, ASE Mauritius Inc. maintained one option plan adopted in 2007. Under this plan, certain employees of ASE Mauritius Inc. and the ASE Group are granted options to purchase ordinary shares of ASE Mauritius Inc. at an exercise price of US$1.7, which exercise price was determined by taking into account a fairness opinion rendered by an independent appraiser and was reviewed by our accountants. Each option is valid for ten years from the date of the grant. As of December 31, 2015, a total of 30,000,000 options had been granted under this plan with an exercise price of US$1.7.

 

USI Enterprise Limited Share Option Plans

 

USI Enterprise Limited maintains three option plans adopted in 2007, 2010 and 2011, under which certain employees of Universal Scientific and our employees were granted options to purchase common shares of USI Enterprise Limited. Each option under these three plans is valid for ten to thirteen years from the date of the grant. As of December 31, 2015, we had 14,028,000 options outstanding with an exercise price of US$1.53 per share, 7,651,420 options outstanding with an exercise price of US$2.42 per share and 8,015,200 options outstanding with an exercise price of US$2.94 per share under these three plans respectively.

 

Universal Scientific Shanghai Option Plans

 

As of December 31, 2015, Universal Scientific Shanghai maintains one option plan adopted in 2015. Under this plan, certain employees of Universal Scientific Shanghai are granted options to purchase ordinary shares of Universal Scientific Shanghai at an exercise price of RMB15.5. Each option is valid for ten years from the date of the grant. As of December 31, 2015, a total of 26,639,500 options had been granted under this plan with an exercise price of RMB15.5.

 

BOARD PRACTICES

 

General

 

For a discussion of the term of office of the board of directors, see “—Directors and Senior Management.” No benefits are payable to members of the board or the executive officers upon termination of their relationship with us.

 

Compensation Committee

 

For a discussion of our compensation committee, see “—Directors and Senior Management—Directors.”

 

EMPLOYEES

 

The following table sets forth certain information concerning our employees as of the dates indicated.

 

    As of December 31,
    2013   2014   2015
Total     60,199       68,100       65,789  
Function                        
Direct labor     33,794       38,588       35,770  
Indirect labor (manufacturing)     14,518       16,620       16,910  
Indirect labor (administration)     5,580       5,941       5,929  
Research and development     6,307       6,951       7,180  
Location                        
Taiwan     30,552       35,382       34,877  
PRC     21,360       24,223       22,475  
Korea     2,964       2,900       2,701  
Malaysia     2,672       2,752       2,982  
Japan     693       588       502  
Singapore     1,068       1,059       986  
United States     376       383       379  
Others     514       813       887  

 

82

Eligible employees may participate in our employee share bonus plan and stock option plans and our subsidiaries’ share option plans, such as the option plans adopted by ASE Mauritius, USI Enterprise Limited, and Universal Scientific Shanghai. See “—Compensation.”

 

We have never experienced a work stoppage caused by our employees. We believe that our relationship with our employees is good.

 

SHARE OWNERSHIP

 

The following table sets forth certain information with respect to our common shares and options of ASE Inc. exercisable for our common shares held by our directors and executive officers as of March 31, 2016. Percentage of beneficial ownership is based on 7,918,272,896 common shares outstanding as of March 31, 2016.

 

Director or Executive Officer  

Number of ASE Inc. Common Shares Beneficially Held (1)

  Percentage of ASE Inc. Total Common Shares Issued and Outstanding  

Number of Options Exercisable (2)

  Exercise Price of Options (NT$)   Expiration Date of Options
                                 
Jason C.S. Chang     1,743,979,181 (3)     22.02 %     16,300,000     20.40-21.10   2017/12/19 - 2020/5/6
Richard H. P. Chang     226,144,287       2.86 %     9,050,000     20.40-21.10   2017/12/19 - 2020/5/6
Rutherford Chang     1,779,708       *       *     20.40-21.10   2017/12/19 - 2020/5/6
Tien Wu     4,953,386       *       *     20.4   5/6/2020
Joseph Tung     4,226,823       *       *     20.40-21.10   2017/12/19 - 2020/5/6
Raymond Lo     2,566,825       *       *     20.40-21.10   2017/12/19 - 2020/5/6
Tien-Szu Chen     592,054       *       *     20.40-21.10   2017/12/19 - 2020/5/6
Jeffrey Chen     1,044,802       *       *     20.40-21.10   2017/12/19 - 2020/5/6
Shen-Fu Yu     4,632       *       0     -   -
Ta-Lin Hsu     0       0       0     -   -
Mei-Yueh Ho     0       0       0     -   -
Chun-Che Lee     2,944,502       *       *     20.40-21.10   2017/12/19 - 2020/5/6
Ung Bae     0       0       *     20.40-21.10   2017/12/19 - 2020/5/6
Chih-Hsiao Chung     10,647       *       *     20.40-21.10   2017/12/19 - 2020/5/6
Chiu-Ming Cheng     387,698       *       *     20.40-21.10   2017/12/19 - 2020/5/6
Chih-An Hsu     0       0       *     20.4   5/6/2020
Yen-Chieh Tsao     0       0       0     36.5   9/10/2025
Shih-Kang Hsu     214,688       *       *     20.4   2020/5/6
Meng-Hui Lin     271,523       *       *     20.40-21.10   2017/12/19 - 2020/5/6
Kwai Mun Lee     0       0       *     20.40-21.10   2017/12/19 - 2020/5/6
Lid Jian Chiou     0       0       *     20.40-21.10   2017/12/19 - 2020/5/6
Kenneth Hsiang     155,000       *       *     20.40-21.10   2017/12/19 - 2020/5/6
Chen-Yen Wei     710,053       *       0     -   -
Feng-Ta Chen     0       0       0     -   -
Jack Hou     107,558       *       0     -   -
Ta-I Lin     30,000       *       0     -   -
Yueh-Ming Lin     0       0       0     -   -
Omar Anaya Galvan     0       0       0     -   -
                                 

 

 

83

________ ___________

(1) Including shares directly held and shares beneficially owned through spouse and minor children.

 

(2) Each option may be converted into one of our common shares. The figures referred herein include options convertible into our common shares scheduled to vest within 60 days as of the date hereof.

 

(3) Including 1,327,202,773 common shares Jason C.S. Chang beneficially owned through ASE Enterprises Limited, Aintree Limited and JC Holdings Limited and 321,454,196 common shares beneficially owned through Value Tower Limited, respectively, and 95,322,212 common shares Jason C.S. Chang directly owned. See “Item 7. Major Shareholders and Related Party Transactions—Major Shareholders.”

 

* The sum of the number of common shares held and the number of common shares issuable upon exercise of all options held is less than 1.0% of our total outstanding shares.

 

Item 7. Major Shareholders and Related Party Transactions

 

MAJOR SHAREHOLDERS

 

The following table sets forth information known to us with respect to the beneficial ownership of our common shares, as of March 31, 2016, by each shareholder known by us to beneficially own more than 5.0% of our total outstanding shares.

 

Beneficial ownership is determined in accordance with the rules and regulations of the SEC. Percentage of beneficial ownership is based on 7,918,272,896 common shares outstanding as of March 31, 2016. In addition, in computing the number of shares beneficially owned by a person and the percentage ownership of that person, we have included shares that the person has the right to acquire within 60 days, including through the exercise of any option, warrant or other right or the conversion of any other security. These shares, however, are not included in the computation of the percentage ownership of any other person.

 

    Common Shares Beneficially Owned
Name of Shareholder or Group   Number   Percentage
Jason C.S. Chang (1)     1,760,279,181       22.18 %

 ___________ _____ 

(1) Jason C.S. Chang is our Chairman and Chief Executive Officer. Jason C. S. Chang beneficially owned 1,327,202,773 common shares through ASE Enterprises Limited, Aintree Limited and JC Holdings Limited and 321,454,196 common shares through Value Tower Limited, respectively, and directly owned 95,322,212 common shares and vested options convertible into 16,300,000 common shares. As a result, Jason C.S. Chang beneficially owned 1,760,279,181 common shares, representing 22.18% of our total outstanding shares on an adjusted basis (based on 7,934,572,896 common shares which were adjusted to reflect 7,918,272,896 shares outstanding as of March 31, 2016, plus 16,300,000 common shares Jason C.S. Chang may receive upon exercise of options granted to him which are vested). ASE Enterprises Limited is a company organized under the laws of Hong Kong. All of the outstanding shares of ASE Enterprises Limited are held by Aintree Limited. Aintree Limited is a company organized under the laws of the British Virgin Islands. All of the shares of Aintree Limited are held by JC Holdings Limited. The shares of JC Holdings Limited are held through intermediary holding companies and under a revocable trust established under the laws of the Bailiwick of Guernsey for the benefit of our Chairman and Chief Executive Officer, Jason C.S. Chang, and his family. Value Tower Limited is a company organized under the laws of the British Virgin Islands. Jason C.S. Chang is the sole shareholder and director of Value Tower Limited. There were no significant changes in the percentage of ownership beneficially owned by Jason C.S. Chang in 2013, 2014 and 2015.

 

The following table sets forth information relating to our common shares held directly by our consolidated subsidiaries and our equity method investee as of March 31, 2016.

 

    Common Shares Beneficially Owned
Name of Shareholder   Number   Percentage
ASE Test (1)     88,200,472       1.11 %
ASE Test Taiwan (2)     10,978,776       0.14 %
J&R Holding Limited (3)     46,703,763       0.59 %
Hung Ching (4)     85,588,293       1.08 %

 

84

 

 

(1)

ASE Test is our wholly owned subsidiary. ASE Test’s ownership of our common shares is the result of the merger of ASE Chung Li with and into us in August 2004, and subsequent dividends upon shares received in connection with this merger. In order to comply with Singapore Companies Act, a trust was established to hold and dispose our common shares issued to ASE Test, a Singaporean Company, upon completion of the merger. The trustee appointed under such trust arrangement is currently our registered shareholder for our common shares issued to ASE Test. See “—Related Party Transactions.”

 

(2) ASE Test Taiwan is our wholly owned subsidiary. ASE Test Taiwan’s ownership of our common shares is mainly the result of the merger of ASE Material with and into us in August 2004, and subsequent dividends upon shares received in connection with this merger. In order to comply with Singapore Companies Act, a trust had been established to hold and dispose our common shares issued to ASE Test Taiwan, which had been a subsidiary of ASE Test, upon completion of the merger. In December 2014, the trust established to hold the common shares issued to ASE Test Taiwan had been terminated because ASE Test Taiwan was no longer a subsidiary owned by ASE Test and therefore no longer subject to Singapore Companies Act requirements. As a result, ASE Test Taiwan directly owned 10,978,776 of our common shares as of March 31, 2016. See “—Related Party Transactions.”

 

(3) J&R Holding Limited is our wholly owned subsidiary. J&R Holding Limited’s ownership of our common shares is the result of the merger of ASE Chung Li with and into us in August 2004, and subsequent dividends upon shares received in connection with this merger.

 

(4) Hung Ching is our equity method investee. As of March 31, 2016, we held 26.22% of the outstanding shares of Hung Ching. Hung Ching acquired our common shares in open market transactions and subsequent dividends upon the acquired shares.

 

As of March 31, 2016, none of our major shareholders had voting rights different from those of our other shareholders. We are not aware of any arrangement that may at a subsequent date result in a change of control of us. Furthermore, other than disclosed above, we are not aware of any significant changes in the percentage of ownership held by our major shareholders in 2013, 2014 and 2015.

 

As of March 31, 2016, a total of 7,918,272,896 common shares were outstanding. With certain limited exceptions, holders of common shares that are not ROC persons are required to hold their common shares through a brokerage account in the ROC. As of March 31, 2016, 628,336,485 common shares were registered in the name of a nominee of Citibank, N.A., the depositary under our ADS deposit agreement. Citibank, N.A., has advised us that, as of March 31, 2016, 125,667,006 ADSs, representing 628,335,030 common shares, were held of record by Cede & Co., and 290 ADSs, representing 1,450 common shares, were held by 9 other U.S. persons. The remaining 5 common shares held by Citibank, N.A. for the Company are a result of fractional shares distributed during stock distributions on our common shares underlying the ADSs.

 

RELATED PARTY TRANSACTIONS

 

In recent years, we have awarded cash bonuses to the employees of our subsidiaries as part of their compensation, based in part on our consolidated net income and the subsidiaries’ contribution to our consolidated income. We expect to continue this practice in the future.

 

In order to comply with Singapore law and other applicable laws and regulations, trusts organized under ROC law were established to hold and dispose of our common shares issued to ASE Test and ASE Test Taiwan in connection with the merger of ASE Chung Li and ASE Material into our company in August 2004. Under Section 76(1)(b)(ii) of Singapore’s Companies Act, Chapter 50, ASE Test, a Singapore company, may not purport to acquire, directly or indirectly, shares or units of shares in our company, ASE Test’s parent company. Pursuant to the applicable trust agreements, the trustee under each trust is (1) the registered owner of our common shares, (2) authorized to exercise all of the rights as a shareholder of our common shares, (3) authorized to sell our common shares, subject to market conditions, when such common shares become available for resale under ROC law and in accordance with volume limitations under ROC law, at its sole discretion; provided such common shares are sold (i) in compliance with ROC laws and regulations, (ii) in an orderly manner in order to minimize the impact on the trading price of our common shares, and (iii) in a manner consistent with its fiduciary duties owed to ASE Test and (4) able to transfer and deliver to ASE Test or ASE Test Taiwan the proceeds from the sale of our common shares and any cash dividends distributed, as the case may be. In February 2010, to complete the tender offer to acquire Universal Scientific, ASE Test transferred 141,808,499 shares to the shareholders of Universal Scientific. Neither ASE Test nor ASE Test Taiwan have any rights with respect to our common shares held in trust pursuant to the applicable trust agreements other than the right to receive the proceeds from the sale of such common shares and cash dividends declared while the shares remain in trust. In December 2014, the trust established to hold the common shares issued to ASE Test Taiwan had been terminated because ASE Test Taiwan was no longer a subsidiary owned by ASE Test and therefore no longer subject to Singapore Companies Act requirements. As a result, ASE Test Taiwan directly owned 10,978,776 of our common shares as of March 31, 2016 and the trust established to hold the common shares issued to ASE Test held 88,200,472 of our common shares.

 

85

We have historically provided promissory notes as guarantees to some of our subsidiaries. As of December 31, 2015, we endorsed and guaranteed the bonds issued by our subsidiaries, Anstock Limited, in the amount of RMB521.1 million (US$80.4 million) and Anstock II Limited, in the amount of US$312.8 million, respectively. Other than such guarantee, we have no other contingent obligations.

 

In December 2013, we acquired the K21 factory-administration building in Nantze Export Processing Zone, Taiwan, from Hung Ching for a consideration of NT$1,473.9 million.

 

In July 2014, we acquired factory-administration building in Chung Li, Taiwan, from Hung Ching for a consideration of NT$4,540.1 million.

 

In 2014, a series of construction projects for which we contracted with Fu Hwa Construction Co., Ltd. for the construction of buildings with green design concept and other projects in Nantze Export Processing Zone, Taiwan, have been completed with a total consideration of NT$350.0 million.

 

In August 2014, we made the donation of NT$15.0 million to Social Affairs Bureau of Kaohsiung City Government through ASE Cultural and Educational Foundation. In addition, in order to demonstrate our commitment to environmental protection, in December 2013, our board of directors approved contributions to environmental protection efforts in Taiwan in a total amount of not less than NT$3,000.0 million, to be made in the next 30 years. For the years ended December 31, 2014 and 2015, we have made contributions in the amount of NT$100.0 million (US$3.0 million) each, respectively, through ASE Cultural and Educational Foundation to fund various environmental projects and our board of directors have resolved in a resolution in January 2016 to contribute NT$100.0 million (US$3.0 million) through ASE Cultural and Educational Foundation in environmental projects in 2016.

 

In June 2015, we acquired the K22 and K23 factory-administration building in Nantze Export Processing Zone, Taiwan, from Hung Ching for a consideration of NT$2,466.0 million (US$75.2 million).

 

In 2015, we have capitalized NT$504.6 million (US$15.4 million) for the construction of foreign worker dormitory for which we contracted with Fu Hwa Construction Co., Ltd. in Kaohsiung, Taiwan.

 

INTERESTS OF EXPERTS AND COUNSEL

 

Not applicable.

 

Item 8. Financial Information

 

CONSOLIDATED STATEMENTS AND OTHER FINANCIAL INFORMATION

 

Consolidated financial statements are set forth under “Item 18. Financial Statements.”

 

Export Sales

 

We categorize our revenues geographically based on the country in which the customer is headquartered. Revenues from our export sales were NT$188,585.3 million, NT$219,843.7 and NT$250,671.4 million (US$7,644.8 million) in 2013, 2014 and 2015, respectively, which contributed 85.8%, 85.7% and 88.5% of our total sales volume for those periods, respectively. See “Item 4. Information on the Company—Business Overview—Sales and Marketing” for information on our export sales.

 

Legal Proceedings

 

K7 Plant Wastewater Discharge

 

In December 2013, the Kaohsiung City Environmental Protection Bureau ordered us to suspend the operations at our K7 Plant’s wafer-level process where nickel was used for alleged wastewater discharge violations and imposed a NT$110.1 million fine against us. The NT$110.1 million fine was later reduced to NT$109.4 million as ordered by the Kaohsiung City Environmental Protection Bureau. In December 2014, the Kaohsiung City Environmental Protection Bureau lifted the suspension order and approved the full resumption of operations of our K7 Plant after ordering a series of examinations, hearings and trial runs. In September 2015, the fine was reduced to NT$102.0 million (US$3.1 million) by the Kaohsiung City Environmental Protection Bureau and we received a refund of NT$7.3 million (US$0.2 million) in October 2015.

 

86

With respect to the NT$102.0 million (US$3.1 million) administrative penalty imposed on us by the Kaohsiung City Environmental Protection Bureau, we appealed to the Kaohsiung High Administrative Court in August 2014 seeking to (i) revoke Kaohsiung City Government’s decision, (ii) lift the administrative penalty imposed on us and (iii) demand a refund of the administrative penalty. On March 22, 2016, the Kaohsiung High Administrative Court revoked Kaohsiung City Government’s decision and lifted the administrative penalty. Our demand for a refund of the fine was dismissed. We appealed to the Supreme Administrative Court on April 14, 2016 against the Kaohsiung High Administrative Court’s unfavorable ruling in dismissing a refund. The outcome of the proceeding cannot be predicted with certainty.

 

In connection with the same alleged violations at our K7 plant, in October 2014, the Kaohsiung District Court ruled that we were in violation of the ROC Waste Disposal Act and imposed on us a criminal penalty of NT$3.0 million. We appealed the case to the Taiwan High Court Kaohsiung District Branch in November 2014. In September 2015, the Taiwan High Court Kaohsiung District Branch overturned the decision made by Kaohsiung District Court and found the Company not guilty and repealed the criminal penalty imposed on the Company. The verdict was final and not appealable.

 

Any penalties, fines, damages or settlements made in connection with these criminal, civil, and/or administrative investigations and/or lawsuits may have a material adverse effect on our business, results of operations and future prospects. See “Item 3. Key Information—Risk Factors—Risks Relating to Our Business—Any environmental claims or failure to comply with any present or future environmental regulations, as well as any fire or other industrial accident, may require us to spend additional funds and may materially and adversely affect our financial condition and results of operations,” “Item 4. Information on the Company—Business Overview—Environmental Matters” and “Item 4. Information on the Company—Property, Plants and Equipment.”

 

SPIL Litigation Against ASE

 

On October 15, 2015, in connection with the Initial SPIL Tender Offer, SPIL filed a lawsuit in the Kaohsiung District Court against ASE requesting that the court invalidate the Initial SPIL Tender Offer and confirm that ASE does not have the right to be registered as a shareholder of SPIL. The lawsuit alleged that the Initial SPIL Tender Offer violate certain provisions of the ROC Securities and Exchange Act and certain provisions of the ROC Fair Trade Act and because of these violations the Initial SPIL Tender Offer should be voided. Following a series of pleadings and arguments on the amount of verdict fee that SPIL has to post before the case could be heard, the Kaohsiung District Court ordered SPIL to post a verdict fee in the amount of NT$219.2 million (US$6.7 million) and scheduled a hearing on April 29, 2016. SPIL appealed the Kaohsiung District Court’s decision on the verdict fee to the Kaohsiung High Court, and, following the Kaohsiung High Court’s decision to sustain the Kaohsiung District Court’s decision on the amount of the verdict fee, SPIL appealed to the Supreme Court of Taiwan on January 18, 2016. As of the date of this annual report, the Supreme Court has not ruled on whether to uphold or dismiss the Kaohsiung High Court’s decision on the verdict fee.

 

The outcome of these proceedings is uncertain. If a dismissal is not granted or a settlement is not reached, such a lawsuit could result in substantial costs to ASE and divert management’s attention and resources which may cause a material adverse effect on our results of operations, financial condition and business. We are also unable to quantify the harm to our reputation should any adverse findings be made against us. If our interest in SPIL from the Initial Tender Offer is voided by ROC courts, we may not realize the anticipated synergies, cost savings and growth opportunities and the anticipated synergies and cost-saving benefits that would otherwise have resulted from our acquisition of 779,000,000 common shares of SPIL.

 

Dividends and Dividend Policy

 

We have historically paid dividends on our common shares with respect to the results of the preceding year following approval by our shareholders at the annual general meeting of shareholders. We have paid annual dividends on our common shares since 1989, except in 2002 and 2006 when we did not pay any dividend due to the losses we incurred in the 2001 and 2005 fiscal years, respectively. On April 1, 2016, our board of directors adopted resolutions to pay cash dividends of NT$1.6 per share based on 7,797,986,896 shares, which equal to the number of issued shares shown in the shareholders’ roster as of March 23, 2016 minus the number of shares repurchased by us as treasury stocks. This proposal is subject to shareholders’ approval at the annual general shareholders meeting in June 2016 and the actual cash dividends per share will be adjusted by any fluctuations in the number of our shares due to, for example, the exercise of share options.

 

87

The following table sets forth the stock dividends paid during each of the years indicated and related information.

 

    Cash Dividends Per Common Share  

Stock Dividends Per Common Share (1)

  Total Common Shares Issued as Stock Dividends  

Outstanding Common
Shares on
Record Date (2)

  Percentage of Outstanding Common Shares Represented by Stock Dividends
    NT$   NT$            
                     
2008     1.71       0.29       158,766,146       5,484,848,118       2.9 %
2009     0.50                   5,474,320,814        
2010     0.36       1.00       549,497,078       5,500,216,994       10.0 %
2011     0.65       1.15       695,735,660       6,055,261,112       11.5 %
2012     0.65       1.40       931,599,554       6,659,893,672       14.0 %
2013     1.05                   7,611,579,786        
2014     1.29 (3)                 7,847,817,646        
2015     2.00                   7,900,130,996        

_____ ________________

(1) Stock dividends were paid out from retained earnings and capital surplus. Holders of common shares receive as a stock dividend the number of common shares equal to the NT dollar value per common share of the dividend declared multiplied by the number of common shares owned and divided by the par value of NT$10 per share. Fractional shares are not issued but are paid in cash.

 

(2) Aggregate number of common shares outstanding on the record date applicable to the dividend payment. Includes common shares issued in the previous year under our employee bonus plan.

 

(3) On June 26, 2014, our shareholders approved a cash dividend of NT$1.30 per share for 2013 earnings. On July 29, 2014, our board of directors resolved to adjust the cash dividend ratio to NT$1.29411842 because the number of outstanding common shares had changed as a result of the exercise of share options.

 

In order to meet the needs of our present and future capital expenditures, we anticipate paying both stock and cash dividends in the future. The form, frequency and amount of future cash or stock dividends on our common shares will depend upon our net income, cash flow, financial condition, shareholders’ requirement for cash inflow and other factors. According to our Articles of Incorporation, we have a general policy that cash dividend distribution should not be lower than 30% of the total dividend amount and the remainder be distributed as stock dividends. See “Item 10. Additional information––Articles of Incorporation––Dividends and Distributions.”

 

In general, we are not permitted to distribute dividends or make other distributions to shareholders for any year where we did not record net income or retained earnings (excluding reserves). The ROC Company Law also requires that 10% of annual net income (less outstanding taxes and prior years’ losses, if any) be set aside as a legal reserve until the accumulated legal reserve equals our paid-in capital. In addition, our Articles of Incorporation require that before a dividend is paid pro rata out of our annual net income:

 

· up to 1% of our annual net income (less prior years’ losses and legal and special reserves and the additions or deductions of the portion of retained earnings that belong to equity investment gains or losses that have been realized through other comprehensive income or losses measured at fair value, if any) should be paid to our directors as compensation; and

 

· between 7% and 11% of the annual net income (less prior years’ losses and legal and special reserves and the additions or deductions of the portion of retained earnings that belong to equity investment gains or losses that have been realized through other comprehensive income or losses measured at fair value, if any) should be paid to our employees as bonuses; the 7% portion is to be distributed to all employees in accordance with our employee bonus distribution rules, while any portion exceeding 7% is to be distributed in accordance with rules established by our board of directors to individual employees who have been recognized as having made special contributions to our company. Such employees include those of our subsidiaries.

 

88

In January 2016, our board of directors proposed to amend our Articles of Incorporation to distribute employees’ compensation and remuneration to directors at the rates in 5.25%-8.25% and no higher than 0.75%, respectively, of net profit before income tax, employees’ compensation, and remuneration to directors. The 5.25% portion is to be distributed to all employees in accordance with our employee compensation distribution rules, while any portion exceeding 5.25% is to be distributed in accordance with rules established by our board of directors to individual employees who have been recognized as having made special contributions to our company. Such employees include those of our subsidiaries. This proposal is awaiting shareholders’ approval in their annual general meeting in June 2016.

 

Holders of ADSs will be entitled to receive dividends, subject to the terms of the deposit agreement, to the same extent as the holders of our common shares. Cash dividends will be paid to the depositary in NT dollars and, except as otherwise provided in the deposit agreement, will be converted by the depositary into U.S. dollars and paid to holders of ADSs according to the terms of the deposit agreement. Stock dividends will be distributed to the depositary and, except as otherwise provided in the deposit agreement, will be distributed by the depositary, in the form of additional ADSs, to holders of ADSs according to the terms of the deposit agreement.

 

Holders of outstanding common shares on a dividend record date will be entitled to the full dividend declared without regard to any prior or subsequent transfer of common shares. Holders of outstanding ADSs are entitled to receive dividends, subject to the terms of the deposit agreement, to the same extent as the holders of outstanding common shares.

 

For information relating to ROC withholding taxes payable on dividends, see “Item 10. Additional Information—Taxation—ROC Taxation—Dividends.”

 

SIGNIFICANT CHANGES

 

Other than as disclosed elsewhere in this annual report, we have not experienced any significant changes since the date of the annual financial statements.

 

Item 9. The Offer and Listing

 

OFFER AND LISTING DETAILS

 

Our common shares were first issued in March 1984 and have been listed on the Taiwan Stock Exchange since July 1989. The Taiwan Stock Exchange is an auction market where the securities traded are priced according to supply and demand through announced bid and ask prices. As of March 31, 2016, there were an aggregate of 7,918,272,896 of our common shares outstanding. The following table sets forth, for the periods indicated, the high and low closing prices and the average daily volume of trading activity on the Taiwan Stock Exchange for our common shares and the high and low of the daily closing values of the Taiwan Stock Exchange Index. The closing price for our common shares on the Taiwan Stock Exchange on April 28, 2016 was NT$32.20 per share.

 

    Closing Price per Share  

Adjusted Closing
Price per Share (1)

  Average Daily Trading Volume   Taiwan Stock
Exchange Index
    High   Low   High   Low   (in thousands of shares)   High   Low
      NT$       NT$       NT$       NT$                          
2011     37.60       24.00       24.16       16.14       32,247       9,145.4       6,633.3  
2012     31.10       20.15       22.37       14.39       24,667       8,144.0       6,894.7  
2013     30.65       23.60       27.36       19.26       24,598       8,623.4       7,616.6  
2014     41.00       26.80       37.71       23.51       25,609       9,569.2       8,264.5  
First Quarter     33.80       26.80       30.51       23.51       28,492       8,849.3       8,264.5  
Second Quarter     39.00       32.90       35.71       29.61       22,238       9,393.1       8,774.1  
Third Quarter     41.00       35.40       37.71       32.16       25,959       9,569.2       8,960.8  
Fourth Quarter     39.10       34.40       37.10       32.40       25,991       9,307.3       8,512.9  
2015     47.75       30.00       45.75       30.00       28,467       9,973.1       7,410.3  
First Quarter     47.75       36.65       45.75       34.65       31,837       9,758.1       9,048.3  
Second Quarter     46.65       39.70       44.65       37.70       29,672       9,973.1       9,189.8  
Third Quarter     42.10       30.00       40.10       30.00       33,371       9,379.2       7,410.3  
Fourth Quarter     39.00       33.40       39.00       33.40       19,731       8,857.0       8,040.2  
October     39.00       34.50       39.00       34.50       23,239       8,745.4       8,295.9  
November     38.40       34.35       38.40       34.35       16,591       8,857.0       8,295.4  
December     38.50       33.40       38.50       33.40       19,394       8,463.3       8,040.2  
2016                                                        
First Quarter     38.30       33.75       38.30       33.75       17,321       8,812.7       7,664.0  
January     36.60       33.75       36.60       33.75       16,734       8,145.2       7,664.0  
February     37.95       34.20       37.95       34.20       20,129       8,411.2       8,063.0  
March     38.30       35.85       38.30       35.85       16,271       8,812.7       8,485.7  
Second Quarter                                                        
April (through April 28, 2016)    

36.35

     

32.20

     

36.35

     

32.20

     

21,189

     

8,700.4

     

8,473.9

 

_______ ____________

(1) As adjusted retroactively by the Taiwan Stock Exchange to give effect to stock dividends and cash dividends paid in the periods indicated. See “Item 8. Financial Information—Consolidated Statements and Other Financial Information—Dividends and Dividend Policy.”

 

89

The performance of the Taiwan Stock Exchange has in recent years been characterized by extreme price volatility. There are currently limits on the range of daily price movements on the Taiwan Stock Exchange. In the case of equity securities traded on the Taiwan Stock Exchange, such as our common shares, fluctuations in the price of a particular security may not exceed a 10.0% change either above or below the previous day’s closing price of such security.

 

Our ADSs have been listed on the New York Stock Exchange under the symbol “ASX” since September 26, 2000. The outstanding ADSs are identified by the CUSIP number 00756M404. As of March 31, 2016, a total of 125,667,296 ADSs were outstanding. The following table sets forth, for the periods indicated, the high and low closing prices and the average daily volume of trading activity on the New York Stock Exchange for our ADSs and the highest and lowest of the daily closing values of the New York Stock Exchange Index. The closing price for our ADSs on the New York Stock Exchange on April 28, 2016 was US$4.96 per ADS.

 

    Closing Price per ADS  

Adjusted Closing
Price per ADS (1)

  Average Daily Trading Volume   New York Stock
Exchange Index
    High   Low   High   Low   (in thousands of ADSs)   High   Low
    US$   US$   US$   US$            
2011     6.55       4.04       5.21       3.28       1,346       8,671.4       6,571.5  
2012     5.27       3.54       4.27       2.94       1,065       8,516.4       7,285.5  
2013     5.35       3.91       4.85       3.24       746       10,400.3       8,604.4  
2014     6.87       4.45       6.22       4.03       752       11,104.7       9,741.6  
First Quarter     5.55       4.45       5.03       4.03       731       10,527.8       9,741.6  
Second Quarter     6.65       5.43       6.02       4.92       709       11,018.1       10,280.9  
Third Quarter     6.87       5.87       6.22       5.43       728       11,104.7       10,583.8  
Fourth Quarter     6.39       5.80       6.00       5.45       839       11,047.9       10,109.7  
2015     7.89       4.69       7.41       4.69       1,405       11,239.7       9,601.4  
First Quarter     7.89       5.96       7.41       5.60       1,485       11,122.1       10,514.6  
Second Quarter     7.51       6.39       7.05       6.00       1,412       11,239.7       10,790.3  
Third Quarter     6.67       4.69       6.27       4.69       1,700       11,024.9       9,601.4  
Fourth Quarter     6.12       5.18       6.12       5.18       1,028       10,609.9       9,821.0  
October     6.12       5.24       6.12       5.24       1,378       10,538.2       9,821.0  
November     5.90       5.39       5.90       5.39       724       10,609.9       10,155.1  
December     5.83       5.18       5.83       5.18       953       10,519.6       9,967.6  
2016                                                        
First Quarter     5.87       4.95       5.87       4.95       1,015       10,237.0       9,029.9  
January     5.53       5.02       5.53       5.02       902       10,028.1       9,156.8  
February     5.64       4.95       5.64       4.95       915       9,625.3       9,029.9  
March     5.87       5.60       5.87       5.60       1,204       10,237.0       9,771.0  
Second Quarter                                                        
April (through April 28, 2016)    

5.74

     

4.96

     

5.74

     

4.96

     

1,456

     

10,571.8

     

10,045.2

 

_____ _______________

(1) As adjusted retroactively to give effect to stock dividends and cash dividends paid in the periods indicated.

 

90

PLAN OF DISTRIBUTION

 

Not applicable.

 

MARKETS

 

The principal trading market for our common shares is the Taiwan Stock Exchange and the principal trading market for ADSs representing our common shares is the New York Stock Exchange.

 

SELLING SHAREHOLDERS

 

Not applicable.

 

DILUTION

 

Not applicable.

 

EXPENSES OF THE ISSUE

 

Not applicable.

 

Item 10. Additional Information

 

SHARE CAPITAL

 

Not applicable.

 

ARTICLES OF INCORPORATION

 

General

 

We are a company limited by shares organized under the laws of the ROC. Our organizational document is our Articles of Incorporation. We have no by-laws.

 

Our Articles of Incorporation provide, in Article 2, that we may engage in the following types of business:

 

· the manufacture, assembly, processing, testing and export of various types of integrated circuitry;

 

· the research, development, design and manufacture, assembly, processing, testing and export of various computers, electronics, communications, information products and their peripheral products;

 

· general import and export trading (excluding businesses that require trading permits);

 

· the manufacture of electronic parts and components;

 

· the manufacture of mechanical and electronic devices and materials (including integrated circuit leadframes, BGA substrates and flip-chip substrates);

 

91

· wholesale and retail sales of electronic materials;

 

· technical support and consulting service for integrated circuit leadframes, BGA substrates and flip-chip substrates;

 

· leasing; and

 

· except any business requiring a special permit, any business not prohibited or restricted by law or regulation.

 

We were incorporated on March 23, 1984 as a company limited by shares under the ROC Company Law. Our authorized share capital registered with the Kaohsiung Export Processing Zones Administration was NT$95 billion, divided into 9,500 million common shares, 7,918,272,896 of which were outstanding as of March 31, 2016. Our authorized share capital under our Articles of Incorporation is NT$100 billion, divided into 10 billion common shares. We do not have any equity in the form of preference shares or otherwise outstanding as of the date of this annual report.

 

Subject to limited exceptions, with the approval of our board of directors and the FSC, we may grant stock options to our employees, provided that NT$8,000 million of our authorized capital (800 million common shares) is reserved for employee stock options. The total number of shares to be issued under all option plans, together with all restricted shares issued to employees, shall not exceed 15% of our outstanding common shares. Unless otherwise approved by the shareholders’ meeting, the exercise price of an option shall not be less than the closing price of our common shares on the Taiwan Stock Exchange on the grant date of the option. As of March 31, 2016, we had granted 480,075,500 options pursuant to employee stock option plans established on November 22, 2007, April 20, 2010 and April 17, 2015 to our full-time employees, including our domestic and foreign subsidiaries. See “Item 6. Directors, Senior Management and Employees—Compensation—ASE Inc. Employee Bonus and Stock Option Plans.”

 

Directors

 

Our Articles of Incorporation provide that, we are to have 11 to 15 directors with tenures of three years who are elected at a shareholders’ meeting. In addition, three of our directors will be required to be independent directors. Our audit committee replaced the function of supervisors in accordance with the ROC Securities and Exchange Act to exercise the powers and duties of supervisors starting from June 2015.

 

There is no minimum amount of shares necessary to stand for election to a directorship. Many of our directors are representatives appointed by corporate shareholders which appoint individual representatives. Re-elections are allowed. The board of directors has certain powers and duties, including devising operations strategy, proposing to distribute dividends or make up losses, proposing to increase or decrease capital, reviewing material internal rules and contracts, hiring and discharging the general manager, establishing and dissolving branch offices, reviewing budgets and financial statements and other duties and powers granted by or in accordance with the ROC Company Law, our Articles of Incorporation or shareholders resolutions.

 

The board of directors is constituted by the directors, who elect a chairman from among the directors to preside over the meeting of the board. Meetings of the board may be held in the ROC or by videoconference. A director may appoint another director to attend a meeting and vote by proxy, but a director may accept only one proxy.

 

Dividends and Distributions

 

In general, we are not permitted to distribute dividends or make other distributions to shareholders in any given year in which we did not record net income or retained earnings (excluding reserves). The ROC Company Law also requires that 10% of annual net income (less prior years’ losses, if any, and applicable income taxes) be set aside as a legal reserve until the accumulated legal reserve equals our paid-in capital. In addition, our Articles of Incorporation require that before a dividend is paid out of our annual net income:

 

· up to 1% of our annual net income (less prior years’ losses and legal and special reserves and the additions or deductions of the portion of retained earnings that belong to equity investment gains or losses that have been realized through other comprehensive income or losses measured at fair value, if any) should be paid to our directors as compensation; and

 

92

· between 7% and 11% of the annual net income (less prior years’ losses and legal and special reserves and the additions or deductions of the portion of retained earnings that belong to equity investment gains or losses that have been realized through other comprehensive income or losses measured at fair value, if any) should be paid to our employees as bonuses. The 7% portion is to be distributed to all employees in accordance with our employee bonus distribution rules, while any portion exceeding 7% is to be distributed in accordance with rules established by our board of directors to individual employees who have been recognized as having made special contributions to our company. Such employees include those of our subsidiaries.

 

In January 2016, our board of directors proposed to amend our Articles of Incorporation to distribute employees’ compensation and remuneration to directors at the rates in 5.25%-8.25% and no higher than 0.75%, respectively, of net profit before income tax, employees’ compensation, and remuneration to directors. The 5.25% portion is to be distributed to all employees in accordance with our employee compensation distribution rules, while any portion exceeding 5.25% is to be distributed in accordance with rules established by our board of directors to individual employees who have been recognized as having made special contributions to our company. Such employees include those of our subsidiaries. This proposal is subject to the shareholders’ approval at the annual general meeting in June 2016.

 

At the annual general meeting of shareholders, our board of directors submits to the shareholders for their approval any proposal for the distribution of dividends or the making of any other distribution to shareholders from our net income for the preceding fiscal year. All common shares outstanding and fully paid as of the relevant record date are entitled to share equally in any dividend or other distribution so approved. Dividends may be distributed in cash, in the form of common shares or a combination of the two, as determined by the shareholders at the meeting. According to our Articles of Incorporation, we have a general policy that cash dividend distribution should not be lower than 30% of the total dividend amount and the remainder be distributed as stock dividends. See “Item 8. Financial Information—Consolidated Statements and Other Financial Information—Dividends and Dividend Policy.”

 

We are also permitted to make distributions to our shareholders in cash or in the form of common shares from reserves if we have no accumulated loss. However, the distribution payable out of our legal reserve can only come from the amount exceeding 25% of the total paid-in capital.

 

For information on the dividends we paid in recent years, see “Item 8. Financial Information—Consolidated Statements and Other Financial Information—Dividends and Dividend Policy.” For information as to ROC taxes on dividends and distributions, see “—Taxation—ROC Taxation—Dividends.”

 

Changes in Share Capital

 

Under ROC Company Law, any change in the authorized share capital of a company limited by shares requires an amendment to its Articles of Incorporation, which in turn requires approval at the shareholders’ meeting. In the case of a public company such as ourselves, we must also obtain the approval of, or submit a report to, the FSC and the Kaohsiung Export Processing Zone Administration. Authorized but unissued common shares may be issued, subject to applicable ROC law, upon terms as our board of directors may determine. Our authorized share capital registered with the Kaohsiung Export Processing Zones Administration was NT$95 billion, divided into 9,500 million common shares with a face value of NT$10.0 per share as of March 31, 2016. Our authorized share capital under our Articles of Incorporation is NT$100 billion, divided into 10 billion common shares. There were 500 million common shares included in our authorized shares that are currently not registered with the Kaohsiung Export Processing Zones Administration. We will complete the registration with the Kaohsiung Export Processing Zones Administration if and when our total issued share capital equals or exceeds NT$95 billion.

 

Preemptive Rights

 

Under the ROC Company Law, when an ROC company issues new shares for cash, existing shareholders who are listed on the shareholders’ register as of the record date have preemptive rights to subscribe for the new issue in proportion to their existing shareholdings, while a company’s employees, whether or not they are shareholders of the company, have rights to subscribe for 10% to 15% of the new issue. Any new shares that remain unsubscribed at the expiration of the subscription period may be freely offered, subject to compliance with applicable ROC law.

 

93

In addition, in accordance with the ROC Securities and Exchange Act, a public company that intends to offer new shares for cash must offer to the public at least 10% of the shares to be sold, except under certain circumstances or when exempted by the FSC. This percentage can be increased by a resolution passed at a shareholders’ meeting, which would diminish the number of new shares subject to the preemptive rights of existing shareholders.

 

These preemptive rights provisions do not apply to offerings of new shares through a private placement approved at a shareholders’ meeting.

 

Meetings of Shareholders

 

We are required to hold an annual general meeting of our shareholders within six months following the end of each fiscal year. These meetings are generally held in Kaohsiung, Taiwan. Any shareholder who holds 1% or more of our issued and outstanding shares may submit one written proposal for discussion at our annual general meeting. Extraordinary shareholders’ meetings may be convened by resolution of the board of directors or by the board of directors upon the written request of any shareholder or shareholders who have held 3% or more of the outstanding common shares for a period of one year or longer. Shareholders’ meetings may also be convened by member(s) of the audit committee. Notice in writing of meetings of shareholders, stating the place, time and purpose, must be dispatched to each shareholder at least 30 days, in the case of annual general meetings, and 15 days, in the case of extraordinary meetings, before the date set for each meeting. A majority of the holders of all issued and outstanding common shares present at a shareholders’ meeting constitutes a quorum for meetings of shareholders.

 

Voting Rights

 

Under the ROC Company Law, except under limited circumstances, shareholders have one vote for each common share held. Under the ROC Company Law, our directors are elected at a shareholders’ meeting through cumulative voting.

 

In general, a resolution can be adopted by the holders of at least a majority of our common shares represented at a shareholders’ meeting at which the holders of a majority of all issued and outstanding common shares are present. Under ROC Company Law, the approval by at least a majority of our common shares represented at a shareholders’ meeting in which a quorum of at least two-thirds of all issued and outstanding common shares are represented is required for major corporate actions, including:

 

· amendment to the Articles of Incorporation, including increase of authorized share capital and any changes of the rights of different classes of shares;

 

· execution, amendment or termination of any contract through which the company leases its entire business to others, or the company appoints others to operate its business or the company operates its business with others on a continuous basis;

 

· transfer of entire business or assets or a substantial part of its business or assets;

 

· acquisition of the entire business or assets of any other company, which would have a significant impact on the company’s operations;

 

· distribution of any stock dividend;

 

· dissolution, merger or spin-off of the company;

 

· issuance of restricted shares to employees; and

 

· removal of the directors.

 

However, in the case of a listed company such as us, the resolution may be adopted by the holders of at least two-thirds of our issued and outstanding common shares represented at a shareholders’ meeting at which the holders of at least a majority of all issued and outstanding common shares are present.

 

A shareholder may be represented at an annual general or extraordinary meeting by proxy if a valid proxy form is delivered to us five days before the commencement of the annual general or extraordinary shareholders’ meeting. Shareholders may exercise their voting rights by way of a written ballot or by way of electronic transmission if the voting decision is delivered to us two days before the commencement of the annual general or extraordinary shareholders’ meeting.

 

94

Holders of ADSs do not have the right to exercise voting rights with respect to the underlying common shares, except as described in the deposit agreement.

 

Other Rights of Shareholders

 

Under the ROC Company Law, dissenting shareholders are entitled to appraisal rights in certain major corporate actions such as a proposed amalgamation by the company. If agreement with the company cannot be reached, dissenting shareholders may seek a court order for the company to redeem all of their shares. Shareholders may exercise their appraisal rights by serving written notice on the company prior to or at the related shareholders’ meeting and/or by raising and registering an objection at the shareholders’ meeting. In addition to appraisal rights, shareholders have the right to sue for the annulment of any resolution adopted at a shareholders’ meeting where the procedures were legally defective within 30 days after the date of the shareholders’ meeting. One or more shareholders who have held 3% or more of the issued and outstanding shares of a company for a period of one year or longer may require an independent director to bring a derivative action on behalf of the company against a director as a result of the director’s unlawful actions or failure to act.

 

Rights of Holders of Deposited Securities

 

Except as described below, holders of ADSs generally have no right under the deposit agreement to instruct the depositary to exercise the voting rights for our common shares represented by the ADSs. Instead, by accepting ADSs or any beneficial interest in ADSs, holders of ADSs are deemed to have authorized and directed the depositary to appoint our chairman or his designee to represent them at our shareholders’ meetings and to vote our common shares deposited with the custodian according to the terms of the deposit agreement.

 

The depositary will mail to holders of ADSs any notice of shareholders’ meeting received from us together with information explaining how to instruct the depositary to exercise the voting rights of the securities represented by ADSs.

 

If we fail to timely provide the depositary with an English language translation of our notice of meeting or other materials related to any meeting of owners of common shares, the depositary will endeavor to cause all the deposited securities represented by ADSs to be present at the applicable meeting, insofar as practicable and permitted under applicable law, but will not cause those securities to be voted.

 

If the depositary timely receives voting instructions from owners of at least 51.0% of the outstanding ADSs to vote in the same direction regarding one or more resolutions to be proposed at the meeting, including election of directors, the depositary will notify our chairman or his designee to attend the meeting and vote all the securities represented by the holders’ ADSs in accordance with the direction received from owners of at least 51.0% of the outstanding ADSs.

 

If we have timely provided the depositary with the materials described in the deposit agreement and the depositary has not timely received instructions from holders of at least 51.0% of the outstanding ADSs to vote in the same direction regarding any resolution to be considered at the meeting, then, holders of ADSs will be deemed to have authorized and directed the depositary bank to give a discretionary proxy to our chairman or his designee to attend and vote at the meeting our common shares represented by the ADSs in any manner, our chairman or his designee may wish, which may not be in the interests of holders.

 

The ability of the depositary to carry out voting instructions may be limited by practical and legal limitations and the terms of the securities on deposit. We cannot assure ADS holders that they will receive voting materials in time to enable them to return voting instructions to the depositary in a timely manner.

 

While shareholders who own 1% or more of our outstanding shares are entitled to submit one proposal to be considered at our annual general meetings, only holders representing at least 51% of our ADSs outstanding at the relevant record date are entitled to submit one proposal to be considered at our annual general meetings. Hence, only one proposal may be submitted on behalf of all ADS holders.

 

95

Register of Shareholders and Record Dates

 

Our share registrar, President Securities Corp., maintains our register of shareholders at its offices in Taipei, Taiwan. Under the ROC Company Law and our Articles of Incorporation, we may, by giving advance public notice, set a record date and close the register of shareholders for a specified period in order for us to determine the shareholders or pledgees that are entitled to rights pertaining to our common share. The specified period required is as follows:

 

· annual general meeting—60 days;

 

· extraordinary shareholders’ meeting—30 days; and

 

· relevant record date for distribution of dividends, bonuses or other interests—5 days.

 

Annual Financial Statements

 

At least ten days before the annual general meeting, our annual financial statements, which are prepared in conformity with Taiwan IFRS, must be available at our principal executive office in Kaohsiung, Taiwan for inspection by the shareholders.

 

Transfer of Common Shares

 

The transfer of common shares in registered form is effected by endorsement and delivery of the related share certificates but, in order to assert shareholders’ rights against us, the transferee must have his name and address registered on our register of shareholders. Shareholders are required to file their respective specimen seals, also known as chops, with us. Chops are official stamps widely used in Taiwan by individuals and other entities to authenticate the execution of official and commercial documents. The settlement of trading in our common shares is normally carried out on the book-entry system maintained by the Taiwan Depository & Clearing Corporation.

 

Acquisition of Common Shares by ASE Inc.

 

Under the ROC Securities and Exchange Act, we may purchase our own common shares for treasury stock under limited circumstances, including:

 

· to transfer shares to our employees;

 

· to deliver shares upon the conversion or exercise of bonds with warrants, preferred shares with warrants, convertible bonds, convertible preferred shares or warrants issued by us; and

 

· to maintain our credit and our shareholders’ equity, provided that the shares so purchased shall be canceled.

 

We may purchase our common shares on the Taiwan Stock Exchange or by means of a public tender offer. These transactions require the approval of a majority of our board of directors at a meeting in which at least two-thirds of the directors are in attendance. The total amount of common shares purchased for treasury stock may not exceed 10.0% of the total issued shares. In addition, the total cost of the purchased shares shall not exceed the aggregate amount of our retained earnings, any premium from share issuances and the realized portion of our capital reserve.

 

We may not pledge or hypothecate any of our shares purchased by us. In addition, we may not exercise any shareholders’ right attaching to such shares. In the event that we purchase our shares on the Taiwan Stock Exchange, our affiliates, directors, managers, and their respective spouses and minor children and/or nominees are prohibited from selling any of our shares during the period in which we are purchasing our shares.

 

Pursuant to the ROC Company Law, an entity in which our company directly or indirectly owns more than 50.0% of the voting shares or paid-in capital, which is referred to as a controlled entity, may not purchase our shares. Also, if our company and a controlled entity jointly own, directly or indirectly, more than 50.0% of the voting shares or paid-in capital of another entity, which is referred to as a third entity, the third entity may not purchase shares in either our company or a controlled entity.

 

96

Liquidation Rights

 

In the event of our liquidation, the assets remaining after payment of all debts, liquidation expenses and taxes will be distributed pro rata to the shareholders in accordance with the relevant provisions of the ROC Company Law.

 

Transfer Restrictions

 

Substantial Shareholders

 

The ROC Securities and Exchange Act currently requires:

 

· each director, manager, or substantial shareholder (that is, a shareholder who holds more than 10.0% shares of a company), and their respective spouses, minor children or nominees, to report any change in that person’s shareholding to the issuer of the shares and the FSC; and

 

· each director, manager, or substantial shareholder, and their respective spouses, minor children or nominees, after acquiring the status of director, manager, or substantial shareholder for a period of six months, to report his or her intent to transfer any shares on the Taiwan Stock Exchange to the FSC at least three days before the intended transfer, unless the number of shares to be transferred does not exceed 10,000 shares.

 

In addition, the number of shares that can be sold or transferred on the Taiwan Stock Exchange by any person subject to the restrictions described above on any given day may not exceed:

 

· 0.2% of the outstanding shares of the company in the case of a company with no more than 30 million outstanding shares; or

 

· 0.2% of 30 million shares plus 0.1% of the outstanding shares exceeding 30 million shares in the case of a company with more than 30 million outstanding shares; or

 

· in any case, 5.0% of the average trading volume (number of shares) on the Taiwan Stock Exchange for the ten consecutive trading days preceding the reporting day on which the director, manager or substantial shareholder reports the intended share transfer to the FSC.

 

These restrictions do not apply to sales or transfers of our ADSs.

 

MATERIAL CONTRACT

 

Joint Venture Agreement between ASE and TDK Corporation

 

On May 8, 2015, we entered into a joint venture agreement with TDK Corporation, under which both parties would invest in ASEEE, a company limited by shares incorporated under ROC law. ASEEE will engage in the business of manufacture, marketing, distribution and sale of embedded substrates, and it plans to leverage TDK Corporation’s expertise, patents and knowledge in the field of SESUB technology. Pursuant to the joint venture agreement, TDK Corporation would provide ASEEE with certain materials required in the manufacturing of embedded substrates based on SESUB technology as well as necessary equipment. In August 2015, we invested NT$618.1 million (US$18.9 million) to subscribe for 651,809,660 shares of ASEEE, representing 51% shareholding in ASEEE. The investment in ASEEE is accounted for using the equity method.

 

Under the terms of the joint venture agreement, we are entitled to designate the chairman of the board of directors of ASEEE, as well as three out of the five directors who constitute the board of directors. However, according to the joint venture arrangement, certain corporate actions require the affirmative vote of at least two-thirds of directors.  As a result, we and TDK jointly direct the operating activities of ASEEE.

97

FOREIGN INVESTMENT IN THE ROC

 

Historically, foreign investment in the ROC securities market has been restricted. Since 1983, the ROC government has from time to time enacted legislation and adopted regulations to permit foreign investment in the ROC securities market.

 

On September 30, 2003, the Executive Yuan approved an amendment to the Regulations Governing Investment in Securities by Overseas Chinese and Foreign National, or the Regulations, which took effect on October 2, 2003. Pursuant to the Regulations, the FSC abolished the mechanism of the “qualified foreign institutional investors” and “general foreign investors” as stipulated in the Regulations before the amendment.

 

Under the Regulations, foreign investors (other than PRC persons) are classified as either “onshore foreign investors” or “offshore foreign investors” according to their respective geographical location. Both onshore and offshore foreign investors are allowed to invest in ROC securities after they register with the Taiwan Stock Exchange or the Taiwan Futures Exchange. The Regulations further classify foreign investors into foreign institutional investors and foreign individual investors. “Foreign institutional investors” refer to those investors incorporated and registered in accordance with foreign laws outside of the ROC (i.e., offshore foreign institutional investors) or their branches set up and recognized within the ROC (i.e., onshore foreign institutional investors). Offshore overseas Chinese and foreign individual investors may be subject to a maximum investment ceiling that will be separately determined by the FSC, after consultation with the Central Bank of the Republic of China (Taiwan). Currently, there is no maximum investment ceiling for offshore overseas Chinese and foreign individual investors. On the other hand, foreign institutional investors are not subject to any ceiling for investment in the ROC securities market.

 

Except for certain specified industries, such as telecommunications, investments in ROC-listed companies by foreign investors are not subject to individual or aggregate foreign ownership limits. Custodians for foreign investors are required to submit to the Central Bank of the Republic of China (Taiwan) and the Taiwan Stock Exchange a monthly report of trading activities and status of assets under custody and other matters. Capital remitted to the ROC under these guidelines may be remitted out of the ROC at any time after the date the capital is remitted to the ROC. Capital gains and income on investments may be remitted out of the ROC at any time.

 

Foreign investors (other than PRC persons) who wish to make (i) direct investments in the shares of ROC private companies or (ii) investment in 10.0% or more of the equity interest of a ROC company listed on the Taiwan Stock Exchange or the Taipei Exchange in any single transaction, are required to submit a foreign investment approval application to the MOEAIC or other applicable government authority. The MOEAIC or such other government authority reviews each foreign investment approval application and approves or disapproves each application after consultation with other governmental agencies (such as the Central Bank of the Republic of China (Taiwan) and the FSC).

 

Under current ROC law, any non-ROC person possessing a foreign investment approval may remit capital for the approved investment and is entitled to repatriate annual net profits, interest and cash dividends attributable to the approved investment. Dividends attributable to such investment may be repatriated upon submitting certain required documents to the remitting bank, and investment capital and capital gains attributable to such investment may be repatriated after approvals of the MOEAIC or other government authorities have been obtained.

 

In addition to the general restriction against direct investment by foreign investors in securities of ROC companies, foreign investors (except in certain limited cases) are currently prohibited from investing in certain industries in the ROC pursuant to a “negative list,” as amended by the Executive Yuan. The prohibition on foreign investment in the prohibited industries specified in the negative list is absolute in the absence of a specific exemption from the application of the negative list. Pursuant to the negative list, certain other industries are restricted so that foreign investors (except in limited cases) may invest in these industries only up to a specified level and with the special approval of the relevant competent authority that is responsible for enforcing the relevant legislation that the negative list is intended to implement.

 

 

98

The FSC announced the PRC Regulations on April 30, 2009. According to the PRC Regulations, a PRC QDII is allowed to invest in ROC securities (including less than 10.0% shareholding of a ROC company listed on the Taiwan Stock Exchange or the Taipei Exchange) provided that the total investment amount of any QDII does not exceed US$500 million. The custodians of QDIIs must apply with the Taiwan Stock Exchange for the remittance amount for each QDII, which cannot exceed US$100 million, and QDII can only invest in ROC securities at an amount approved by the Taiwan Stock Exchange. In addition, QDIIs are currently prohibited from investing in certain industries, and their investment in any company of certain other industries is restricted to a certain percentage pursuant to a list promulgated by the FSC and amended from time to time. PRC investors other than QDII are prohibited from making investments in a ROC company listed on the Taiwan Stock Exchange or the Taipei Exchange if the investment is less than 10.0% of the equity interest of such ROC company.

 

In addition to investments permitted under the PRC Regulations, PRC investors who wish to make (i) direct investment in the shares of ROC private companies or (ii) investments, individually or in the aggregate, in 10.0% or more of the equity interest of a ROC company listed on the Taiwan Stock Exchange or the Taipei Exchange, are required to submit an investment approval application to the MOEAIC or other government authority. The MOEAIC or such other government authority reviews each investment approval application and approves or disapproves each application after consultation with other governmental agencies.

 

In addition to the general restriction against direct investment by PRC investors in securities of ROC companies, PRC investors may only invest in certain industries on the “positive list” promulgated by the Executive Yuan. Furthermore, a PRC investor who wishes to be elected as a ROC company’s director or supervisor shall submit an investment approval application to the MOEAIC or other government authority for approval.

 

EXCHANGE CONTROLS

 

ROC Exchange Controls

 

The ROC Foreign Exchange Control Law and regulations provide that all foreign exchange transactions must be executed by banks designated by the FSC and by the Central Bank of the Republic of China (Taiwan) to engage in such transactions. Current regulations favor trade-related or service-related foreign exchange transactions. Consequently, foreign currency earned from exports of merchandise and services may now be retained and used freely by exporters, and all foreign currency needed for the importation of merchandise and services may be purchased freely from the designated foreign exchange banks.

 

Apart from trade-related or service-related foreign exchange transactions, ROC companies and individual residents of the ROC reaching the age of 20 years old may, without foreign exchange approval, remit foreign currency of up to US$50 million (or its equivalent) and US$5 million (or its equivalent) to and from the ROC, respectively, in each calendar year. The above limits apply to remittances involving either a conversion of NT dollars into a foreign currency or a conversion of foreign currency into NT dollars. In addition, a requirement is also imposed on all enterprises to register medium- and long-term foreign debt with the Central Bank of the Republic of China (Taiwan).

 

In addition, foreign persons may, subject to specified requirements but without foreign exchange approval of the Central Bank of the Republic of China (Taiwan), remit to and from the ROC foreign currencies of up to US$100,000 (or its equivalent) per remittance if the required documentation is provided to the ROC authorities. The above limit applies to remittances involving either a conversion of NT dollars into a foreign currency or a conversion of foreign currency into NT dollars. The above limit does not, however, apply to the conversion of NT dollars into other currencies, including U.S. dollars, from the proceeds of a sale of any underlying shares withdrawn from a depositary receipt facility.

 

TAXATION

 

ROC Taxation

 

The following discussion describes the material ROC tax consequences of the ownership and disposition of our common shares or ADSs to a non-resident individual or non-resident entity that owns our common shares or ADSs (referred to here as a “non-ROC holder”). As used in the preceding sentence, a “non-resident individual” is a non-ROC national who owns our common shares or ADSs and is not physically present in the ROC for 183 days or more during any calendar year, and a “non-resident entity” is a corporation or a non-corporate body that owns our common shares or ADSs, is organized under the laws of a jurisdiction other than the ROC and has no fixed place of business or business agent in the ROC.

 

99

Dividends

 

Dividends (whether in cash or common shares) declared by us out of retained earnings and distributed to a non-ROC holder are subject to ROC withholding tax, currently at the rate of 20% (unless a preferable tax rate is provided under a tax treaty between the ROC and the jurisdiction where the non-ROC holder is a resident) on the amount of the distribution (in the case of cash dividends) or on the par value of the distributed common shares (in the case of stock dividends). A 10% undistributed earnings tax is imposed on a ROC company for its after-tax earnings generated after January 1, 1998 which are not distributed in the following year. The undistributed earnings tax so paid will further reduce the retained earnings available for future distribution. When we declare a dividend out of those retained earnings, an amount in respect of the undistributed earnings tax, up to a maximum amount of 5% of the dividend to be distributed, will be credited against the withholding tax imposed on the non-ROC holders.

 

Distributions of common shares or cash out of capital reserves will not be subject to withholding tax, except under limited circumstances.

 

Capital Gains

 

Starting from January 1, 2016, capital gains realized upon the sale or other disposition of common shares are exempt from ROC income tax.

 

Sales of ADSs are not regarded as sales of ROC securities and thus any gains derived from transfers of ADSs by non-ROC holders are not currently subject to ROC income tax.

 

Securities Transaction Tax

 

Securities transaction tax will be imposed on the seller at the rate of 0.3% of the transaction price upon a sale of common shares. Transfers of ADSs are not subject to ROC securities transaction tax.

 

Subscription Rights

 

Distributions of statutory subscription rights for our common shares in compliance with the ROC Company Law are currently not subject to ROC tax. Sales of statutory subscription rights evidenced by securities are subject to securities transaction tax, currently at the rate of 0.3% of the gross amount received. Proceeds derived from sales of statutory subscription rights which are not evidenced by securities are not subject to securities transaction tax but are subject to income tax at a fixed rate of 20% of the income if the seller is a non-ROC holder. Subject to compliance with ROC law, we, in our sole discretion, may determine whether statutory subscription rights are evidenced by securities.

 

Estate and Gift Tax

 

ROC estate tax is payable on any property within the ROC left by a deceased non-resident individual, and ROC gift tax is payable on any property within the ROC donated by a non-resident individual. Estate tax and gift tax are currently imposed at the rate of 10%. Under the ROC Estate and Gift Tax Act, common shares issued by ROC companies are deemed located in the ROC without regard to the location of the owner. It is unclear whether a holder of ADSs will be considered to own common shares for this purpose.

 

Tax Treaty

 

At present, the ROC has income tax treaties with Indonesia, Singapore, New Zealand, Australia, the United Kingdom, South Africa, Gambia, Swaziland, Malaysia, Macedonia, the Netherlands, Senegal, Sweden, Belgium, Denmark, Israel, Vietnam, Paraguay, Hungary, France, India, Slovakia, Switzerland, Germany, Thailand, Kiribati, Luxembourg, Austria and Italy. These tax treaties may limit the rate of ROC withholding tax on dividends paid with respect to common shares issued by ROC companies. A non-ROC holder of ADSs may or may not be considered as the beneficial owner of common shares for the purposes of such treaties. Accordingly, holders of ADSs who wish to apply a reduced withholding tax rate that is provided under a tax treaty should consult their own tax advisers concerning such application. The United States does not have an income tax treaty with the ROC.

 

100

United States Federal Income Taxation

 

The following discussion describes the material U.S. federal income tax consequences of the ownership and disposition of our common shares or ADSs to those U.S. Holders described below who hold such common shares or ADSs as capital assets for U.S. federal income tax purposes. As used herein, a “U.S. Holder” is a beneficial owner of our common shares or ADSs that is for U.S. federal income tax purposes:

 

· a citizen or individual resident of the United States;

 

· a corporation, or other entity taxable as a corporation, created or organized under the laws of the United States or of any political subdivision of the United States; or

 

· an estate or trust the income of which is subject to U.S. federal income taxation regardless of its source.

 

This discussion assumes that we are not a passive foreign investment company, as discussed below.

 

This discussion does not address all of the tax consequences that may be relevant in light of a U.S. Holder’s particular circumstances. In particular, it does not address all of the tax consequences that may be relevant to holders subject to special rules, including:

 

· persons subject to the alternative minimum tax;

 

· persons subject to taxation under the provisions of the Internal Revenue Code of 1986, as amended (the “Code”), known as the Medicare contribution tax;

 

· insurance companies;

 

· tax-exempt entities, including “individual retirement accounts” or “Roth IRAs”;

 

· dealers or traders in securities who use a mark-to-market method of accounting for U.S. federal income tax purposes;

 

· certain financial institutions;

 

· partnerships or other entities classified as partnerships for U.S. federal income tax purposes;

 

· persons holding common shares or ADSs in connection with a trade or business conducted outside of the U.S.;

 

· persons who hold or will hold common shares or ADSs as part of a straddle, hedge, conversion transaction, integrated transaction or similar transaction;

 

· persons whose functional currency for U.S. federal income tax purposes is not the U.S. dollar;

 

· persons who own or are deemed to own 10% or more of our voting stock; or

 

· persons who acquired our common shares or ADSs pursuant to the exercise of any employee stock option or otherwise as compensation.

 

If an entity that is classified as a partnership for U.S. federal income tax purposes holds our common shares or ADSs, the U.S. federal income tax treatment of a partner will generally depend on the status of the partner and the activities of the partnership. Partnerships holding our common shares or ADSs and partners in such partnerships should consult their tax advisers as to the particular U.S. federal income tax consequences of holding and disposing of our common shares or ADSs.

 

This discussion is based on the Code, final, temporary and proposed Treasury regulations, administrative pronouncements and judicial decisions, all as of the date hereof. These laws and regulations are subject to change, possibly with retroactive effect. This discussion is also based in part on representations by the depositary and assumes that each obligation under the deposit agreement and any related agreement will be performed in accordance with its terms.

 

101

In general, for U.S. federal income tax purposes, a U.S. Holder who owns ADSs should be treated as the owner of the common shares represented by the ADSs. Accordingly, no gain or loss should be recognized if a U.S. holder exchanges ADSs for the common shares represented by those ADSs.

 

The U.S. Treasury has expressed concerns that parties to whom American depositary shares are released before delivery of shares to the depositary (“pre-release”), or intermediaries in the chain of ownership between holders and the issuer of the security underlying the American depositary shares, may be taking actions that are inconsistent with the claiming of foreign tax credits by the holders of American depositary shares. Such actions would also be inconsistent with the claiming of the preferential rates of tax applicable to dividends received by certain non-corporate U.S. holders. Accordingly, the creditability of ROC taxes and the availability of the preferential tax rates for dividends received by certain non-corporate U.S. Holders, both described below, could be affected by actions that may be taken by such parties or intermediaries.

 

U.S. Holders should consult their tax advisers with regard to the application of the U.S. federal income tax laws to their common shares or ADSs as well as any tax consequences arising under the laws of any state, local or non-U.S. taxing jurisdiction.

 

Dividends

 

Distributions paid on our common shares or ADSs (other than certain pro rata distributions of our common shares to all shareholders, including holders of ADSs), including the amount of any ROC taxes withheld thereon, reduced by any credit against the withholding tax on account of the 10% retained earnings tax imposed on us, generally will constitute foreign-source dividend income to the extent paid out of our current or accumulated earnings and profits as determined in accordance with U.S. federal income tax principles. Because we do not maintain calculations of our earnings and profits under U.S. federal income tax principles, we expect that distributions generally will be reported to U.S. Holders as dividends. The amount a U.S. Holder will be required to include in income for any dividend paid in NT dollars will be equal to the U.S. dollar value of the NT dollars paid, calculated by reference to the exchange rate in effect on the date the payment is received by the depositary (in the case of ADSs) or by a U.S. Holder (in the case of common shares), regardless of whether the payment is in fact converted into U.S. dollars on the date of receipt. If a U.S. Holder does not convert the NT dollars so received into U.S. dollars on the date of receipt, any gain or loss recognized on a subsequent sale or other disposition of the NT dollars generally will be U.S.-source ordinary income or loss. The amount of any taxable distribution of property other than cash will be the fair market value of such property on the date of distribution. Dividends will not be eligible for the dividends-received deduction generally available to U.S. corporations under the Code.

 

Subject to applicable limitations and the discussion above regarding concerns expressed by the U.S. Treasury, under current law, certain dividends paid by qualified foreign corporations to certain non-corporate U.S. Holders are taxable at the preferential rates applicable to long-term capital gain. A foreign corporation is treated as a qualified foreign corporation with respect to dividends paid by that corporation on shares (or ADSs representing such shares) that are readily tradable on a securities market in the United States, such as the New York Stock Exchange, where our ADSs are traded. U.S. Holders should consult their tax advisers to determine whether these preferential rates may apply to dividends they receive and whether they are subject to any special rules that limit their ability to be taxed at these preferential rates.

 

Subject to applicable limitations and restrictions, some of which vary depending upon the U.S. Holder’s circumstances, and the discussion above regarding concerns expressed by the U.S. Treasury, the ROC taxes withheld from dividend distributions, reduced by any credit against the withholding tax which is paid by us on account of the 10% retained earnings tax, will be eligible for credit against the U.S. Holder’s U.S. federal income tax liability. The limitation on foreign taxes eligible for credit is calculated separately with respect to specific classes of income. The rules governing foreign tax credits are complex and, therefore, U.S. Holders should consult their tax advisers regarding the availability of foreign tax credits in their particular circumstances. Instead of claiming a credit, U.S. Holders may, at their election, deduct otherwise creditable ROC taxes in computing their taxable income, subject to generally applicable limitations under U.S. law. An election to deduct foreign taxes instead of claiming foreign tax credits applies to all taxes paid or accrued in the taxable year to foreign countries and possessions of the United States.

 

102

Certain pro rata distributions of common shares by a company to its shareholders, including holders of ADSs, will not be subject to U.S. federal income tax. Accordingly, these distributions will not give rise to U.S. federal income against which the ROC tax imposed on these distributions may be credited. U.S. Holders should consult their tax advisers as to whether any ROC tax imposed on such distributions may be creditable against their U.S. federal income tax on foreign-source income from other sources.

 

Capital Gains

 

A U.S. Holder generally will recognize U.S.-source capital gain or loss for U.S. federal income tax purposes on the sale or exchange of our common shares or ADSs, which will be long-term capital gain or loss if our common shares or ADSs were held by the U.S. Holder for more than one year. The amount of gain or loss will be equal to the difference between the U.S. Holder’s tax basis in our common shares or ADSs disposed of and the amount realized on disposition, in each case as determined in U.S. dollars. A U.S. Holder’s basis in our common shares or ADSs will generally equal the U.S. Holder’s cost of such common shares or ADSs. If a U.S. Holder receives our common shares or ADSs in a non-taxable pro rata distribution with respect to its ADSs or common shares (the “new securities”), the basis of such new securities must be determined by allocating the basis of the common shares or ADSs with respect to which the new securities were issued (the “old securities”) between the old securities and new securities in proportion to their fair market values on the date of distribution. U.S. Holders should consult their tax advisers about the treatment of capital gains, which may be taxed at lower rates than ordinary income for non-corporate taxpayers, and capital losses, the deductibility of which may be limited.

 

Passive Foreign Investment Company Rules

 

We believe that we were not a passive foreign investment company, or PFIC, for U.S. federal income tax purposes for our 2015 taxable year. However, since PFIC status depends upon the composition of a company’s income and assets and the market value of its assets (including, among others, less than 25 percent owned equity investments) from time to time, there can be no assurance that we will not be considered a PFIC for any taxable year.

 

If we were treated as a PFIC for any taxable year during which a U.S. Holder held a common share or an ADS, certain adverse consequences could apply to that U.S. Holder. If we are a PFIC for any taxable year during which a U.S. Holder owned a common share or an ADS, such U.S. Holder will generally be required to file Internal Revenue Service Form 8621 with their annual U.S. federal income tax returns, subject to certain exceptions.

 

Information Reporting and Backup Withholding

 

Payments of dividends and sales proceeds that are made within the United States or through certain U.S.-related financial intermediaries generally are subject to information reporting, and may be subject to backup withholding, unless (i) the U.S. Holder is an exempt recipient or (ii) in the case of backup withholding, the U.S. Holder provides a correct taxpayer identification number and certifies that it is not subject to backup withholding.

 

The amount of any backup withholding from a payment to a U.S. Holder will be allowed as a credit against the U.S. Holder’s U.S. federal income tax liability and may entitle it to a refund, provided that the required information is timely furnished to the Internal Revenue Service.

 

DIVIDENDS AND PAYING AGENTS

 

Not applicable.

 

STATEMENT BY EXPERTS

 

Not applicable.

 

DOCUMENTS ON DISPLAY

 

We file annual reports on Form 20-F and periodic reports on Form 6-K with the SEC. You can read and copy these reports and other information at the SEC’s Public Reference Room at 450 Fifth Street, N.W., Washington, D.C. 20549. You can also request copies of the documents, upon payment of a duplicating fee, by writing to the Public Reference Section of the SEC. Please call the SEC at 1-800-SEC-0330 for further information on the operation of the Public Reference Room. The reports and other information we file electronically with the SEC are also available to the public from the SEC’s website at http://www.sec.gov.

 

103

SUBSIDIARY INFORMATION

 

Not applicable.

 

Item 11. Quantitative and Qualitative Disclosures about Market Risk

 

Market Risk

 

Our exposure to financial market risks relates primarily to changes in interest rates and foreign currency exchange rates.

 

Interest Rate Risk. Our exposure to interest rate risks relates primarily to our long-term floating rate loans, which is normally incurred to support our corporate activities and capital expenditures. See note 31 to our consolidated financial statements included in this annual report for details on interest rate sensitivity analysis.

 

We entered into several interest rate swap contracts to mitigate the interest rate risk on our long-term loans. In April 2013, J&R Holding Limited entered into an interest rate swap contract in the amount of RMB240.0 million, which matured in April 2014, with interest receipt based on a floating rate of 1.05% to 2.80% and payment based on a fixed rate of 2.0%. In February 2014, J&R Holding Limited entered into another interest rate swap contract in the amount of RMB240.0 million, which had the maturity schedule in February 2015 but was early settled in May 2014, with interest receipt based on a floating rate of 1.20% to 1.40% and payment based on a fixed rate of 1.35%. We recognized these contracts as hedging derivative liabilities-current with an adjustment to shareholders’ equity.

 

In October 2015, we entered into an interest rate swap contract in the amount of NT$1,000.0 million (US$30.5 million), which will mature in October 2016, with interest receipt based on a floating rate of 0.00% to 5.00% and payment based on a fixed rate of 4.60%. See note 7 to our consolidated financial statements included in this annual report for details of the contract. The fair value of the contract as of December 31, 2015 was negative NT$0.1 million (US$0.003 million) and we recognized it as financial liabilities held for trading with an adjustment to profit or loss.

 

The tables below set forth information relating to our significant obligations, including short-term borrowings and long-term borrowings, including bank loans, bills payable, capital lease obligations and bonds payable, that are sensitive to interest rate fluctuations as of December 31, 2015.

 

    Expected Maturity Date
    2016   2017   2018   2019   2020   Thereafter   Total   Fair Value
    (in millions, except percentages)
Short-term borrowings:                                                                
Variable rate (NT$)     100.0                                     100.0       100.0  
Average interest rate     0.99%                                     0.99%          
Fixed rate (NT$)     11,780.0                                     11,780.0       11,780.0  
Average interest rate     0.79%                                     0.79%          
Variable rate (US$)     125.1                                     125.1       125.1  
Average interest rate     1.25%                                     1.25%          
Fixed rate (US$)     163.4                                     163.4       163.4  
Average interest rate     1.10%                                     1.10%          
Variable rate (RMB)     2,688.3                                     2,688.3       2,688.3  
Average interest rate     3.79%                                     3.79%          
Fixed rate (RMB)     5.0                                     5.0       5.0  
Average interest rate     5.08%                                     5.08%          
Fixed rate (EUR)     56.3                                     56.3       56.3  
Average interest rate     0.71%                                     0.71%          
                                                                 
Long-term borrowings:                                                                
Variable rate (NT$)     683.3       11,642.2       4,211.1       833.4                   17,370.0       17,370.0  
Average interest rate     1.13%       0.89%       1.08%       1.16%                   0.96%          
Fixed rate (NT$)     8,000.0             1,500.0                         9,500.0       9,500.0  
Average interest rate     1.45%             1.17%                         1.41%          
Variable rate (US$)     104.3       369.6       210.0                         683.9       683.9  
Average interest rate     1.96%       1.91%       2.07%                         1.96%          
Fixed rate (US$)     0.0       300.1       0.1                         300.2       300.2  
Average interest rate     5.72%       2.13%       5.71%                         2.13%          
Variable rate (RMB)     11.3       23.7       88.0       187.0       198.0       135.2       643.2       643.2  
Average interest rate     4.64%       6.34%       9.20%       6.52%       7.63%       7.46%       7.39%          
Fixed rate (RMB)     500.5       0.0                               500.5       500.5  
Average interest rate     4.25%       2.29%                               4.25%          

 

104

Foreign Currency Exchange Rate Risk. Our foreign currency exposure gives rise to market risk associated with exchange rate movements against the NT dollar, our functional currency. Currently, the majority of our revenues are denominated in U.S. dollars, with a portion denominated in NT dollars and Japanese yen. Our costs of revenues and operating expenses are incurred in several currencies, primarily in NT dollars, U.S. dollars, RMB, Japanese yen, Korean won, as well as, to a lesser extent, Singapore dollars and Malaysian ringgit. In addition, a substantial portion of our capital expenditures, primarily for the purchase of packaging and testing equipment, has been, and is expected to continue to be, denominated primarily in U.S. dollars with the remainder in Japanese yen. The majority of our borrowings are denominated in NT dollars, U.S. dollars and RMB. Fluctuations in exchange rates, primarily among the U.S. dollar against the NT dollar, RMB and the Japanese yen, will affect our costs and operating margins and could result in exchange losses and increased costs in NT dollar and other local currency terms. See note 31 to our consolidated financial statements included in this annual report for details on foreign currency exchange rate sensitivity analysis.

 

Despite hedging and mitigating techniques implemented by us, fluctuations in exchange rates have affected, and may continue to affect, our financial condition and results of operations. We recorded net foreign exchange losses of NT$276.2 million, NT$1,222.0 million and NT$713.2 million (US$21.8 million) in 2013, 2014 and 2015, respectively. In 2013, 2014 and 2015, the average exchange rate of the NT dollar to the U.S. dollar was 29.73, 30.38 and 31.80, respectively, calculated based on the statistical release by the Federal Reserve Board. To protect against reductions in value and the volatility of future cash flows caused by changes in foreign currency exchange rates, we utilize currency forward contracts and swap contracts from time to time to reduce the impact of foreign currency fluctuations on our results of operations. Our policy is to account for these contracts on a mark-to-market rate basis.

 

The table below sets forth our outstanding forward exchange contracts and swap contracts, for which the expected maturity dates are in 2016, in aggregate terms by type of contract as of December 31, 2015.

 

Forward Exchange Contracts and Swap Contracts

 

    Forward Exchange Contracts   Swap Contracts
         
Buy US$ against NT$        
Notional Amount   US$10.0 million   US$1,802.8 million
Weighted Average Strike Price   US$/NT$ 32.540   US$/NT$ 31.924
Fair Value   US$0.150 million   US$42.626 million
         
Sell US$ against NT$        
Notional Amount   US$155.0 million   US$91.8 million
Weighted Average Strike Price   US$/NT$ 32.827   US$/NT$ 32.757
Fair Value   Negative US$0.673 million   Negative US$0.176 million
         
Sell US$ against RMB        
Notional Amount   US$121.0 million   US$353.9 million
Weighted Average Strike Price   US$/RMB 6.448   US$/RMB 6.375
Fair Value   Negative US$1.179 million   Negative US$8.456 million
         
Sell US$ against JP¥        
Notional Amount   US$14.0 million   US$67.1 million
Weighted Average Strike Price   US$/JP¥ 122.385   US$/JP¥ 122.756
Fair Value   US$0.236 million   US$1.458 million
         
Sell US$ against MYR        
Notional Amount   US$6.0 million  
Weighted Average Strike Price   US$/MYR 4.254  
Fair Value   Negative US$0.066 million  
         
Sell US$ against SGD        
Notional Amount   US$11.4 million  
Weighted Average Strike Price   US$/SGD 1.410  
Fair Value   Negative US$0.035 million  
         
Sell US$ against KRW      
Notional Amount   US$8.0 million  
Weighted Average Strike Price   US$/KRW 1,177.544  
Fair Value   US$0.033 million  

 

105

Other Market Risk. Our exposure to other market risk relates primarily to our investments in publicly-traded stock, private-placement bonds, open-end mutual funds and limited partnership interests. The value of these investments may fluctuate based on various factors including prevailing market conditions. Moreover, the fair value of investments in unlisted securities may be significantly different from their carrying value. As of December 31, 2015, our investments in publicly traded stock, open-end mutual funds and private-placement bonds classified as financial assets at fair value through profit or loss were NT$710.8 million (US$21.7 million). As of December 31, 2015, our investments classified as available-for-sale financial assets were NT$954.7 million (US$29.1 million), primarily consisting of publicly-traded stock, open-end mutual funds and limited partnership interests. If the fair values of these investments fluctuate by 1.0%, our profit before income tax will increase or decrease by approximately NT$7.1 million (US$0.2 million) for the same period, and our other comprehensive before income tax will increase or decrease by approximately NT$10.0 million (US$0.3 million) for the same period. In addition, we are also exposed to our share price risk through conversion option, redemption option and put option of convertible bonds recognized as financial liabilities held for trading. If our share price increases or decreases by 7.0%, our profit before income tax for the year ended December 31, 2015 will decrease by NT$605.0 million (US$18.5 million) or increase by NT$638.0 million (US19.5 million), respectively. Furthermore, fluctuations in gold prices may also affect the price at which we have been able to purchase gold wire. How this will impact the results of our operations depends on whether such costs can be transferred onto our customers.

 

Item 12. Description of Securities Other Than Equity Securities

 

DEBT SECURITIES

 

Not applicable.

 

WARRANTS AND RIGHTS

 

Not applicable.

 

OTHER SECURITIES

 

Not applicable.

 

AMERICAN DEPOSITARY SHARES

 

Depositary Fees and Charges

 

Under the terms of the amended and restated deposit agreement dated September 29, 2000 among Citibank, N.A., as depositary, holders and beneficial owners of ADSs and us, which was filed as an exhibit to our registration statement on Form F-6 on September 16, 2003, and its two amendments, which were filed as an exhibit to our registration statement on post-effective amendment No. 1 to Form F-6 on April 3, 2006 and our registration statement on post-effective amendment No. 2 to Form F-6 on October 25, 2006, respectively, for our ADSs, an ADS holder may have to pay the following service fees to the depositary bank:

 

106

Service

Fees

Issuance of ADSs Up to US$5.00 per 100 ADSs (or fraction thereof) issued
Delivery of deposited securities against surrender of ADSs Up to US$5.00 per 100 ADSs (or fraction thereof) surrendered
Distribution of cash dividends or other cash distributions Up to US$5.00 per 100 ADSs (or fraction thereof) held, unless prohibited by the exchange upon which the ADSs are listed
Distribution of ADSs pursuant to (i) stock dividends or other free stock distributions, or (ii) exercises of rights to purchase additional ADSs Up to US$5.00 per 100 ADSs (or fraction thereof) held, unless prohibited by the exchange upon which the ADSs are listed
Distribution of securities other than ADSs or rights to purchase additional ADSs Up to US$5.00 per 100 ADSs (or fraction thereof) held
Depositary Services Up to US$5.00 per 100 ADSs (or fraction thereof) held, unless prohibited by the exchange upon which the ADSs are listed
Transfer of ADRs US$1.50 per certificate presented for transfer

 

An ADS holder will also be responsible to pay certain fees and expenses incurred by the depositary bank and certain taxes and governmental charges such as:

 

· taxes (including applicable interest and penalties) and other governmental charges;

 

· such registration fees as may from time to time be in effect for the registration of shares or other deposited securities on the share register and applicable to transfers of shares or other deposited securities to or from the name of the custodian, the depositary or any nominees upon the making of deposits and withdrawals, respectively;

 

· such cable, telex and facsimile transmission and delivery expenses as are expressly provided in the Deposit Agreement to be at the expense of the person depositing or withdrawing shares or holders and beneficial owners of ADSs;

 

· the expenses and charges incurred by the depositary in the conversion of foreign currency;

 

· such fees and expenses as are incurred by the depositary in connection with compliance with exchange control regulations and other regulatory requirements applicable to shares, deposited securities, ADSs and ADRs; and

 

· the fees and expenses incurred by the depositary, the custodian or any nominee in connection with the servicing or delivery of deposited securities.

 

Depositary fees payable upon the issuance and cancellation of ADSs are typically paid to the depositary bank by the brokers (on behalf of their clients) receiving the newly-issued ADSs from the depositary bank and by the brokers (on behalf of their clients) delivering the ADSs to the depositary bank for cancellation. The brokers in turn charge these transaction fees to their clients.

 

Depositary fees payable in connection with distributions of cash or securities to ADS holders and the depositary services fee are charged by the depositary bank to the holders of record of ADSs as of the applicable ADS record date. Depositary fees payable for cash distributions are generally deducted from the cash being distributed. In case of distributions other than cash ( i.e. , stock dividends, rights offerings), the depositary bank charges the applicable fee to the ADS record date holders concurrent with the distribution. In the case of ADSs registered in the name of the investor (whether certificated or un-certificated in direct registration), the depositary bank sends invoices to the applicable record date ADS holders. In case of ADSs held in brokerage and custodian accounts via the central clearing and settlement system, The Depository Trust Company (DTC), the depositary bank generally collects its fees through the systems provided by DTC (whose nominee is the registered holder of the ADSs held in DTC) from the brokers and custodians holding ADSs in their DTC accounts. The brokers and custodians who hold their clients’ ADSs in DTC accounts in turn charge their clients’ accounts the amount of the fees paid to the depositary banks.

 

107

In the event of refusal to pay depositary fees, the depositary bank may, under the terms of the Deposit Agreement, refuse the requested service until payment is received or may set-off the amount of the depositary fees from any distribution to be made to the ADS holder. Note that the fees and charges you may be required to pay may vary over time and may be changed by us and by the depositary bank. You will receive prior notice of such changes.

 

Depositary Payments

 

In 2015, we received US$103,528.8 from Citibank, N.A., the depositary bank for our ADR programs. The table below sets forth details of the amount we received from Citibank, N.A.

 

Depositary Payments    
Reimbursement of proxy process expenses   US$ 43,199.1  
Reimbursement of ADR holders identification expenses   US$ 745.8  
Reimbursement of legal fees   US$ 59,583.9  
Direct reimbursement   US$ 0.0  
Net payment received by us (1)   US$ 103,528.8  

_____ _____________

(1) Net of U.S. withholding tax.

 

PART II

 

Item 13. Defaults, Dividend Arrearages and Delinquencies

 

Not applicable.

 

Item 14. Material Modifications to the Rights of Security Holders and Use of Proceeds

 

Not applicable.

 

Item 15. Controls and Procedures

 

Disclosure Controls and Procedures

 

As of December 31, 2015, we, under the supervision and with the participation of our management, including our Chief Executive Officer and Chief Financial Officer, performed an evaluation of the effectiveness of our disclosure controls and procedures as defined in Rules 13a-15(e) and 15(d)-15(e) under the Exchange Act. Our management necessarily applied its judgment in assessing the costs and benefits of such controls and procedures, which by their nature can provide only reasonable assurance regarding management’s control objectives. Based on this evaluation, our Chief Executive Officer and Chief Financial Officer concluded that our disclosure controls and procedures are effective for recording, processing, summarizing and reporting, within the time periods specified in the SEC’s rules and forms, information required to be disclosed in the reports we file or submit under the Exchange Act, and for accumulating and communicating such information to our management, including our Chief Executive Officer and Chief Financial Officer, as appropriate to allow timely decisions regarding required disclosure.

 

Management’s Annual Report on Internal Control Over Financial Reporting

 

Our management is responsible for establishing and maintaining adequate internal control over financial reporting, as defined in Rule 13a-15(f) and 15d-15(f) promulgated under the Securities Exchange Act of 1934.

 

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

 

Our management assessed the effectiveness of our internal control over financial reporting as of December 31, 2015. In making this assessment, our management used the criteria set forth by the Committee of Sponsoring Organizations of the Treadway Commission (COSO) in Internal Control-Integrated Framework (2013).

 

108

Based on this assessment, management concluded that, as of December 31, 2015, our internal control over financial reporting is effective based on those criteria.

 

Our independent registered public accounting firm, Deloitte & Touche, independently assessed the effectiveness of our internal control over financial reporting. Deloitte & Touche has issued an attestation report, which is included below.

 

Report of the Independent Registered Public Accounting Firm

 

To: the Board of Directors and Shareholders of Advanced Semiconductor Engineering, Inc.

 

We have audited the internal control over financial reporting of Advanced Semiconductor Engineering, Inc. and its subsidiaries (the “Company”) as of December 31, 2015, based on the criteria established in Internal Control-Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission. The Company's management is responsible for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting, included in the accompanying Management’s Annual Report on Internal Control over Financial Reporting. Our responsibility is to express an opinion on the Company's internal control over financial reporting based on our audit.

 

We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, testing and evaluating the design and operating effectiveness of internal control based on the assessed risk, and performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.

 

A company’s internal control over financial reporting is a process designed by, or under the supervision of, the company’s principal executive and principal financial officers, or persons performing similar functions, and effected by the company’s board of directors, management, and other personnel to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with International Financial Reporting Standards as issued by the International Accounting Standards Board. A company’s internal control over financial reporting includes those policies and procedures that (i) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (ii) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with International Financial Reporting Standards as issued by the International Accounting Standards Board, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (iii) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.

 

Because of the inherent limitations of internal control over financial reporting, including the possibility of collusion or improper management override of controls, material misstatements due to error or fraud may not be prevented or detected on a timely basis. Also, projections of any evaluation of the effectiveness of the internal control over financial reporting to future periods are subject to the risk that the controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

 

In our opinion, the Company maintained, in all material respects, effective internal control over financial reporting as of December 31, 2015, based on the criteria established in Internal Control-Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission.

 

We have also audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the consolidated financial statements of the Company as of and for the year ended December 31, 2015 and our report dated April 28, 2016 expressed an unqualified opinion on those financial statements and included an explanatory paragraph regarding the convenience translation of New Taiwan dollar amounts into U.S. dollar amounts.

 

/s/ Deloitte & Touche

 

Taipei, Taiwan

The Republic of China

April 28, 2016

109

Changes in Internal Control Over Financial Reporting

 

There has been no change in our internal control over financial reporting that occurred during the period covered by this annual report that has materially affected, or is reasonably likely to materially affect, our internal control over financial reporting.

 

Item 16. [Reserved]

 

Item 16A. Audit Committee Financial Expert

 

Our board of directors determined that Shen-Fu Yu, Ta-Lin Hsu and Mei-Yueh Ho are audit committee financial experts as defined under the applicable rules of the SEC issued pursuant to Section 407 of the Sarbanes-Oxley Act of 2002 and are independent for the purposes of Rule 10A-3 of the Exchange Act.

 

Item 16B. Code of Ethics

 

We have adopted a code of ethics that satisfies the requirements of Item 16B of Form 20-F and applies to all employees, officers, supervisors and directors of our Company and subsidiaries, including our Chief Executive Officer, Chief Financial Officer and principal accounting officer. Our board of directors has approved and adopted the amended Code of Business Conduct and Ethics (“the Amended Code”) which came into force with effect from April 28, 2016. The amendments aim to build more robust and effective policies and procedures to enable high ethical standards of business conduct that can be persistently maintained, and mainly addressed revised policies with respect to anti-corruption, fair competition, avoidance of conflict of interest, prohibition against insider trading, anti-money laundering, protection to labor as well as whistleblowing policy and regulatory compliance. The Amended Code continues to apply to all employees, officers, supervisors and directors of our Company and subsidiaries, including our Chief Executive Officer, Chief Financial Officer and principal accounting officer. We have posted our code of ethics on our website at http://www.aseglobal.com .

 

Item 16C. Principal Accountant Fees and Services

 

Policy on Pre-Approval of Audit and Non-Audit Services of Independent Registered Public Accounting Firm

 

Our audit committee, which was established on July 22, 2005, pre-approves all audit and non-audit services provided by our independent registered public accounting firm, including audit services, audit-related services, tax services and other services, on a case-by-case basis.

 

Independent Registered Public Accounting Firm’s Fees

 

The following table sets forth the aggregate fees by categories specified below in connection with certain professional services rendered by Deloitte & Touche. We did not pay any other fees to our independent registered public accounting firm during the periods indicated below.

 

    For the Year Ended December 31,
    2013   2014   2015
    NT$   NT$   NT$   US$
     
Audit fees (1)     140,876.7       158,962.4       161,476.9       4,924.6  
Audit-related fees (2)     8,049.4       5,000.0       4,000.0       122.0  
Tax fees (3)     13,409.8       20,160.6       13,020.0       397.0  
All other fees (4)     5,077.0       5,592.2       10,541.6       321.5  
Total     167,412.9       189,715.2       189,038.5       5,765.1  

________________

(1) Audit fees are defined as the standard audit and review work that needs to be performed each year in order to issue an opinion on our consolidated financial statements and to issue reports on the local statutory financial statements. It also includes services that can only be provided by our auditor such as statutory audits required by the Tax Bureau of the ROC and the Customs Bureau of the ROC, consents and comfort letters and any other audit services required for SEC or other regulatory filings.

 

110

(2) Audit-related fees consist of assurance and related services by Deloitte & Touche that are reasonably related to the performance of the audit or review of our financial statements and are not reported above under Audit Fees. The service for the fees disclosed under this category relate to cash capital increase and bonds offering.

 

(3) Tax fees consist of professional services rendered by Deloitte & Touche for tax compliance and tax advice. The services for the fees disclosed under this category include tax return preparation and technical tax advice.

 

(4) Other fees primarily consist of risk management advisory fee and business operation and process advisory fee, among others.

 

Item 16D. Exemptions from the Listing Standards for Audit Committees

 

Not applicable.

 

Item 16E. Purchases of Equity Securities by the Issuer and Affiliated Purchasers

 

Share Repurchase

 

On November 29, 2010, we announced a share repurchase program, or Third Share Repurchase, to repurchase up to 37.0 million of our common shares at prices between NT$25.0 to NT$41.0 per share during the period from November 30, 2010 to January 28, 2011. This share repurchase program concluded on December 6, 2010, when a total of 37.0 million of our common shares had been repurchased pursuant to this program. As of January 19, 2011, all of these common shares we repurchased had been cancelled. On August 15, 2011, we announced a share repurchase program, or Fourth Share Repurchase, to repurchase up to 34.0 million of our common shares at prices between NT$20.0 to NT$45.0 per share during the period from August 16, 2011 to October 15, 2011. This share repurchase program concluded on August 29, 2011, when a total of 34.0 million of our common shares had been repurchased pursuant to this program. On September 1, 2011, we announced a share repurchase program, or Fifth Share Repurchase, to repurchase up to 50.0 million of our common shares at prices between NT$20.0 to NT$42.0 per share during the period from September 2, 2011 to November 1, 2011. This share repurchase program concluded on September 16, 2011, when a total of 50.0 million of our common shares had been repurchased pursuant to this program. On September 20, 2011, we announced a share repurchase program, or Sixth Share Repurchase, to repurchase up to 30.0 million of our common shares at prices between NT$22.0 to NT$40.0 per share during the period from September 21, 2011 to November 20, 2011. This share repurchase program concluded on November 20, 2011, when a total of 21.475 million of our common shares had been repurchased pursuant to this program. As of January 19, 2012, all of these common shares we repurchased had been cancelled. On February 26, 2015, we announced a share repurchase program, or Seventh Share Repurchase, approved by our board of directors, to repurchase up to 120.0 million of our common shares, which accounts for 1.53% of our total issued shares, at prices between NT$32.0 to NT$55.0 per share during the period from March 2, 2015 to April 30, 2015. The program authorized us to repurchase up to NT$6,600 million worth of our issued common shares in open market transactions. This share repurchase program concluded on March 27, 2015. A total of 120.0 million of our common shares had been repurchased pursuant to this program.

 

111

The table below sets forth certain information about the repurchase of our common shares under these share repurchase programs.

 

Period   Total Number of Common Shares Purchased   Average Price Paid Per Common Share   Total Number of Common Shares Purchased as Part of Publicly Announced Programs   Maximum Number (or Approximate Dollar Value) of Common Shares that May Yet Be Purchased Under the Programs
Third Share Repurchase                                
November 2010 (November 30, 2010)     7,300,000       31.48       7,300,000       29,700,000  
December 2010 (December 1, 2010 – December 6, 2010)     29,700,000       32.17       29,700,000        
Total     37,000,000       32.03       37,000,000        
Fourth Share Repurchase                                
August 2011 (August 16, 2011 – August 29, 2011)     34,000,000       25.72       34,000,000        
Fifth Share Repurchase                                
September 2011 (September 2, 2011 – September 16, 2011)     50,000,000       26.68       50,000,000        
Sixth Share Repurchase                                
September 2011 (September 21, 2011 – September 30, 2011)     6,488,000       27.15       6,488,000       23,512,000  
October 2011 (October 1, 2011 – October 31, 2011)     14,316,000       25.85       20,804,000       9,196,000  
November 2011 (November 1, 2011 – November 20, 2011)     671,000       26.72       21,475,000       8,525,000  
Total     21,475,000       26.27       21,475,000       8,525,000  
Seventh Share Repurchase                                
March 2015 (March 2, 2015 – March 27, 2015)     120,000,000       44.45       120,000,000        

 

Item 16F. Change In Registrant’s Certifying Accountant

 

Not applicable.

 

Item 16G. Corporate Governance

 

As a company listed on the New York Stock Exchange, or the NYSE, we are subject to certain corporate governance rules of the NYSE. The application of the NYSE’s corporate governance rules is limited for foreign private issuers, recognizing that they have to comply with domestic requirements. As a foreign private issuer, we must comply with the following NYSE corporate governance rules: 1) satisfy the audit committee requirements of the SEC; 2) chief executive officer must promptly notify the NYSE in writing upon becoming aware of any material non-compliance with applicable NYSE corporate governance rules; 3) submit annual and interim affirmations to the NYSE regarding compliance with applicable NYSE corporate governance requirements; and 4) provide a brief description of any significant differences between our corporate governance practices and those required of U.S. companies under the NYSE listing standards. The table below sets forth the significant differences between our corporate governance practices and those required of U.S. companies under the NYSE listing standards.

 

New York Stock Exchange Corporate Governance
Rules Applicable to U.S. Companies 

Description of Significant Differences between Our Governance Practices and the NYSE Corporate Governance Rules Applicable to U.S. Companies 

Director independence
Listed companies must have a majority of independent directors, as defined under the NYSE listing standards.

Three members of our board of directors are independent as defined in Rule 10A-3 under the Exchange Act. We do not assess the independence of our directors under the independence requirements of the NYSE listing standards.

 
Pursuant to relevant laws and regulations of the ROC, we have three independent directors on our board of directors that were elected through the candidate nomination system at our annual general meeting on June 23, 2015.

 

 

112

New York Stock Exchange Corporate Governance
Rules Applicable to U.S. Companies 

Description of Significant Differences between Our Governance Practices and the NYSE Corporate Governance Rules Applicable to U.S. Companies 

To empower non-management directors to serve as a more effective check on management, the non-management directors of each company must meet at regularly scheduled executive sessions without management. All of our directors attend the meetings of the board of directors. Our non-management directors do not meet at regularly scheduled executive sessions without management. The ROC Company Law does not require companies incorporated in the ROC to have their non-management directors meet at regularly scheduled executive sessions without management.
Nominating/Corporate governance committee
Listed companies must have a nominating/corporate governance committee composed entirely of independent directors and governed by a written charter that provides for certain responsibilities of the committee set out in the NYSE listing standards.

We do not have a nominating/corporate governance committee. The ROC Company Law does not require companies incorporated in the ROC to have a nominating/corporate governance committee. Currently, our board of directors performs the duties of a corporate governance committee and regularly reviews our corporate governance principles and practices.

 

The ROC Company Law requires that directors be elected by shareholders. Under ROC law and regulations, companies that have independent directors are required to adopt a candidate nomination system for the election of independent directors. Our three independent directors were elected through the candidate nomination system provided in our Articles of Incorporation. All of our non-independent directors were elected directly by our shareholders at our shareholders meetings without a nomination process. 

Compensation committee
Listed companies must have a compensation committee composed entirely of independent directors and governed by a written charter that provides for certain responsibilities of the committee set out in the NYSE listing standards. We established a compensation committee on September 29, 2011 as required by the regulations promulgated by the FSC in March 2011. The charter of such committee contains similar responsibilities as those provided under NYSE listing standards.
In addition to any requirement of Rule 10A-3(b)(1), all compensation committee members must satisfy the independence requirements for independent directors set out in the NYSE listing standards. We do not assess the independence of our compensation committee member under the independence requirements of the NYSE listing standards but adopt the independence standard as promulgated under the ROC Regulations Governing the Appointment and Exercise of Powers by the Remuneration Committee of a Company Whose Stock is Listed on the Stock Exchange or Traded Over the Counter.
Audit committee
Listed companies must have an audit committee that satisfies the requirements of Rule 10A-3 under the Exchange Act. We have an audit committee that satisfies the requirements of Rule 10A-3 under the Exchange Act and the requirements under ROC Securities and Exchange Act.

 

113

New York Stock Exchange Corporate Governance
Rules Applicable to U.S. Companies

Description of Significant Differences between Our Governance Practices and the NYSE Corporate Governance Rules Applicable to U.S. Companies

The audit committee must have a minimum of three members. In addition to any requirement of Rule 10A-3(b)(1), all audit committee members must satisfy the independence requirements for independent directors set out in the NYSE listing standards. We currently have three members on our audit committee. Our audit committee members satisfy the independence requirements of Rule 10A-3 under the Exchange Act. We do not assess the independence of our audit committee member under the independence requirements of the NYSE listing standards.
The audit committee must have a written charter that provides for the duties and responsibilities set out in Rule 10A-3 and addresses certain other matters required by the NYSE listing standards.

Our audit committee charter provides for the audit committee to assist our board of directors in its oversight of (i) the integrity of our financial statements, (ii) the qualifications, independence and performance of our independent auditor and (iii) our compliance with legal and regulatory requirements and provides for the duties and responsibilities set out in Rule 10A-3. Our audit committee charter does not address all the matters required by the NYSE listing standards beyond the requirements of Rule 10A-3.

 

Because the appointment and retention of our independent auditor are the responsibility of our entire board of directors under ROC law and regulations, our audit committee charter provides that the audit committee shall make recommendations to the board of directors with respect to these matters. 

Each listed company must have an internal audit function. We have an internal audit function. Under the ROC Regulations for the Establishment of Internal Control Systems by Public Companies, a public company is required to set out its internal control systems in writing, including internal audit implementation rules, which must be approved by the board of directors. Our entire board of directors and the Chief Executive Officer are responsible for the establishment of the internal audit functions, compliance with the internal audit implementation rules and oversight of our internal control systems, including the appointment and retention of our independent auditor.

 

114

New York Stock Exchange Corporate Governance
Rules Applicable to U.S. Companies

Description of Significant Differences between Our Governance Practices and the NYSE Corporate Governance Rules Applicable to U.S. Companies

Equity compensation plans
Shareholders must be given the opportunity to vote on all equity compensation plans and material revisions thereto, except for employment inducement awards, certain grants, plans and amendments in the context of mergers and acquisitions, and certain specific types of plans. Shareholders’ approval is required for the distribution of employee bonuses under our Articles of Incorporation, while the board of directors has authority under ROC laws and regulations to approve employee stock option plans by a majority vote of the board of directors at a meeting where at least two-thirds of all directors are present and to grant options to employees pursuant to such plans provided that shareholders’ approval is required if the exercise price of an option would be less than the closing price of the common shares on the Taiwan Stock Exchange on the grant date of the option, subject to the approval of the Securities and Futures Bureau of the FSC, and to approve treasury stock programs and the transfer of shares to employees under such programs by a majority vote of the board of directors in a meeting where at least two-thirds of all directors are present.
Corporate governance guidelines
Listed companies must adopt and disclose corporate governance guidelines. We currently comply with the domestic non-binding Corporate Governance Best-Practice Principles for Taiwan Stock Exchange and Taipei Exchange Listed Companies promulgated by the Taiwan Stock Exchange and the Taipei Exchange, and we provide an explanation of the differences between our practice and the principles, if any, in our ROC annual report.
Code of ethics for directors, officers and employees
Listed companies must adopt and disclose a code of business conduct and ethics for directors, officers and employees, and promptly disclose any waivers of the code for directors or executive officers. We have adopted a code of ethics that satisfies the requirements of Item 16B of Form 20-F and applies to all employees, officers, supervisors and directors of our company and our subsidiaries and will disclose any waivers of the code as required by Item 16B of Form 20-F. We have posted our code of ethics on our website.
Description of significant differences
Listed foreign private issuers must disclose any significant ways in which their corporate governance practices differ from those followed by domestic companies under NYSE listing standards. This table contains the significant differences between our corporate governance practices and those required of U.S. companies under the NYSE listing standards.

 

115

New York Stock Exchange Corporate Governance
Rules Applicable to U.S. Companies

Description of Significant Differences between Our Governance Practices and the NYSE Corporate Governance Rules Applicable to U.S. Companies

CEO certification
Each listed company CEO must certify to the NYSE each year that he or she is not aware of any violation by the company of NYSE corporate governance listing standards, qualifying the certification to the extent necessary. As a foreign private issuer, we are not required to comply with this rule; however, our Chief Executive Officer provides certifications under Sections 302 and 906 of the Sarbanes-Oxley Act.
Each listed company CEO must promptly notify the NYSE in writing after any executive officer of the listed company becomes aware of any material non-compliance with any applicable provisions of Section 303A. We intend to comply with this requirement.
Each listed company must submit an executed Written Affirmation annually to the NYSE. In addition, each listed company must submit an interim Written Affirmation each time a change occurs to the board or any of the committees subject to Section 303A. The annual and interim Written Affirmations must be in the form specified by the NYSE. We have complied with this requirement to date and intend to continue to comply going forward.
Website
Listed companies must have and maintain a publicly accessible website. We have and maintain a publicly accessible website.

 

 Item 16H. Mine Safety Disclosure

 

Not applicable.

 

116

PART III

 

Item 17. Financial Statements

 

The Company has elected to provide financial statements for fiscal year 2015 and the related information pursuant to Item 18.

 

Item 18. Financial Statements

 

Reference is made to pages F-1 to F-94 of this annual report.

 

The consolidated financial statements of the Company and the report thereon by its independent registered public accounting firm listed below are attached hereto as follows:

 

(a) Report of Independent Registered Public Accounting Firm of the Company dated April 28, 2016
(page F-1).

 

(b) Consolidated Balance Sheets of the Company and subsidiaries as of December 31, 2014 and 2015 (page F-2 to F-3).

 

(c) Consolidated Statements of Comprehensive Income of the Company and subsidiaries for the years ended December 31, 2013, 2014 and 2015 (page F-4 to F-5).

 

(d) Consolidated Statements of Changes in Equity of the Company and subsidiaries for the years ended December 31, 2013, 2014 and 2015 (page F-6 to F-7).

 

(e) Consolidated Statements of Cash Flows of the Company and subsidiaries for the years ended December 31, 2013, 2014 and 2015 (pages F-8 to F-9).

 

(f) Notes to Consolidated Financial Statements of the Company and subsidiaries (pages F-10 to F-94).

 

Item 19. E x hibits

 

1. Articles of Incorporation of the Registrant (English translation of Chinese).

 

2. (a) Amended and Restated Deposit Agreement dated as of September 29, 2000 among ASE Inc., Citibank N.A., as depositary, and Holders and Beneficial Holders of American Depositary Shares evidenced by American Depositary Receipts issued thereunder, including the form of American Depositary Receipt (incorporated by reference to Exhibit (a) to our registration statement on Form F-6 (File No. 333-108834) filed on September 16, 2003).

 

(b) Letter Agreement dated as of February 1, 2001 by and between ASE Inc. and Citibank N.A., as depositary for the sole purpose of accommodating the surrender of ASE Inc.’s Rule 144A Global Depositary Shares, the issuance of American Depositary Shares and the delivery of American Depositary Receipts in the context of the termination of ASE Inc.’s Rule 144A Depositary Receipts Facility (incorporated by reference to Exhibit (b)(i) to our registration statement on Post-Effective Amendment No. 1 to Form F-6 (File No. 333-108834) filed on April 3, 2006).

 

(c) Letter Agreement dated as of September 25, 2003 by and between ASE Inc. and Citibank N.A., as depositary for the sole purpose of accommodating the issuance of American Depositary Shares upon ASE Inc.’s deposit of its shares with the depositary following the conversion of certain bonds issued by ASE Inc. in accordance with, and subject to, the terms and conditions of the indenture governing such bonds (incorporated by reference to Exhibit (b)(ii) to our registration statement on Post-Effective Amendment No. 1 to Form F-6 (File No. 333-108834) filed on April 3, 2006).

 

(d) Amendment No. 1 to Amended and Restated Deposit Agreement dated as of April 6, 2006 among ASE Inc., Citibank N.A., as depositary, and Holders and Beneficial Holders of American Depositary Shares evidenced by American Depositary Receipts issued thereunder, including the form of American Depositary Receipt (incorporated by reference to Exhibit (a)(ii) to our registration statement on Post-Effective Amendment No. 2 to Form F-6 (File No. 333-108834) filed on October 25, 2006).

 

117

(e) Form of Amendment No. 2 to Amended and Restated Deposit Agreement among ASE Inc., Citibank N.A., as depositary, and Holders and Beneficial Holders of American Depositary Shares evidenced by American Depositary Receipts issued thereunder, including the form of American Depositary Receipt (incorporated by reference to Exhibit (a)(iii) to our registration statement on Post-Effective Amendment No. 2 to Form F-6 (File No. 333-108834) filed on October 25, 2006).

 

4. (a) Asset Purchase Agreement dated as of July 3, 1999 among ASE (Chung Li) Inc., ASE Inc., Motorola Electronics Taiwan, Ltd. and Motorola, Inc. (incorporated by reference to Exhibit 10.2 to ASE Test’s registration statement on Form F-3 (File No. 333-10892) filed on September 27, 1999 (the “ASE Test 1999 Form-3”)).

 

(b) Agreement dated as of June 5, 2002 among ASE (Chung Li) Inc., ASE Inc., Motorola Electronics Taiwan, Ltd. and Motorola, Inc. amending certain earn-out arrangements provided for in Section 2.09(b)(ii)(D) of the Asset Purchase Agreement dated as of July 3, 1999 among the same parties (incorporated by reference to Exhibit 4(b) to our annual report on Form 20-F (File No. 001-16125) for the year ended December 31, 2002 filed on June 30, 2003).

 

(c) Stock Purchase Agreement dated as of July 3, 1999 among ASE Investment (Labuan) Inc., ASE Inc., Motorola Asia Ltd. and Motorola, Inc. relating to the purchase and sale of 100.0% of the common stock of Motorola Korea Ltd. (incorporated by reference to Exhibit 10.3 to the ASE Test 1999 Form F-3).

 

(d)† BGA Immunity Agreement dated as of January 25, 1994 between ASE Inc. and Motorola, Inc. (incorporated by reference to Exhibit 10.6 to the Form F-1).

 

(e)† Amendment dated March 18, 2003 renewing the BGA Immunity Agreement dated as of January 25, 1994 between ASE Inc. and Motorola, Inc. (incorporated by reference to Exhibit 4(g) to our annual report on Form 20-F (File No. 001-16125) for the year ended December 31, 2003 filed on June 30, 2004).

 

(f) Consent dated June 10, 2004 to the Assignment of the BGA Immunity Agreement between ASE Inc. and Motorola, Inc. dated January 25, 1994 (incorporated by reference to Exhibit 4(h) to our annual report on Form 20-F (File No. 001-16125) for the year ended December 31, 2003 filed on June 30, 2004).

 

(g) Asset Purchase Agreement by and among Flextronics Manufacturing (M) Sdn Bhd, as Buyer, ASE Electronics (M) Sdn. Bhd. as Company, dated as of October 3, 2005 (incorporated by reference to Exhibit 4(g) to our annual report on Form 20-F (File No. 001-16125) for the year ended December 31, 2005 filed on June 19, 2006).

 

(h) Joint Venture Agreement dated as of July 14, 2006 among Advanced Semiconductor Engineering, Inc. and Powerchip Semiconductor Corp. relating to the establishment of, and our investment of 60.0% in, PowerASE (incorporated by reference to Exhibit 4(r) to our annual report on Form 20-F (File No. 001-16125) for the year ended December 31, 2006 filed on June 25, 2007, as amended).

 

(i) Sale and Purchase Agreement dated January 11, 2007 among J&R Holding Limited and Seacoast Profits Limited relating to our acquisition of 100% of GAPT (incorporated by reference to Exhibit 4(s) to our annual report on Form 20-F (File No. 001-16125) for the year ended December 31, 2006 filed on June 25, 2007, as amended).

 

(j) Equity Interests Transfer Agreement dated August 6, 2007 by and among NXP B.V., NXP Semiconductors Suzhou Ltd. and J&R Holding Limited relating to our acquisition of 60% of ASEN, our joint venture with NXP Semiconductors (incorporated by reference to Exhibit 4(j) to our annual report on Form 20-F (File No. 001-16125) for the year ended December 31, 2008 filed on June 24, 2009).

 

(k) Scheme Implementation Agreement dated September 4, 2007 between Advanced Semiconductor Engineering, Inc. and ASE Test Limited relating to our acquisition of all the outstanding ordinary shares of, and the privatization of, ASE Test (incorporated by reference to Appendix A to Exhibit (a)(1) to Schedule 13E-3 (File No. 005-55723) filed by ASE Test on January 4, 2008).

 

118

(l) Syndicated Loan Agreement in the amount of NT$24,750 million dated March 3, 2008 among Advanced Semiconductor Engineering, Inc., Citibank, N.A., Taipei Branch and the banks and banking institutions listed on Schedule I thereto relating to our acquisition of all the outstanding ordinary shares of, and the privatization of, ASE Test (incorporated by reference to Exhibit 4(l) to our annual report on Form 20-F (File No. 001-16125) for the year ended December 31, 2008 filed on June 24, 2009).

 

(m) Equity Purchase Agreement dated March 17, 2008 between Aimhigh Global Corp., TCC Steel and J&R Holding Limited in respect of Weihai Aimhigh Electronic Co. Ltd. relating to our acquisition of 100% of ASE (Weihai), Inc. (incorporated by reference to Exhibit 4(m) to our annual report on Form 20-F (File No. 001-16125) for the year ended December 31, 2008 filed on June 24, 2009).

 

(n) Syndicated Loan Agreement in the amount of US$200 million dated May 29, 2008 among Advanced Semiconductor Engineering, Inc., Citibank, N.A., Taipei Branch and the banks and banking institutions listed on Schedule I thereto relating to our acquisition of all the outstanding ordinary shares of, and the privatization of, ASE Test (incorporated by reference to Exhibit 4(n) to our annual report on Form 20-F (File No. 001-16125) for the year ended December 31, 2008 filed on June 24, 2009).

 

(o) Equity Purchase Agreement dated October 25, 2011 between PowerASE Technology, Inc. and certain shareholders of Lu-Chu Development Corporation relating to our acquisition of 72.97% of all the outstanding ordinary shares of Lu-Chu Development Corporation (incorporated by reference to Exhibit 4(o) to our annual report on Form 20-F (File No. 001-16125) for the year ended December 31, 2011 filed on April 20, 2012).

 

(p) Equity Purchase Agreement dated October 25, 2011 between PowerASE Technology, Inc. and shareholders of Lu-Chu Development Corporation listed on Schedule I thereto relating to our acquisition of 9.3% of all the outstanding ordinary shares of Lu-Chu Development Corporation (incorporated by reference to Exhibit 4(p) to our annual report on Form 20-F (File No. 001-16125) for the year ended December 31, 2011 filed on April 20, 2012).

 

(q) Equity Purchase Agreement dated November 17, 2011 between ASE Assembly & Test (Shanghai) Limited and Kunshan Ding Yao Real Estate Development Co., Ltd. relating to our acquisition of 10% equity of Shanghai Ding Hui Real Estate Development Co., Ltd. (incorporated by reference to Exhibit 4(q) to our annual report on Form 20-F (File No. 001-16125) for the year ended December 31, 2011 filed on April 20, 2012).

 

(r) Equity Purchase Agreement dated January 13, 2012 between Advanced Semiconductor Engineering, Inc. and shareholders of Yang Ting Tech Co., Ltd. listed on Schedule I thereto relating to our acquisition of 61.63% of all the outstanding ordinary shares of Yang Ting Tech Co., Ltd. (incorporated by reference to Exhibit 4(r) to our annual report on Form 20-F (File No. 001-16125) for the year ended December 31, 2011 filed on April 20, 2012).

 

(s) Equity Purchase Agreement dated January 13, 2012 between Advanced Semiconductor Engineering, Inc. and shareholders of Yang Ting Tech Co., Ltd. listed on Schedule I thereto relating to our acquisition of 38.37% of all the outstanding ordinary shares of Yang Ting Tech Co., Ltd. (incorporated by reference to Exhibit 4(s) to our annual report on Form 20-F (File No. 001-16125) for the year ended December 31, 2011 filed on April 20, 2012).

 

8. List of Subsidiaries

 

12. (a) Certification of Jason C.S. Chang, required by Rule 13a-14(a) of the Exchange Act.

 

(b) Certification of Joseph Tung, required by Rule 13a-14(a) of the Exchange Act.

 

13. Certification of the Chief Executive Officer and the Chief Financial Officer of Advanced Semiconductor Engineering, Inc. required by Rule 13a-14(b) of the Exchange Act and Section 1350 of Chapter 63 of Title 18 of the United States Code.

 

15. (a) Consent of Deloitte & Touche.

___________________

Does not contain portions for which confidential treatment has been granted.

 

The Company agrees to furnish to the SEC upon request a copy of any instrument which defines the rights of holders of long-term debt of the Company and its consolidated subsidiaries.

 

119

Signatures

 

The registrant hereby certifies that it meets all of the requirements for filing on Form 20-F and that it has duly caused and authorized the undersigned to sign this annual report on its behalf.

 

ADVANCED SEMICONDUCTOR ENGINEERING, INC.
 
 
By: /s/Joseph Tung
Name: Joseph Tung
Title: Chief Financial Officer

Date: April 29, 2016

 

120

INDEX TO CONSOLIDATED FINANCIAL STATEMENTS

 

 

Page

Consolidated Financial Statements of Advanced Semiconductor Engineering, Inc. and Subsidiaries  
Independent Registered Public Accounting Firm’s Report F-1
Consolidated Balance Sheets F-2
Consolidated Statements of Comprehensive Income F-4
Consolidated Statements of Changes in Equity F-6
Consolidated Statements of Cash Flows F-8
Notes to Consolidated Financial Statements F-10

 

 

 

 

 

 

 

Advanced Semiconductor Engineering,
Inc. and Subsidiaries

Consolidated Financial Statements as of
December 31, 2014 and 2015 and for the
Years Ended December 31, 2013, 2014 and 2015 and
Report of Independent Registered Public Accounting Firm

 

 

 

 

 

 

 

 

 

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

 

To the Board of Directors and Shareholders of

Advanced Semiconductor Engineering, Inc.

 

We have audited the accompanying consolidated balance sheets of Advanced Semiconductor Engineering, Inc. (a corporation incorporated under the laws of the Republic of China) and its subsidiaries (collectively, the “Group”) as of December 31, 2014 and 2015, and the related consolidated statements of comprehensive income, changes in equity and cash flows for each of the three years in the period ended December 31, 2015, all expressed in New Taiwan dollars. These consolidated financial statements are the responsibility of the Group’s management. Our responsibility is to express an opinion on these consolidated financial statements based on our audits.

 

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the consolidated financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the consolidated financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall consolidated financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

 

In our opinion, such consolidated financial statements present fairly, in all material respects, the financial position of the Group as of December 31, 2014 and 2015, and the results of their operations and their cash flows for each of the three years in the period ended December 31, 2015, in conformity with International Financial Reporting Standards as issued by the International Accounting Standards Board.

 

Our audits also comprehended the translation of New Taiwan dollar amounts into U.S. dollar amounts and, in our opinion, such translation has been made in conformity with the basis stated in Note 4 to the consolidated financial statements. Such U.S. dollar amounts are presented solely for the convenience of the readers.

 

We have also audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the Group’s internal control over financial reporting as of December 31, 2015, based on the criteria established in Internal Control - Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission and our report dated April 28, 2016 expressed an unqualified opinion on the Group’s internal control over financial reporting.

 

 

 

 

/s/Deloitte & Touche

Taipei, Taiwan

Republic of China

 

 

April 28, 2016

 

F- 1

ADVANCED SEMICONDUCTOR ENGINEERING, INC. AND SUBSIDIARIES

 

CONSOLIDATED BALANCE SHEETS

(Amounts in Thousands)

 

    December 31,   December 31,
    2014   2015
ASSETS   NT$   NT$   US$ (Note 4)
             
CURRENT ASSETS            
Cash and cash equivalents (Notes 4 and 6)   $ 51,694,410     $ 55,251,181     $ 1,685,001  
Financial assets at fair value through profit or loss -                        
   current (Notes 4, 5 and 7)     4,988,843       3,833,701       116,917  
Available-for-sale financial assets - current (Notes 4                        
   and 8)     1,533,265       30,344       925  
Trade receivables, net (Notes 4 and 9)     52,920,810       44,931,487       1,370,280  
Other receivables (Note 4)     537,122       429,541       13,100  
Current tax assets (Notes 4 and 23)     65,312       168,717       5,145  
Inventories (Notes 4, 5 and 10)     20,163,093       23,258,279       709,310  
Inventories related to real estate business (Notes 4, 5,                        
   11, 22 and 33)     23,986,478       25,713,538       784,188  
Other financial assets - current (Notes 4 and 33)     638,592       301,999       9,210  
Other current assets     3,427,265       2,814,053       85,821  
                         
Total current assets     159,955,190       156,732,840       4,779,897  
                         
NON-CURRENT ASSETS                        
Available-for-sale financial assets - non-current                        
    (Notes 4 and 8)     941,105       924,362       28,190  
Investments accounted for using the equity                        
   method (Notes 4 and 12)     1,468,242       37,403,601       1,140,701  
Property, plant and equipment (Notes 4, 5, 13, 22,                        
    32 and 34)     151,587,115       149,997,075       4,574,476  
Goodwill (Notes 4, 5 and 14)     10,445,415       10,506,519       320,418  
Other intangible assets (Notes 4, 5, 15 and 22)     1,467,871       1,382,093       42,150  
Deferred tax assets (Notes 4, 5 and 23)     4,265,220       5,156,515       157,259  
Other financial assets - non-current (Notes 4 and 33)     367,345       345,672       10,542  
Long-term prepayments for lease (Note 16)     2,585,964       2,556,156       77,956  
Other non-current assets     635,350       263,416       8,034  
                         
Total non-current assets     173,763,627       208,535,409       6,359,726  
                         
TOTAL   $ 333,718,817     $ 365,268,249     $ 11,139,623  

 

(Continued)

 

F- 2

ADVANCED SEMICONDUCTOR ENGINEERING, INC. AND SUBSIDIARIES

 

CONSOLIDATED BALANCE SHEETS

(Amounts in Thousands)

 

    December 31,   December 31,
    2014   2015
LIABILITIES AND EQUITY   NT$   NT$   US$ (Note 4)
             
CURRENT LIABILITIES            
Short-term borrowings (Note 17)   $ 41,176,033     $ 32,635,321     $ 995,283  
Short-term bills payable (Note 17)     -       4,348,054       132,603  
Financial liabilities at fair value through profit or                        
   loss -  current (Notes 4, 5 and 7)     2,651,352       3,005,726       91,666  
Trade payables     35,411,281       34,138,564       1,041,128  
Other payables (Note 19)     22,364,516       19,194,818       585,386  
Current tax liabilities (Notes 4 and 23)     6,630,696       6,746,022       205,734  
Advance real estate receipts (Note 4)     480,325       2,703,706       82,455  
Current portion of bonds payable (Notes 4 and 18)     -       14,685,866       447,876  
Current portion of long-term borrowings (Notes 17                        
    and 33)     2,831,007       2,057,465       62,747  
Other current liabilities     2,134,917       3,180,767       97,004  
                         
Total current liabilities     113,680,127       122,696,309       3,741,882  
                         
NON-CURRENT LIABILITIES                        
Bonds payable (Notes 4 and 18)     31,270,131       23,740,384       724,013  
Long-term borrowings (Notes 17 and 33)     24,104,424       42,493,668       1,295,934  
Deferred tax liabilities (Notes 4, 5 and 23)     3,932,819       4,987,549       152,106  
Net defined benefit liabilities (Notes 4, 5 and 20)     4,382,530       4,072,493       124,199  
Other non-current liabilities     657,392       1,071,509       32,677  
                         
Total non-current liabilities     64,347,296       76,365,603       2,328,929  
                         
Total liabilities     178,027,423       199,061,912       6,070,811  
                         
EQUITY ATTRIBUTABLE TO OWNERS OF THE                        
COMPANY (Notes 4 and 21)                        
Share capital     78,715,179       79,185,660       2,414,934  
Capital surplus     16,013,980       23,758,550       724,567  
Retained earnings                        
Legal reserve     10,289,878       12,649,145       385,762  
Special reserve     3,353,938       3,353,938       102,285  
Unappropriated earnings     36,000,026       37,978,222       1,158,226  
Total retained earnings     49,643,842       53,981,305       1,646,273  
Other equity     5,067,640       5,080,790       154,949  
Treasury shares     (1,959,107 )     (7,292,513 )     (222,401 )
                         
Equity attributable to owners of the Company     147,481,534       154,713,792       4,718,322  
                         
NON-CONTROLLING INTERESTS (Notes 4 and 21)     8,209,860       11,492,545       350,490  
                         
Total equity     155,691,394       166,206,337       5,068,812  
                         
TOTAL   $ 333,718,817     $ 365,268,249     $ 11,139,623  

 

 

The accompanying notes are an integral part of the consolidated financial statements. (Concluded)

 

 

F- 3

ADVANCED SEMICONDUCTOR ENGINEERING, INC. AND SUBSIDIARIES

 

CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME

(Amounts in Thousands Except Earnings Per Share)

 

    For the Years Ended December 31
    2013   2014   2015
    NT$   NT$   NT$   US$ (Note 4)
                 
OPERATING REVENUES (Note 4)   $ 219,862,446     $ 256,591,447     $ 283,302,536     $ 8,639,906  
                                 
OPERATING COSTS (Notes 10, 20                                
and 22)     177,040,435       203,002,918       233,167,308       7,110,927  
                                 
GROSS PROFIT     42,822,011       53,588,529       50,135,228       1,528,979  
                                 
OPERATING EXPENSES (Notes 20                                
and 22)                                
Selling and marketing expenses     2,982,789       3,438,166       3,588,472       109,438  
General and administrative expenses     8,712,862       10,214,810       10,724,568       327,068  
Research and development expenses     9,064,712       10,289,684       10,937,566       333,564  
                                 
Total operating expenses     20,760,363       23,942,660       25,250,606       770,070  
                                 
OTHER OPERATING INCOME AND                                
EXPENSES, NET (Note 22)     (1,348,246 )     228,615       (251,529 )     (7,671 )
                                 
PROFIT FROM OPERATIONS     20,713,402       29,874,484       24,633,093       751,238  
                                 
NON-OPERATING INCOME AND                                
EXPENSES                                
Other income (Note 22)     493,884       529,251       815,778       24,879  
Other gains and losses (Note 22)     447,886       607,299       1,748,795       53,333  
Finance costs (Note 22)     (2,307,455 )     (2,354,097 )     (2,312,143 )     (70,514 )
Share of the profit or loss                                
of associates (Note 4)     22,039       (121,882 )     407,622       12,431  
                                 
Total non-operating income and                                
expenses     (1,343,646 )     (1,339,429 )     660,052       20,129  
                                 
PROFIT BEFORE INCOME TAX     19,369,756       28,535,055       25,293,145       771,367  
                                 
INCOME TAX EXPENSE (Notes 4, 5                                
and 23)     3,499,595       5,665,954       4,311,073       131,475  
                                 
PROFIT FOR THE YEAR     15,870,161       22,869,101       20,982,072       639,892  
                                 
OTHER COMPREHENSIVE INCOME                                
(LOSS)                                
Items that will not be reclassified                                
subsequently to profit or loss:                                
Remeasurement of defined benefit                                
obligation     412,225       (28,145 )     (62,911 )     (1,919 )
Share of other comprehensive                                
loss of associates     -       (1,031 )     (37,748 )     (1,151 )

 

(Continued)

 

F- 4

ADVANCED SEMICONDUCTOR ENGINEERING, INC. AND SUBSIDIARIES

 

CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME

(Amounts in Thousands Except Earnings Per Share)

 

    For the Years Ended December 31
    2013   2014   2015
    NT$   NT$   NT$   US$ (Note 4)
Income tax relating to items that will                
not be reclassified subsequently   $ (66,706 )   $ 23,885     $ 11,002     $ 336  
      345,519       (5,291 )     (89,657 )     (2,734 )
                                 
Items that may be reclassified                                
subsequently to profit or loss:                                
Exchange differences on translating                                
foreign operations     2,817,268       5,405,008       (63,509 )     (1,937 )
Unrealized gain (loss) on available-                                
for-sale  financial assets     14,839       (133,714 )     10,451       319  
Cash flow hedges     1,245       3,279       -       -  
Share of other comprehensive                                
income (loss) of associates     55,183       235,156       (4,832 )     (147 )
Income tax relating to items that may                                
be reclassified subsequently     (769 )     -       -       -  
      2,887,766       5,509,729       (57,890 )     (1,765 )
                                 
Other comprehensive income (loss)                                
for the year, net of income tax     3,233,285       5,504,438       (147,547 )     (4,499 )
                                 
TOTAL COMPREHENSIVE INCOME                                
FOR THE YEAR   $ 19,103,446     $ 28,373,539     $ 20,834,525     $ 635,393  
                                 
PROFIT FOR THE YEAR                                
ATTRIBUTABLE TO:                                
Owners of the Company   $ 15,404,505     $ 22,228,602     $ 20,013,505     $ 610,354  
Non-controlling interests     465,656       640,499       968,567       29,538  
                                 
    $ 15,870,161     $ 22,869,101     $ 20,982,072     $ 639,892  
                                 
TOTAL COMPREHENSIVE INCOME                                
FOR THE YEAR ATTRIBUTABLE TO:                                
Owners of the Company   $ 18,509,604     $ 27,394,362     $ 19,940,438     $ 608,127  
Non-controlling interests     593,842       979,177       894,087       27,267  
                                 
    $ 19,103,446     $ 28,373,539     $ 20,834,525     $ 635,394  
                                 
EARNINGS PER SHARE (Note 24)                                
Basic   $ 2.05     $ 2.89     $ 2.62     $ 0.08  
Diluted   $ 1.99     $ 2.79     $ 2.51     $ 0.08  
                                 
EARNINGS PER AMERICAN                                
DEPOSITARY SHARE (“ADS”)                                
Basic   $ 10.26     $ 14.46     $ 13.08     $ 0.40  
Diluted   $ 9.96     $ 13.93     $ 12.55     $ 0.38  

 

The accompanying notes are an integral part of the consolidated financial statements. (Concluded)

 

 

F- 5

ADVANCED SEMICONDUCTOR ENGINEERING, INC. AND SUBSIDIARIES

 

CONSOLIDATED STATEMENTS OF CHANGES IN EQUITY

(Amounts in Thousands)

 

  Equity Attributable to Owners of the Company    
                              Accumulated Other Comprehensive Income                  
  Share Capital       Retained Earnings    Exchange
Differences
on
 

Unrealized

Gain on

Available-

                         
 

Shares

(In Thousands)

  Amounts  

Capital

Surplus

 

Legal

Reserve

 

Special

Reserve

 

Unappro-

priated
Earnings

  Total  

Translating
Foreign
Operations

 

-for-sale

Financial

Assets

 

Cash Flow

Hedges

  Total  

Treasury

Shares

  Total  

Non--

controlling

Interests

  Total Equity  
BALANCE AT JANUARY 1, 2013   7,602,292   $ 76,047,667   $ 5,274,634   $ 7,411,835   $ -   $ 22,398,409   $ 29,810,244   $ (3,210,248 ) $ 355,254   $ (3,755 ) $ (2,858,749 ) $ (1,959,107 ) $ 106,314,689   $ 3,505,743   $ 109,820,432  
Special reserve under Rule No. 1010012865 issued by the Financial Supervisory Commission (Note 21)   -     -     -     -     3,353,938     (3,353,938 )   -     -     -     -     -     -     -     -     -  
Profit for the year ended December 31, 2013   -     -     -     -     -     15,404,505     15,404,505     -     -     -     -     -     15,404,505     465,656     15,870,161  
Other comprehensive income for the year ended December 31, 2013, net of income tax   -     -     -     -     -     348,904     348,904     2,684,727     70,992     476     2,756,195     -     3,105,099     128,186     3,233,285  
Total comprehensive income for the year ended December 31, 2013   -     -     -     -     -     15,753,409     15,753,409     2,684,727     70,992     476     2,756,195     -     18,509,604     593,842     19,103,446  
Issue of ordinary shares for cash (Note 21)   130,000     1,300,000     2,093,000     -     -     -     -     -     -     -     -     -     3,393,000     -     3,393,000  
Appropriation of 2012 earnings                                                                                          
Legal reserve   -     -     -     1,309,136     -     (1,309,136 )   -     -     -     -     -     -     -     -     -  
Special reserve   -     -     -     -     309,992     (309,992 )   -     -     -     -     -     -     -     -     -  
Cash dividends distributed by the Company   -     -     -     -     -     (7,987,974 )   (7,987,974 )   -     -     -     -     -     (7,987,974 )   -     (7,987,974 )
    -     -     -     1,309,136     309,992     (9,607,102 )   (7,987,974 )   -     -     -     -     -     (7,987,974 )   -     (7,987,974 )
Cash dividends distributed by subsidiaries   -     -     -     -     -     -     -     -     -     -     -     -     -     (99,597 )   (99,597 )
Issue of dividends received by subsidiaries from the Company   -     -     153,097     -     -     -     -     -     -     -     -     -     153,097     -     153,097  
Partial disposal of interests in subsidiaries and additional acquisition of partially-owned subsidiaries (Notes 21 and 27)   -     -     (330 )   -     -     -     -     -     -     -     -     -     (330 )   27,826     27,496  
Changes in capital surplus from investments in associates accounted for using the equity method   -     -     1,457     -     -     -     -     -     -     -     -     -     1,457     -     1,457  
Issue of ordinary shares under employee share options   55,535     832,591     399,517     -     -     -     -     -     -     -     -     -     1,232,108     100,547     1,332,655  
BALANCE AT DECEMBER 31, 2013   7,787,827     78,180,258     7,921,375     8,720,971     3,663,930     25,190,778     37,575,679     (525,521 )   426,246     (3,279 )   (102,554 )   (1,959,107 )   121,615,651     4,128,361     125,744,012  
Change in capital surplus from investments in associates accounted for using the equity method   -     -     26,884     -     -     -     -     -     -     -     -     -     26,884     -     26,884  
Profit for the year ended December 31,2014   -     -     -     -     -     22,228,602     22,228,602     -     -     -     -     -     22,228,602     640,499     22,869,101  
Other comprehensive income (loss) for the year ended December 31, 2014, net of income tax   -     -     -     -     -     (4,434 )   (4,434 )   5,066,383     100,532     3,279     5,170,194     -     5,165,760     338,678     5,504,438  
Total comprehensive income for the year ended December 31, 2014   -     -     -     -     -     22,224,168     22,224,168     5,066,383     100,532     3,279     5,170,194     -     27,394,362     979,177     28,373,539  
Appropriation of 2013 earnings                                                                                          
Legal reserve   -     -     -     1,568,907     -     (1,568,907 )   -     -     -     -     -     -     -     -     -  
Special reserve   -     -     -     -     (309,992 )   309,992     -     -     -     -     -     -     -     -     -  
Cash dividends distributed by the Company   -     -     -     -     -     (10,156,005 )   (10,156,005 )   -     -     -     -     -     (10,156,005 )   -     (10,156,005 )
    -     -     -     1,568,907     (309,992 )   (11,414,920 )   (10,156,005 )   -     -     -     -     -     (10,156,005 )   -     (10,156,005 )
Issue of dividends received by subsidiaries from the Company   -     -     188,790     -     -     -     -     -     -     -     -     -     188,790     -     188,790  
Partial disposal of interests in subsidiaries and additional acquisition of partially-owned subsidiaries (Notes 21 and 27)   -     -     6,876,866     -     -     -     -     -     -     -     -     -     6,876,866     3,067,712     9,944,578  

 

                                                                                                                                                                        (Continued)

 

F- 6

ADVANCED SEMICONDUCTOR ENGINEERING, INC. AND SUBSIDIARIES

 

CONSOLIDATED STATEMENTS OF CHANGES IN EQUITY

(Amounts in Thousands)

 

  Equity Attributable to Owners of the Company        
      Accumulated Other Comprehensive Income        
    Share Capital           Retained Earnings    

Exchange

Differences

on

   

Unrealized

Gain on

Available-

                                     
   

Shares
(In

Thousands)

    Amounts    

Capital

Surplus

   

Legal

Reserve

   

Special

Reserve

   

Unappro-

priated

Earnings

    Total    

Translating

Foreign

Operations

   

for-sale

Financial

Assets

   

Cash Flow

Hedges

    Total    

Treasury

Shares

    Total    

Non-

controlling

Interests

    Total Equity  
Issue of ordinary shares under employee share options   73,898   $ 534,921   $ 1,000,065   $ -   $ -   $ -   $ -   $ -   $ -   $ -   $ -   $ -   $ 1,534,986   $ 120,376   $ 1,655,362  
Cash dividends distributed by subsidiaries   -     -     -     -     -     -     -     -     -     -     -     -     -     (85,766 )   (85,766 )
BALANCE AT DECEMBER 31, 2014   7,861,725     78,715,179     16,013,980     10,289,878     3,353,938     36,000,026     49,643,842     4,540,862     526,778     -     5,067,640     (1,959,107 )   147,481,534     8,209,860     155,691,394  
Equity component of convertible bonds issued by the Company   -     -     214,022     -     -     -     -     -     -     -     -     -     214,022     -     214,022  
Change in capital surplus from investments in associates and joint ventures accounted for using the equity method   -     -     150     -     -     -     -     -     -     -     -     -     150     -     150  
Profit for the year ended December 31,2015   -     -     -     -     -     20,013,505     20,013,505     -     -     -     -     -     20,013,505     968,567     20,982,072  
Other comprehensive income (loss) for the year ended December 31, 2015, net of income tax   -     -     -     -     -     (86,217 )   (86,217 )   (48,191 )   61,341     -     13,150     -     (73,067 )   (74,480 )   (147,547 )
Total comprehensive income (loss) for the year ended December 31, 2015   -     -     -     -     -     19,927,288     19,927,288     (48,191 )   61,341     -     13,150     -     19,940,438     894,087     20,834,525  
Appropriation of 2014 earnings                                                                                          
Legal reserve   -     -     -     2,359,267     -     (2,359,267 )   -     -     -     -     -     -     -     -     -  
Cash dividends declared by the Company   -     -     -     -     -     (15,589,825 )   (15,589,825 )   -     -     -     -     -     (15,589,825 )   -     (15,589,825 )
    -     -     -     2,359,267     -     (17,949,092 )   (15,589,825 )   -     -     -     -     -     (15,589,825 )   -     (15,589,825 )
Acquisition of treasury shares   -     -     -     -     -     -     -     -     -     -     -     (5,333,406 )   (5,333,406 )   -     (5,333,406 )
Issue of dividends received by subsidiaries from the Company   -     -     292,351     -     -     -     -     -     -     -     -     -     292,351     -     292,351  
Partial disposal of interests in subsidiaries and additional acquisition of majority-owned subsidiaries (Notes 21 and 27)   -     -     7,197,510     -     -     -     -     -     -     -     -     -     7,197,510     1,712,836     8,910,346  
Changes in percentage of ownership interest in subsidiaries   -     -     (563,815 )   -     -     -     -     -     -     -     -     -     (563,815 )   563,815     -  
Issue of ordinary shares under employee share options   48,703     470,481     604,352     -     -     -     -     -     -     -     -     -     1,074,833     -     1,074,833  
Cash dividends distributed by subsidiaries   -     -     -     -     -     -     -     -     -     -     -     -     -     (232,148 )   (232,148 )
Additional non-controlling interest arising on issue of employee share options by subsidiaries   -     -     -     -     -     -     -     -     -     -     -     -     -     344,095     344,095  
BALANCE AT DECEMBER 31, 2015   7,910,428   $ 79,185,660   $ 23,758,550   $ 12,649,145   $ 3,353,938   $ 37,978,222   $ 53,981,305   $ 4,492,671   $ 588,119   $ -   $ 5,080,790   $ (7,292,513 ) $ 154,713,792   $ 11,492,545   $ 166,206,337  
US DOLLARS (Note 4)                                                                                          
BALANCE AT DECEMBER 31, 2015   7,910,428   $ 2,414,934   $ 724,567   $ 385,762   $ 102,285   $ 1,158,226   $ 1,646,273   $ 137,013   $ 17,936   $ -   $ 154,949   $ (222,401 ) $ 4,718,322   $ 350,490   $ 5,068,812  

 

 

The accompanying notes are an integral part of the consolidated financial statements. (Concluded)

 

F- 7

ADVANCED SEMICONDUCTOR ENGINEERING, INC. AND SUBSIDIARIES

 

CONSOLIDATED STATEMENTS OF CASH FLOWS

(Amounts in Thousands)

 

    For the Years Ended December 31
    2013   2014   2015
    NT$   NT$   NT$   US$ (Note 4)
                 
CASH FLOWS FROM OPERATING                
ACTIVITIES                
Profit before income tax   $ 19,369,756     $ 28,535,055     $ 25,293,145     $ 771,367  
Adjustments for:                                
Depreciation expense     24,696,607       25,805,042       28,938,770       882,549  
Amortization expense     774,304       545,734       579,894       17,685  
Net gains on fair value change of                                
financial assets and liabilities at fair                                
value through profit or loss     (795,359 )     (1,838,840 )     (2,472,835 )     (75,414 )
Interest expense     2,257,144       2,324,426       2,268,786       69,192  
Interest income     (212,801 )     (243,474 )     (242,084 )     (7,383 )
Dividend income     (131,449 )     (101,252 )     (396,973 )     (12,107 )
Compensation cost of employee share                                
options     260,801       110,157       133,496       4,071  
Share of loss (profit) of associates and                                
joint ventures     (22,039 )     121,882       (407,622 )     (12,431 )
Impairment loss recognized on                                
financial assets     196,325       28,421       8,232       251  
Impairment loss recognized on non-                                
financial assets     949,015       899,480       610,140       18,608  
(Reversal of) compensation cost for                                
the settlement of legal claims     894,150       (91,305 )     -       -  
Net loss on foreign currency exchange     300,175       1,404,234       1,358,777       41,439  
Others     151,065       404,443       1,411,599       43,050  
Changes in operating assets and                                
liabilities                                
Financial assets held for trading     1,122,280       823,313       4,162,522       126,945  
Trade receivables     (5,767,254 )     (9,703,070 )     7,982,736       243,450  
Other receivables     (6,540 )     (8,625 )     55,112       1,681  
Inventories     (3,241,115 )     (8,208,824 )     (5,128,726 )     (156,411 )
Other current assets     (108,425 )     102,353       407,017       12,413  
Financial liabilities held for trading     (1,011,975 )     (835,779 )     (1,725,606 )     (52,626 )
Trade payables     4,722,462       6,422,305       (1,272,717 )     (38,814 )
Other payables     1,068,223       3,045,452       (814,809 )     (24,849 )
Other current liabilities     2,796       703,764       2,545,312       77,625  
Other operating activities items     (191,631 )     (187,727 )     (247,024 )     (7,534 )
      45,276,515       50,057,165       63,047,142       1,922,757  
Interest received     182,164       233,457       253,289       7,725  
Dividend received     176,058       101,252       499,918       15,246  
Interest paid     (2,200,143 )     (2,065,244 )     (2,067,955 )     (63,067 )
Income tax paid     (2,138,639 )     (2,463,153 )     (4,184,089 )     (127,603 )
                                 
Net cash generated from operating                                
activities     41,295,955       45,863,477       57,548,305       1,755,058  
                                 
CASH FLOWS FROM INVESTING                                
ACTIVITIES                                
Purchase of financial assets designated                                
as at fair value through profit or loss     (53,135,894 )     (108,958,658 )     (100,842,813 )     (3,075,414 )
Proceeds on sale of financial assets                                
designated as at fair value through                                
profit or loss     55,032,536       109,825,159       102,139,161       3,114,948  
Purchase of available-for-sale financial                                
assets     (3,474,152 )     (3,565,428 )     (1,273,510 )     (38,838 )
Proceeds on sale of available-for-sale                                
financial assets     1,093,408       4,388,130       2,761,145       84,207  

 

(Continued)

 

F- 8

ADVANCED SEMICONDUCTOR ENGINEERING, INC. AND SUBSIDIARIES

 

CONSOLIDATED STATEMENTS OF CASH FLOWS

(Amounts in Thousands)

  

    For the Years Ended December 31
    2013   2014   2015
    NT$   NT$   NT$   US$ (Note 4)
                 
Cash received from return of capital by                
available-for-sale financial assets   $ 27,368     $ 20,411     $ 44,511     $ 1,357  
Purchase of held-to-maturity financial                                
assets     (88,169 )     -       -       -  
Proceeds on sale of held-to-maturity financial                                
assets     73,716       -       -       -  
Acquisition of associates and joint                                
ventures     -       (100,000 )     (35,673,097 )     (1,087,926 )
Net cash outflow on acquisition of                                
subsidiaries     (250,387 )     -       -       -  
Payments for property, plant and                                
equipment     (29,142,719 )     (39,598,964 )     (30,280,124 )     (923,456 )
Proceeds from disposal of property,                                
plant and equipment     351,546       421,207       243,031       7,412  
Payments for intangible assets     (313,110 )     (396,466 )     (491,135 )     (14,978 )
Decrease (increase) in other financial assets     4,513       (372,569 )     358,266       10,926  
Increase in other non-current assets     (104,499 )     (480,711 )     (336,864 )     (10,273 )
                                 
Net cash used in investing activities     (29,925,843 )     (38,817,889 )     (63,351,429 )     (1,932,035 )
                                 
CASH FLOWS FROM FINANCING                                
ACTIVITIES                                
Net proceeds from (repayment of) short-                                
term borrowings     7,051,874       (3,442,162 )     (8,532,792 )     (260,225 )
Net proceeds from short-term bills payable     -       -       4,348,054       132,603  
Proceeds from issue of bonds     11,900,051       8,888,562       6,136,425       187,143  
Repayment of bonds payable     -       (729,790 )     -       -  
Proceeds from long-term borrowings     28,715,694       32,030,868       39,887,570       1,216,455  
Repayment of long-term borrowings     (31,382,333 )     (40,978,403 )     (22,926,660 )     (699,197 )
Dividends paid     (7,834,877 )     (9,967,215 )     (15,297,474 )     (466,529 )
Proceeds from issue of ordinary shares     3,393,000       -       -       -  
Proceeds from exercise of employee                                
share options     1,071,854       1,498,343       1,285,102       39,192  
Payments for acquisition of treasury                                
shares     -       -       (5,333,406 )     (162,653 )
Proceeds from partial disposal of                                
interests in subsidiaries     -       9,991,439       8,910,346       271,740  
Decrease in non-controlling interests     (72,101 )     (85,766 )     (232,148 )     (7,080 )
Other financing activities items     (48,291 )     (2,879 )     391,322       11,934  
                                 
Net cash generated from (used in)                                
financing activities     12,794,871       (2,797,003 )     8,636,339       263,383  
                                 
EFFECTS OF EXCHANGE RATE                                
CHANGES ON THE BALANCE OF                                
CASH AND CASH EQUIVALENTS                                
HELD IN FOREIGN CURRENCY     867,872       2,419,454       723,556       22,065  
                                 
NET INCREASE IN CASH AND CASH                                
EQUIVALENTS     25,032,855       6,668,039       3,556,771       108,471  
                                 
CASH AND CASH EQUIVALENTS AT                                
THE BEGINNING OF THE YEAR     19,993,516       45,026,371       51,694,410       1,576,530  
                                 
CASH AND CASH EQUIVALENTS AT                                
THE END OF THE YEAR   $ 45,026,371     $ 51,694,410     $ 55,251,181     $ 1,685,001  

 

 

The accompanying notes are an integral part of the consolidated financial statements. (Concluded)

 

F- 9

ADVANCED SEMICONDUCTOR ENGINEERING, INC. AND SUBSIDIARIES

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

(Amounts in Thousands, Unless Stated Otherwise)

 

1. GENERAL INFORMATION

 

Advanced Semiconductor Engineering, Inc. (the “Company”), a corporation incorporated under the laws of Republic of China (the “ROC”), and its subsidiaries (collectively referred to as the “Group”) offer a comprehensive range of semiconductors packaging, testing, and electronic manufacturing services (“EMS”).

 

The Company’s ordinary shares are listed on the Taiwan Stock Exchange (the “TSE”) under the symbol “2311”. Since September 2000, the ordinary shares of the Company have been traded on the New York Stock Exchange (the “NYSE”) under the symbol “ASX” in the form of American Depositary Shares (“ADS”). The ordinary shares of its subsidiary, Universal Scientific Industrial (Shanghai) Co., Ltd (the “USISH”), are listed on the Shanghai Stock Exchange (the “SSE”) under the symbol “601231”.

 

The consolidated financial statements are presented in the Company’s functional currency, New Taiwan dollar (NT$).

 

2. APPROVAL OF FINANCIAL STATEMENTS

 

The consolidated financial statements were authorized for issue by the management on April 28, 2016.

 

3. APPLICATION OF NEW AND REVISED INTERNATIONAL FINANCIAL REPORTING STANDARDS AS ISSUED BY THE INTERNATIONAL ACCOUNTING STANDARDS BOARD

 

Starting from 2013, the consolidated financial statements were prepared in accordance with International Financial Reporting Standards (IFRS), International Accounting Standards (IAS), Interpretations of IFRS (IFRIC), and Interpretations of IAS (SIC) issued by International Accounting Standards Board (“IASB”) (collectively referred to as the “IFRSs”). The date of transition to IFRSs is January 1, 2012.

 

a. Amendments to IFRSs that are mandatorily effective for the current year

 

In the current year, the Group has applied the following new, revised or amended standards and interpretations that have been issued and effective:

 

New, Revised or Amended Standards and Interpretations   Effective Date Issued
by IASB (Note)
         
Amendments to IFRSs   Annual Improvements to IFRSs: 2010-2012 Cycle   July 1, 2014
Amendments to IFRSs   Annual Improvements to IFRSs: 2011-2013 Cycle   July 1, 2014
Amendments to IAS 19   Defined Benefit Plans: Employee Contributions   July 1, 2014

 

Note: The aforementioned new, revised or amended standards and interpretations are effective for annual period beginning on or after the effective dates, unless specified otherwise.

 

F- 10

The Group believes that the adoption of aforementioned standards or interpretations will not have a significant effect on the Group’s accounting policies.

 

b. New, revised or amended standards and interpretations in issue but not yet effective

 

The Group has not applied the following new, revised or amended standards and interpretations that have been issued but are not yet effective:

 

New, Revised or Amended Standards and Interpretations   Effective Date Issued by IASB (Note 1)
         
Amendments to IFRSs   Annual Improvements to IFRSs: 2012-2014 Cycle   January 1, 2016 (Note 2)
IFRS 9   Financial Instruments   January 1, 2018
Amendments to IFRS 9 and IFRS 7   Mandatory Effective Date of IFRS 9 and Transition Disclosures   January 1, 2018
Amendments to IFRS 10 and IAS 28   Sale or Contribution of Assets between an Investor and its Associate or Joint Venture   To be determined by the IASB
Amendments to IFRS 10, IFRS 12 and IAS 28   Investment Entities: Applying the Consolidation Exception   January 1, 2016
Amendments to IFRS 11   Accounting for Acquisitions of Interests in Joint Operations   January 1, 2016
IFRS 14   Regulatory Deferral Accounts   January 1, 2016
IFRS 15   Revenue from Contracts with Customers   January 1, 2018
Amendments to IFRS 15   Clarifications to IFRS 15 “Revenue from Contracts with Customers”   January 1, 2018
IFRS 16   Leases   January 1, 2019
Amendments to IAS 1   Disclosure Initiative   January 1, 2016
Amendments to IAS 7   Disclosure Initiative   January 1, 2017
Amendments to IAS 12   Recognition of Deferred Tax Assets for Unrealized Losses   January 1, 2017
Amendments to IAS 16 and IAS 38   Clarification of Acceptable Methods of Depreciation and Amortization   January 1, 2016
Amendments to IAS 16 and IAS 41   Agriculture: Bearer Plants   January 1, 2016

 

Note 1: The aforementioned new, revised or amended standards and interpretations are effective for annual period beginning on or after the effective dates, unless specified otherwise.

 

Note 2: The amendment to IFRS 5 is applied prospectively to changes in a method of disposal that occur in annual periods beginning on or after January 1, 2016; the remaining amendments are applied retrospectively for annual periods beginning on or after January 1, 2016.

 

c. Significant changes in accounting policy resulted from new, revised and amended standards and interpretations in issue but not yet effective

 

Except for the following, the Group believes that the adoption of aforementioned new, revised or amended standards and interpretations will not have a material effect on the Group’s accounting policies. As of the date that the accompanying consolidated financial statements were authorized for issue, the Group continues in evaluating the impact on its financial position and operating results as a result of the initial adoption of the below standards and interpretations. The related impact will be disclosed when the Group completes the evaluation.

 

F- 11

IFRS 9 “Financial Instruments”

 

Recognition and measurement of financial assets

 

With regards to financial assets, all recognized financial assets that are within the scope of IAS 39 “Financial Instruments: Recognition and Measurement” are subsequently measured at amortized cost or fair value. Under IFRS 9, the requirement for the classification of financial assets is stated below.

 

For the Group’s debt instruments that have contractual cash flows that are solely payments of principal and interest on the principal amount outstanding, their classification and measurement are as follows:

 

1) For debt instruments, if they are held within a business model whose objective is to collect the contractual cash flows, the financial assets are measured at amortized cost and are assessed for impairment continuously with impairment loss recognized in profit or loss, if any. Interest revenue is recognized in profit or loss by using the effective interest method;

 

2) For debt instruments, if they are held within a business model whose objective is achieved by both the collecting of contractual cash flows and the selling of financial assets, the financial assets are measured at fair value through other comprehensive income (FVTOCI) and are assessed for impairment. Interest revenue is recognized in profit or loss by using the effective interest method, and other gain or loss shall be recognized in other comprehensive income, except for impairment gains or losses and foreign exchange gains and losses. When the debt instruments are derecognized or reclassified, the cumulative gain or loss previously recognized in other comprehensive income is reclassified from equity to profit or loss.

 

Except for above, all other financial assets are measured at fair value through profit or loss. However, the Group may make an irrevocable election to present subsequent changes in the fair value of an equity investment (that is not held for trading) in other comprehensive income, with only dividend income generally recognized in profit or loss. No subsequent impairment assessment is required, and the cumulative gains or losses previously recognized in other comprehensive income cannot be reclassified from equity to profit or loss.

 

The impairment of financial assets

 

IFRS 9 requires that impairment loss on financial assets is recognized by using the “Expected Credit Losses Model”. The credit loss allowance is required for financial assets measured at amortized cost, financial assets mandatorily measured at FVTOCI, lease receivables, contract assets arising from IFRS 15 “Revenue from Contracts with Customers”, certain written loan commitments and financial guarantee contracts. A loss allowance for the 12-month expected credit losses is required for a financial asset if its credit risk has not increased significantly since initial recognition. A loss allowance for full lifetime expected credit losses is required for a financial asset if its credit risk has increased significantly since initial recognition and is not low. However, a loss allowance for full lifetime expected credit losses is required for trade receivables that do not constitute a financing transaction.

 

For purchased or originated credit-impaired financial assets, the Group takes into account the expected credit losses on initial recognition in calculating the credit-adjusted effective interest rate. Subsequently, any changes in expected losses are recognized as a loss allowance with a corresponding gain or loss recognized in profit or loss.

 

Hedge accounting

 

The main changes in hedge accounting amended the application requirements for hedge accounting to better reflect the entity’s risk management activities. Compared with IAS 39, the main changes include: (1) enhancing types of transactions eligible for hedge accounting, specifically broadening the risk eligible for hedge accounting of non-financial items; (2) changing the way hedging derivative instruments are accounted for to reduce profit or loss volatility; and (3) replacing retrospective effectiveness assessment with the principle of economic relationship between the hedging instrument and the hedged item.

 

F- 12

IFRS 15 “Revenue from Contracts with Customers” and amendments

 

IFRS 15 establishes principles for recognizing revenue that apply to all contracts with customers, and will supersedes IAS 18 “Revenue”, IAS 11 “Construction Contracts” and a number of revenue-related interpretations from January 1, 2018.

 

When applying IFRS 15, an entity shall recognize revenue by applying the following steps:

 

Ÿ Identify the contract with the customer;

 

Ÿ Identify the performance obligations in the contract;

 

Ÿ Determine the transaction price;

 

Ÿ Allocate the transaction price to the performance obligations in the contracts; and

 

Ÿ Recognize revenue when the entity satisfies a performance obligation.

 

The amendments to IFRS 15 clarify how to (1) identify performance obligation; (2) determine whether a company is a principal or an agent; and (3) determine whether the revenue from granting a license should be recognized at a point in time or over time.

 

IFRS 15 requires an entity to identify performance obligations on the basis of distinct promised goods or services. To clarify the concept of “distinct”, the IASB has added the clarification that the objective of the assessment of a promise to transfer goods or services to a customer is to determine whether the nature of the promise, within the context of the contract, is to transfer each of those goods or services individually or, instead, to transfer a combined item or items to which the promised goods or services are inputs.

 

When IFRS 15 and amendments are effective, an entity may elect to apply this Standard either retrospectively to each prior reporting period presented or retrospectively with the cumulative effect of initially applying this Standard recognized at the date of initial application.

 

Amendments to IFRS 10 and IAS 28 “Sale or Contribution of Assets between an Investor and its Associate or Joint Venture”

 

The amendments stipulated that, when an entity sells or contributes assets that constitute a business (as defined in IFRS 3) to an associate or joint venture, the gain or loss resulting from the transaction is recognized in full. Also, when an entity loses control over a subsidiary that contains a business but retains significant influence or joint control, the gain or loss resulting from the transaction is recognized in full.

 

Conversely, when an entity sells or contributes assets that do not constitute a business to an associate or joint venture, the gain or loss resulting from the transaction is recognized only to the extent of the unrelated investors’ interest in the associate or joint venture, i.e. the entity’s share of the gains or losses is eliminated. Also, when an entity loses control over a subsidiary that does not contain a business but retains significant influence or joint control in an associate or a joint venture, the gain or loss resulting from the transaction is recognized only to the extent of the unrelated investors’ interest in the associate or joint venture, i.e. the entity’s share of the gain or loss is eliminated.

 

F- 13

IFRS 16 “Leases”

 

IFRS 16 sets out the accounting standards for leases that will supersede IAS 17 and a number of related interpretations.

 

Under IFRS 16, if the Group is a lessee, it shall recognize right-of-use assets and lease liabilities for all leases on the consolidated balance sheets except for low-value and short-term leases. The Group may elect to apply the accounting method similar to the accounting for operating lease under IAS 17 to the low-value and short-term leases. On the consolidated statements of comprehensive income, the Group should present the depreciation expense charged on the right-of-use asset separately from interest expense accrued on the lease liability; interest is computed by using effective interest method. On the consolidated statements of cash flows, cash payments for the principal portion of the lease liability are classified within financing activities; cash payments for interest portion are classified within operating activities.

 

The application of IFRS 16 is not expected to have a material impact on the accounting of the Group as lessor.

 

When IFRS 16 becomes effective, the Group may elect to apply this Standard either retrospectively to each prior reporting period presented or retrospectively with the cumulative effect of the initial application of this Standard recognized at the date of initial application.

 

Amendments to IAS 12 “Recognition of Deferred Tax Assets for Unrealized Losses”

 

The amendment clarifies that the difference between the carrying amount of the debt instrument measured at fair value and its tax base gives rise to a temporary difference, even though there are unrealized losses on that asset, irrespective of whether the Group expects to recover the carrying amount of the debt instrument by sale or by holding it and collecting contractual cash flows.

 

In addition, in determining whether to recognize a deferred tax asset, the Group should assess a deductible temporary difference in combination with all of its other deductible temporary differences, unless the tax law restricts the utilization of losses to deduction against income of a specific type, in which case, a deductible temporary difference is assessed in combination only with other deductible temporary differences of the appropriate type. The amendment also stipulates that, when determining whether to recognize a deferred tax asset, the estimate of probable future taxable profit may include some of the Group’s assets for more than their carrying amount if there is sufficient evidence that it is probable that the Group will achieve this, and that the estimate for future taxable profit should exclude tax deductions resulting from the reversal of deductible temporary differences.

 

4. SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES

 

a. Statement of Compliance

 

The consolidated financial statements have been prepared in accordance with IFRSs as issued by the IASB.

 

b. Basis of Preparation

 

The consolidated financial statements have been prepared on the historical cost basis except for certain financial instruments that are measured at fair value.

 

The fair value measurements are grouped into Levels 1 to 3 based on the degree to which the fair value measurement inputs are observable and the significance of the inputs to the fair value measurement in its entirety, which are described as follows:

 

F- 14

1) Level 1 inputs are quoted prices (unadjusted) in active markets for identical assets or liabilities;

 

2) Level 2 inputs are inputs other than quoted prices included within Level 1 that are observable for the asset or liability, either directly (i.e. as prices) or indirectly (i.e. derived from prices); and

 

3) Level 3 inputs are unobservable inputs for the asset or liability.

 

c. Classification of Current and Non-current Assets and Liabilities

 

Current assets include cash and cash equivalents and those assets held primarily for trading purposes or expected to be realized within twelve months after the balance sheet date, unless the asset is to be used for an exchange or to settle a liability, or otherwise remains restricted, at more than twelve months after the balance sheet date. Current liabilities are obligations incurred for trading purposes or to be settled within twelve months after the balance sheet date and liabilities that do not have an unconditional right to defer settlement for at least twelve months after the balance sheet date. Assets and liabilities that are not classified as current are classified as non-current.

 

The Group engages in the construction business which has an operating cycle of over one year. The normal operating cycle applies when considering the classification of the Group’s construction-related assets and liabilities.

 

d. Basis of Consolidation

 

1) Principles for preparing consolidated financial statements

 

The consolidated financial statements incorporate the financial statements of the Company and the entities controlled by the Company (i.e. its subsidiaries). Control is achieved when the Group:

 

Ÿ has power over the investee;

 

Ÿ is exposed, or has rights, to variable returns from its involvement with the investee; and

 

Ÿ has the ability to use its power to affect its returns.

 

The Group reassesses whether or not it controls an investee if facts and circumstances indicate that there are changes to one or more of the three elements of control listed above.

 

When the Group has less than a majority of the voting rights of an investee, it has power over the investee when the voting rights are sufficient to give it the practical ability to direct the relevant activities of the investee unilaterally. The Group considers all relevant facts and circumstances in assessing whether or not the Group's voting rights in an investee are sufficient to give it power, including:

 

Ÿ the size of the Group's holding of voting rights relative to the size and dispersion of holdings of the other vote holders;

 

Ÿ potential voting rights held by the Group, other vote holders or other parties;

 

Ÿ rights arising from other contractual arrangements; and

 

Ÿ any additional facts and circumstances that indicate that the Group has, or does not have, the current ability to direct the relevant activities at the time that decisions need to be made, including voting patterns at previous shareholders' meetings.

 

Consolidation of a subsidiary begins when the Group obtains control over the subsidiary and ceases when the Group loses control over the subsidiary. Specifically, income and expenses of subsidiaries acquired or disposed of during the period are included in the consolidated statement of comprehensive income from the effective date of acquisition or up to the effective date of disposal, as appropriate.

 

F- 15

When necessary, adjustments are made to the financial statements of subsidiaries to bring their accounting policies in line with those used by the Company.

 

All intra-group transactions, balances, income and expenses are eliminated in full upon consolidation.

 

Attribution of total comprehensive income to non-controlling interests

 

Total comprehensive income of subsidiaries is attributed to the owners of the Company and to the non-controlling interests even if this results in the non-controlling interests having a deficit balance.

 

Changes in the Group’s ownership interests in existing subsidiaries

 

Changes in the Group’s ownership interests in subsidiaries that do not result in the Group losing control over the subsidiaries are accounted for as equity transactions. The carrying amounts of the Group’s interests and the non-controlling interests are adjusted to reflect the changes in their relative interests in the subsidiaries. Any difference between the amount by which the non-controlling interests are adjusted and the fair value of the consideration paid or received is recognized directly in equity and attributed to the owners of the Company.

 

When the Group loses control over a subsidiary, a gain or loss is recognized in profit or loss and is calculated as the difference between (i) the aggregate of the fair value of the consideration received and any investment retained in the former subsidiary at its fair value at the date when control is lost and (ii) the assets (including any goodwill) and liabilities and any non-controlling interests of the former subsidiary at their carrying amounts at the date when control is lost. The Group accounts for all amounts recognized in other comprehensive income in relation to that subsidiary on the same basis as would be required if the Group had directly disposed of the related assets or liabilities.

 

2) Subsidiaries included in consolidated financial statements were as follows:

 

        Establishment and  

Percentage of

Ownership (%)

December 31

Name of Investee   Main Businesses   Operating Location   2014   2015
                 
A.S.E. Holding Limited   Holding company   Bermuda   100.0   100.0
J & R Holding Limited (“J&R Holding”)   Holding company   Bermuda   100.0   100.0
Innosource Limited   Holding company   British Virgin Islands   100.0   100.0
Omniquest Industrial Limited   Holding company   British Virgin Islands   100.0   100.0
ASE Marketing & Service Japan Co., Ltd.   Engaged in marketing and sales services   Japan   100.0   100.0
ASE Test, Inc.   Engaged in the testing of semiconductors   Kaohsiung, ROC   100.0   100.0
Universal Scientific Industrial Co., Ltd. (“USI”)   Engaged in the manufacturing, processing and sale of computers, computer peripherals and related accessories   Nantou, ROC   99.2   99.0
USI Inc. (“USIINC”)   Engaged in investing activity and established in April 2015   Nantou, ROC   -   99.2

 

(Continued)

 

F- 16

        Establishment and  

Percentage of

Ownership (%)

December 31

Name of Investee   Main Businesses   Operating Location   2014   2015
                 
Luchu Development Corporation (“Luchu”)   Engaged in the development of real estate properties   Taipei, ROC   86.1   86.1
Alto Enterprises Limited   Holding company   British Virgin Islands   100.0   100.0
Super Zone Holdings Limited   Holding company   Hong Kong   100.0   100.0
ASE (Kun Shan) Inc.   Engaged in the packaging and testing of semiconductors   Kun Shan, China   100.0   100.0
ASE Investment (Kun Shan) Limited   Holding company   Kun Shan, China   100.0   100.0
Advanced Semiconductor Engineering (China) Ltd.   Will engage in the packaging and testing of semiconductors   Shanghai, China   100.0   100.0
ASE Investment (Labuan) Inc.   Holding company   Malaysia   100.0   100.0
ASE Test Limited (“ASE Test”)   Holding company   Singapore   100.0   100.0
ASE (Korea) Inc. (“ASE Korea”)   Engaged in the packaging and testing of semiconductors   Korea   100.0   100.0
J&R Industrial Inc.   Engaged in leasing equipment and investing activity   Kaohsiung, ROC   100.0   100.0
ASE Japan Co., Ltd. (“ASE Japan”)   Engaged in the packaging and testing of semiconductors   Japan   100.0   100.0
ASE (U.S.) Inc. (“ASE US”)   After-sales service and sales support   U.S.A.   100.0   100.0
Global Advanced Packaging Technology Limited, Cayman Islands   Holding company   British Cayman Islands   100.0   100.0
ASE WeiHai Inc.   Engaged in the packaging and testing of semiconductors   Shandong, China   100.0   100.0
Suzhou ASEN Semiconductors Co., Ltd.   Engaged in the packaging and testing of semiconductors   Suzhou, China   60.0   60.0
Anstock Limited   Engaged in financing activity   British Cayman Islands   100.0   100.0
Anstock II Limited   Engaged in financing activity   British Cayman Islands   100.0   100.0
ASE Module (Shanghai) Inc.   Will engage in the production and sale of electronic components and printed circuit boards   Shanghai, China   100.0   100.0
ASE (Shanghai) Inc.   Engaged in the production of substrates   Shanghai, China   100.0   100.0
ASE Corporation   Holding company   British Cayman Islands   100.0   100.0
ASE Mauritius Inc.   Holding company   Mauritius   100.0   100.0
ASE Labuan Inc.   Holding company   Malaysia   100.0   100.0
Shanghai Ding Hui Real Estate Development Co., Ltd.   Engaged in the development, construction and sale of real estate properties   Shanghai, China   100.0   100.0

 

(Continued)

 

F- 17

        Establishment and  

Percentage of

Ownership (%)

December 31

Name of Investee   Main Businesses   Operating Location   2014   2015
                 
Shanghai Ding Qi Property Management Co., Ltd.   Engaged in the management of real estate properties and established in January 2015   Shanghai, China   -   100.0
Advanced Semiconductor Engineering (HK) Limited   Engaged in the trading of substrates   Hong Kong   100.0   100.0
Shanghai Ding Wei Real Estate Development Co., Ltd.   Engaged in the development, construction and leasing of real estate properties   Shanghai, China   100.0   100.0
Shanghai Ding Yu Real Estate Development Co., Ltd.   Engaged in the development, construction and leasing of real estate properties   Shanghai, China   100.0   100.0
Kun Shan Ding Yue Real Estate Development Co., Ltd.   Engaged in the development, construction and leasing of real estate properties   Kun Shan, China   100.0   100.0
Kun Shan Ding Hong Real Estate Development Co., Ltd.   Engaged in the development, construction and leasing of real estate properties   Kun Shan, China   100.0   100.0
ASE Electronics Inc.   Engaged in the production of substrates   Kaohsiung, ROC   100.0   100.0
ASE Test Holdings, Ltd.   Holding company   British Cayman Islands   100.0   100.0
ASE Holdings (Singapore) Pte. Ltd.   Holding company   Singapore   100.0   100.0
ASE Test Finance Limited   Liquidated in July 2015   Mauritius   100.0   -
ASE Singapore Pte. Ltd.   Engaged in the packaging and testing of semiconductors   Singapore   100.0   100.0
ISE Labs, Inc.   Engaged in the testing of semiconductors   U.S.A.   100.0   100.0
ASE Electronics (M) Sdn. Bhd.   Engaged in the packaging and testing of semiconductors   Malaysia   100.0   100.0
ASE Assembly & Test (Shanghai) Limited   Engaged in the packaging and testing of semiconductors   Shanghai, China   100.0   100.0
ASE Trading (Shanghai) Ltd.   Engaged in trading activity and was invested by ASE Assembly & Test (Shanghai) Limited in January 2015   Shanghai, China   -   100.0
Wuxi Tongzhi Microelectronics Co., Ltd. (“Wuxi Tongzhi”)   Engaged in the packaging and testing of semiconductors   Wuxi, China   100.0   100.0
Huntington Holdings International Co., Ltd.   Holding company   British Virgin Islands   99.2   99.2
Senetex Investment Co., Ltd.   Liquidated in December 2015   Nantou, ROC   99.2   -
Unitech Holdings International Co., Ltd.   Holding company   British Virgin Islands   99.2   99.2

 

(Continued)

 

F- 18

        Establishment and  

Percentage of

Ownership (%)

December 31

Name of Investee   Main Businesses   Operating Location   2014   2015
                 
Real Tech Holdings Limited   Holding company   British Virgin Islands   99.2   99.2
Universal ABIT Holding Co., Ltd.   In the process of liquidation   British Cayman Islands   99.2   99.2
Rising Capital Investment Limited   Holding company   British Virgin Islands   99.2   99.2
Rise Accord Limited   Holding company   British Virgin Islands   99.2   99.2
Cubuy Corporation   Liquidated in July 2015   Shanghai, China   99.2   -
Universal Scientific Industrial (Kunshan) Co., Ltd.   Engaged in the manufacturing and sale of computer assistance system and related peripherals   Kun Shan, China   99.2   99.2
USI Enterprise Limited (“USIE”)   Engaged in the services of investment advisory and warehousing management   Hong Kong   98.7   96.7
Universal Scientific Industrial (Shanghai) Co., Ltd. (“USISH”)   Engaged in the designing, manufacturing and sale of electronic components   Shanghai, China   82.1   75.7
Universal Global Technology Co., Limited   Holding company   Hong Kong   82.1   75.7
Universal Global Technology (Kunshan) Co., Ltd.   Engaged in the designing and manufacturing of electronic components   Kun Shan, China   82.1   75.7
Universal Global Technology (Shanghai) Co., Ltd.   Engaged in the processing and sales of computer and communication peripherals as well as business in import and export of goods and technology   Shanghai, China   82.1   75.7
Universal Global Electronics (Shanghai) Co., Ltd.   Engaged in the sale of electronic components and telecommunications equipment   Shanghai, China   82.1   75.7
Universal Global Industrial Co., Limited   Engaged in manufacturing, trading and investing activity   Hong Kong   82.1   75.7
Universal Global Scientific Industrial Co., Ltd. (“UGTW”)   Engaged in the manufacturing of components of telecomm and cars and provision of related R&D services   Nantou, ROC   82.1   75.7

 

(Continued)

 

F- 19

        Establishment and  

Percentage of

Ownership (%)

December 31

Name of Investee   Main Businesses   Operating Location   2014   2015
                 
USI America Inc.   Engaged in the manufacturing and processing of motherboards and wireless network communication and provision of related technical service.  The name was changed from USI Manufacturing Service Inc. to USI America Inc. in May 2015   U.S.A.   82.1   75.7
Universal Scientific Industrial De Mexico S.A. De C.V.   Engaged in the assembling of motherboards and computer components   Mexico   82.1   75.7
USI Japan Co., Ltd.   Engaged in the manufacturing and sale of computer peripherals, integrated chip and other related accessories   Japan   82.1   75.7
USI@Work, Inc.   Merged into USI America Inc. in August 2015   U.S.A.   82.1   -
USI Electronics (Shenzhen) Co., Ltd.   Engaged in the design, manufacturing and sale of motherboards and computer peripherals   Shenzhen, China   82.1   75.7

 

(Concluded)

 

a) To enhance operational flexibility via structural adjustments, the board of directors of the Company’s subsidiary, USI, approved to spin-off of its investment business as well as capital reduction of NT$16,012,966 thousand (US$488,349 thousand) by reducing 1,601,297 thousand shares (a reduction ratio of 97.56%), and would transfer its investment business to USIINC, a newly established business entity. The record date of the spin-off was April 1, 2015. USI completed the registration process of capital reduction on April 17, 2015, and USIINC also completed the registration of the incorporation on the same date. Based on the consideration of the business value to be spun-off by USI, USIINC issued 1,000,000 thousand new ordinary shares to the shareholders of USI. Based on the shareholdings on the record date of the spin-off, the shareholders of USI received 609.27 shares of USIINC’s ordinary share in exchange of each 1,000 shares of USI’s ordinary share. After the spin-off, the Group has control over both USI and USIINC, and the spin-off did not have material impact on the financial position and business operation of the Group.

 

b) To integrate the Group’s EMS upstream and downstream business resources, the board of directors approved in September 2015 the disposal of the Company’s 39,603 thousand shares in USI to the Company’s subsidiary, UGTW, at NT$20 (US$0.6) per share. Total consideration is NT$792,064 thousand (US$24,156 thousand) and the transaction price is based on the net value per share of USI’s audited financial statements as of June 30, 2015. The transaction has been approved by the Investment Commission of the ROC in February 2016 and the majority of the shares were transferred in March 2016, with the remaining to be transferred in May 2016.

 

e. Business Combinations

 

Acquisitions of businesses are accounted for using the acquisition method. The consideration transferred in a business combination is measured at fair value, which is calculated as the sum of the acquisition-date fair values of the assets transferred by the Group, liabilities incurred by the Group to the former owners of the acquiree and the equity interests issued by the Group in exchange for control of the acquiree. Acquisition-related costs are recognized in profit or loss as incurred.

 

F- 20

 Goodwill is measured as the excess of the sum of the consideration transferred, the amount of any non-controlling interests in the acquiree, and the fair value of the acquirer's previously held equity interest in the acquiree (if any) over the net of the acquisition-date amounts of the identifiable assets acquired and the liabilities assumed. If, after re-assessment, the net of the acquisition-date amounts of the identifiable assets acquired and liabilities assumed exceeds the sum of the consideration transferred, the amount of any non-controlling interests in the acquiree and the fair value of the acquirer’s previously held interest in the acquiree (if any), the excess is recognized immediately in profit or loss as a bargain purchase gain.

 

When a business combination is achieved in stages, the Group's previously held equity interest in the acquiree is remeasured to its acquisition-date fair value and the resulting gain or loss, if any, is recognized in profit or loss. Amounts arising from interests in the acquiree prior to the acquisition date that have previously been recognized in other comprehensive income are recognized on the same basis as would be required if that interest were directly disposed of by the Group.

 

If the initial accounting for a business combination is incomplete by the end of the reporting period in which the combination occurs, the Group reports provisional amounts for the items for which the accounting is incomplete. Those provisional amounts are adjusted retrospectively during the measurement period, or additional assets or liabilities are recognized, to reflect new information obtained about facts and circumstances that existed at the acquisition date that, if known, would have affected the amounts recognized at that date.

 

Business combination involving entities under common control is not accounted for by acquisition method but accounted for at the carrying amounts of the entities. Prior period comparative information in the financial statements is restated as if a business combination involving entities under common control had already occurred in that period.

 

f. Foreign Currencies

 

In preparing the financial statements of each individual group entity, transactions in currencies other than the entity’s functional currency (foreign currencies) are recognized at the rates of exchange prevailing at the dates of the transactions. At each balance sheet date, monetary items denominated in foreign currencies are retranslated at the rates prevailing at that date. Non-monetary items carried at fair value that are denominated in foreign currencies are retranslated at the rates prevailing at the date when the fair value was determined. Non-monetary items that are measured in terms of historical cost in a foreign currency are not retranslated.

 

Exchange differences on monetary items arising from settlement or translation are recognized in profit or loss in the period in which they arise.

 

Exchange differences arising on the retranslation of non-monetary assets (such as equity instruments) or liabilities measured at fair value are included in profit or loss for the period at the rates prevailing at the balance sheet date except for exchange differences arising on the retranslation of non-monetary items in respect of which gains and losses are recognized directly in other comprehensive income, in which case, the exchange differences are also recognized directly in other comprehensive income.

 

For the purposes of presenting the consolidated financial statements, the assets and liabilities of the Group’s foreign operations are translated into New Taiwan dollars using exchange rates prevailing at each balance sheet date. Income and expense items are translated at the average exchange rates for the period. Exchange differences arising are recognized in other comprehensive income and accumulated in equity attributed to the owners of the Company and non-controlling interests as appropriate.

 

F- 21

On the disposal of the Group’s entire interest in a foreign operation, or a disposal involving loss of control over a subsidiary that includes a foreign operation, all of the exchange differences accumulated in equity in respect of that operation attributable to the owners of the Company are reclassified to profit or loss.

 

In relation to a partial disposal of a subsidiary that does not result in the Group losing control over the subsidiary, the proportionate share of accumulated exchange differences is re-attributed to non-controlling interests of the subsidiary and is not recognized in profit or loss. For all other partial disposals of associates or joint arrangements that do not result in the Group losing significant influence or joint control, the proportionate share of the accumulated exchange differences recognized in other comprehensive income is reclassified to profit or loss.

 

g. Inventories and Inventories Related to Real Estate Business

 

Inventories, including raw materials (materials received from customers for processing, mainly semiconductor wafers, are excluded from inventories as title and risk of loss remain with the customers), supplies, work in process, finished goods, and materials and supplies in transit are stated at the lower of cost or net realizable value. Inventory write-downs are made by item, except for those that may be appropriate to group items of similar or related inventories. Net realizable value is the estimated selling prices of inventories less all estimated costs of completion and estimated costs necessary to make the sale. Raw materials and supplies are recorded at moving average cost while work in process and finished goods are recorded at standard cost.

 

Inventories related to real estate business include land and buildings held for sale, land held for construction and construction in progress. Land held for development is recorded as land held for construction upon obtaining the title of ownership. Prior to the completion, the borrowing costs directly attributable to construction in progress are capitalized as part of the cost of the asset. Construction in progress is transferred to land and buildings held for sale upon completion. Land and buildings held for sale, construction in progress and land held for construction are stated at the lower of cost or net realizable value and related write-downs are made by item. The amounts received in advance for real estate properties are first recorded as advance receipts and then recognized as revenue when the construction is completed and the title and significant risk of the real estate properties are transferred to customers. Cost of sales of land and buildings held for sale are recognized based on the ratio of property sold to the total property developed.

 

h. Investments in associates and joint ventures

 

An associate is an entity over which the Group has significant influence and that is neither a subsidiary nor an interest in a joint venture. Joint venture is a joint arrangement whereby the Group and other parties that have joint control of the arrangement have rights to the net assets of the arrangement.

 

The Group uses the equity method to account for its investments in associates and joint ventures.

 

Under the equity method, investments in an associate and a joint venture are initially recognized at cost and adjusted thereafter to recognize the Group’s share of the profit or loss and other comprehensive income of the associate and joint venture. The Group also recognizes the changes in the Group’s share of equity of associates and joint venture.

 

Any excess of the cost of acquisition over the Group’s share of the fair value of the net identifiable assets and liabilities of an associate or a joint venture at the date of acquisition is recognized as goodwill, which is included within the carrying amount of the investment and is not amortized.

 

Gains and losses resulting from upstream, downstream and sidestream transactions between the Group (including its subsidiaries) and its associates or joint ventures are recognized in the Group’s consolidated financial statements only to the extent of interests in the associates or joint ventures that are not related to the Group.

 

F- 22

i. Property, Plant and Equipment

 

Except for land which is stated at cost, property, plant and equipment are stated at cost less accumulated depreciation and accumulated impairment.

 

Properties in the course of construction for production, supply or administrative purposes are carried at cost, less any recognized impairment loss. Cost includes professional fees and borrowing costs eligible for capitalization. Such properties are classified to the appropriate categories of property, plant and equipment when completed and ready for intended use. Depreciation of these assets, on the same basis as other property assets, commences when the assets are ready for their intended use.

 

Freehold land is not depreciated.

 

Depreciation on property, plant and equipment is recognized using the straight-line method. Each significant part is depreciated separately. If the lease term is shorter than the useful lives, assets are depreciated over the lease term. The estimated useful lives, residual values and depreciation method are reviewed at each balance sheet date, with the effect of any changes in estimate accounted for on a prospective basis.

 

On derecognition of an item of property, plant and equipment, the difference between the sales proceeds and the carrying amount of the asset is recognized in profit or loss.

 

j. Goodwill

 

Goodwill arising from an acquisition of a business is carried at cost as established at the date of acquisition of the business less accumulated impairment loss.

 

For the purposes of impairment testing, goodwill is allocated to each of the Group’s cash-generating units or groups of cash-generating units (referred to as cash-generating units) that is expected to benefit from the synergies of the combination.

 

A cash-generating unit to which goodwill has been allocated is tested for impairment annually, or more frequently when there is an indication that the unit may be impaired, by comparing its carrying amount, including the attributed goodwill, with its recoverable amount. However, if the goodwill allocated to a cash-generating unit was acquired in a business combination during the current annual period, that unit shall be tested for impairment before the end of the current annual period. If the recoverable amount of the cash-generating unit is less than its carrying amount, the impairment loss is allocated first to reduce the carrying amount of any goodwill allocated to the unit and then to the other assets of the unit pro rata based on the carrying amount of each asset in the unit. Any impairment loss is recognized directly in profit or loss. An impairment loss recognized for goodwill is not reversed in subsequent periods.

 

k. Other Intangible Assets

 

Other intangible assets with finite useful lives acquired separately are initially measured at cost and subsequently measured at cost less accumulated amortization and accumulated impairment. Other intangible assets are amortized based on the pattern in which the economic benefits are consumed or using the straight-line method over their estimated useful lives. The estimated useful lives, residual value and amortization methods are reviewed at each balance sheet date, with the effect of any changes in estimate being accounted for on a prospective basis. Intangible assets with indefinite useful lives that are acquired separately are measured at cost less accumulated impairment loss.

 

Other intangible assets acquired in a business combination and recognized separately from goodwill are initially recognized at their fair value at the acquisition date which is regarded as their cost.

F- 23

Subsequent to initial recognition, they are measured on the same basis as intangible assets that are acquired separately.

 

On derecognition of an intangible asset, the difference between the net disposal proceeds and the carrying amount of the asset are recognized in profit or loss.

 

l. Impairment of Tangible and Intangible Assets Other than Goodwill

 

At each balance sheet date, the Group reviews the carrying amounts of its tangible and intangible assets, excluding goodwill (see above), to determine whether there is any indication that those assets have suffered an impairment loss. If any such indication exists, the recoverable amount of the asset is estimated in order to determine the extent of the impairment loss. When it is not possible to estimate the recoverable amount of an individual asset, the Group estimates the recoverable amount of the cash-generating unit to which the asset belongs. Corporate assets are allocated to the individual cash-generating units on a reasonable and consistent basis of allocation. Recoverable amount is the higher of fair value less costs to sell and value in use. If the recoverable amount of an asset or cash-generating unit is estimated to be less than its carrying amount, the carrying amount of the asset or cash-generating unit is reduced to its recoverable amount, with the resulting impairment loss recognized in profit or loss.

 

When an impairment loss is subsequently reversed, the carrying amount of the asset or cash-generating unit is increased to the revised estimate of its recoverable amount, but only to the extent of the carrying amount that would have been determined had no impairment loss been recognized for the asset or cash-generating unit in prior years. A reversal of an impairment loss is recognized immediately in profit or loss.

 

m. Financial Instruments

 

Financial assets and financial liabilities are recognized when a group entity becomes a party to the contractual provisions of the instruments. Financial assets and financial liabilities are initially measured at fair value. Transaction costs that are directly attributable to the acquisition or issue of financial assets and financial liabilities (other than financial assets and financial liabilities at fair value through profit or loss) are added to or deducted from the fair value of the financial assets or financial liabilities, as appropriate, on initial recognition. Transaction costs directly attributable to the acquisition of financial assets or financial liabilities at fair value through profit or loss are recognized immediately in profit or loss.

 

1) Financial assets

 

All regular way purchases or sales of financial assets are recognized or derecognized on a settlement date basis.

 

a) Measurement category

 

The classification of financial assets held by the Group depends on the nature and purpose of the financial assets and is determined at the time of initial recognition.

 

i. Financial assets at fair value through profit or loss (“FVTPL”)

 

Financial assets are classified as at FVTPL when the financial assets are either held for trading or they are designated as at FVTPL.

 

A financial asset other than a financial asset held for trading may be designated as at FVTPL upon initial recognition if:

 

F- 24

 

Such designation eliminates or significantly reduces a measurement or recognition inconsistency that would otherwise arise; or

 

The financial asset forms part of a group of financial assets or financial liabilities or both, which is managed and its performance is evaluated on a fair value basis, in accordance with the Group's documented risk management or investment strategy, and information about the grouping is provided internally on that basis; or

 

It forms part of a contract containing one or more embedded derivatives, and IAS 39 permits the entire combined contract to be designated as at FVTPL.

 

Financial assets at FVTPL are stated at fair value with any gains or losses arising on remeasurement recognized in profit or loss. The net gain or loss recognized in profit or loss incorporates any dividend or interest earned on the financial asset.

 

Fair value is determined in the manner described in Note 31.

 

ii. Available-for-sale financial assets

 

Available-for-sale financial assets are non-derivatives that are either designated as available-for-sale or are not classified as (a) loans and receivables, (b) held-to-maturity investments or (c) financial assets at fair value through profit or loss.

 

Available-for-sale financial assets are stated at fair value at each balance sheet date. Changes in the carrying amount of available-for-sale monetary financial assets relating to changes in foreign currency rates, interest income calculated using the effective interest method and dividends on available-for-sale equity investments are recognized in profit or loss. Other changes in the carrying amount of available-for-sale financial assets are recognized in other comprehensive income and accumulated under the heading of unrealized gain (loss) on available-for-sale financial assets. When the investment is disposed of or is determined to be impaired, the cumulative gain or loss previously accumulated in the unrealized gain (loss) on available-for-sale financial assets is reclassified to profit or loss.

 

Dividends on available-for-sale equity instruments are recognized in profit or loss when the Group's right to receive the dividends is established.

 

iii. Loans and receivables

 

Loans and receivables including cash and cash equivalents, trade receivables, other receivables, other financial assets and debt investments with no active market are measured at amortized cost using the effective interest method, less any impairment. Interest income is recognized by applying the effective interest rate, except for short-term receivables when the effect of discounting is immaterial.

 

Cash equivalents are short-term, highly liquid investments that are readily convertible to known amounts of cash and which are subject to an insignificant risk of change in value.

 

b) Impairment of financial assets

 

Financial assets, other than those at FVTPL, are assessed for indicators of impairment at each balance sheet date. Financial assets are considered to be impaired when there is objective evidence that, as a result of one or more events that occurred after the initial recognition of the financial assets, the estimated future cash flows of the investments have been affected.

 

F- 25

For financial assets carried at amortized cost, such as trade receivables and other receivables, assets that are assessed not to be impaired individually are, further, assessed for impairment on a collective basis. The Group assesses the collectability of receivables based on the Group’s past experience of collecting payments and observable changes that correlate with default on receivables.

 

For financial assets carried at amortized cost, the amount of the impairment loss recognized is the difference between the assets’ carrying amounts and the present value of estimated future cash flows, discounted at the financial assets’ original effective interest rates. If, in a subsequent period, the amount of the impairment loss decreases and the decreases can be objectively related to an event occurring after the impairment loss recognized, the previously recognized impairment loss is reversed either directly or by adjusting an allowance account through profit or loss. The reversal shall not result in carrying amounts of financial assets that exceed what the amortized cost would have been at the date the impairment is reversed.

 

When an available-for-sale financial asset is considered to be impaired, cumulative gains or losses previously recognized in other comprehensive income are reclassified to profit or loss in the period. In respect of available-for-sale equity securities, impairment loss previously recognized in profit or loss are not reversed through profit or loss. Any increase in fair value subsequent to an impairment loss is recognized in other comprehensive income and accumulated under the heading of unrealized gain (loss) on available-for-sale financial assets.

 

The carrying amount of the financial asset is reduced by the impairment loss directly for all financial assets with the exception of trade receivables where the carrying amount is reduced through the use of an allowance account. When a trade receivable is considered uncollectible, it is written off against the allowance account. Subsequent recoveries of amounts previously written off are credited against the allowance account. Changes in the carrying amount of the allowance account are recognized in profit or loss except for uncollectible trade receivables that are written off against the allowance account.

 

c) Derecognition of financial assets

 

The Group derecognizes a financial asset only when the contractual rights to the cash flows from the asset expire, or when it transfers the financial asset and substantially all the risks and rewards of ownership of the asset to another entity. On derecognition of a financial asset in its entirety, the difference between the asset’s carrying amount and the sum of the consideration received and receivable and the cumulative gain or loss that had been recognized in other comprehensive income and accumulated in equity is recognized in profit or loss.

 

2) Equity instruments

 

Debt and equity instruments issued by a group entity are classified as either financial liabilities or as equity in accordance with the substance of the contractual arrangements and the definitions of a financial liability and an equity instrument.

 

Equity instruments issued by a group entity are recognized at the proceeds received, net of direct issue costs.

 

Repurchase of the Company’s own equity instruments is recognized in and deducted directly from equity. No gain or loss is recognized in profit or loss on the purchase, sale, issue or cancellation of the Company’s own equity instruments.

 

3) Financial liabilities

 

Financial liabilities are measured either at amortized cost using the effective interest method or at FVTPL. Financial liabilities measured at FVTPL are held for trading.

 

F- 26

Financial liabilities at FVTPL are stated at fair value, with any gain or loss arising on remeasurement recognized in profit or loss. The net gain or loss recognized in profit or loss incorporates any interest or dividend paid on the financial liability. Fair value is determined in the manner described in Note 31.

 

The Group derecognizes financial liabilities when, and only when, the Group’s obligations are discharged, cancelled or they expire. The difference between the carrying amount of the financial liability derecognized and the consideration paid and payable is recognized in profit or loss.

 

4) Derivative financial instruments

 

Derivatives are initially recognized at fair value at the date the derivative contracts are entered into and are subsequently remeasured to their fair value at each balance sheet date. The resulting gain or loss is recognized in profit or loss immediately unless the derivative is designated and effective as a hedging instrument , in which event the timing of the recognition in profit or loss depends on the nature of the hedge relationship. When the fair value of derivative financial instruments is positive, the derivative is recognized as a financial asset; when the fair value of derivative financial instruments is negative, the derivative is recognized as financial liabilities.

 

Derivatives embedded in non-derivative host contracts are treated as separate derivatives when they meet the definition of a derivative, their risks and characteristics are not closely related to those of the host contracts and the contracts are not measured at FVTPL.

 

5) Convertible bonds

 

a) Convertible bonds contain conversion option classified as an equity

 

The component parts of compound instruments (convertible bonds) issued by the Group are classified separately as financial liabilities and equity in accordance with the substance of the contractual arrangements and the definitions of a financial liability and an equity instrument.

 

On initial recognition, the fair value of the liability component is estimated using the prevailing market interest rate for similar non-convertible instruments. This amount is recorded as a liability on an amortized cost basis using the effective interest method until extinguished upon conversion or the instrument’s maturity date. Any embedded derivative liability is measured at fair value.

 

The conversion option classified as equity is determined by deducting the amount of the liability component from the fair value of the compound instrument as a whole. This is recognized and included in equity, net of income tax effects, and is not subsequently remeasured. In addition, the conversion option classified as equity will remain in equity until the conversion option is exercised, in which case, the balance recognized in equity will be transferred to capital surplus - share premium. When the conversion option remains unexercised at maturity, the balance recognized in equity will be transferred to capital surplus - share premium.

 

Transaction costs that relate to the issue of the convertible bonds are allocated to the liability and equity components in proportion to the allocation of the gross proceeds. Transaction costs relating to the equity component are recognized directly in equity. Transaction costs relating to the liability component are included in the carrying amount of the liability component.

 

b) Convertible bonds contain conversion option classified as a liability

 

The conversion options component of the convertible bonds issued by the Group that will be settled other than by the exchange of a fixed amount of cash or other financial asset for a fixed number of the Group’s own equity instruments is classified as derivative financial liabilities.

 

F- 27

On initial recognition, the derivative financial liabilities component of the convertible bonds is recognized at fair value, and the initial carrying amount of the component of non-derivative financial liabilities is determined by deducting the amount of derivative financial liabilities from the fair value of the hybrid instrument as a whole. In subsequent periods, the non-derivative financial liabilities component of the convertible bonds is measured at amortized cost using the effective interest method. The derivative financial liabilities component is measured at fair value and the changes in fair value are recognized in profit or loss.

 

Transaction costs that relate to the issue of the convertible bonds are allocated to the derivative financial liabilities component and the non-derivative financial liabilities component in proportion to their relative fair values. Transaction costs relating to the derivative financial liabilities component are recognized immediately in profit or loss. Transaction costs relating to the non-derivative financial liabilities component are included in the carrying amount of the liability component.

 

n. Hedge Accounting

 

The Group designates certain hedging instruments as cash flow hedges. At the inception of the hedge relationship, the Group documents the relationship between the hedging instrument and the hedged item, along with its risk management objectives and its strategy for undertaking various hedge transactions. Furthermore, at the inception of the hedge and on an ongoing basis, the Group documents whether the hedging instrument is highly effective in offsetting changes in fair values or cash flows of the hedged item attributable to the hedged risk.

 

The effective portion of changes in the fair value of derivatives that are designated and qualify as cash flow hedges is recognized in other comprehensive income and accumulated under the heading of cash flow hedges. The gain or loss relating to the ineffective portion is recognized immediately in profit or loss.

 

Amounts previously recognized in other comprehensive income and accumulated in equity are reclassified to profit or loss in the periods when the hedged item affects profit or loss, in the same line as the recognized hedged item. If a hedge of a forecast transaction subsequently results in the recognition of a non-financial asset or a non-financial liability, the associated gains and losses that were recognized in other comprehensive income are removed from equity and are included in the initial cost of the non-financial asset or non-financial liability.

 

Hedge accounting is discontinued prospectively when the Group revokes the designated hedging relationship, or when the hedging instrument expires or is sold, terminated, or exercised, or when it no longer meets the criteria for hedge accounting. The cumulative gain or loss on the hedging instruments that has been previously recognized in other comprehensive income from the period when the hedge was effective remains separately in equity until the forecast transaction occurs. When a forecast transaction is no longer expected to occur, the gain or loss accumulated in equity is recognized immediately in profit or loss.

 

o. Revenue Recognition

 

Revenue is measured at the fair value of the consideration received or receivable take into account of estimated customer returns, rebates and other similar allowances.

 

1) Sale of goods and real estate properties

 

Revenue from the sale of goods and real estate properties is recognized when the goods and real estate properties are delivered and titles have passed, at the time all the following conditions are satisfied:

 

Ÿ The Group has transferred to the buyer the significant risks and rewards of ownership of the goods and real estate properties;

 

F- 28

Ÿ The Group retains neither continuing managerial involvement to the degree usually associated with ownership nor effective control over the goods and real estate properties sold;

 

Ÿ The amount of revenue can be reliably measured;

 

Ÿ It is probable that the economic benefits associated with the transaction will flow to the Group; and

 

Ÿ The costs incurred or to be incurred in respect of the transaction can be reliably measured.

 

2) Rendering of services

 

Service income is recognized when services are rendered.

 

3) Dividend and interest income

 

Dividend income from investments and interest income from financial assets are recognized when they are probable that the economic benefits will flow to the Group and the amount of income can be reliably measured. Interest income is accrued on a time basis, by reference to the principal outstanding and at the effective interest rate applicable.

 

p. Leasing

 

Leases are classified as finance leases whenever the terms of the lease transfer substantially all the risks and rewards of ownership to the lessee. All other leases are classified as operating leases.

 

The Group as lessor

 

Rental income from operating leases is recognized on a straight-line basis over the term of the relevant lease.

 

The Group as lessee

 

Assets held under finance leases are initially recognized as assets of the Group at their fair value at the inception of the lease or, if lower, at the present value of the minimum lease payments. The corresponding liability to the lessor is included in the consolidated balance sheets as a finance lease obligation.

 

Operating lease payments are recognized as expenses on a straight-line basis over the lease term.

 

q. Borrowing Costs

 

Borrowing costs directly attributable to the acquisition, construction or production of qualifying assets are added to the cost of those assets, until such time as the assets are substantially ready for their intended use or sale.

 

Investment income earned on the temporary investment of specific borrowings pending their expenditure on qualifying assets is deducted from the borrowing costs eligible for capitalization.

 

Other than stated above, all other borrowing costs are recognized in profit or loss in the period in which they are incurred.

 

F- 29

r. Government grants

 

Government grants are not recognized until there is reasonable assurance that the Group will comply with the conditions attaching to them and that the grants will be received.

 

Government grants are recognized in profit or loss on a systematic basis over the periods in which the Group recognizes as expenses the related costs for which the grants are intended to compensate. Specifically, government grants whose primary condition is that the Group should purchase, construct or otherwise acquire non-current assets are recognized as deferred revenue in the consolidated financial statements and transferred to profit or loss on a systematic and rational basis over the useful lives of the related assets.

 

Government grants that are receivable as compensation for expenses or losses already incurred or for the purpose of giving immediate financial support to the Group with no future related costs are recognized in profit or loss in the period in which they become receivable.

 

s. Retirement Benefit Costs

 

Payments to defined contribution retirement benefit plans are recognized as expenses when employees have rendered services entitling them to the contributions.

 

Defined benefit costs (including service cost, net interest and remeasurement) under the defined benefit retirement benefit plans are determined using the projected unit credit method. Service cost (including current service cost and past service cost) and net interest on the net defined benefit liability (asset) are recognized as employee benefits expense in the period they occur. Remeasurement, comprising actuarial gains and losses and the return on plan assets (excluding interest), is recognized in other comprehensive income in the period in which they occur. Remeasurement recognized in other comprehensive income is reflected immediately in retained earnings and will not be reclassified to profit or loss.

 

Net defined benefit liability (asset) represents the actual deficit (surplus) in the Group’s defined benefit plan. Any surplus resulting from this calculation is limited to the present value of any refunds from the plans or reductions in future contributions to the plans.

 

t. Employee share options

 

Employee share options granted to employees are measured at the fair value at the grant date. The fair value determined at the grant date is expensed on a straight-line basis over the vesting period, based on the Group's best estimate of the number of options that are expected to ultimately vest, with a corresponding increase in capital surplus - employee share options and non-controlling interests. It is recognized as an expense in full at the grant date if vesting immediately.

 

At each balance sheet date, the Group reviews its estimate of the number of employee share options expected to vest. The impact of the revision of the original estimates is recognized in profit or loss such that the cumulative expense reflects the revised estimate, with a corresponding adjustment to the capital surplus - employee share options and non-controlling interests.

 

u. Taxation

 

Income tax expense represents the sum of the tax currently payable and deferred tax.

 

1) Current tax

 

Income tax on unappropriated earnings (excluding earnings from foreign consolidated subsidiaries) at a rate of 10% is expensed in the year the earnings arise and adjusted to the extent that distributions are approved by the shareholders in the following year.

 

F- 30

Adjustments of prior years’ tax liabilities are added to or deducted from the current year’s tax provision.

 

2) Deferred tax

 

Deferred tax is recognized on temporary differences between the carrying amounts of assets and liabilities in the consolidated financial statements and the corresponding tax bases used in the computation of taxable profit. Deferred tax liabilities are generally recognized for all taxable temporary differences. Deferred tax assets are generally recognized for all deductible temporary differences, unused loss carry-forward and unused tax credits for purchases of machinery and equipment to the extent that it is probable that taxable profits will be available against which those deductible temporary differences can be utilized.

 

Deferred tax liabilities are recognized for taxable temporary differences associated with investments in subsidiaries except where the Group is able to control the reversal of the temporary differences and it is probable that the temporary differences will not reverse in the foreseeable future.

 

The carrying amounts of deferred tax assets is reviewed at each balance sheet date and reduced to the extent that it is no longer probable that sufficient taxable profits will be available to allow all or part of deferred tax assets to be utilized. A previously unrecognized deferred tax asset is also reviewed at each balance sheet date and recognized to the extent that it has become probable that future taxable profit will allow the deferred tax asset to be recovered.

 

Deferred tax assets and liabilities are measured at the tax rates that are expected to apply in the period in which assets are realized or the liabilities are settled. The measurement of deferred tax assets and liabilities reflects the tax consequences that would follow from the manner in which the Group expects, at the balance sheet date, to recover or settle the carrying amounts of its assets and liabilities.

 

3) Current and deferred tax for the year

 

Current and deferred tax are recognized in profit or loss, except when they relate to items that are recognized in other comprehensive income or directly in equity, in which case, the current and deferred tax are also recognized in other comprehensive income or directly in equity, respectively.

 

Where current tax or deferred tax arises from the initial accounting for a business combination, the tax effect is included in the accounting for the business combination.

 

v. U.S. Dollar Amounts

 

A translation of the consolidated financial statements into U.S. dollars is included solely for the convenience of the readers, and has been translated from New Taiwan dollar (NT$) at the exchange rate as set forth in the statistical release by the U.S. Federal Reserve Board of the United States, which was NT$32.79 to US$1.00 as of December 31, 2015. The translation should not be construed as a representation that the NT$ amounts have been, could have been, or could in the future be, converted into U.S. dollars at this or any other rate of exchange.

 

5. CRITICAL ACCOUNTING JUDGMENTS AND KEY SOURCES OF ESTIMATION UNCERTAINTY

 

In the application of the Group’s accounting policies, which are described in Note 4, management is required to make judgments, estimates and assumptions about the carrying amounts of assets and liabilities that are not readily apparent from other sources. The estimates and underlying assumptions are based on historical experience and other factors that are considered to be relevant. Actual results may differ from these estimates.

 

F- 31

The estimates and underlying assumptions are reviewed on an ongoing basis. Revisions to accounting estimates are recognized in the period in which the estimate is revised if the revision affects only that period, or in the period of the revision and future periods if the revision affects both current and future periods.

 

Impairment of Goodwill

 

Determining whether goodwill is impaired requires an estimation of the value in use of the cash-generating units to which goodwill has been allocated. The value in use calculation requires management to estimate the future cash flows expected to arise from cash-generating units and suitable discount rates in order to calculate its present value. When the actual future cash flows are less than expected, a material impairment loss may arise.

 

Impairment of Tangible and Intangible Assets Other than Goodwill

 

In evaluating the impairment of tangible and intangible assets other than goodwill, the Group is required to make subjective judgments in determining the independent cash flows, useful lives, expected future revenue and expenses related to the specific asset groups with the consideration of its usage patterns and the nature of semiconductor industry. Any changes in these estimates based on changed economic conditions or business strategies could result in significant impairment charges in future periods.

 

Valuation of Inventory

 

Inventories are stated at the lower of cost or net realizable value and the net realizable value of inventory at balance sheet date is determined based on Group’s judgments and estimates.

 

Due to the rapid technology changes, the Group estimates the net realizable value of inventory for obsolescent and unmarketable items at balance sheet date and then writes down the cost of inventories to net realizable value. There may be significant changes in the net realizable value of inventories due to assumptions of future demand within a specific time period.

 

Income Taxes

 

The realizability of deferred tax assets mainly depends on whether sufficient future profits or taxable temporary differences will be available. In cases where the actual future profits generated are less than expected, a material reversal of deferred tax assets may arise, which would be recognized in profit or loss for the period in which such a reversal takes place.

 

Recognition and Measurement of Defined Benefit Plans

 

Accrued pension liabilities and the resulting pension expenses under defined benefit pension plans are calculated using the Projected Unit Credit Method. Actuarial assumptions comprise discount rates and expected rates of salary increase. Changes in economic circumstances and market conditions will affect these assumptions and may have a material impact on the amount of the expense and the liability.

 

Fair value measurements and valuation processes

 

As disclosed in Note 31, the Group’s management uses its judgments applying appropriate valuation techniques commonly applied by market practitioners. The assumptions applied are based on observable quoted market prices, foreign exchange rates and interest rates to the extent it is available. The fair value of unquoted equity instruments is estimated based on the assumptions supported by unobservable market prices and interest rates which are disclosed in Note 31. The Group’s management believes that the valuation techniques and the assumptions applied are appropriate in determining the fair value of financial instruments.

 

F- 32

6. CASH AND CASH EQUIVALENTS

 

    December 31
    2014   2015
    NT$   NT$   US$ (Note 4)
             
Cash on hand   $ 9,953     $ 8,806     $ 269  
Checking accounts and demand deposits     43,059,911       50,291,823       1,533,755  
Cash equivalent     8,624,546       4,950,552       150,977  
                         
    $ 51,694,410     $ 55,251,181     $ 1,685,001  

 

Cash equivalents include time deposits that are of a short maturity of three months or less from the date of acquisitions, and are highly liquid, readily convertible to known amounts in cash and the risk of changes in values is insignificant. Cash equivalents are held for the purpose of meeting short-term cash commitments rather than for investments or other purposes.

 

7. FINANCIAL INSTRUMENTS AT FAIR VALUE THROUGH PROFIT OR LOSS

 

    December 31
    2014   2015
    NT$   NT$   US$ (Note 4)
             
Financial assets designated as at FVTPL            
             
Structured time deposits   $ 2,376,050     $ 1,646,357     $ 50,209  
Private-placement convertible bonds     100,500       100,500       3,065  
                         
      2,476,550       1,746,857       53,274  
                         
Financial assets held for trading                        
                         
Swap contracts     1,907,705       1,452,611       44,301  
Open-end mutual funds     533,425       573,242       17,482  
Quoted shares     43,352       37,058       1,130  
Forward exchange contracts     27,811       18,913       577  
Foreign currency option contracts     -       5,020       153  
      2,512,293       2,086,844       63,643  
                         
    $ 4,988,843     $ 3,833,701     $ 116,917  
                         
Financial liabilities held for trading                        
                         
Conversion option, redemption option and put option of convertible bonds (Note 18)   $ 2,520,606     $ 2,632,565     $ 80,286  
Swap contracts     99,165       290,176       8,849  
Forward exchange contracts     31,581       69,207       2,111  
Foreign currency option contracts     -       13,659       416  
Interest rate swap contracts     -       119       4  
                         
    $ 2,651,352     $ 3,005,726     $ 91,666  

 

F- 33

The Group invested in structured time deposits and in private-placement convertible bonds, and all included embedded derivative instruments which are not closely related to the host contracts. The Group designated the entire contracts as financial assets at FVTPL on initial recognition.

 

At each balance sheet date, the outstanding swap contracts not accounted for hedge accounting were as follows:

 

        Notional Amount
Currency   Maturity Period   (In Thousands)
         
December 31, 2014        
         
Sell NT$/Buy US$   2015.01-2015.12   NT$36,199,735/US$1,209,000
Sell US$/Buy NT$   2015.01-2015.02   US$132,100/NT$4,149,958
Sell US$/Buy JPY   2015.01   US$72,248/JPY8,450,000
Sell US$/Buy CNY   2015.01-2015.06   US$80,000/CNY503,452
Sell CNY/Buy US$   2015.03   CNY217,288/US$35,000
         
December 31, 2015        
         
Sell NT$/Buy US$   2016.01~2016.12   NT$57,554,138/US$1,802,834
Sell US$/Buy CNY   2016.01~2016.03   US$353,881/CNY 2,255,872
Sell US$/Buy JPY   2016.03   US$67,125/JPY 8,240,000
Sell US$/Buy NT$   2016.01   US$91,750/NT$ 3,005,494

 

At each balance sheet date, the outstanding forward exchange contracts not accounted for hedge accounting were as follow:

 

        Notional Amount
Currency   Maturity Period   (In Thousands)
         
December 31, 2014        
         
Sell US$/Buy NT$   2015.01   US$14,000/NT$438,434
Sell US$/Buy CNY   2015.01-2015.03   US$127,000/CNY785,683
Sell US$/Buy MYR   2015.01-2015.02   US$6,000/MYR20,860
Sell US$/Buy SGD   2015.01-2015.02   US$11,700/SGD15,211
Sell US$/Buy JPY   2015.01-2015.04   US$18,385/JPY2,177,800
         

 

December 31, 2015        
         
Sell NT$/Buy US$   2016.02   NT$325,400/US$10,000
Sell US$/Buy CNY   2016.01~2016.03   US$121,000/CNY780,252
Sell US$/Buy JPY   2016.01   US$14,000/JPY1,713,388
Sell US$/Buy KRW   2016.01   US$8,000/KRW9,420,350
Sell US$/Buy MYR   2016.01~2016.02   US$6,000/MYR25,525
Sell US$/Buy NT$   2016.01~2016.03   US$155,000/NT$5,088,230
Sell US$/Buy SGD   2016.01~2016.02   US$11,400/SGD16,079

 

F- 34

 

At each balance sheet date, the outstanding foreign currency option contracts not accounted for hedge accounting were as follows:

 

        Notional Amount
Currency   Maturity Period   (In Thousands)
         
December 31, 2015        
         
Buy US$ Call/CNY Put   2016.01~2017.08 (Note)   US$2,000/CNY13,800
Buy US$ Put/CNY Call   2016.03   US$20,000/CNY131,600
Sell US$ Put/CNY Call   2016.01~2017.08 (Note)   US$1,000/CNY6,900
         
Note: The contracts will be settled once a month and the counterparty has the right to early terminate the contracts, or the contracts will be early terminated or both parties will have no obligation to settle the contracts when the specific criteria is met.

 

At each balance sheet date, the outstanding interest rate swap contracts not accounted for hedge accounting were as follows:

 

Maturity Period  

Notional Amounts

(In Thousands)

  Range of Interest Rates Paid   Range of Interest Rates Received
             
December 31, 2015            
             
2016.10   NT$1,000,000   4.6%
(Fixed)
  0.0%~5.0%
(Floating)

 

8. AVAILABLE-FOR-SALE FINANCIAL ASSETS

 

    December 31
    2014   2015
    NT$   NT$   US$ (Note 4)
             
Limited partnership   $ 555,361     $ 476,612     $ 14,535  
Unquoted ordinary shares     211,726       249,217       7,600  
Quoted ordinary shares     195,070       197,580       6,026  
Open-end mutual funds     1,500,434       16,037       489  
Unquoted preferred shares     11,779       15,260       465  
      2,474,370       954,706       29,115  
Current     1,533,265       30,344       925  
                         
Non-current   $ 941,105     $ 924,362     $ 28,190  

 

9. TRADE RECEIVABLES, NET

 

    December 31
    2014   2015
    NT$   NT$   US$ (Note 4)
             
Trade receivables   $ 53,004,955     $ 45,014,393     $ 1,372,808  
Less:  Allowance for doubtful debts     84,145       82,906       2,528  
                         
Trade receivables, net   $ 52,920,810     $ 44,931,487     $ 1,370,280  

 

F- 35

a. Trade receivables

 

The Group’s average credit terms were 30 to 90 days. Allowance for doubtful debts is assessed by reference to the collectability of receivables by evaluating the account aging, historical experience and current financial condition of customers.

 

As of December 31, 2014 and 2015, except that the Group’s five largest customers accounted for 30% and 26% of accounts receivable, respectively, the concentration of credit risk is insignificant for the remaining accounts receivable.

 

Aging of receivables

 

    December 31
    2014   2015
    NT$   NT$   US$ (Note 4)
             
Not past due   $ 47,387,888     $ 40,409,227     $ 1,232,364  
1 to 30 days     5,222,943       3,901,300       118,978  
31 to 90 days     306,052       495,664       15,116  
More than 91 days     88,072       208,202       6,350  
                         
Total   $ 53,004,955     $ 45,014,393     $ 1,372,808  

 

The above aging schedule was based on the past due date.

 

Age of receivables that are past due but not impaired

 

    December 31
    2014   2015
    NT$   NT$   US$ (Note 4)
             
Less than 30 days   $ 5,191,521     $ 3,086,796     $ 94,138  
31 to 90 days     131,247       344,265       10,499  
More than 91 days     1,407       -       -  
                         
Total   $ 5,324,175     $ 3,431,061     $ 104,637  

 

The above aging schedule was based on the past due date.

 

Except for those impaired, the Group had not provided an allowance for doubtful debts on trade receivables at each balance sheet date since there has not been a significant change in credit quality and the amounts were still considered collectible. The Group did not hold any collateral or other credit enhancements over these balances nor did it have a legal right to offset against any amounts owed by the Group to counterparties.

 

Movement of the allowance for doubtful trade receivables

 

   

Impaired

Individually

 

Impaired

Collectively

  Total
    NT$   NT$   NT$
             
Balance at January 1, 2013   $ 34,225     $ 45,912     $ 80,137  
Impairment losses reversed     (5,860 )     (4,033 )     (9,893 )
Amount written off during the period as uncollectible     -       (757 )     (757 )

 

(Continued)

 

F- 36

   

Impaired

Individually

 

Impaired

Collectively

  Total
    NT$   NT$   NT$
             
Effect of foreign currency exchange   $ (1,480 )   $ 113     $ (1,367 )
                         
Balance at December 31, 2013   $ 26,885     $ 41,235     $ 68,120  
                         
Balance at January 1, 2014   $ 26,885     $ 41,235     $ 68,120  
Impairment losses recognized     2,875       15,156       18,031  
Amount written off during the period as uncollectible     (891 )     (917 )     (1,808 )
Effect of foreign currency exchange     (564 )     366       (198 )
                         
Balance at December 31, 2014   $ 28,305     $ 55,840     $ 84,145  
                         
Balance at January 1, 2015   $ 28,305     $ 55,840     $ 84,145  
Impairment losses recognized (reversed)     18,816       (10,584 )     8,232  
Amount written off during the period as uncollectible     (7,617 )     (209 )     (7,826 )
Effect of foreign currency exchange     (458 )     (1,187 )     (1,645 )
                         
Balance at December 31, 2015   $ 39,046     $ 43,860     $ 82,906  

 

(Concluded)

 

   

Impaired

Individually

 

Impaired

Collectively

  Total
    US$ (Note 4)   US$ (Note 4)   US$ (Note 4)
             
Balance at January 1, 2015   $ 863     $ 1,703     $ 2,566  
Impairment losses recognized (reversed)     574       (323 )     251  
Amount written off during the period as uncollectible     (232 )     (7 )     (239 )
Effect of foreign currency exchange     (14 )     (36 )     (50 )
                         
Balance at December 31, 2015   $ 1,191     $ 1,337     $ 2,528  

 

b. Transfers of financial assets

 

Factored trade receivables of the Company were as follows:

 

Counterparties  

Receivables

Sold

(In Thousands)

 

Amounts

Collected

(In Thousands)

 

Advances

Received

At Year-end

(In Thousands)

 

Interest Rates

on Advances

Received

(%)

 

Credit Line

(In Thousands)

                     
Year ended December 31, 2014                    
Citi bank   US$ 103,744     US$ 103,744       —         —       US$ 92,000  
                                         
Year ended December 31, 2015                                        
Citi bank   US$ 78,804     US$ 36,955     US$ 41,849       1.30 %   US$ 92,000  

 

Pursuant to the factoring agreement, losses from commercial disputes (such as sales returns and discounts) should be borne by the Company, while losses from credit risk should be borne by the banks. The Company also issued promissory notes to the banks for commercial disputes which remained undrawn since. The promissory notes both amounted to US$5,000 thousand as of December 31, 2014 and 2015, respectively. As of December 31, 2015, there was no significant loss from commercial disputes in the past and the Company does not expect any significant commercial dispute loss in the foreseeable future.

 

F- 37

 

10. INVENTORIES

 

    December 31
    2014   2015
    NT$   NT$   US$ (Note 4)
             
Finished goods   $ 6,568,459     $ 10,012,182     $ 305,343  
Work in process     2,064,377       1,692,346       51,612  
Raw materials     10,155,006       9,672,894       294,995  
Supplies     797,353       852,251       25,991  
Raw materials and supplies in transit     577,898       1,028,606       31,369  
                         
    $ 20,163,093     $ 23,258,279     $ 709,310  

 

The cost of inventories recognized as operating costs for the years ended December 31, 2013, 2014 and 2015 were NT$176,637,295 thousand, NT$202,960,428 thousand and NT$233,165,722 thousand (US$7,110,879 thousand), respectively, which included write-downs of inventories at NT$453,468 thousand, NT$601,726 thousand and NT$352,011 thousand (US$10,735 thousand), respectively.

 

11. INVENTORIES RELATED TO REAL ESTATE BUSINESS

 

    December 31
    2014   2015
    NT$   NT$   US$ (Note 4)
             
Land and buildings held for sale   $ 5,558     $ 5,431     $ 166  
Construction in progress (Note 16)     22,242,065       23,956,678       730,609  
Land held for construction     1,738,855       1,751,429       53,413  
                         
    $ 23,986,478     $ 25,713,538     $ 784,188  

 

Land and buildings held for sale located in Shanghai Zhangjiang was completed and successively sold. Construction in progress is mainly located on Caobao Road and Hutai Road in Shanghai, China and Lidu Road and Xinhong Road in Kun Shan, China. The capitalized borrowing costs for the years ended December 31, 2013, 2014 and 2015 is disclosed in Note 22.

 

As of December 31, 2014 and 2015, inventories related to real estate business of NT$23,697,339 thousand and NT$24,837,046 thousand(US$757,458 thousand), respectively, are expected to be recovered longer than twelve months.

 

Refer to Note 33 for the carrying amount of inventories related to real estate business that had been pledged by the Group to secure bank borrowings.

 

F- 38

12. INVESTMENTS ACCOUNTED FOR USING THE EQUITY METHOD

 

    December 31
    2014   2015
    NT$   NT$   US$ (Note 4)
             
Investments in associates   $ 1,468,242     $ 36,789,760     $ 1,121,981  
Investments in joint ventures     -       613,841       18,720  
                         
    $ 1,468,242     $ 37,403,601     $ 1,140,701  

 

a. Investments in associates

 

1) Investments in associates accounted for using the equity method consisted of the following:

 

            Carrying Amount as of December 31
            2014   2015
            NT$   NT$   US$
Name of Associate   Main Business   Operating Location           (Note 4)
                     
Material associate                    
Siliconware Precision Industries Co., Ltd. (“SPIL”)   Engaged in assembly, testing and turnkey services of integrated circuits   ROC   $ -     $ 35,423,058     $ 1,080,301  
Associates that are not individually material                                
Hung Ching Development & Construction Co. (“HC”)   Engaged in the development, construction and leasing of real estate properties   ROC     1,327,201       1,294,191       39,469  
Hung Ching Kwan Co. (“HCK”)   Engaged in the leasing of real estate properties   ROC     342,138       332,444       10,139  
Advanced Microelectronic Products Inc. (“AMPI”)   Engaged in integrated circuit   ROC     99,052       40,216       1,226  
              1,768,391       37,089,909       1,131,135  
    Less:   Deferred gain on transfer of land         300,149       300,149       9,154  
                                 
            $ 1,468,242     $ 36,789,760     $ 1,121,981  

 

2) At each balance sheet date, the percentages of ownership held by the Group were as follows:

 

    December 31
    2014   2015
         
SPIL     -       24.99 %
HC     26.22 %     26.22 %
AMPI     18.24 %     18.24 %
HCK     27.31 %     27.31 %

 

3) In September 2015, the Company acquired 725,749 thousand ordinary shares and 10,650 thousand units of ADS (one ADS represents five ordinary shares) of SPIL at NT$45 (US$1.37) per ordinary share. The percentage of ownership was 24.99% and, as a result, the Company obtained significant influence over SPIL. As of December 31, 2015, the Company has not completed the purchase price allocation for the difference between the cost of the investment and the Company’s share of the net fair value of SPIL’s identifiable assets and liabilities.

 

In December 2015, the Company’s board of directors resolved to purchase additional ordinary shares (including ordinary shares represented by ADS) of SPIL up to 770,000 thousand shares, accounting for approximately 24.71% of the outstanding ordinary shares of SPIL, through a tender offer for a consideration of NT$55 (US$1.68) per ordinary share and NT$275 (US$8.39) per ADS from December 29, 2015 to February 16, 2016, which was then extended to March 17, 2016. As of March 17, 2016, as the Fair Trade Commission of the ROC had not yet approved the combination between the Company and SPIL, the condition to complete the tender offer was not satisfied. The second offer to purchase SPIL’s ordinary shares from whom had participated in the tender offer was withdrawn.

 

F- 39

In March and April 2016, the Company acquired additional 209,848 thousand ordinary shares and additional 9,690 thousand units of ADS of SPIL with a total consideration of NT$13,735,498 thousand (US$418,893 thousands). As of April 28, 2016, the Company owns 33.29% of the outstanding ordinary shares of SPIL.

 

4) In January 2014, the Company acquired additional ordinary shares of AMPI in a private placement and, as a result, obtained significant influence over AMPI. The private-placement ordinary shares were restricted for disposal during a 3-year lock-up period.

 

5) Fair values (Level 1 inputs in terms of IFRS 13) of investments in associates with available published price quotation are summarized as follows:

 

    December 31
    2014   2015
    NT$   NT$   US$
(Note 4)
             
SPIL   $ -     $ 40,741,700     $ 1,242,504  
HC   $ 1,427,499     $ 1,149,549     $ 35,058  
AMPI   $ 184,862     $ 104,255     $ 3,179  

 

6) Summarized financial information in respect of the Group’s material associate is set out below. The summarized financial information below represents amounts shown in SPIL’s consolidated financial statements prepared in accordance with IFRSs as issued by the IASB adjusted by the Group for equity method accounting purposes.

 

    December 31, 2015
    NT$   US$
(Note 4)
         
Current assets   $ 48,785,212     $ 1,487,808  
Non-current assets     74,424,040       2,269,717  
Current liabilities     (30,677,239 )     (935,567 )
Non-current liabilities     (23,002,788 )     (701,518 )
                 
Equity   $ 69,529,225     $ 2,120,440  
                 
Proportion of the Group’s ownership interest in SPIL     24.99 %     24.99 %
                 
Net assets attributable to the Group   $ 17,375,353     $ 529,898  
The difference between investment cost and net assets     18,047,705       550,403  
                 
Carrying amount of the Group’s ownership interest in SPIL   $ 35,423,058     $ 1,080,301  

 

   

For the Year Ended

December 31, 2015

    NT$   US$
(Note 4)
         
Operating revenue   $ 82,839,922     $ 2,526,378  
Gross profit   $ 21,609,300     $ 659,021  
Profit before income tax   $ 10,377,522     $ 316,484  
                 
Net profit for the year   $ 9,011,463     $ 274,824  
Other comprehensive loss for the year     (906,776 )     (27,655 )
                 
Total comprehensive income for the year   $ 8,104,687     $ 247,169  

 

F- 40

7) Aggregate information of associates that are not individually material

 

    For the Years Ended December 31
    2013   2014   2015
    NT$   NT$   NT$   US$
                (Note 4)
The Group’s share of:                
Net profit for the year   $ 76,783     $ 133,929     $ 120,749     $ 3,683  
Other comprehensive income (loss) for the year     56,485       234,125       (2,916 )     (89 )
                                 
Total comprehensive income for the year   $ 133,268     $ 368,054     $ 117,833     $ 3,594  

 

b. Investments in joint ventures

 

1) Investment in joint ventures that are not individually material accounted for using the equity method consisted of the following:

 

            December 31, 2015
Name of Joint Venture   Main Business  

Operating

Location

 

Percentages of

Ownership

  Carrying Amount
                NT$   US$
                    (Note 4)
                     
ASE Embedded Electronics Inc. (“ASEEE”)   Engaged in the production of embedded substrate   ROC     51.00 %   $ 613,841     $ 18,720  

 

 

 

In May 2015, the Group and TDK Corporation (“TDK”) entered into an agreement to establish a joint venture to invest in ASEEE. In August 2015, the Croup invested NT$618,097 thousand (US$18,850 thousand) for 51.00% shareholding in ASEEE. According to the joint arrangement, the Group and TDK must act together to direct the relevant operating activities and, as a result, the Group does not control ASEEE. The investment in ASEEE is accounted for using the equity method.

 

2) Aggregate information of joint venture that is not individually material

 

   

For the Year Ended

December 31, 2015

    NT$   US$
(Note 4)
         
The Group’s share of:        
Net loss for the year   $ (4,274 )   $ (130 )
Other comprehensive income for the year     -       -  
                 
Total comprehensive loss for the year   $ (4,274 )   $ (130 )

 

Investments accounted for using the equity method and the share of loss and other comprehensive income of those investments were calculated based on the audited financial statements prepared in accordance with IFRSs as issued by the IASB.

 

13. PROPERTY, PLANT AND EQUIPMENT

 

The carrying amounts of each class of property, plant and equipment were as follows:

 

F- 41

    December 31
    2014   2015
    NT$   NT$   US$ (Note 4)
             
Land   $ 3,348,018     $ 3,381,300     $ 103,120  
Buildings and improvements     56,395,710       59,801,054       1,823,758  
Machinery and equipment     84,171,647       78,715,309       2,400,589  
Other equipment     1,816,687       1,814,994       55,352  
Construction in progress and machinery in transit     5,855,053       6,284,418       191,657  
                         
    $ 151,587,115     $ 149,997,075     $ 4,574,476  

 

For the year ended December 31, 2013

 

    Land   Buildings and improvements   Machinery and equipment   Other equipment  

Construction in progress and machinery

in transit

  Total
    NT$   NT$   NT$   NT$   NT$   NT$
                         
Cost                        
                         
Balance at January 1, 2013   $ 3,274,086     $ 63,482,739     $ 193,973,968     $ 5,941,567     $ 8,178,827     $ 274,851,187  
Additions     -       5,447,913       14,484,611       318,841       6,792,707       27,044,072  
Disposals     -       (412,648 )     (9,479,630 )     (197,203 )     (38,565 )     (10,128,046 )
Reclassification     -       758,850       7,661,570       142,791       (8,638,840 )     (75,629 )
Acquisitions through business combinations     -       5,106       278,862       122,108       -       406,076  
Effect of foreign currency exchange differences     21,672       1,311,577       1,432,524       56,485       715,573       3,537,831  
                                                 
Balance at December 31, 2013   $ 3,295,758     $ 70,593,537     $ 208,351,905     $ 6,384,589     $ 7,009,702     $ 295,635,491  
                                                 
Accumulated depreciation and impairment                                                
                                                 
Balance at January 1, 2013   $ -     $ 22,307,146     $ 120,775,451     $ 4,570,816     $ -     $ 147,653,413  
Depreciation expense     -       3,555,865       20,486,896       653,846       -       24,696,607  
Impairment losses recognized (reversed)     -       (15,754 )     508,894       2,407       -       495,547  
Disposals     -       (368,707 )     (9,285,927 )     (166,371 )     -       (9,821,005 )
Reclassification     -       (24,797 )     58,448       (45,735 )     -       (12,084 )
Acquisitions through business combinations     -       2,473       108,365       36,818       -       147,656  
Effect of foreign currency exchange differences     -       370,710       614,596       (7,280 )     -       978,026  
                                                 
Balance at December 31, 2013   $ -     $ 25,826,936     $ 133,266,723     $ 5,044,501     $ -     $ 164,138,160  

 

For the year ended December 31, 2014

 

    Land   Buildings and improvements   Machinery and equipment   Other equipment  

Construction in progress and machinery

in transit

  Total
    NT$   NT$   NT$   NT$   NT$   NT$
                         
Cost                        
                         
Balance at January 1, 2014   $ 3,295,758     $ 70,593,537     $ 208,351,905     $ 6,384,589     $ 7,009,702     $ 295,635,491  
Additions     -       1,246,123       1,140,822       572,766       40,488,876       43,448,587  
Disposals     -       (299,515 )     (8,188,532 )     (447,047 )     (56,209 )     (8,991,303 )
Reclassification     -       12,683,476       27,935,525       395,115       (41,044,364 )     (30,248 )
Effect of foreign currency exchange differences     52,260       2,501,633       4,429,907       277,151       (535,788 )     6,725,163  
                                                 
Balance at December 31, 2014   $ 3,348,018     $ 86,725,254     $ 233,669,627     $ 7,182,574     $ 5,862,217     $ 336,787,690  
                                                 
Accumulated depreciation and impairment                                                
                                                 
Balance at January 1, 2014   $ -     $ 25,826,936     $ 133,266,723     $ 5,044,501     $ -     $ 164,138,160  
Depreciation expense     -       3,980,337       21,180,214       644,491       -       25,805,042  
Impairment losses recognized     -       79,124       211,466       -       7,164       297,754  
Disposals     -       (248,477 )     (7,786,216 )     (433,863 )     -       (8,468,556 )
Reclassification     -       7,459       (7,122 )     (7,907 )     -       (7,570 )
Effect of foreign currency exchange differences     -       684,165       2,632,915       118,665       -       3,435,745  
                                                 
Balance at December 31, 2014   $ -     $ 30,329,544     $ 149,497,980     $ 5,365,887     $ 7,164     $ 185,200,575  

 

F- 42

For the year ended December 31, 2015

 

    Land   Buildings and improvements   Machinery and equipment   Other equipment  

Construction in progress and machinery

in transit

  Total
    NT$   NT$   NT$   NT$   NT$   NT$
                         
Cost                        
                         
Balance at January 1, 2015   $ 3,348,018     $ 86,725,254     $ 233,669,627     $ 7,182,574     $ 5,862,217     $ 336,787,690  
Additions     -       132,584       553,496       401,417       27,193,324       28,280,821  
Disposals     -       (405,040 )     (8,041,933 )     (232,555 )     (20,711 )     (8,700,239 )
Reclassification     -       8,579,472       18,054,712       389,783       (26,893,158 )     130,809  
Effect of foreign currency exchange differences     33,282       (584,338 )     (952,295 )     (18,811 )     256,088       (1,266,074 )
                                                 
Balance at December 31, 2015   $ 3,381,300     $ 94,447,932     $ 243,283,607     $ 7,722,408     $ 6,397,760     $ 355,233,007  
                                                 
Accumulated depreciation and impairment                                                
                                                 
Balance at January 1, 2015   $ -     $ 30,329,544     $ 149,497,980     $ 5,365,887     $ 7,164     $ 185,200,575  
Depreciation expense     -       4,790,646       23,372,408       775,716       -       28,938,770  
Impairment losses recognized     -       120,424       31,116       -       106,589       258,129  
Disposals     -       (308,895 )     (7,838,937 )     (224,509 )     -       (8,372,341 )
Reclassification     -       5,704       (11,920 )     3,008       -       (3,208 )
Effect of foreign currency exchange differences     -       (290,545 )     (482,349 )     (12,688 )     (411 )     (785,993 )
                                                 
Balance at December 31, 2015   $ -     $ 34,646,878     $ 164,568,298     $ 5,907,414     $ 113,342     $ 205,235,932  

 

    Land   Buildings and improvements   Machinery and equipment   Other equipment  

Construction in progress and machinery

in transit

  Total
    US$ (Note 4)   US$ (Note 4)   US$ (Note 4)   US$ (Note 4)   US$ (Note 4)   US$ (Note 4)
                         
Cost                        
                         
Balance at January 1,2015   $ 102,105     $ 2,644,869     $ 7,126,247     $ 219,048     $ 178,781     $ 10,271,050  
Additions     -       4,043       16,880       12,242       829,318       862,483  
Disposals     -       (12,353 )     (245,256 )     (7,092 )     (632 )     (265,333 )
Reclassification     -       261,649       550,616       11,887       (820,163 )     3,989  
Effect of foreign currency exchange differences     1,015       (17,821 )     (29,042 )     (574 )     7,810       (38,612 )
                                                 
Balance at December 31, 2015   $ 103,120     $ 2,880,387     $ 7,419,445     $ 235,511     $ 195,114     $ 10,833,577  
                                                 
Accumulated depreciation and impairment                                                
                                                 
Balance at January 1, 2015   $ -     $ 924,963     $ 4,559,255     $ 163,644     $ 218     $ 5,648,080  
Depreciation expense     -       146,101       712,791       23,657       -       882,549  
Impairment losses recognized     -       3,673       949       -       3,251       7,873  
Disposals     -       (9,420 )     (239,065 )     (6,847 )     -       (255,332 )
Reclassification     -       174       (364 )     92       -       (98 )
Effect of foreign currency exchange differences     -       (8,862 )     (14,710 )     (387 )     (12 )     (23,971 )
                                                 
Balance at December 31,2015   $ -     $ 1,056,629     $ 5,018,856     $ 180,159     $ 3,457     $ 6,259,101  

 

Due to the Group’s operation plans and production demands, the Group believed that a portion of property, plant and equipment used in packaging segment, testing segment, EMS segment and other segment was not used and recognized an impairment loss of NT$495,547 thousand, NT$297,754 thousand and NT$258,129 thousand (US$7,873 thousand) under the line item of other income and expenses in the consolidated statements of comprehensive income for the years ended December 31, 2013, 2014 and 2015, respectively. The recoverable amount of a portion of the impaired property, plant and equipment is determined by its fair value less costs of disposal, of which the fair value is based on the recent quoted prices of assets with similar age and obsolescence that provided by the vendors in secondary market. The recent quoted prices of assets are a Level 3 input in terms of IFRS 13 because the secondary market is not very active. The recoverable amount of the other portion of the impaired property, plant and equipment for the years ended December 31, 2013, 2014 and 2015 is determined on the basis of its value in use which was zero due to the Group’s expectation to derive no cash flows from these assets.

 

Each class of property, plant and equipment was depreciated on a straight-line basis over the following useful lives:

 

F- 43

 

Buildings and improvements    
Main plant buildings   10-40 years
Cleanrooms   10-20 years
Others   3-20 years
Machinery and equipment   2-10 years
Other equipment   2-20 years

 

The capitalized borrowing costs for the years ended December 31, 2013, 2014 and 2015 are disclosed in Note 22.

 

14. GOODWILL

 

    Cost   Accumulated impairment   Carrying amount
    NT$   NT$   NT$
             
Balance at January 1, 2013   $ 12,295,819     $ 1,988,996     $ 10,306,823  
Effect of foreign currency exchange differences     40,997       -       40,997  
                         
Balance at December 31, 2013     12,336,816       1,988,996       10,347,820  
Effect of foreign currency exchange differences     97,595       -       97,595  
                         
Balance at December 31, 2014     12,434,411       1,988,996       10,445,415  
Effect of foreign currency exchange differences     61,104       -       61,104  
                         
Balance at December 31, 2015   $ 12,495,515     $ 1,988,996     $ 10,506,519  

 

    Cost   Accumulated impairment   Carrying amount
    US$ (Note 4)   US$ (Note 4)   US$ (Note 4)
             
Balance at January 1, 2015   $ 379,214     $ 60,659     $ 318,555  
Effect of foreign currency exchange differences     1,863       -       1,863  
                         
Balance at December 31, 2015   $ 381,077     $ 60,659     $ 320,418  

 

a. Allocating goodwill to cash-generating units

 

Goodwill had been allocated to the following cash-generating units for impairment testing purposes: packaging segment, testing segment, EMS segment and other segment. The carrying amount of goodwill allocated to cash-generating units was as follows:

 

    December 31
    2014   2015
Cash-generating units   NT$   NT$   US$ (Note 4)
             
Testing segment   $ 7,846,460     $ 7,890,525     $ 240,638  
Others     2,598,955       2,615,994       79,780  
                         
    $ 10,445,415     $ 10,506,519     $ 320,418  

 

F- 44

b. Impairment assessment

 

At the end of each year, the Group performs impairment assessment by reviewing the recoverable amounts based on value in use which incorporates cash flow projections covering a five-year period. The cash flows beyond that five-year period have been extrapolated using a steady 2% per annum growth rate. In assessing value in use, the estimated future cash flows are discounted to their present value using annual discount rates. For the years ended December 31, 2013, 2014 and 2015, the Group did not recognize impairment loss on goodwill.

 

The key assumptions used in the value in use calculations are growth rates for operating revenue and discount rates. Growth rates for operating revenue are based on the revenue forecast for the Group and the market as well as our historical experience. The discount rates were 9.56%-11.80%, 9.70%-11.50% and 8.67%- 10.71% as of December 31, 2013, 2014 and 2015, respectively

 

Management believed that any reasonably possible change in the key assumptions on which recoverable amount was based would not cause the aggregate carrying amount of the cash-generating unit to exceed its aggregate recoverable amount significantly.

 

15. OTHER INTANGIBLE ASSETS

 

The carrying amounts of each class of other intangible assets were as follows:

 

    December 31
    2014   2015
    NT$   NT$   US$ (Note 4)
             
Customer relationships   $ 501,501     $ 274,402     $ 8,368  
Computer software     798,127       953,322       29,074  
Others     168,243       154,369       4,708  
                         
    $ 1,467,871     $ 1,382,093     $ 42,150  

 

For the year ended December 31, 2013

 

    Customer relationships   Computer software   Others   Total
    NT$   NT$   NT$   NT$
                 
Cost                
                 
Balance at January 1, 2013   $ 1,579,015     $ 3,354,834     $ 2,299,958     $ 7,233,807  
Additions     -       306,795       6,315       313,110  
Disposals or derecognization     -       (6,022 )     (5,272 )     (11,294 )
Reclassification     -       (8,684 )     -       (8,684 )
Acquisitions through business combinations     -       3,508       -       3,508  
Effect of foreign currency exchange differences     -       29,404       3,654       33,058  
                                 
Balance at December 31, 2013   $ 1,579,015     $ 3,679,835     $ 2,304,655     $ 7,563,505  

 

(Continued)

 

F- 45

    Customer relationships   Computer software   Others   Total
    NT$   NT$   NT$   NT$
                 
Accumulated amortization                
                 
Balance at January 1, 2013   $ 776,600     $ 2,738,397     $ 1,664,364     $ 5,179,361  
Amortization expense     147,594       256,147       370,563       774,304  
Disposals or derecognization     -       (6,022 )     (5,272 )     (11,294 )
Reclassification     -       25       -       25  
Acquisitions through business combinations     -       688       -       688  
Effect of foreign currency exchange differences     -       13,593       1,004       14,597  
                                 
Balance at December 31, 2013   $ 924,194     $ 3,002,828     $ 2,030,659     $ 5,957,681  

 

(Concluded)

 

For the year ended December 31, 2014

 

    Customer relationships   Computer software   Others   Total
    NT$   NT$   NT$   NT$
                 
Cost                
                 
Balance at January 1, 2014   $ 1,579,015     $ 3,679,835     $ 2,304,655     $ 7,563,505  
Additions     -       375,623       20,843       396,466  
Disposals or derecognization     -       (1,232,757 )     (6,406 )     (1,239,163 )
Reclassification     -       6,228       -       6,228  
Effect of foreign currency exchange differences     -       54,002       4,456       58,458  
                                 
Balance at December 31, 2014   $ 1,579,015     $ 2,882,931     $ 2,323,548     $ 6,785,494  
                                 
Accumulated amortization                                
                                 
Balance at January 1, 2014   $ 924,194     $ 3,002,828     $ 2,030,659     $ 5,957,681  
Amortization expense     153,320       269,375       123,039       545,734  
Disposals or derecognization     -       (1,227,346 )     -       (1,227,346 )
Reclassification     -       2,516       -       2,516  
Effect of foreign currency exchange differences     -       37,431       1,607       39,038  
                                 
Balance at December 31, 2014   $ 1,077,514     $ 2,084,804     $ 2,155,305     $ 5,317,623  

 

For the year ended December 31, 2015

 

    Customer relationships   Computer software   Others   Total
    NT$   NT$   NT$   NT$
                 
Cost                
                 
Balance at January 1, 2015   $ 1,579,015     $ 2,882,932     $ 2,323,547     $ 6,785,494  
Additions     -       481,412       9,723       491,135  
Disposals or derecognization     (663,379 )     (8,426 )     (1,984,118 )     (2,655,923 )
Reclassification     -       12,360       -       12,360  

 

(Continued)

 

F- 46

    Customer relationships   Computer software   Others   Total
    NT$   NT$   NT$   NT$
                 
Effect of foreign currency exchange differences   $ -     $ (29,918 )   $ (1,732 )   $ (31,650 )
                                 
Balance at December 31, 2015   $ 915,636     $ 3,338,360     $ 347,420     $ 4,601,416  
                                 
Accumulated amortization                                
                                 
Balance at January 1, 2015   $ 1,077,514     $ 2,084,804     $ 2,155,305     $ 5,317,623  
Amortization expense     227,099       325,856       26,939       579,894  
Disposals or derecognization     (663,379 )     (7,402 )     (1,983,914 )     (2,654,695 )
Reclassification     -       3,190       -       3,190  
Effect of foreign currency exchange differences     -       (21,410 )     (5,279 )     (26,689 )
                                 
Balance at December 31, 2015   $ 641,234     $ 2,385,038     $ 193,051     $ 3,219,323  

 

(Concluded)

 

    Customer relationships   Computer software   Others   Total
    US$ (Note 4)   US$ (Note 4)   US$ (Note 4)   US$ (Note 4)
                 
Cost                
                 
Balance at January 1, 2015   $ 48,155     $ 87,921     $ 70,861     $ 206,937  
Additions     -       14,682       297       14,979  
Disposals or derecognization     (20,231 )     (257 )     (60,510 )     (80,998 )
Reclassification     -       377       -       377  
Effect of foreign currency exchange differences     -       (912 )     (53 )     (965 )
                                 
Balance at December 31, 2015   $ 27,924     $ 101,811     $ 10,595     $ 140,330  
                                 
Accumulated amortization                                
                                 
Balance at January 1, 2015   $ 32,861     $ 63,580     $ 65,731     $ 162,172  
Amortization expense     6,926       9,938       821       17,685  
Disposals or derecognization     (20,231 )     (226 )     (60,503 )     (80,960 )
Reclassification     -       97       -       97  
Effect of foreign currency exchange differences     -       (652 )     (162 )     (814 )
                                 
Balance at December 31, 2015   $ 19,556     $ 72,737     $ 5,887     $ 98,180  

 

Each class of other intangible assets, except a portion of customer relationships amortized based on the pattern in which the economic benefits are consumed, were amortized on the straight-line basis over the following useful lives:

 

Customer relationships     11 years  
Computer software     2-5 years  
Others     5-32 years

  

F- 47

16. LONG-TERM PREPAYMENTS FOR LEASE

 

Long-term prepayments for lease mainly represent land use right located in China with periods for use from 50 to 70 years. As of December 31, 2014 and 2015, the carrying amount of the land use right which the Group was in the process of obtaining the certificates was NT$17,594 thousand and nil, respectively. During 2014, the land use right located in China which the Group obtained the certificates was reclassified from long-term prepayments for lease to construction in progress under inventories related to real estate business.

 

17. BORROWINGS

 

a. Short-term borrowings

 

Short-term borrowings mainly represented unsecured revolving bank loans with annual interest rates at 0.81%-6.00% and 0.57%-5.78% as of December 31, 2014 and 2015, respectively.

 

b. Short-term bills payable

 

Short-term bills payable outstanding as of December 31, 2015 represented commercial papers NT$4,350,000 thousand (US$132,662 thousand) less unamortized discounts of NT$1,946 thousand (US$59 thousand) with annual interest rate at 0.78%. The commercial papers were secured by China Bills Finance Corporation and Mega Bills Finance Corporation.

 

c. Long-term borrowings

 

1) Bank loans

 

As of December 31, 2014 and 2015, the long-term bank loans with fixed interest rates were NT$1,192,975 thousand and NT$1,500,000 thousand (US$45,746 thousand), respectively, with annual interest rates at 1.10%-6.15% and 1.17%, respectively. The long-term bank loans with fixed interest rate will be repayable in December 2018. As of December 31, 2014 and 2015, the current portion of long-term bank loans with fixed interest rates were NT$116,876 thousand and nil, respectively. The others were long-term bank loans with floating interest rate and consisted of the followings:

 

    December 31
    2014   2015
    NT$   NT$   US$ (Note 4)
             
Working capital bank loans            
Syndicated bank loans - repayable through April 2016 to July 2018, annual interest rates were 0.90%-1.83% and 1.56%-1.92% as of December 31, 2014 and 2015, respectively   $ 10,760,548     $ 12,159,037     $ 370,816  
Others - repayable through June 2016 to August 2019, annual interest rates were 1.03%-3.74% and 0.90%-3.98% as of December 31, 2014 and 2015, respectively     12,479,650       25,660,638       782,575  

 

 

(Continued)

 

F- 48

    December 31
    2014   2015
    NT$   NT$   US$ (Note 4)
             
Mortgage loans            
Repayable through July 2016 to June 2023, annual interest rates were 6.77% and 4.95%-5.39% as of December 31, 2014 and 2015, respectively   $ 2,534,483     $ 3,251,139     $ 99,150  
      25,774,681       41,070,814       1,252,541  
Less:  unamortized arrangement fee     32,225       18,670       569  
      25,742,456       41,052,144       1,251,972  
Less:  current portion     2,714,131       2,057,465       62,747  
                         
    $ 23,028,325     $ 38,994,679     $ 1,189,225  

 

(Concluded)

 

Pursuant to the above syndicated bank loans agreements, the Company and some of its subsidiaries should maintain certain financial covenants including current ratio, leverage ratio, tangible net assets and interest coverage ratio. Such financial ratios are calculated based on the Group’s annual audited consolidated financial statements or semi-annual reviewed consolidated financial statements or subsidiaries’ annual audited financial statements under local GAAP. The Company and its subsidiaries were in compliance with all of the loan covenants as of December 31, 2014 and 2015.

 

The Group had sufficient long term credit facility obtained before December 31, 2015 to refinance a portion of loans on a long-term basis. Therefore, NT$2,105,883 thousand (US$64,223 thousand) was not classified as current portion of long-term borrowings as of December 31, 2015.

 

2) Bills payable

 

Long-term bills payable represented unsecured commercial paper NT$2,000,000 thousand (US$60,994 thousand) less unamortized discounts of NT$1,011 thousand (US$31 thousand) with annual interest rate at 1.03% as of December 31, 2015. The commercial paper contract was entered into with Ta Ching Bills Finance Corporation and the duration is 3 years.

 

18. BONDS PAYABLE

 

    December 31
    2014   2015
    NT$   NT$   US$ (Note 4)
             
Secured domestic bonds - secured by banks            
Repayable at maturity in August 2016 and interest due annually with annual interest rate 1.45%   $ 8,000,000     $ 8,000,000     $ 243,977  
Unsecured convertible overseas bonds                        
US$400,000 thousand     12,660,000       13,130,000       400,427  
US$200,000 thousand (linked to New Taiwan dollar)     -       6,185,600       188,643  

 

(Continued)

F- 49

    December 31
    2014   2015
    NT$   NT$   US$ (Note 4)
             
Secured overseas bonds - secured by the Company            
US$300,000 thousand, repayable at maturity in July 2017; interest due semi-annually with annual interest rate 2.125%   $ 9,495,000     $ 9,847,500     $ 300,320  
CNY500,000 thousand, repayable at maturity in September 2016 and interest due semi-annually with annual interest rate 4.25%     2,586,207       2,527,489       77,081  
      32,741,207       39,690,589       1,210,448  
Less:  discounts on bonds payable     1,471,076       1,264,339       38,559  
      31,270,131       38,426,250       1,171,889  
Less:  current portion     -       14,685,866       447,876  
                         
    $ 31,270,131     $ 23,740,384     $ 724,013  

(Concluded)

 

The Group had sufficient long term credit facility obtained before December 31, 2015 to refinance a portion of the bonds payable on a long-term basis. Therefore, NT$8,000,000 thousand (US$243,977 thousand) was not classified as current portion of bonds payable as of December 31, 2015.

 

a. In September 2013, the Company offered the third unsecured convertible overseas bonds (the “Bonds”) in US$400,000 thousand. The Bonds is zero coupon bonds with the maturity of 5 years, in denominations of US$200 thousand or in any integral multiples thereof. Each holder of the Bonds has the right at any time on or after October 16, 2013 and up to (and including) August 26, 2018, except during legal lock-up period, to convert the Bonds into newly issued listed common shares at the conversion price NT$33.085, determined on the basis of a fixed exchange rate of US$1 to NT$29.956. The conversion price will be adjusted in accordance with the conversion provisions due to anti-dilution clause. As of December 31, 2014 and 2015, the conversion price was NT$31.93 and NT$30.28 (US$0.92), respectively.

 

The Bonds may be redeemed at the option of the Company, in whole or in part, at any time on or after the third anniversary of the offering date provided that (1) the closing price, translated into U.S. dollars, of the common shares for a period of 20 consecutive trading days is at least 130% of the conversion price, (2) at least 90% in aggregate principal amount of the Bonds originally outstanding has been redeemed, repurchased and canceled or converted, or (3) the Company is required to pay additional taxes on the Bonds as a result of certain changes in tax laws in the ROC.

 

Each holder shall have the right to request the Company repurchase all or any portion of the principal amount thereof of a holder’s Bonds (1) on the third anniversary of the offering date, (2) in the event of a change of control, or (3) in the event of delisting.

 

The Bonds contained a debt host contract, recognized as bonds payable, and the conversion option, redemption option and put option (collectively the “Bonds Options”) aggregately recognized as financial liabilities at FVTPL. The effective interest rate of the debt host contract was 3.16% and the aggregate fair value of the Bonds Options was NT$1,667,950 thousand on initial recognition.

 

b. In July 2015, the Company offered the forth unsecured convertible overseas bonds (the “Currency Linked Bonds”) in US$200,000 thousand. The Currency Linked Bonds is zero coupon bonds with the maturity of 2.75 years, in denominations of US$200 thousand or in any integral multiples thereof. Repayment, redemption and put amount denominated in U.S. dollar will be converted into New Taiwan dollar amount using a fixed exchange rate of US$1 to NT$30.928 (the “Fixed Exchange Rate”) and then

 

F- 50

converted back to U.S. dollar amount using the applicable prevailing rate at the time of repayment, redemption or put. Each holder of the Currency Linked Bonds has the right at any time on or after August 11, 2015 and up to (and including) March 17, 2018, except during legal lock-up period, to convert the Currency Linked Bonds into common shares at the conversion price NT$54.55, determined on the basis of the Fixed Exchange Rate. The Company’s treasury shares will be available for delivery upon conversion of the Currency Linked Bonds. The conversion price will be adjusted in accordance with the conversion provisions due to anti-dilution clause. As of December 31, 2015, the conversion price was NT$51.73 (US$1.58).

 

The Currency Linked Bonds may be redeemed at the option of the Company, in whole or in part, at any time on or after March 19, 2018 provided that (1) the closing price, translated into U.S. dollars, of the common shares for a period of 20 out of 30 consecutive trading days is at least 130% of the conversion price, (2) at least 90% in aggregate principal amount of the Currency Linked Bonds originally outstanding has been redeemed, repurchased and canceled or converted, or (3) the Company is required to pay additional taxes on the Currency Linked Bonds as a result of certain changes in tax laws in the ROC.

 

Each holder shall have the right to request the Company repurchase all or any portion of the principal amount thereof of a holder’s Currency Linked Bonds (1) in the event of a change of control, or (2) in the event of delisting.

 

The Currency Linked Bonds contained a debt host contract, recognized as bonds payable, and the conversion option, recognized as capital surplus. The effective interest rate of the debt host contract was 1.58% and the fair value of the conversion option was NT$214,022 thousand (US$6,527 thousand) on initial recognition.

 

c. To focus on corporate sustainability and to carry out the commitment to environmental protection and energy conservation, Anstock II Limited, a subsidiary the Company 100% owned, offered overseas bonds in US$300,000 thousand with the maturity of 3 years and annual interest rate of 2.125% (the “Green Bonds”) in July 2014. The Green Bonds are unconditionally and irrevocably guaranteed by the Company and the proceeds will be used to fund certain eligible projects to promote the Group’s transition to low-carbon and climate resilient growth.

 

19. OTHER PAYABLES

 

    December 31
    2014   2015
    NT$   NT$   US$ (Note 4)
             
Payables for property, plant and equipment   $ 7,097,129     $ 4,782,357     $ 145,848  
Accrued salary and bonus     5,550,040       5,826,982       177,706  
Accrued bonus to employees or employees’ compensation and remuneration to directors and supervisors     2,602,796       2,270,608       69,247  
Accrued employee insurance     572,259       599,218       18,274  
Accrued utilities     495,404       466,956       14,241  
Accrued legal settlement fee     814,185       -       -  
Others     5,232,703       5,248,697       160,070  
                         
    $ 22,364,516     $ 19,194,818     $ 585,386  

 

The Company and its subsidiary, ASE US, reached the final settlement agreement with Tessera Inc. (“Tessera”) in October 2014 to resolve the patent infringement lawsuit, and Tessera has dismissed all claims against the Company and ASE US. The final settlement amount was NT$814,185 thousand (US$27,000 thousand as resolved in the final settlement agreement in October 2014) and paid in January 2015.

 

F- 51

20. RETIREMENT BENEFIT PLANS

 

a. Defined contribution plans

 

1) The pension plan under the ROC Labor Pension Act (“LPA”) for the Group’s ROC resident employees is a government-managed defined contribution plan. Based on the LPA, the Company and its subsidiaries in Taiwan makes monthly contributions to employees’ individual pension accounts at 6% of their monthly salaries.

 

2) The subsidiaries located in China, U.S.A., Malaysia, Singapore and Mexico also make contributions at various ranges according to relevant local regulations.

 

b. Defined benefit plans

 

1) The Company and its subsidiaries in Taiwan joined the defined benefit pension plan under the ROC Labor Standards Law (“LS Law”) operated by the government. Pension benefits are calculated on the basis of the length of service and average monthly salaries of the last six months before retirement. The Company and its subsidiaries in Taiwan make contributions based on a certain percentage of their domestic employees monthly salaries to a pension fund administered by the pension fund monitoring committee. Pension contributions are deposited in the Bank of Taiwan in the committee’s name and are managed by the Bureau of Labor Funds, Ministry of Labor (“the Bureau”); the Group has no right to influence the investment policy and strategy. Before the end of each year, the Group assesses the balance in the pension fund. If the amount of the balance in the pension fund is inadequate to pay retirement benefits for employees who conform to retirement requirements in the next year, the Group is required to fund the difference in one appropriation that should be made before the end of March of the next year.

 

2) ASE Japan has a pension plan under which eligible employees with more than ten years of service are entitled to receive pension benefits based on their length of service and salaries at the time of termination of employment. ASE Japan makes contributions based on a certain amount of pension cost to employees.

 

ASE Korea also has a pension plan under which eligible employees and directors with more than one year of service are entitled to receive a lump-sum payment upon termination of their service with ASE Korea, based on their length of service and salaries at the time of termination. ASE Korea makes contributions based on a certain percentage of pension cost to an external financial institution administered by the management and in the names of employees.

 

3) ASE Inc., ASE Test, Inc. and ASE Electronics Inc. maintain pension plans for executive managers. Pension costs under the plans were NT$4,950 thousand, NT$16,645 thousand and NT$2,302 thousand (US$70 thousand) for the years ended December 31, 2013, 2014 and 2015, respectively. Pension payments were NT$2,666 thousand, NT$25,315 thousand and NT$2,549 thousand (US$78 thousand) for the years ended December 31, 2013, 2014 and 2015, respectively. As of December 31, 2014 and 2015, accrued pension liabilities for executive managers were NT$199,842 thousand and NT$199,595 thousand (US$6,087 thousand), respectively.

 

4) The present value of the defined benefit obligation and the related current service cost and past service cost were measured using the Projected Unit Credit Method.

 

Except the pension plans for executive managers, the key assumptions used for the actuarial valuations were as follow:

 

 

F- 52

 

      December 31
      2014       2015  
                 
Discount rates     0.12%-4.03%       0.15%-3.48%  
Expected rates of salary increase     2.00%-4.70%       2.00%-4.57%  

 

5) An analysis by function of the amounts recognized in profit or loss in respect of the defined benefit plans excluding those for executive managers was as follows:

 

    For the Years Ended December 31
    2013   2014   2015
    NT$   NT$   NT$   US$ (Note 4)
                 
Operating cost   $ 337,069     $ 345,309     $ 319,151     $ 9,733  
Selling and marketing expenses     10,181       11,448       10,160       310  
General and administrative expenses     43,381       35,867       43,753       1,334  
Research and development expenses     34,797       36,526       38,124       1,163  
                                 
    $ 425,428     $ 429,150     $ 411,188     $ 12,540  

    

     
6) For the years ended December 31, 2013, 2014 and 2015, the Group recognized actuarial gain of NT$345,519 thousand, actuarial loss of NT$4,260 thousand and actuarial loss of NT$51,909 thousand (US$1,583 thousand) in other comprehensive income (loss), respectively. As of December 31, 2014 and 2015, the accumulated actuarial loss of NT$332,947 thousand and NT$420,111 thousand (US$12,812 thousand) were recognized in other comprehensive income (loss), and NT$4,491 thousand and NT$7,931 thousand (US$242 thousand) were recognized in non-controlling interests, respectively.

 

7) The amounts included in the consolidated balance sheets arising from the Group’s obligation in respect of its defined benefit plans excluding those for executive managers were as follows:

 

    December 31
    2014   2015
    NT$   NT$   US$ (Note 4)
             
Present value of funded defined benefit obligation   $ 7,674,293     $ 7,973,676     $ 243,174  
Fair value of plan assets     (3,502,487 )     (3,973,729 )     (121,187 )
Present value of unfunded defined benefit obligation     4,171,806       3,999,947       121,987  
Recorded under others payables     (1,028 )     (138,959 )     (4,238 )
Recorded under prepaid pension cost     11,910       11,910       363  
                         
Net defined benefit liability   $ 4,182,688     $ 3,872,898     $ 118,112  

 


F- 53

Movements in net defined benefit liability (asset) were as follows:

 

    Present value of the defined benefit obligation   Fair value of the plan assets   Net defined benefit liability (asset)
    NT$   NT$   NT$
             
Balance at January 1, 2013   $ 7,751,862     $ (2,682,803 )   $ 5,069,059  
Service cost                        
Current service cost     347,629       -       347,629  
Net interest expense (income)     156,157       (78,358 )     77,799  
Recognized in profit or loss     503,786       (78,358 )     425,428  
                         
Remeasurement                        
Return on plan assets (excluding amounts included in net interest)     -       16,983       16,983  
Actuarial gain arising from changes in financial assumptions     (465,360 )     -       (465,360 )
Actuarial loss arising from experience adjustments     35,839       -       35,839  
Actuarial loss arising from changes in demographic assumptions     313       -       313  
Recognized in other comprehensive income     (429,208 )     16,983       (412,225 )
                         
Contributions from the employer     -       (470,592 )     (470,592 )
Benefits paid from the pension fund     (154,608 )     154,608       -  
Benefits paid from the Group     (99,025 )     -       (99,025 )
Exchange differences on foreign plans     (100,662 )     (58,642 )     (159,304 )
                         
Balance at December 31, 2013     7,472,145       (3,118,804 )     4,353,341  
Service cost                        
Current service cost     327,707       -       327,707  
Past service cost     22,036       -       22,036  
Net interest expense (income)     189,043       (109,636 )     79,407  
Recognized in profit or loss     538,786       (109,636 )     429,150  
                         
Remeasurement                        
Return on plan assets (excluding amounts included in net interest)     -       29,338       29,338  
Actuarial gain arising from changes in financial assumptions     (46,913 )     -       (46,913 )
Actuarial loss arising from experience adjustments     38,516       -       38,516  
Actuarial loss arising from changes in demographic assumptions     7,204       -       7,204  

(Continued)

 

F- 54

    Present value of the defined benefit obligation   Fair value of the plan assets   Net defined benefit liability (asset)
    NT$   NT$   NT$
             
Recognized in other comprehensive income   $ (1,193 )   $ 29,338     $ 28,145  
                         
Contributions from the employer     -       (556,555 )     (556,555 )
Benefits paid from the pension fund     (292,996 )     292,996       -  
Benefits paid from the Group     (16,237 )     -       (16,237 )
Exchange differences on foreign plans     (26,212 )     (39,826 )     (66,038 )
                         
Balance at December 31, 2014     7,674,293       (3,502,487 )     4,171,806  
Service cost                        
Current service cost     335,655       -       335,655  
Net interest expense (income)     183,889       (108,356 )     75,533  
Recognized in profit or loss     519,544       (108,356 )     411,188  
                         
Remeasurement                        
Return on plan assets (excluding amounts included in net interest)     -       12,426       12,426  
Actuarial loss arising from changes in financial assumptions     309,695       -       309,695  
Actuarial gain arising from experience adjustments     (243,363 )     -       (243,363 )
Actuarial gain arising from changes in demographic assumptions     (15,847 )     -       (15,847 )
Recognized in other comprehensive income     50,485       12,426       62,911  
                         
Contributions from the employer     -       (611,581 )     (611,581 )
Benefits paid from the pension fund     (192,928 )     192,928       -  
Benefits paid from the Group     (43,088 )     -       (43,088 )
Exchange differences on foreign plans     (34,630 )     43,341       8,711  
                         
Balance at December 31, 2015   $ 7,973,676     $ (3,973,729 )   $ 3,999,947  

(Concluded)

 

    Present value of the defined benefit obligation   Fair value of the plan assets   Net defined benefit liability (asset)
    US$ (Note 4)   US$ (Note 4)   US$ (Note 4)
                         
Balance at January 1, 2015   $ 234,044     $ (106,816 )   $ 127,228  

(Continued)

 

F- 55

    Present value of the defined benefit obligation   Fair value of the plan assets   Net defined benefit liability (asset)
    US$
(Note 4)
  US$
(Note 4)
  US$
(Note 4)
             
Service cost            
Current service cost   $ 10,237     $ -     $ 10,237  
Net interest expense (income)     5,608       (3,305 )     2,303  
Recognized in profit or loss     15,845       (3,305 )     12,540  
                         
Remeasurement                        
Return on plan assets (excluding amounts included in net interest)     -       379       379  
Actuarial loss arising from changes in financial assumptions     9,445       -       9,445  
Actuarial gain arising from experience adjustments     (7,422 )     -       (7,422 )
Actuarial gain arising from changes in demographic assumptions     (484 )     -       (484 )
Recognized in other comprehensive income     1,539       379       1,918  
                         
Contributions from the employer     -       (18,651 )     (18,651 )
Benefits paid from the pension fund     (5,884 )     5,884       -  
Benefits paid from the Group     (1,314 )     -       (1,314 )
Exchange differences on foreign plans     (1,056 )     1,322       266  
                         
Balance at December 31, 2015   $ 243,174     $ (121,187 )   $ 121,987  
                         
                      (Concluded)  

8) The fair value of the plan assets by major categories at each balance sheet date was as follows:

 

    December 31
    2014   2015
    NT$   NT$   US$ (Note 4)
             
Cash and cash equivalents   $ 1,854,926     $ 2,090,399     $ 63,751  
Debt instruments     691,720       1,020,532       31,123  
Equity instruments     869,752       823,496       25,114  
Others     86,089       39,302       1,199  
                         
Total   $ 3,502,487     $ 3,973,729     $ 121,187  

     
9) Through the defined benefit plans under the Labor Standards Law, the Company and its subsidiaries are exposed to the following risks:

 

a) Investment risk

 

The plan assets are invested in equity and debt securities, bank deposits, etc. The investment is conducted at the discretion of the Bureau or under the mandated management. However, in accordance with relevant regulations, the return generated by plan assets should not be below the interest rate for a 2-year time deposit with local banks.

 

F- 56

b) Interest risk

 

A decrease in the government bond interest rate will increase the present value of the defined benefit obligation; however, this will be partially offset by an increase in the return on the plan’s debt investments.

 

c) Salary risk

 

The present value of the defined benefit obligation is calculated by reference to the future salaries of plan participants. As such, an increase in the salary of the plan participants will increase the present value of the defined benefit obligation.

 

10) The management of ASE Korea is responsible for the administration of the fund and determination of the investment strategies according to related local regulations. ASE Korea is responsible for the shortfall between the fund and the defined benefit obligation. All of the plan assets are invested in the certificates of deposits.

 

11) Significant actuarial assumptions for the determination of the defined obligation excluding those for executive managers are discount rates and expected rates of salary increase. The sensitivity analysis below has been determined based on reasonably possible changes of the respective assumptions occurring at each balance sheet date, while holding all other assumptions constant.

 

    December 31
    2014   2015
    NT$   NT$   US$ (Note 4)
             
Discount Rate            
0.5% higher   $ (440,350 )   $ (444,132 )   $ (13,545 )
0.5% lower   $ 503,593     $ 497,046     $ 15,158  
Expected rates of salary increase                        
0.5% higher   $ 493,722     $ 476,378     $ 14,528  
0.5% lower   $ (430,706 )   $ (426,130 )   $ (12,996 )
                         

The sensitivity analysis presented above may not be representative of the actual change in the defined benefit obligation as it is unlikely that the change in assumptions would occur in isolation of one another as some of the assumptions may be correlated.

 

12) Maturity analysis of undiscounted pension benefit

 

    December 31
    2014   2015
    NT$   NT$   US$ (Note 4)
             
No later than 1 year   $ 249,000     $ 247,030     $ 7,534  
Later than 1 year and not later than 5 years     1,462,070       1,616,804       49,308  
Later than 5 years     14,468,022       17,674,518       539,021  
                         
    $ 16,179,092     $ 19,538,352     $ 595,863  
                         

The Group expects to make contributions of NT$705,384 thousand (US$21,512 thousand) to the defined benefit plans excluding those for executive managers in the next year starting from January 1, 2016.

 

F- 57

As of December 31, 2014 and 2015, the average duration of the defined benefit obligation excluding those for executive managers of the Group was 9 to 18 years and 8 to 16 years, respectively.

 

21. EQUITY

 

a. Share capital

 

Ordinary shares

 

   

December 31,

2014

 

December 31,

2015

         
Numbers of shares authorized (in thousands)     10,000,000       10,000,000  
                 
Numbers of shares reserved (in thousands)                
Employee share options     800,000       800,000  
                 
Numbers of shares registered (in thousands)     7,852,538       7,902,929  
Numbers of shares subscribed in advance (in thousands)     9,187       7,499  
                 
Number of shares issued and fully paid (in thousands)     7,861,725       7,910,428  
                 

 

   

December 31,

2014

 

December 31,

2015

    NT$   NT$   US$ (Note 4)
             
Share capital authorized   $ 100,000,000     $ 100,000,000     $ 3,049,710  
                         
Share capital reserved                        
Employee share options   $ 8,000,000     $ 8,000,000     $ 243,977  
                         
Share capital registered   $ 78,525,378     $ 79,029,290     $ 2,410,165  
Share capital subscribed in advance     189,801       156,370       4,769  
                         
Share capital issued   $ 78,715,179     $ 79,185,660     $ 2,414,934  
                         

The holders of issued ordinary shares with a par value at $10 per share are entitled the right to vote and receive dividends, except the shares held by the Group’s subsidiaries which are not entitled the right to vote. As of December 31, 2014 and 2015, there were 500,000 thousand ordinary shares included in the authorized shares that were not yet required to complete the share registration process.

 

In July 2013, the board of directors approved the issue of 130,000 thousand ordinary shares for cash capital increase at NT$26.1 per share. The aforementioned cash capital increase has been approved by the Financial Supervisory Commission of the ROC (the “FSC”) and effectively registered on August 15, 2013. The record date of the cash capital increase was October 2, 2013 and the Company has completed the registration formalities.

 

American Depositary Receipts

 

The Company issued ADSs and each ADS represents five ordinary shares. As of December 31, 2014 and 2015, 125,731 thousand and 115,240 thousand ADSs were outstanding and represented approximately 628,657 thousand and 576,198 thousand ordinary shares of the Company, respectively.

 

F- 58

b. Capital surplus

 

    December 31
    2014   2015
    NT$   NT$   US$ (Note 4)
             

May be used to offset a deficit,  

distributed as cash dividends, 

or transferred to share capital (1)

           
             
Arising from issuance of ordinary shares   $ 4,946,308     $ 5,479,616     $ 167,112  
Arising from the difference between consideration received and the carrying amount of the subsidiaries’ net assets during actual disposal or acquisition (Note 27)     -       7,197,510       219,503  
                         
May be used to offset a deficit only                        
                         
Arising from changes in percentage of ownership interest in subsidiaries (2)     9,055,250       8,491,435       258,964  
Arising from treasury share transactions     425,004       717,355       21,877  
Arising from exercised employee share options     375,448       544,112       16,594  
Arising from expired employee share options     3,626       3,626       111  
                         
May not be used for any purpose                        
                         
Arising from employee share options     1,178,210       1,080,590       32,955  
Arising from equity component of convertible bonds     -       214,022       6,527  
Arising from share of changes in capital surplus of associates     30,134       30,284       924  
                         
    $ 16,013,980     $ 23,758,550     $ 724,567  
                         

1) Such capital surplus may be used to offset a deficit; in addition, when the Company has no deficit, such capital surplus may be distributed as cash dividends or transferred to share capital (limited to a certain percentage of the Company’s capital surplus and once a year).

 

2) Such capital surplus arises from the effect of changes in ownership interest in a subsidiary resulted from equity transactions other than actual disposal or acquisition, or from changes in capital surplus of subsidiaries accounted for by using equity method.

 

c. Retained earnings and dividend policy

 

The Articles of Incorporation of ASE Inc. (the “Articles”) provides that annual net income shall be distributed in the following order:

 

1) Replenishment of deficits;

 

2) 10.0% as legal reserve;

 

3) Special reserve appropriated or reversed in accordance with laws or regulations set forth by the authorities concerned;

 

F- 59

4) An amount equal to the excess of the income from investments accounted for using the equity method over cash dividends as special reserve;

 

5) Addition or deduction of realized gains or losses on equity instruments at fair value through other comprehensive income;

 

6) Not more than 1.0% of the remainder, from 1) to 5), as remuneration to directors;

 

7) Between 7.0% to 11.0% of the remainder, from 1) to 5), as bonus to employees, of which 7.0% shall be distributed in accordance with the employee bonus plan and the excess shall be distributed to specified employees at the board of directors’ discretion; and

 

8) Any remainder from above as dividends to shareholders.

 

Employees to whom referred in 7) above include employees of subsidiaries that meet certain conditions, which are to be determined by the board of directors.

 

The Company is currently in the mature growth stage. To meet the capital needs for business development now and in the future and satisfy the shareholders’ demand for cash inflows, the Company shall use residual dividend policy to distribute dividends, of which the cash dividend is not lower than 30% of the total dividend distribution, with the remainder to be distributed in stock. A distribution plan is also to be made by the board of directors and passed for resolution in the shareholders’ meeting.

 

In accordance with the amendments to the Company Act of the ROC in May 2015, the recipients of dividends and bonuses are limited to shareholders and do not include employees. Accordingly, the Company expects to make amendments to the Company’s Articles of Incorporation to be approved during the 2016 annual shareholders’ meeting. For information about the accrual basis of the employee compensation and remuneration to directors and supervisors and the actual appropriations, please refer to employee benefits expense under profit before income tax in Note 22 (f).

 

Under Rule No. 1010012865 and Rule No. 1010047490 issued by the FSC and the directive titled “Questions and Answers for Special Reserves Appropriated Following Adoption of IFRSs”, the Company should appropriate or reverse to a special reserve. Any special reserve appropriated may be reversed to the extent that the net debit balance reverses and thereafter distributed.

 

Appropriation of earnings to legal reserve shall be made until the legal reserve equals the Company’s capital surplus. Legal reserve may be used to offset deficits. If the Company has no deficit and the legal reserve has exceeded 25% of the Company’s capital surplus, the excess may be transferred to capital or distributed in cash.

 

The appropriations of earnings for 2013 and 2014 resolved at the Company’s annual shareholders’ meetings in June 2014 and June 2015, respectively, were as follows:

 

    Appropriation of Earnings   Dividends Per Share
    For Year 2013   For Year 2014   For Year 2013   For Year 2014
    NT$   NT$   NT$   NT$
            (in dollars)   (in dollars)
                 
Legal reserve   $ 1,568,907     $ 2,359,267                  
Special reserve     (309,992 )     -                  
Cash dividends     10,156,005       15,589,825     $ 1.30     $ 2.00  
                                 
    $ 11,414,920     $ 17,949,092                  

F- 60

d. Special reserve appropriated in accordance with the local regulations

 

On January 1, 2013, the Company appropriated to the special reserve of NT$3,353,938 thousand relating to the exchange differences on translating foreign operations transferred to retained earnings in accordance with the local regulations.

 

e. Accumulated other comprehensive income

 

1) Exchange differences on translating foreign operations

 

    For the Years Ended December 31
    2013   2014   2015
    NT$   NT$   NT$   US$ (Note 4)
                 
Balance at January 1   $ (3,210,248 )   $ (525,521 )   $ 4,540,862     $ 138,483  
Exchange differences arising on translating foreign operations     2,685,647       5,064,616       11,459       349  
Share of exchange difference of associates accounted for using the equity method     (920 )     1,767       (59,650 )     (1,819 )
                                 
Balance at December 31   $ (525,521 )   $ 4,540,862     $ 4,492,671     $ 137,013  

     
2) Unrealized gain on available-for-sale financial assets

 

    For the Years Ended December 31
    2013   2014   2015
    NT$   NT$   NT$   US$ (Note 4)
                 
Balance at January 1   $ 355,254     $ 426,246     $ 526,778     $ 16,065  
Unrealized gain (loss) arising on revaluation of available-for-sale financial assets     14,985       (142,418 )     (4,304 )     (131 )
Cumulative loss (gain) reclassified to profit or loss on disposal of available-for-sale financial assets     (96 )     9,561       10,827       330  
Share of unrealized gain on available-for-sale financial assets of associates accounted for using the equity method     56,103       233,389       54,818       1,672  
                                 
Balance at December 31   $ 426,246     $ 526,778     $ 588,119     $ 17,936  

 

F- 61

3) Cash flow hedges - for the years ended December 31, 2013 and 2014 only

 

    For the Years Ended December 31
      2013   2014
      NT$   NT$
     
Balance at January 1   $ (3,755 )   $ (3,279 )
Gain (loss) arising on changes in the fair value of hedging instruments - Interest rate swap contracts     (2,597 )     795  
Cumulative loss arising on changes in fair value of hedging instruments reclassified to profit or loss – Interest rate swap contracts     3,842       2,484  
Income tax related to cash flow hedges     (769 )     -  
                 
Balance at December 31   $ (3,279 )   $ -  

 

As of December 31, 2013, the outstanding interest rate swap contracts of the Group were as follows:

 

Maturity Period  

Notional Amount  

(In Thousands)

 

Interest Rates

Paid (%)  

 

Interest Rates Received

(%)

 

Expected

Period for

Future Cash

Flow  

 

Expected Period for the Recognition of Gains or Losses from

Hedging  

                     
December 31, 2013                    
                     
2014.04   CNY 240,000   2.00   1.05-2.80   2014   2014

     
f. Treasury shares (in thousand shares)

 

    Balance at           Balance at
    January 1   Addition   Decrease   December 31
                 
2013                
                 
Shares held by subsidiaries   145,883   -   -   145,883
                 
2014                
                 
Shares held by subsidiaries   145,883   -   -   145,883
                 
2015                
                 
Shares held by subsidiaries   145,883   -   -   145,883
Shares reserved for bonds conversion   -   120,000   -   120,000
                 
    145,883   120,000   -   265,883
                 

In February 2015, the board of directors approved to repurchase up to 120,000 thousand of the Company’s ordinary shares which will be used for equity conversion of convertible overseas bonds to be issued in the future. The Company has completed the repurchase during March 2015 and the shares repurchased accounted for 1.53% of the Company’s total issued shares. The average repurchase price was NT$44.45 (US$1.36) per share.

 

F- 62

The Company’s shares held by its subsidiaries at each balance sheet date were as follows:

 

   

Shares

Held By
Subsidiaries
 

  Carrying amount   Carrying amount   Fair Value   Fair Value
    (in thousand
shares)
  NT$  

US$

(Note 4) 

  NT$  

US$

(Note 4)

                     
December 31, 2014                    
                     
ASE Test     88,200     $ 1,380,721             $ 3,360,438          
J&R Holding     46,704       381,709               1,779,413          
ASE Test, Inc.     10,979       196,677               418,291          
                                         
      145,883     $ 1,959,107             $ 5,558,142          
December 31, 2015                                        
                                         
ASE Test     88,200     $ 1,380,721     $ 42,108     $ 3,351,618     $ 102,215  
J&R Holding     46,704       381,709       11,641       1,774,743       54,124  
ASE Test, Inc.     10,979       196,677       5,998       417,193       12,723  
                                         
      145,883     $ 1,959,107     $ 59,747     $ 5,543,554     $ 169,062  

 

Fair values of the Company’s shares held by subsidiaries are based on the closing price from an available published price quotation, which is a Level 1 input in terms of IFRS 13, at the balance sheet dates.

 

The Company issued ordinary shares in connection with its merger with its subsidiaries. The shares held by its subsidiaries were reclassified from investments accounted for using the equity method to treasury shares on the proportion owned by the Company.

 

Under the Securities and Exchange Act in the ROC, the Company shall neither pledge treasury shares nor exercise shareholders’ rights on these shares, such as rights to dividends and voting. The subsidiaries holding treasury shares, however, retain shareholders’ rights except the rights to participate in any share issuance for cash and voting.

 

g. Non-controlling interests

 

    For the Years Ended December 31
    2013   2014   2015
    NT$   NT$   NT$   US$ (Note 4)
                 
Balance at January 1   $ 3,505,743     $ 4,128,361     $ 8,209,860     $ 250,377  
Attributable to non-controlling interests:                                
Share of profit for the year     465,656       640,499       968,567       29,538  
Exchange difference on translating foreign operations     131,621       340,392       (74,968 )     (2,286 )
Unrealized gain (loss) on available-for-sale financial assets     (50 )     (857 )     3,928       120  
Defined benefit plan actuarial losses     (3,385 )     (857 )     (3,440 )     (105 )
                                 

(Continued)

 

F- 63

    For the Years Ended December 31
    2013   2014   2015
    NT$   NT$   NT$   US$ (Note 4)
                 
Cash capital increase of subsidiary (Note 27)   $ 27,826     $ 3,067,712     $ -     $ -  
Additional non-controlling interests arising from partial disposal of subsidiaries (Note 27)     -       -       1,712,836       52,236  
Spin-off of subsidiaries     -       -       3,006       92  
Non-controlling interest relating to outstanding vested share options held by the employees of subsidiaries     100,547       120,376       904,904       27,597  
Cash dividends to non-controlling interests     (99,597 )     (85,766 )     (232,148 )     (7,079 )
                                 
Balance at December 31   $ 4,128,361     $ 8,209,860     $ 11,492,545     $ 350,490  
                                 

(Concluded)

 

22. PROFIT BEFORE INCOME TAX

 

a. Other operating income and expenses, net

 

    For the Years Ended December 31
    2013   2014   2015
    NT$   NT$   NT$   US$ (Note 4)
                 
Rental income   $ 63,130     $ 59,624     $ 60,230     $ 1,837  
Gain (loss) on disposal of property, plant and equipment and other assets     127,375       (45,509 )     (127,111 )     (3,877 )
Impairment loss on property, plant and equipment     (495,547 )     (297,754 )     (258,129 )     (7,872 )
Loss on damages and claims     (1,058,810 )     (102,101 )     (116,445 )     (3,551 )
Others     15,606       614,355       189,926       5,792  
                                 
    $ (1,348,246 )   $ 228,615     $ (251,529 )   $ (7,671 )

 

     
b. Other income

 

    For the Years Ended December 31
    2013   2014   2015
    NT$   NT$   NT$   US$ (Note 4)
                 
Dividends income   $ 131,449     $ 101,252     $ 396,973     $ 12,107  
Interest income     212,801       243,474       242,084       7,383  
Government subsidy     149,634       184,525       176,721       5,389  
                                 
    $ 493,884     $ 529,251     $ 815,778     $ 24,879  
                                 

F- 64

c. Other gains and losses

 

    For the Years Ended December 31
    2013   2014   2015
    NT$   NT$   NT$   US$ (Note 4)
                 
Net gain arising on financial instruments held for trading   $ 615,207     $ 1,266,653     $ 1,657,093     $ 50,536  
Net gain on financial assets designated as at FVTPL     180,152       572,187       815,742       24,878  
Foreign exchange gain or loss, net     (276,201 )     (1,221,979 )     (713,213 )     (21,751 )
Impairment loss on financial assets     (196,325 )     (10,390 )     -       -  
Bargain purchase gain     28,860       -       -       -  
Others     96,193       828       (10,827 )     (330 )
                                 
    $ 447,886     $ 607,299     $ 1,748,795     $ 53,333  

 

In 2013 and 2014, the Group assessed the financial condition as well as future operating performance of its debt investments with no active market - current and available-for-sale investments, and then charged an impairment loss of NT$196,325 thousand and NT$10,390 thousand, respectively.

 

d. Finance costs

 

    For the Years Ended December 31
    2013   2014   2015
    NT$   NT$   NT$   US$ (Note 4)
                 
Total interest expense for financial liabilities measured at amortized cost   $ 2,433,868     $ 2,548,850     $ 2,514,208     $ 76,676  
Less:  Amounts included in the cost of qualifying assets                                
Inventories related to real estate business     (42,999 )     (100,705 )     (197,287 )     (6,016 )
Property, plant and equipment     (137,567 )     (126,203 )     (48,135 )     (1,468 )
      2,253,302       2,321,942       2,268,786       69,192  
Loss arising on derivatives as designated hedging instruments in cash flow hedge accounting relationship reclassified from equity to profit or loss     3,842       2,484       -       -  
Other finance costs     50,311       29,671       43,357       1,322  
                                 
    $ 2,307,455     $ 2,354,097     $ 2,312,143     $ 70,514  

F- 65

Information relating to the capitalized borrowing costs was as follows:

 

      For the Years Ended December 31
      2013       2014       2015  
                         
Annual interest capitalization rates                        
Inventories related to real estate business     5.90%-7.21%       6.00%-7.21%       4.35%-6.77%  
Property, plant and equipment     1.54%-6.15%       0.88%-6.15%       0.75%-6.15%  

     
e. Depreciation and amortization

 

    For the Years Ended December 31
    2013   2014   2015
    NT$   NT$   NT$   US$ (Note 4)
                 
Property, plant and equipment   $ 24,696,607     $ 25,805,042     $ 28,938,770     $ 882,549  
Intangible assets     774,304       545,734       579,894       17,685  
                                 
  Total   $ 25,470,911     $ 26,350,776     $ 29,518,664     $ 900,234  
                                 
Summary of depreciation by function                                
Operating costs   $ 23,025,115     $ 24,050,546     $ 27,023,957     $ 824,153  
Operating expenses     1,671,492       1,754,496       1,914,813       58,396  
                                 
    $ 24,696,607     $ 25,805,042     $ 28,938,770     $ 882,549  
                                 
Summary of amortization by function                                
Operating costs   $ 397,976     $ 180,719     $ 124,235     $ 3,789  
Operating expenses     376,328       365,015       455,659       13,896  
                                 
    $ 774,304     $ 545,734     $ 579,894     $ 17,685  

     
f. Employee benefits expense

 

    For the Years Ended December 31
    2013   2014   2015
    NT$   NT$   NT$   US$ (Note 4)
                 
Post-employment benefits (Note 20)                
Defined contribution plans   $ 1,324,178     $ 1,589,505     $ 1,693,060     $ 51,634  
Defined benefit plans     430,378       445,795       413,490       12,610  
      1,754,556       2,035,300       2,106,550       64,244  
Equity-settled share-based payments     260,801       110,157       133,496       4,071  
Salary, incentives and bonus     34,032,023       40,475,594       41,985,329       1,280,431  
Other employee benefits     5,211,948       5,984,074       6,529,812       199,140  
                                 
    $ 41,259,328     $ 48,605,125     $ 50,755,187     $ 1,547,886  
                                 
                              (Continued)  

F- 66

    For the Years Ended December 31
    2013   2014   2015
    NT$   NT$   NT$   US$ (Note 4)
                 
Summary of employee benefits expense by function                
Operating costs   $ 28,053,492     $ 33,243,224     $ 34,720,359     $ 1,058,870  
Operating expenses     13,205,836       15,361,901       16,034,828       489,016  
                                 
    $ 41,259,328     $ 48,605,125     $ 50,755,187     $ 1,547,886  

(Concluded)

 

The existing Articles of Incorporation of the Company stipulate to distribute bonus to employees and remuneration to directors and supervisors at the rates in 7%-11% and no higher than 1% from net income (net of the bonus and remuneration), respectively, (retained earnings and dividend policy in Note 21c). For the year ended December 31, 2014, the bonus to employees and the remuneration to directors and supervisors were NT$2,335,786 thousand and NT$212,344 thousand, respectively, representing 11% and 1%, respectively, of the net income (net of the bonus and remuneration).

 

To be in compliance with the Company Act of the ROC as amended in May 2015, the amended Articles of Incorporation of the Company, as proposed by the board of directors in January 2016, stipulate to distribute employees’ compensation and remuneration to directors at the rates in 5.25%-8.25% and no higher than 0.75%, respectively, of net profit before income tax, employees’ compensation and remuneration to directors. For the year ended December 31, 2015, the employees’ compensation and the remuneration to directors were NT$2,033,500 thousand (US$62,016 thousand) and NT$184,500 thousand (US$5,627 thousand), respectively, which were accrued based on 8.25% and 0.75% of net profit before income tax, employees’ compensation and remuneration to directors, respectively. The employees’ compensation and remuneration to directors for the year ended December 31, 2015 were 2,033,800 thousand (US$62,065 thousand) and 140,000 thousand (US$4,270 thousand), respectively, all distributed in cash, and have been approved by the Company’s board of directors on April 1, 2016 and are subject to the resolution of the amendments to the Company’s Articles of Incorporation for adoption by the shareholders in their meeting to be held on June 28, 2016, and in addition thereto a report of such distribution shall be submitted to the shareholders' meeting.

 

Material differences between such estimated amounts and the amounts proposed by the board of directors on or before the annual consolidated financial statements authorized for issue are adjusted in the year the compensation and remuneration were recognized. If there is a change in the proposed amounts after the consolidated financial statements authorized for issue, the differences are recorded as a change in accounting estimate.

 

The bonus to employees and the remuneration to directors and supervisors for 2013 and 2014 distributed in cash resolved at the Company’s annual shareholders’ meetings in June 2014 and June 2015, respectively, were as follows:

 

    For Year 2013   For Year 2014
    NT$   NT$
         
Bonus to employees   $ 1,587,300     $ 2,335,600  
Remuneration to directors and supervisors     144,000       211,200  
                 

The differences between the resolved amounts of the bonus to employees and remuneration to directors and supervisors and the accrued amounts reflected in the consolidated financial statements for the years ended December 31, 2013 and 2014 was deemed changes in estimates. The difference was NT$385 thousand and NT$1,330 thousand (US$41 thousand) and had been adjusted in earnings for the years ended December 31, 2014 and 2015, respectively.

 

F- 67

23. INCOME TAX

 

a. Income tax recognized in profit or loss

 

The major components of income tax expense were as follows:

 

    For the Years Ended December 31
    2013   2014   2015
    NT$   NT$   NT$   US$ (Note 4)
                 
Current income tax                
In respect of the current year   $ 2,594,114     $ 3,524,456     $ 4,029,076     $ 122,875  
Income tax on unappropriated earnings     209,616       1,281,877       187,654       5,723  
Adjustments for prior years     (91,633 )     72,380       (20,719 )     (632 )
      2,712,097       4,878,713       4,196,011       127,966  
                                 
Deferred income tax                                
In respect of the current year     821,592       714,850       194,623       5,935  
Effect of foreign currency exchange differences     (62,285 )     75,305       (58,671 )     (1,789 )
Others     28,191       (2,914 )     (20,890 )     (637 )
      787,498       787,241       115,062       3,509  
                                 
Income tax expense recognized in profit or loss   $ 3,499,595     $ 5,665,954     $ 4,311,073     $ 131,475  
                               

A reconciliation of income tax expense calculated at the statutory rate and income tax expense recognized in profit or loss was as follows:

 

    For the Years Ended December 31
    2013   2014   2015
    NT$   NT$   NT$   US$ (Note 4)
                 
Profit before income tax   $ 19,369,756     $ 28,535,055     $ 25,293,145     $ 771,367  
                                 
Income tax expense calculated at the statutory rate   $ 3,684,109     $ 5,101,984     $ 6,307,148     $ 192,350  
Nontaxable expense (income) in determining taxable income     (172,322 )     128,644       160,530       4,896  
Tax-exempt income     (373,113 )     (623,652 )     (537,987 )     (16,407 )
Additional income tax on unappropriated earnings     558,042       1,887,845       338,142       10,312  
Loss carry-forward and income tax credits currently used     (684,309 )     (1,329,753 )     (1,286,705 )     (39,241 )
Remeasurement of deferred income tax assets, net     341,863       435,143       (649,336 )     (19,803 )
Adjustments for prior years’ tax     (91,633 )     72,380       (20,719 )     (632 )
Land value increment tax     236,958       (6,637 )     -       -  
                              (Continued)  

F- 68

    For the Years Ended December 31
    2013   2014   2015
    NT$   NT$   NT$   US$ (Note 4)
                                 
Income tax expense recognized in profit or loss   $ 3,499,595     $ 5,665,954     $ 4,311,073     $ 131,475  

(Concluded)

 

For the years ended December 31, 2013, 2014 and 2015, the Group applied a tax rate of 17% for resident entities subject to the Income Tax Law of the ROC; for the subsidiaries located in China, the applied tax rate was 25%; and for other jurisdictions, the Group measures taxes by using the applicable tax rate for each individual jurisdiction.

 

b. Income tax recognized directly in equity

 

    For the Years Ended December 31
    2013   2014   2015
      NT$       NT$       NT$       US$ (Note 4)  
                                 
Deferred income tax                                
Employee share options   $ —       $ 4,481     $ (33 )   $ (1 )

 

     
c. Income tax recognized in other comprehensive income

 

    For the Years Ended December 31
    2013   2014   2015
    NT$   NT$   NT$   US$ (Note 4)
                 
Deferred income tax                
Actuarial gain or loss on defined benefit plan   $ (66,706 )   $ 23,885     $ 11,002     $ 336  
Fair value changes of hedging instruments for cash flow hedges     (769 )     -       -       -  
                                 
    $ (67,475 )   $ 23,885     $ 11,002     $ 336  

     
d. Current tax assets and liabilities

 

    December 31
    2014   2015
    NT$   NT$   US$ (Note 4)
             
Current tax assets            
Tax refund receivable   $ 23,616     $ 10,984     $ 335  
Prepaid income tax     41,696       157,733       4,810  
                         
    $ 65,312     $ 168,717     $ 5,145  
                         
Current tax liabilities                        
Income tax payable   $ 6,630,696     $ 6,746,022     $ 205,734  

     
e. Deferred tax assets and liabilities

 

The Group offset certain deferred tax assets and deferred tax liabilities which met the offset criteria.

 

F- 69

The movements of deferred tax assets and deferred tax liabilities were as follows:

 

    Balance at January 1   Recognized in Profit or Loss   Recognized in Other Comprehensive Income   Recognized in Equity   Exchange Differences   Balance at December 31
    NT$   NT$   NT$   NT$   NT$   NT$
                         
Year ended December 31, 2013                        
                         
Temporary differences                        
Property, plant and equipment   $ (977,288 )   $ (730,743 )   $ -     $ -     $ 23,415     $ (1,684,616 )
Defined benefit obligation     997,518       (16,526 )     (66,706 )     -       (59,746 )     854,540  
Cash flow hedges     769       -       (769 )     -       -       -  
FVTPL financial instruments     61,499       (73,832 )     -       -       4       (12,329 )
Others     445,904       336,473       -       -       (14,633 )     767,744  
      528,402       (484,628 )     (67,475 )     -       (50,960 )     (74,661 )
Loss carry-forward     380,694       (117,007 )     -       -       6,344       270,031  
Investment credits     1,029,097       (185,863 )     -       -       (17,669 )     825,565  
                                                 
    $ 1,938,193     $ (787,498 )   $ (67,475 )   $ -     $ (62,285 )   $ 1,020,935  
                                                 
Year ended December 31, 2014                                                
                                                 
Temporary differences                                                
Property, plant and equipment   $ (1,684,616 )   $ (804,082 )   $ -     $ -     $ 56,843     $ (2,431,855 )
Defined benefit obligation     854,540       (59,807 )     23,885       -       (21,976 )     796,642  
FVTPL financial instruments     (12,329 )     (170,722 )     -       -       12,992       (170,059 )
Others     767,744       372,563       -       4,481       21,509       1,166,297  
      (74,661 )     (662,048 )     23,885       4,481       69,368       (638,975 )
Loss carry-forward     270,031       246,334       -       -       3,533       519,898  
Investment credits     825,565       (370,674 )     -       -       (2,560 )     452,331  
Others     -       (853 )     -       -       -       (853 )
                                                 
    $ 1,020,935     $ (787,241 )   $ 23,885     $ 4,481     $ 70,341     $ 332,401  
                                                 
Year ended December 31, 2015                                                
                                                 
Temporary differences                                                
Property, plant and equipment   $ (2,431,855 )   $ (1,083,273 )   $ -     $ -     $ 10,670     $ (3,504,458 )
Defined benefit obligation     796,642       20,398       11,002       -       17,897       845,939  
FVTPL financial instruments     (170,059 )     (62,152 )     -       -       13       (232,198 )
Others     1,166,297       229,799       -       (33 )     (11,076 )     1,384,987  
      (638,975 )     (895,228 )     11,002       (33 )     17,504       (1,505,730 )
Loss carry-forward     519,898       812,217       -       -       (8,538 )     1,323,577  
Investment credits     452,331       (32,904 )     -       -       (68,308 )     351,119  
Others     (853 )     853       -       -       -       -  
                                                 
    $ 332,401     $ (115,062 )   $ 11,002     $ (33 )   $ (59,342 )   $ 168,966  

 

                         
    Balance at January 1   Recognized in Profit or Loss   Recognized in Other Comprehensive Income   Recognized in Equity   Exchange Differences   Balance at December 31
    US$
(Note 4)
  US$
(Note 4)
  US$
(Note 4)
  US$
(Note 4)
  US$
(Note 4)
  US$
(Note 4)
                         
Year ended December 31, 2015                        
                         
Temporary differences                        
Property, plant and equipment   $ (74,165 )   $ (33,037 )   $ -     $ -     $ 325     $ (106,877 )
Defined benefit obligation     24,295       622       336       -       546       25,799  
FVTPL financial instruments     (5,186 )     (1,895 )     -       -       -       (7,081 )
Others     35,569       7,008       -       (1 )     (338 )     42,238  
      (19,487 )     (27,302 )     336       (1 )     533       (45,921 )
Loss carry-forward     15,855       24,770       -       -       (260 )     40,365  
Investment credits     13,795       (1,003 )     -       -       (2,083 )     10,709  
Other     (26 )     26       -       -       -       -  
                                                 
    $ 10,137     $ (3,509 )   $ 336     $ (1 )   $ (1,810 )   $ 5,153  

 

f. Items for which no deferred tax assets have been recognized

 

Unrecognized deferred tax assets related to loss carry-forward, investment credits and deductible temporary differences were summarized as follows:

 

F- 70

    December 31
    2014   2015
    NT$   NT$   US$ (Note 4)
             
Loss carry-forward   $ 694,960     $ 666,373     $ 20,322  
Investment credits     629,231       387,480       11,817  
Deductible temporary differences     957,183       1,007,105       30,714  
                         
    $ 2,281,374     $ 2,060,958     $ 62,853  

 

The unrecognized loss carry-forward will expire through 2030 and the unrecognized investment credits will expire through 2018.

 

g. Information about unused loss carry-forward, unused investment credits, tax-exemption and other tax relief

 

As of December 31, 2015, the unused loss carry-forward comprised of:

 

Year of Expiry   NT$   US$
        (Note 4)
         
2016   $ 124,478     $ 3,796  
2017     318,985       9,728  
2018     268,332       8,183  
2019     333,284       10,164  
2020 and thereafter     944,871       28,816  
                 
    $ 1,989,950     $ 60,687  
                 

As of December 31, 2015, unused investment credits comprised of:

 

        Remaining Creditable Amount    
Laws and Statutes   Tax Credit Source   NT$   US$   Expiry Year
            (Note 4)    
                 
Statute for Upgrading Industries   Purchase of machinery and equipment   $ 710,863   $ 21,679   2018
    Others   27,736   847   2017
                 
        $ 738,599   $ 22,526    

 

As of December 31, 2015, profits attributable to the following expansion projects were exempted from income tax for a 3-year or 5-year period:

 

    Tax-exemption Period
     
Construction and expansion of 2004 by the Company   2012.01-2016.12
Construction and expansion of 2005 by the Company   2012.01-2016.12
Construction and expansion of 2007 by the Company   2013.01-2015.12
Construction and expansion of 2007 by the Company   2016.01-2020.12
Construction and expansion of 2008 by the Company   2014.01-2018.12
Construction and expansion of 2005 by ASE Test Inc.   2011.01-2015.12

(Continued)

 

F- 71

    Tax-exemption Period
     
Construction and expansion of 2008 by ASE Test Inc.   2014.01-2018.12
Construction and expansion of 2009 by ASE Test Inc.   2018.01-2022.12
Construction of 2005 by ASE Electronics Inc.   2012.01-2016.12
Expansion of 2008 by ASE Electronics Inc.   2016.01-2020.12

(Concluded)

 

Some China subsidiaries qualify as high technology enterprises which entitle them to a reduced income tax rate of 15% and also make them eligible to deduct certain times of research and development expenses from their taxable income.

 

h. Unrecognized deferred tax liabilities associated with investments

 

As of December 31, 2014 and 2015, the taxable temporary differences associated with investments in subsidiaries for which no deferred tax liabilities have been recognized were NT$11,400,826 thousand and NT$12,676,347 thousand (US$386,592 thousand), respectively.

 

i. Integrated income tax

 

As of December 31, 2014 and 2015, unappropriated earnings were all generated on and after January 1, 1998. As of December 31, 2014 and 2015, the balance of the Imputation Credit Account (“ICA”) was NT$934,038 thousand and NT$1,913,243 thousand (US$58,348 thousand), respectively.

 

The creditable ratio for the distribution of earnings of 2014 and 2015 was 6.88% (actual) and 8.66% (estimated), respectively.

 

j. Income tax assessments

 

Income tax returns of ASE Inc. and its ROC subsidiaries have been examined by authorities through 2012 and through 2010, 2011, 2012 or 2013, respectively. ASE Inc. and some of its ROC subsidiaries disagreed with the result of examinations relating to its income tax returns for 2004 through 2008 and 2010 through 2012 and appealed to the tax authorities. A settlement with the tax authorities was reached in June 2015. The related income tax expenses in the years resulting from the examinations have been accrued in respective tax years or in the year of the settlement.

 

24. EARNINGS PER SHARE

 

The earnings and weighted average number of ordinary shares outstanding in the computation of earnings per share were as follows:

 

Net profit for the year

 

    For the Years Ended December 31
    2013   2014   2015
    NT$   NT$   NT$   US$ (Note 4)
                 
Profit for the year attributable to owners of the Company   $ 15,404,505     $ 22,228,602     $ 20,013,505     $ 610,354  
Effect of potentially dilutive ordinary shares:                                
Employee share options issued by subsidiaries     (131,756 )     (260,925 )     (210,126 )     (6,408 )

(Continued)

 

F- 72

    For the Years Ended December 31
    2013   2014   2015
    NT$   NT$   NT$   US$ (Note 4)
                 
Convertible bonds   $ 156,193     $ 931,344     $ 901,187     $ 27,483  
                                 
Earnings used in the computation of diluted earnings per share   $ 15,428,942     $ 22,899,021     $ 20,704,566     $ 631,429  

(Concluded)

 

Weighted average number of ordinary shares outstanding (in thousand shares):

 

    For the Years Ended December 31
    2013   2014   2015
             
Weighted average number of ordinary shares in computation of basic earnings per share     7,508,539       7,687,930       7,652,773  
Effect of potentially dilutive ordinary shares:                        
Convertible bonds     117,085       375,271       455,671  
Employee share options     67,081       101,850       86,994  
Bonus to employees or employees’ compensation     54,926       55,643       54,626  
                         
Weighted average number of ordinary shares in computation of diluted earnings per share     7,747,631       8,220,694       8,250,064  
                         

For purposes of the ADS calculation, the denominator represents the above-mentioned weighted average outstanding shares divided by five (one ADS represents five ordinary shares). The numerator was the same.

 

The Group is able to settle the compensation or bonuses paid to employees in cash or shares. The Group assumed that the entire amount of the compensation or bonus would be settled in shares and the resulting potential shares were included in the weighted average number of ordinary shares outstanding used in the computation of diluted earnings per share if the effect is dilutive. Such dilutive effect of the potential shares was included in the computation of diluted earnings per share until the shareholders approve the number of shares to be distributed to employees at their meeting in the following year.

 

25. SHARE-BASED PAYMENT ARRANGEMENTS

 

Employee share option plans of the Company and its subsidiaries

 

In order to attract, retain and reward employees, ASE Inc. has five employee share option plans for full-time employees of the Group, including 100,000 thousand share options approved to be granted in April 2015. Each share option represents the right to purchase one ordinary share of ASE Inc. when exercised. Under the terms of the plans, share options are granted at an exercise price equal to or not less than the closing price of the ordinary shares listed on the TSE at the grant date. The option rights of these plans are valid for 10 years, non-transferable and exercisable at certain percentages subsequent to the second anniversary of the grant date. For any subsequent changes in the Company’s capital structure, the exercise price is accordingly adjusted.

 

F- 73

a. ASE Inc. Option Plans

 

Information about share options was as follows:

 

    For the Years Ended December 31
    2013   2014   2015
        Weighted       Weighted       Weighted
        Average       Average       Average
    Number of   Exercise   Number of   Exercise   Number of   Exercise
    Options   Price   Options   Price   Options   Price
    (In   Per Share   (In   Per Share   (In   Per Share
    Thousands)   (NT$)   Thousands)   (NT$)   Thousands)   (NT$)
                         
Balance at January 1     344,332     $ 20.3       285,480     $ 20.5       209,745     $ 20.7  
Options granted     -       -       -       -       94,270       36.5  
Options forfeited     (3,307 )     20.7       (1,515 )     20.5       (1,975 )     30.3  
Options expired     (10 )     7.4       (322 )     13.5       (730 )     11.1  
Options exercised     (55,535 )     19.3       (73,898 )     19.7       (48,703 )     20.6  
                                                 
Balance at December 31     285,480       20.5       209,745       20.7       252,607       26.6  
                                                 
Options exercisable, end of year     228,685       20.4       189,240       20.7       158,103       20.8  
                                                 
Weighted-average fair value of options granted (NT$)   $ -             $ -             $ 7.18~7.39          
                                                 

The weighted average share price at exercise dates of share options for the years ended December 31, 2013, 2014 and 2015 was NT$26.2, NT$35.1 and NT$38.8 (US$1.18), respectively.

 

Information about the Company’s outstanding share options at each balance sheet date was as follows:

 

    Range of Exercise Price  Per Share (NT$)  

Weighted Average Remaining

Contractual Life (Years)  

         
December 31, 2014   $ 11.1-13.5       0.4  
      20.4-22.6       4.4  
                 
December 31, 2015     20.4-22.6       3.5  
      36.5       9.7  

 

b. ASE Mauritius Inc. Option Plan

 

ASE Mauritius Inc. has an employee share option plan for full-time employees of the Group which granted 30,000 thousand units in December 2007. Under the terms of the plan, each unit represents the right to purchase one ordinary share of ASE Mauritius Inc. when exercised. The option rights of the plan are valid for 10 years, non-transferable and exercisable at certain percentages subsequent to the second anniversary of the grant date.

 

F- 74

Information about share options was as follows:

 

    For the Years Ended December 31
    2013   2014   2015
    Number of   Exercise   Number of   Exercise   Number of   Exercise
    Options   Price   Options   Price   Options   Price
    (In   Per Share   (In   Per Share   (In   Per Share
    Thousands)   (US$)   Thousands)   (US$)   Thousands)   (US$)
                         
Balance at January 1     28,595     $ 1.7       28,545     $ 1.7       28,545     $ 1.7  
Options forfeited     (50 )     1.7       -       -       (75 )     1.7  
                                                 
Balance at December 31     28,545       1.7       28,545       1.7       28,470       1.7  
                                                 
Options exercisable, end of year     28,545       1.7       28,545       1.7       28,470       1.7  
                                                 

As of December 31, 2014 and 2015, the share options were all vested and the remaining contractual life was 3 years and 2 years, respectively.

 

c. USIE Option Plans

 

The terms of the plans issued by USIE were the same with those of the Company’s option plans.

 

Information about share options was as follows:

 

    For the Years Ended December 31
    2013   2014   2015
        Weighted       Weighted       Weighted
        Average       Average       Average
    Number of   Exercise   Number of   Exercise   Number of   Exercise
    Options   Price   Options   Price   Options   Price
    (In   Per Share   (In   Per Share   (In   Per Share
    Thousands)   (US$)   Thousands)   (US$)   Thousands)   (US$)
                         
Balance at January 1     34,966     $ 2.1       34,939     $ 2.1       34,159     $ 2.1  
Options forfeited     (27 )     2.9       -       -       (84 )     2.8  
Options exercised     -       -       (780 )     1.5       (4,380 )     1.9  
                                                 
Balance at December 31     34,939       2.1       34,159       2.1       29,695       2.1  
                                                 
Options exercisable, end of year     28,281     2.0       30,874     2.0       28,106     2.1  
                                                 

Information about USIE’s outstanding share options at each balance sheet date was as follows:

 

   

Range of Exercise Price Per Share  

(US$)

 

Weighted Average Remaining

Contractual Life (Years)  

         
December 31, 2014   $ 1.5       5.0  
      2.4-2.9       5.8  
                 
December 31, 2015     1.5       5.0  
      2.4-2.9       4.9  

     
d. USISH Option Plans

 

In November 2015, the shareholders of USISH approved a share option plan for the employees of USISH. Each unit represents the right to purchase one ordinary share of USISH when exercised. The options are valid for 10 years, non-transferable and exercisable at certain percentages subsequent to the second anniversary of the grant date incorporated with certain performance conditions. For any subsequent changes in USISH’s capital structure, the exercise price is accordingly adjusted.

 

F- 75

Information about share options was as follows:

 

   

For the Year Ended

December 31, 2015  

   

Number of Options

(In Thousand)  

 

Exercise Price

Per Share  

(CNY)

         
Balance at January 1     -     $ -  
Options granted     26,640       15.5  
Options forfeited     (13 )     15.5  
                 
Balance at December 31     26,627       15.5  
                 
Options exercisable, end of year     -       -  
                 
Weighted-average fair value of options granted (CNY)   $ 5.95 7.14          

 

As of December 31, 2015, the remaining contractual life of the share options was 9.9 years.

 

Fair value of share options

 

Share options granted by the Company and USISH in 2015 were measured using the Hull & White Model (2004) incorporated with Ritchken’s Trinomial Tree Model (1995) and the Black-Scholes Option Pricing Model, respectively, and the inputs to the models were as follows:

 

      ASE Inc.   USISH
           
Share price at the grant date     NT$36.5   CNY15.2
Exercise prices     NT$36.5   CNY15.5
Expected volatility     27.02%   40.33%-45.00%
Expected lives     10 years   10 years
Expected dividend yield     4.00%   0.87%
Risk free interest rates     1.34%   3.06%-3.13%
           

Expected volatility was based on the historical share price volatility over the past 10 years of ASE Inc. and the comparable companies of USISH, respectively. Under the Hull & White Model (2004) incorporated with Ritchken’s Trinomial Tree Model (1995), the Company assumed that employees would exercise the options after vesting date when the share price was 1.88 times the exercise price to allow for the effects of early exercise.

 

In December 2013, 2014 and 2015, USIE had modified the terms of its option plan granted in 2007 to extend the valid period from 10 years to 11 years, from 11 years to 12 years and from 12 years to 13 years, respectively. The incremental fair value of NT$15,497 thousand, NT$10,378 thousand and NT$13,721 thousand (US$418 thousand) were all recognized as employee benefits expense in 2013, 2014 and 2015, respectively, since the options were all vested.

 

Employee benefits expense recognized on employee share options was NT$234,093 thousand, NT$110,157 thousand and NT$133,496 thousand (US$4,071 thousand) for the years ended December 31, 2013, 2014 and 2015, respectively.

 

F- 76

New shares issued under cash capital increase reserved for subscription by employees

 

In July 2013, the board of directors approved the cash capital increase and, as required under the Company Act of the ROC, simultaneously granted options to employees to purchase 15% of such newly issued shares with such options exercisable within 3 days and vested when granted. The grant of the options was treated as employee options, accordingly a share-based compensation, and measured at fair value in accordance with IFRS 2. The Group recognized employee benefits expense and capital surplus of NT$26,708 thousand in full at the grant date (also the vested date).

 

Information about the Company’s employee share options related to the aforementioned newly issued shares was as follows:

 

   

Number of Options

(In Thousand)

  Fair Value (NT$)
         
Balance at January 1, 2013     -     $ -  
Options granted     14,437       1.85  
Options exercised     (12,477 )     1.85  
Options forfeited     (1,960 )     -  
                 
Balance at December 31, 2013     -       -  

 

Fair value was measured using the Black-Scholes Option Pricing Model and the inputs to the model were as follows:

 

Share price at the grant date   NT$27.95 per share
Exercise price   NT$26.10 per share
Expected volatility   17.98%
Expected lives   3 days
Expected dividend yield   -
Risk free interest rate   0.57%

 

Expected volatility was based on the Company’s historical share prices volatility.

 

26. BUSINESS COMBINATIONS

 

a. Subsidiary acquired

 

    Principal Activity   Date of Acquisition   Proportion of Voting Equity Interests Acquired   Cash Consideration
                NT$
                 
Wuxi Tongzhi   Packaging and testing of semiconductors   May 27, 2013   100%   $ 338,021

 

b. Consideration transferred, fair value of assets acquired and liabilities assumed as well as net cash outflow on acquisition of Wuxi Tongzhi at the acquisition date were as follows:

 

        NT$
         
Current assets       $ 158,100
Non-current assets      
Property, plant and equipment         258,420
Other non-current assets           35,656

(Continued)

 

F- 77

    NT$
     
Current liabilities   $ (85,295 )
      366,881  
Bargain purchase gain - recognized in other gains and losses     (28,860 )
Total consideration     338,021  
Less:  Cash and cash equivalent acquired     (87,634 )
         
Net cash outflow on acquisition of Wuxi Tongzhi   $ 250,387  

(Concluded)

 

c. Impact of acquisition on the operating results of the Group

 

The operating results of Wuxi Tongzhi, since the acquisition date to December 31, 2013, included in the consolidated statements of comprehensive income were operating revenue NT$316,380 thousand and profit for the period NT$15,762 thousand.

 

d. Pro-forma information

 

Had the business combination been in effect at the beginning of the year, the Group’s operating revenues and profit for the year ended December 31 2013 would have been NT$220,093,736 thousand and NT$15,873,615 thousand, respectively.

 

This pro-forma information is for illustrative purposes only and is not necessarily an indication of operating revenues and results of operations of the Group that actually would have been achieved had the acquisition been completed at the beginning of the year, nor is it intended to be a projection of future results.

 

27. EQUITY TRANSACTION WITH NON-CONTROLLING INTERESTS

 

The Group’s subsidiary, Luchu, issued new ordinary shares for cash capital increase of NT$400,000 thousand in August 2013. The Group subscribed for additional new shares at a percentage different from its existing ownership percentage and accordingly the Group’s shareholdings of Luchu increased from 84.3% to 86.1%.

 

In November 2014, USISH completed its cash capital increase of CNY2,017,690 thousand and the Group’s shareholdings of USISH decreased from 88.6% to 82.1% since the Group did not subscribe for additional new shares.

 

In April 2015, USIE sold its shareholdings of 54,000 thousand ordinary shares of USISH amounting to CNY1,992,060 thousand (US$307,521 thousand) and, as a result, the Group’s shareholdings of USISH decreased from 82.1% to 77.2%.

 

The aforementioned transactions were all accounted for as equity transactions since the Group did not cease to have control over those subsidiaries and, as a result, capital surplus was charged a deduction of NT$330 thousand, an addition of NT$6,871,062 thousand and an addition of NT$7,197,510 thousand (US$219,503 thousand) in 2013, 2014 and 2015, respectively.

 

Furthermore, the shareholders of USIE approved in December 2015 to repurchase 4,500,820 shares of USIE’s outstanding ordinary shares at US$18.82 per share. The board of directors of USIE resolved in February 2016 to cancel the repurchased ordinary shares on February 17, 2016, the record date for the capital reduction.

 

F- 78

28. NON-CASH TRANSACTIONS

 

For the years ended December 31, 2013, 2014 and 2015, the Group entered into the following non-cash investing activities which were not reflected in the consolidated statements of cash flows:

 

    For the Years Ended December 31
    2013   2014   2015
    NT$   NT$   NT$   US$ (Note 4)
                 
Payments for property, plant and equipment                
Purchase of property, plant and equipment   $ 27,044,072     $ 43,448,587     $ 28,280,821     $ 862,483  
Increase (decrease) in prepayments for property, plant and equipment (recorded under the line item of other non-current assets)     327,810       (34,894 )     (267,334 )     (8,153 )
Decrease (increase) in payables for property, plant and equipment     1,908,404       (3,688,526 )     2,314,772       70,594  
Capitalized borrowing costs     (137,567 )     (126,203 )     (48,135 )     (1,468 )
                                 
    $ 29,142,719     $ 39,598,964     $ 30,280,124     $ 923,456  
                                 
Proceeds from disposal of property, plant and equipment                                
Consideration from disposal of property, plant and equipment   $ 350,873     $ 462,438     $ 201,766     $ 6,153  
Decrease (increase) in other receivables     673       (41,231 )     41,265       1,259  
                                 
    $ 351,546     $ 421,207     $ 243,031     $ 7,412  

29. OPERATING LEASE ARRANGEMENTS

 

Except those discussed in Note 16, the Company and its subsidiary, ASE Test, Inc., lease the land on which their buildings are located under various operating lease agreements with the ROC government expiring through June 2035. The agreements grant these entities the option to renew the leases and reserve the right for the lessor to adjust the lease payments upon an increase in the assessed value of the land and to terminate the leases under certain conditions. In addition, the Group leases buildings, machinery and equipment under operating leases.

 

The subsidiaries’ offices located in U.S.A. and Japan, etc. are leased from other parties and the lease term will expire through 2016 to 2023 with the option to renew the leases upon expiration.

 

The Group recognized rental expense of NT$1,301,550 thousand, NT$1,459,835 thousand and NT$ 1,390,821 thousand (US$42,416 thousand) for the years ended December 31, 2013, 2014 and 2015, respectively.

 

F- 79

30. CAPITAL MANAGEMENT

 

The capital structure of the Group consists of debt and equity. The Group manages its capital to ensure that entities in the Group will be able to continue as going concerns while maximizing the return to shareholders through the optimization of the debt and equity balance. Key management personnel of the Group periodically reviews the cost of capital and the risks associated with each class of capital. In order to balance the overall capital structure, the Group may adjust the amount of dividends paid to shareholders, the number of new shares issued or repurchased, and the amount of new debt issued or existing debt redeemed.

 

The Group is not subject to any externally imposed capital requirements except those discussed in Note 17.

 

31. FINANCIAL INSTRUMENTS

 

a. Fair value of financial instruments that are not measured at fair value

 

1) Fair value of financial instruments not measured at fair value but for which fair value is disclosed

 

Except bonds payable measured at amortized cost, the management considers that the carrying amounts of financial assets and financial liabilities not measured at fair value approximate their fair values.

 

The carrying amounts and fair value of bonds payable as of December 31, 2014 and 2015, respectively, were as follows:

 

    Carrying Amount   Fair Value
    NT$   US$ (Note 4)   NT$   US$ (Note 4)
                 
December 31, 2014   $ 31,270,131             $ 31,702,988          
December 31, 2015     38,426,250     $ 1,171,889       38,465,355     $ 1,173,082  

 

     
2) Fair value hierarchy

 

The aforementioned fair value hierarchy of bonds payable was Level 3 which was determined based on discounted cash flow analysis with the applicable yield curve for the duration or the last trading prices.

 

b. Fair value of financial instruments that are measured at fair value on a recurring basis

 

1) Fair value hierarchy

 

    Level 1   Level 2   Level 3   Total
    NT$   NT$   NT$   NT$
                 
December 31, 2014                
                 
Financial assets at FVTPL                
Financial assets designated as at FVTPL                
Structured time deposits   $ -     $ 2,376,050     $ -     $ 2,376,050  
Private-placement convertible bonds     -       100,500       -       100,500  
                                 
Derivative financial assets                                
Swap contracts     -       1,907,705       -       1,907,705  
Forward exchange contracts     -       27,811       -       27,811  
                                 
Non-derivative financial assets held for trading                                
Open-end mutual funds     533,425       -       -       533,425  

                               (Continued)  

F- 80

    Level 1   Level 2   Level 3   Total
    NT$   NT$   NT$   NT$
                 
Quoted shares   $ 43,352     $ -     $ -     $ 43,352  
                                 
    $ 576,777     $ 4,412,066     $ -     $ 4,988,843  
                                 
Available-for-sale financial assets                                
Open-end mutual funds   $ 1,500,434     $ -     $ -     $ 1,500,434  
Limited Partnership     -       -       555,361       555,361  
Unquoted shares     -       -       223,505       223,505  
Quoted shares     195,070       -       -       195,070  
                                 
    $ 1,695,504     $ -     $ 778,866     $ 2,474,370  
                                 
Financial liabilities at FVTPL                                
Derivative financial liabilities                                
Conversion option, redemption option and put option of convertible bonds   $ -     $ 2,520,606     $ -     $ 2,520,606  
Swap contracts     -       99,165       -       99,165  
Forward exchange contracts     -       31,581       -       31,581  
                                 
    $ -     $ 2,651,352     $ -     $ 2,651,352  

(Concluded)

 

    Level 1   Level 2   Level 3   Total
    NT$  

US$

(Note 4)

  NT$  

US$

(Note 4)

  NT$  

US$

(Note 4)

  NT$  

US$

(Note 4)

                               
December 31, 2015                                
                                 
Financial assets at FVTPL                                
Financial assets designated as at FVTPL                                
Structured time deposits   $ -     $ -     $ 1,646,357     $ 50,209     $ -     $ -     $ 1,646,357     $ 50,209  
Private-placement convertible bonds     -       -       100,500       3,065       -       -       100,500       3,065  
                                                                 
Derivative financial assets                                                                
Swap contracts     -       -       1,452,611       44,301       -       -       1,452,611       44,301  
Forward exchange contracts     -       -       18,913       577       -       -       18,913       577  
Foreign currency options     -       -       5,020       153       -       -       5,020       153  
                                                                 
Non-derivative financial assets held for trading                                                                
Open-end mutual funds     573,242       17,482       -       -       -       -       573,242       17,482  
Quoted shares     37,058       1,130       -       -       -       -       37,058       1,130  
                                                                 
    $ 610,300     $ 18,612     $ 3,223,401     $ 98,305     $ -     $ -     $ 3,833,701     $ 116,917  
                                                                 
Available-for-sale financial assets                                                                
Limited partnership   $ -     $ -     $ -     $ -     $ 476,612     $ 14,535     $ 476,612     $ 14,535  
Unquoted shares     -       -       -       -       264,477       8,065       264,477       8,065  
Quoted shares     197,580       6,026       -       -       -       -       197,580       6,026  
Open-end mutual funds     16,037       489       -       -       -       -       16,037       489  
                                                                 
    $ 213,617     $ 6,515     $ -     $ -     $ 741,089     $ 22,600     $ 954,706     $ 29,115  
                                                                 
Financial liabilities at FVTPL                                                                
Derivative financial liabilities                                                                
Conversion option, redemption option and put option of convertible bonds   $ -     $ -     $ 2,632,565     $ 80,286     $ -     $ -     $ 2,632,565     $ 80,286  
Swap contracts     -       -       290,176       8,849       -       -       290,176       8,849  
Forward exchange contracts     -       -       69,207       2,111       -       -       69,207       2,111  
Foreign currency option contracts     -       -       13,659       416       -       -       13,659       416  
Interest rate swap contracts     -       -       119       4       -       -       119       4  
                                                                 
    $ -     $ -     $ 3,005,726     $ 91,666     $ -     $ -     $ 3,005,726     $ 91,666  
                                                                 

For assets and liabilities held as of December 31, 2014 and 2015 that were measured at fair value on a recurring basis, there were no transfers between Level 1 and Level 2 of the fair value hierarchy.

 

F- 81

2) Reconciliation of Level 3 fair value measurements of financial assets

 

The financial assets measured at Level 3 fair value were equity investments with no quoted prices classified as available-for-sale financial assets - non-current. Reconciliations for the years ended December 31, 2013, 2014 and 2015 were as follows:

 

    For the Years Ended December 31
    2013   2014   2015
    NT$   NT$   NT$   US$ (Note 4)
                 
Balance at January 1   $ 776,683     $ 797,162     $ 778,866     $ 23,753  
Purchases     73,358       38,793       2,010       61  
Disposals     (27,368 )     (21,012 )     (45,091 )     (1,375 )
Total gain or loss                                
In profit or loss     (106,916 )     (10,390 )     (15,891 )     (485 )
In other comprehensive income     81,405       (25,687 )     21,195       646  
                                 
Balance at December 31   $ 797,162     $ 778,866     $ 741,089     $ 22,600  

 

As of December 31, 2014 and 2015, unrealized loss of NT$21,519 thousand and NT$8,611 thousand (US$263 thousand), recorded in other comprehensive income under the heading of unrealized gain (loss) on available-for-sale financial assets, were included in the carrying amount of the financial assets at fair value on Level 3 fair value measurement.

 

3) Valuation techniques and assumptions applied for the purpose of measuring fair value

 

a) Valuation techniques and inputs applied for the purpose of measuring Level 2 fair value measurement

 

Financial Instruments   Valuation Techniques and Inputs
     
Derivatives - swap contracts, forward exchange contracts, foreign currency option contracts and interest rate swap contracts   Discounted cash flows - Future cash flows are estimated based on observable forward exchange rates or interest rates at balance sheet dates and contract forward rates or interest rates, discounted at rates that reflected the credit risk of various counterparties.
     
Derivatives - conversion option, redemption option and put option of convertible bonds   Option pricing model - Incorporation of present value techniques and reflect both the time value and the intrinsic value of options
     
Structured time deposits and private-placement convertible bonds   Discounted cash flows - Future cash flows are estimated based on observable forward exchange rates or stock prices at balance sheet dates and contract interest rate ranges or conversion prices, discounted at rates that reflected the credit risk of various counterparties.

 

b) Valuation techniques and inputs applied for the purpose of measuring Level 3 fair value measurement

 

The fair value of the Group’s investments in unquoted shares on Level 3 fair value measurement were measured using market approach based on investees’ recent financing activities, technical development, valuation of investees comparable companies, market conditions and other economic indicators.

 

F- 82

The fair values of investments in limited partnership are measured using discounted cash flow technique and a comparable multiple technique. The significant unobservable inputs used in the discounted cash flow technique were discount rates of 12.34% and the terminal growth rates of 2.50%. Any significant increase in discount rates or any significant decrease in terminal growth rates would result in a decrease in the fair value of the investments in limited partnership. The significant unobservable input used in the comparable multiple technique was EBITDA multiples of 9.73. Any significant decrease in multiples would result in a decrease in the fair value of the investments in limited partnership.

 

c. Categories of financial instruments

 

    December 31
    2014   2015
    NT$   NT$   US$ (Note 4)
             
Financial assets            
             
FVTPL            
Designated as at FVTPL   $ 2,476,550     $ 1,746,857     $ 53,274  
Held for trading     2,512,293       2,086,844       63,643  
Available-for-sale financial assets     2,474,370       954,706       29,115  
Loans and receivables (Note 1)     106,158,279       101,259,880       3,088,133  
                         
Financial liabilities                        
                         
FVTPL                        
Held for trading     2,651,352       3,005,726       91,666  
Measured at amortized cost (Note 2)     157,157,392       173,294,140       5,284,969  
                         

Note 1:     The balances included loans and receivables measured at amortized cost which comprise cash and cash equivalents, trade and other receivables and other financial assets.

 

Note 2:     The balances included financial liabilities measured at amortized cost which comprise short-term borrowings, short-term bills payable, trade and other payables, bonds payable and long-term borrowings.

 

d. Financial risk management objectives and policies

 

The derivative instruments used by the Group are to mitigate risks arising from ordinary business operations. All derivative transactions entered into by the Group are designated as either hedging or trading. Derivative transactions entered into for hedging purposes must hedge risk against fluctuations in foreign exchange rates and interest rates arising from operating activities. The currencies and the amount of derivative instruments held by the Group must match its hedged assets and liabilities denominated in foreign currencies.

 

The Group's risk management department monitors risks to mitigate risk exposures, reports unsettled position, transaction balances and related gains or losses to the Group’s chief financial officer on monthly basis.

 

1) Market risk

 

The Group’s activities exposed it primarily to the financial risks of changes in foreign currency exchange rates and interest rates. Gains or losses arising from fluctuations in foreign currency exchange rates of a variety of derivative financial instruments were approximately offset by those of hedged items. Interest rate risk was not significant due to the cost of capital was expected to be fixed.

 

F- 83

There had been no change to the Group's exposure to market risks or the manner in which these risks were managed and measured.

 

a) Foreign currency exchange rate risk

 

The Group had sales and purchases as well as financing activities denominated in foreign currency which exposed the Group to foreign currency exchange rate risk. The Group entered into a variety of derivative financial instruments to hedge foreign currency exchange rate risk to minimize the fluctuations of assets and liabilities denominated in foreign currencies.

 

The carrying amounts of the Group's foreign currency denominated monetary assets and liabilities (including those eliminated upon consolidation) as well as derivative instruments which exposed the Group to foreign currency exchange rate risk at each balance sheet date are presented in Note 36.

 

The Group was principally subject to the impact to exchange rate fluctuation in U.S. dollars and Japanese yen against NT$ or CNY. 1% is the sensitivity rate used when reporting foreign currency exchange rate risk internally to key management personnel and represents management’s assessment of the reasonably possible change in foreign currency exchange rates. The sensitivity analysis included financial assets and liabilities and inter-company receivables and payables within the Group. The changes in profit before income tax due to a 1% change in U.S. dollars and Japanese yen both against NT$ and CNY would be NT$15,000 thousand, NT$41,000 thousand and NT$18,000 thousand (US$549 thousand) for the years ended December 31, 2013, 2014 and 2015, respectively. Hedging contracts and hedged items have been taken into account while measuring the changes in profit before income tax. The abovementioned sensitivity analysis mainly focused on the foreign currency monetary items at the end of the year. As the year-end exposure did not reflect the exposure for the years ended December 31, 2013, 2014 and 2015, the abovementioned sensitivity analysis was unrepresentative of those years.

 

b) Interest rate risk

 

Except a portion of long-term borrowings and bonds payable at fixed interest rates, the Group was exposed to interest rate risk because group entities borrowed funds at floating interest rates. Changes in market interest rates will lead to variances in effective interest rates of borrowings from which the future cash flow fluctuations arise.

 

The carrying amounts of the Group's financial assets and financial liabilities with exposure to interest rates at each balance sheet date were as follows:

 

    December 31
    2014   2015
      NT$       NT$       US$ (Note 4)  
Fair value interest rate risk                        
Financial liabilities   $ 34,003,038     $ 18,030,482     $ 549,877  
                         
Cash flow interest rate risk                        
Financial assets     51,603,455       53,475,994       1,630,863  
Financial liabilities     65,149,698       65,213,083       1,988,810  

 

For assets and liabilities with floating interest rates, a 100 basis point increase or decrease was used when reporting interest rate risk internally to key management personnel. If interest rates had been 100 basis points (1%) higher or lower and all other variables held constant, the Group’s profit before income tax for the years ended December 31, 2013, 2014 and 2015 would have decreased or increased approximately by NT$323,000 thousand, NT$135,000 thousand and NT$117,000 thousand (US$3,568 thousand), respectively.

 

F- 84

c) Other price risk

 

The Group was exposed to equity or debt price risk through its investments in financial assets at FVTPL, including private-placement convertible bonds, quoted shares, and open-end mutual funds, and available-for-sale financial assets. If equity or debt prices were 1% higher or lower, profit before income tax for the years ended December 31, 2013, 2014 and 2015 would have increased or decreased approximately by NT$3,100 thousand, NT$6,800 thousand and NT$7,100 thousand (US$217 thousand), respectively, and other comprehensive income before income tax for the years ended December 31, 2013, 2014 and 2015 would have increased or decreased approximately by NT$35,000 thousand, NT$25,000 thousand and NT$10,000 thousand (US$305 thousand), respectively.

 

In addition, the Group was also exposed to the Company’s ordinary share price risk through Bonds Options recognized as financial liabilities held for trading. 7% is the sensitivity rate used when reporting price risk internally to key management personnel. If the Company’s ordinary share price increased or decreased by 7%, profit before income tax for the years ended December 31, 2013, 2014 and 2015 would have decreased approximately by NT$353,000 thousand, NT$651,000 thousand and NT$605,000 thousand (US$18,451 thousand), respectively, or increased approximately by NT$319,000 thousand, NT$608,000 thousand and NT$638,000 thousand (US$19,457 thousand), respectively.

 

2) Credit risk

 

Credit risk refers to the risk that counterparty will default on its contractual obligations resulting in financial loss to the Group. The Group’s credit risk arises from cash and cash equivalents, receivables and other financial assets. The Group’s maximum exposure to credit risk was the carrying amounts of financial assets in the consolidated balance sheets.

 

The Group dealt with counterparties creditworthy and has a credit policy and trade receivable management procedures to ensure recovery and evaluation of trade receivables. The Group’s counterparties consisted of a large number of customers and banks and there was no significant concentration of credit risk exposure.

 

3) Liquidity risk

 

The Group manages liquidity risk by maintaining adequate working capital and banking facilities to fulfill the demand for cash flow used in the Group’s operation and capital expenditure. The Group also monitors its compliance with all the loan covenants. Liquidity risk is not considered to be significant.

 

In the table below, financial liabilities with a repayment on demand clause were included in the earliest time band regardless of the probability of counter-parties choosing to exercise their rights. The maturity dates for other non-derivative financial liabilities were based on the agreed repayment dates.

 

To the extent that interest flows are floating rate, the undiscounted amounts were derived from the interest rates at each balance sheet date.

 

F- 85

   

On Demand or Less than

1 Month

  1 to 3 Months  

3 Months to

1 Year

  1 to 5 Years  

More than

5 Years

    NT$   NT$   NT$   NT$   NT$
                     
December 31, 2014                    
                     
Non-derivative financial liabilities                    
Non-interest bearing   $ 23,660,711     $ 21,370,876     $ 4,606,064     $ 155,599     $ 29,139  
Floating interest rate liabilities     21,534,220       9,003,403       12,364,453       23,870,629       175,302  
Fixed interest rate liabilities     684,039       838,234       846,899       34,458,859       -  
                                         
    $ 45,878,970     $ 31,212,513     $ 17,817,416     $ 58,485,087     $ 204,441  
                                         
December 31, 2015                                        
                                         
Non-derivative financial liabilities                                        
Non-interest bearing   $ 19,393,406     $ 19,626,026     $ 6,493,504     $ 1,926     $ 194,346  
Floating interest rate liabilities     6,617,050       5,677,129       10,582,324       39,202,454       775,273  
Fixed interest rate liabilities     16,168,484       2,463,617       24,787,238       18,078,920       -  
                                         
    $ 42,178,940     $ 27,766,772     $ 41,863,066     $ 57,283,300     $ 969,619  
                                         

   

On Demand or Less than

1 Month

  1 to 3 Months  

3 Months to

1 Year

  1 to 5 Years  

More than

5 Years

    US$ (Note 4)   US$ (Note 4)   US$ (Note 4)   US$ (Note 4)   US$ (Note 4)
December 31, 2015                    
                     
Non-derivative financial liabilities                    
Non-interest bearing   $ 591,442     $ 598,537     $ 198,033     $ 59     $ 5,927  
Floating interest rate liabilities     201,801       173,136       322,730       1,195,561       23,644  
Fixed interest rate liabilities     493,092       75,133       755,939       551,355       -  
                                         
    $ 1,286,335     $ 846,806     $ 1,276,702     $ 1,746,975     $ 29,571  

 

The amounts included above for floating interest rate instruments for non-derivative financial liabilities was subject to change if changes in floating interest rates differ from those estimates of interest rates determined at each balance sheet date.

 

The following table detailed the Group's liquidity analysis for its derivative financial instruments. The table was based on the undiscounted contractual net cash inflows and outflows on derivative instruments that settle on a net basis, and the undiscounted gross cash inflows and outflows on those derivatives that require gross settlement. When the amounts payable or receivable are not fixed, the amounts disclosed have been determined by reference to the projected interest rates as illustrated by the yield curves at each balance sheet date.

 

   

On Demand or Less than

1 Month

  1 to 3 Months  

3 Months to  

1 Year  

    NT$   NT$   NT$
             
December 31, 2014            
             
Gross settled            
Forward exchange contracts            
Inflows   $ 3,662,813     $ 1,959,573     $ 9,241  
Outflows     (3,655,279 )     (1,940,145 )     (9,331 )
      7,534       19,428       (90 )

(Continued)

 

F- 86

   

On Demand or Less than

1 Month

  1 to 3 Months  

3 Months to   1 Year

    NT$   NT$   NT$
             
Swap contracts            
Inflows   $ 10,342,259     $ 4,621,200     $ 33,399,031  
Outflows     (10,215,834 )     (4,461,118 )     (31,646,310 )
      126,425       160,082       1,752,721  
                         
    $ 133,959     $ 179,510     $ 1,752,631  
                         
December 31, 2015                        
                         
Net settled                        
Forward exchange contracts   $ (230 )   $ 3,435     $ -  
Foreign currency options   $ 2,054     $ 8,735     $ -  
                         
Gross settled                        
Forward exchange contracts                        
Inflows   $ 2,822,265     $ 2,421,602     $ -  
Outflows     (2,836,080 )     (2,429,050 )     -  
      (13,815 )     (7,448 )     -  
                         
Swap contracts                        
Inflows     16,561,521       22,476,799       36,796,825  
Outflows     (16,564,549 )     (22,007,274 )     (35,813,527 )
      (3,028 )     469,525       983,298  
                         
Interest rate swap                        
Inflows     12,603       12,466       25,069  
Outflows     (11,595 )     (11,469 )     (23,063 )
      1,008       997       2,006  
                         
    $ (15,835 )   $ 463,074     $ 985,304  

 

(Concluded)

 

   

On Demand or Less than

1 Month

  1 to 3 Months  

3 Months to  

1 Year

    US$ (Note 4)   US$ (Note 4)   US$ (Note 4)
             
December 31, 2015            
Net settled            
Forward exchange contracts   $ (7 )   $ 105     $ -  
Foreign currency options   $ 63     $ 266     $ -  

 

(Continued)

 

F- 87

   

On Demand or Less than

1 Month

  1 to 3 Months  

3 Months to

1 Year

    US$ (Note 4)   US$ (Note 4)   US$ (Note 4)
             
Gross settled            
Forward exchange contracts            
Inflows   $ 86,071     $ 73,852     $ -  
Outflows     (86,492 )     (74,079 )     -  
      (421 )     (227 )     -  
                         
Swap contracts                        
Inflows     505,079       685,477       1,122,197  
Outflows     (505,171 )     (671,158 )     (1,092,209 )
      (92 )     14,319       29,988  
                         
Interest rate swap                        
Inflows     384       380       764  
Outflows     (354 )     (350 )     (703 )
      30       30       61  
                         
    $ (483 )   $ 14,122     $ 30,049  

(Concluded)

 

32. RELATED PARTY TRANSACTIONS

 

Balances and transactions within the Group had been eliminated upon consolidation. Details of transactions between the Group and other related parties were disclosed as follows:

 

a. The Company contributed each NT$100,000 thousand (US$3,050 thousand) to ASE Cultural and Educational Foundation (the “ASE Foundation”) during 2014 and 2015, respectively, for environmental charity in promoting the related domestic environmental protection and public service activities (Note 34).

 

b. During 2013, 2014 and 2015, the Company acquired real estate from an associate at NT$1,473,905 thousand, NT$4,540,086 thousand and NT$2,466,000 thousand (US$75,206 thousand), respectively, which were primarily based on independent professional appraisal reports and fully paid.

 

c. During 2014, the construction of buildings with green design concept and other projects on current leased property for which the Company contracted with an associate has been completed with a total consideration of NT$349,646 thousand, which was primarily based on independent professional appraisal reports as well as request for quotation and price negotiation, and the payment schedule was based on the agreed acceptance progress. In addition, the Company contracted with the same associate for the construction of foreign worker dormitory on leased property. During 2015, the foreign worker dormitory has been capitalized for NT$504,600 thousand (US$15,389 thousand).

 

d. During 2014, the Company donated NT$15,000 thousand to Social Affairs Bureau of the Kaohsiung City Government through ASE Foundation to help the Kaohsiung City Government rebuild the damaged area and settle the residents who suffered or needed to be evacuated from home due to the gas explosion accident in the Qianzhen District of the Kaohsiung City.

 

F- 88

e. Compensation to key management personnel

 

    For the Years Ended December 31
    2013   2014   2015
    NT$   NT$   NT$   US$ (Note 4)
                 
Short-term employee benefits   $ 741,232     $ 989,720     $ 812,002     $ 24,764  
Post-employment benefits     4,766       4,049       3,944       120  
Share-based payments     78,701       50,327       17,937       547  
                                 
    $ 824,699     $ 1,044,096     $ 833,883     $ 25,431  
                                 

The compensation to the Company’s key management personnel is determined according to personal performance and market trends.

 

33. ASSETS PLEDGED AS COLLATERAL OR FOR SECURITY

 

In addition to Note 9, the following assets were provided as collateral for bank borrowings and the tariff guarantees of imported raw materials:

 

    December 31
    2014   2015
    NT$   NT$   US$ (Note 4)
             
Inventories related to real estate business   $ 15,164,858     $ 16,312,519     $ 497,485  
Other financial assets (including current and non-current)     268,562       229,613       7,002  
                         
    $ 15,433,420     $ 16,542,132     $ 504,487  

 

34. SIGNIFICANT CONTINGENT LIABILITIES AND UNRECOGNIZED COMMITMENTS

 

In addition to those disclosed in other notes, significant commitments and contingencies of the Group as of each balance sheet date were as follows:

 

a. Significant commitments

 

1) As of December 31, 2014 and 2015, unused letters of credit of the Group were approximately NT$137,000 thousand and NT$93,000 thousand (US$2,836 thousand), respectively.

 

2) As of December 31, 2014 and 2015, the amounts that the Group has committed to purchase property, plant and equipment were approximately NT$17,498,000 thousand and NT$8,089,200 thousand (US$246,697 thousand), respectively, of which NT$1,516,396 thousand and NT$1,756,990 thousand (US$53,583 thousand) had been prepaid, respectively.

 

3) As of December 31, 2014 and 2015, the unpaid amounts that the Group has contracted for the construction related to our real estate business were approximately NT$3,156,100 thousand and NT$2,745,400 thousand (US$83,727 thousand), respectively.

 

4) In consideration of corporate social responsibility for environmental protection, the Company’s board of directors, in December 2013, approved contributions to be made in the next 30 years, at a total amount of NT$3,000,000 thousand, at the minimum, to environmental protection efforts in Taiwan. In January 2016, the Company’s board of directors approved to contribute NT$100,000 thousand (US$3,050 thousand) to ASE Foundation for continuously implementing environmental effort in promoting the related domestic environmental protection and public service activities.

 

F- 89

b. Non-cancellable operating lease commitments

 

    December 31, 2015
    NT$   US$ (Note 4)
         
Less than 1 year   $ 211,225     $ 6,442  
1-5 years     353,470       10,780  
More than 5 years     462,733       14,112  
                 
    $ 1,027,428     $ 31,334  
                 

35. SIGNIFICANT SUBSEQUENT EVENTS

 

In January 2016, the Company issued unsecured domestic bonds in NT$7,000,000 thousand (US$213,480 thousand) with a maturity of 5 years and interest due annually with annual interest rate 1.30%, and in NT$2,000,000 thousand (US$60,994 thousand) with a maturity of 7 years and interest due annually with annual interest rate 1.50%.

 

36. SIGNIFICANT ASSETS AND LIABILITIES DENOMINATED IN FOREIGN CURRENCIES

 

The following information was aggregated by the foreign currencies other than functional currencies of the group entities and the exchange rates between foreign currencies and respective functional currencies were disclosed. The significant assets and liabilities denominated in foreign currencies were as follows:

 

   

Foreign Currencies

(In Thousand)  

  Exchange Rate  

Carrying Amount

(In Thousand)  

             
December 31, 2014            
             
Monetary financial assets            
US$   $ 3,086,749       US$1=NT$31.65     $ 97,695,606  
US$     649,271       US$1=CNY6.119       20,549,427  
JPY     3,354,008       JPY1=NT$0.2646       887,471  
JPY     8,787,236       JPY1=US$0.0084       2,325,103  
                         
Monetary financial liabilities                        
US$     2,896,001       US$1=NT$31.65       91,658,432  
US$     976,913       US$1=CNY6.119       30,919,296  
JPY     3,159,712       JPY1=NT$0.2646       836,060  
JPY     8,903,753       JPY1=US$0.0084       2,355,933  

(Continued)

 

F- 90

   

Foreign Currencies

(In Thousand)

  Exchange Rate  

Carrying Amount  

(In Thousand)  

             
December 31, 2015            
             
Monetary financial assets            
US$   $ 2,926,597       US$1=NT$32.825     $ 96,065,552  
US$     1,008,097       US$1=CNY6.4936       33,090,795  
JPY     3,380,683       JPY1=NT$0.2727       921,912  
JPY     8,467,689       JPY1=US$0.0083       2,309,139  
                         
Monetary financial liabilities                        
US$     2,988,953       US$1=NT$32.825       98,112,393  
US$     995,195       US$1=CNY6.4936       32,667,265  
JPY     3,747,333       JPY1=NT$0.2727       1,021,898  
JPY     8,775,382       JPY1=US$0.0083       2,393,047  

(Concluded)

 

The significant realized and unrealized foreign exchange gain (loss) were as follows:

 

    For the Years Ended December 31
    2013   2014   2015
Functional Currencies   Exchange Rate   Net Foreign Exchange Gain (Loss)   Exchange Rate   Net Foreign Exchange Gain (Loss)   Exchange Rate   Net Foreign Exchange Gain (Loss)
        NT$       NT$       NT$   US$ (Note 4)
                             
NT$           $ (455,820 )           $ (1,591,124 )           $ (695,510 )   $ (21,211 )
US$    

US$1

=NT$29.805

      1,203      

US$1

=NT$31.65

      298,225      

US$1

=NT$32.825

      136,795       4,172  
CNY    

CNY1

=NT$4.8885

      157,671      

CNY1

=NT$5.1724

      42,049      

CNY1 

=NT$5.0550 

      (271,358 )     (8,276 )
                                                         
            $ (296,946 )           $ (1,250,850 )           $ (830,073 )   $ (25,315 )

     
37. OTHERS

 

a) On December 20, 2013, the Kaohsiung Environmental Protection Bureau (“KEPB”) issued an official letter No. Kao-Shih-Huan-Chu-Tu-Tzu 10243758100 and an administrative sanction letter No. Kao-Shih-Huan-Chu-Shui-Chu-Tzu 30-102-120022 (“the Administrative Decision”). The Administrative Decision was to impose a fine of NT$110,065 thousand which has been recorded under the line item of other losses for the year ended December 31, 2013. On April 7, 2014, the amount of the fine was amended to NT$109,359 thousand by the KEPB. On September 4, 2015, the amount of the fine was further amended to NT$102,014 thousand (US$3,111 thousand) by the KEPB. On January 17, 2014, the Company retained lawyers to file an administrative appeal with the Kaohsiung City Government to nullify the Administrative Decision. After the administrative appeal was dismissed, the Company retained lawyers to file a lawsuit with the Kaohsiung High Administrative Court seeking to revoke the dismissal decision made by the Kaohsiung City Government (the “Administrative Appeal Decision”) and the part of the Administrative Decision pertaining to the fine, and to demand a refund of the fine paid by the Company. The judgment of the Kaohsiung High Administrative Court was rendered on March 22, 2016, ruling to revoke the Administrative Appeal Decision and the Administrative Decision pertaining to the fine, and to dismiss the other complaint filed by the Company (i.e., to demand a refund of the fine paid by the Company). On April 14, 2016, the Company appealed against the unfavorable ruling to the Supreme Administrative Court. Meanwhile, owing to the event above, on January 3, 2014, the Kaohsiung District Prosecutors Office charged the Company with violation of the Waste Disposal Act. The Kaohsiung District Court handed down the judgment on October 20, 2014 and the Company was fined NT$3,000 thousand for violation of Article 47 of the Waste Disposal Act and has been recorded under the line item of other gains and losses for the year ended December 31, 2014. Then the Company appealed against the judgment to the Kaohsiung Branch of Taiwan High Court. On September 29, 2015, the Kaohsiung Branch of Taiwan High Court rendered a final judgment of finding the Company not guilty of the criminal charge.

 

F- 91

b) In November 2015, the Company received a legal brief made by SPIL in connection with a lawsuit brought by SPIL against the Company which was filed with Kaohsiung District Court. SPIL filed the civil lawsuit against the Company seeking to confirm that Company does not have the right to request SPIL to register it as a shareholder in SPIL’s shareholder register. The Company has engaged attorney to defend this case and will submit defense brief to the court to protect the Company’s interest. The Kaohsiung District Court has scheduled a hearing on this case on April 29, 2016. The Company does not expect the lawsuit to have material impact on the financial position and business operation of the Company.

 

38. OPERATING SEGMENTS INFORMATION

 

The Group has the following reportable segments: Packaging, Testing and EMS. The Group provides services in packaging bare semiconductors into finished semiconductors with enhanced electrical and thermal characteristics, as well as testing services, including front-end engineering testing, wafer probing and final testing services; the Group also sells goods from electronics manufacturing services (“EMS”). Information about other business activities and operating segments that are not reportable are combined and disclosed in “Others.” The Group engages in other activities such as substrate production and real estate business.

 

The accounting policies for segments are the same as those described in Note 4. The measurement basis for resources allocation and performance evaluation is based on profit before income tax.

 

Segment information for the years ended December 31, 2013, 2014 and 2015 was as follows:

 

a. Segment revenues and results

 

    Packaging   Testing   EMS   Others   Total
    NT$   NT$   NT$   NT$   NT$
                     
For the year ended December 31, 2013                    
                     
Revenue from external customers   $ 112,603,927     $ 24,732,197     $ 78,530,594     $ 3,995,728     $ 219,862,446  
Inter-segment revenues (Note)     3,337,074       246,223       42,960,432       8,048,827       54,592,556  
Segment revenues     115,941,001       24,978,420       121,491,026       12,044,555       274,455,002  
Interest income     74,171       11,958       85,491       41,181       212,801  
Interest expense     (1,542,047 )     (44,167 )     (96,620 )     (574,310 )     (2,257,144 )
Depreciation and amortization     (16,412,763 )     (6,293,170 )     (1,658,743 )     (1,106,235 )     (25,470,911 )
Share of the profit of associates     22,039       -       -       -       22,039  
Impairment loss     (344,150 )     (115,966 )     (99,843 )     (131,913 )     (691,872 )
Segment profit before income tax     9,975,902       6,321,022       2,928,223       144,609       19,369,756  
Expenditures for segment assets     18,648,304       6,068,085       1,224,698       1,102,985       27,044,072  
                                         
December 31, 2013                                        
                                         
Investments accounted for using the equity method     1,205,158       -       -       -       1,205,158  
Segment assets     146,160,484       44,100,564       55,112,632       41,348,403       286,722,083  
                                         
For the year ended December 31, 2014                                        
                                         
Revenue from external customers     121,336,453       25,874,694       105,784,427       3,595,873       256,591,447  
Inter-segment revenues (Note)     9,418,359       177,793       48,596,814       8,437,439       66,630,405  
Segment revenues     130,754,812       26,052,487       154,381,241       12,033,312       323,221,852  
Interest income     96,737       10,245       116,451       20,041       243,474  
Interest expense     (1,566,595 )     (15,663 )     (155,702 )     (586,466 )     (2,324,426 )
Depreciation and amortization     (17,533,267 )     (6,160,378 )     (1,435,509 )     (1,221,622 )     (26,350,776 )
Share of the profit of associates     (121,882 )     -       -       -       (121,882 )
Impairment loss     (231,936 )     (4,701 )     (10,390 )     (61,117 )     (308,144 )
Segment profit before income tax     17,279,239       6,800,894       3,818,393       636,529       28,535,055  
Expenditures for segment assets     29,863,337       6,157,154       6,562,513       865,583       43,448,587  

(Continued)

 

F- 92

    Packaging   Testing   EMS   Others   Total
    NT$   NT$   NT$   NT$   NT$
                     
December 31, 2014                    
                     
Investments accounted for using the equity method   $ 1,468,242     $ -     $ -     $ -     $ 1,468,242  
Segment assets     166,359,949       44,147,813       78,865,897       44,345,158       333,718,817  
                                         
For the year ended December 31, 2015                                        
                                         
Revenue from external customers     116,607,314       25,191,916       138,242,100       3,261,206       283,302,536  
Inter-segment revenues (Note)     9,454,671       191,608       58,451,996       7,659,282       75,757,557  
Segment revenues     126,061,985       25,383,524       196,694,096       10,920,488       359,060,093  
Interest income     53,235       12,536       149,385       26,928       242,084  
Interest expense     (1,520,118 )     (5,821 )     (147,792 )     (595,055 )     (2,268,786 )
Depreciation and amortization     (18,946,460 )     (6,516,912 )     (2,738,722 )     (1,316,570 )     (29,518,664 )
Share of the profit of associates and joint ventures     407,622       -       -       -       407,622  
Impairment loss     (139,397 )     -       (102,389 )     (16,343 )     (258,129 )
Segment profit before income tax     15,761,225       6,354,140       2,874,944       302,836       25,293,145  
Expenditures for segment assets     19,691,068       4,754,481       2,917,939       917,333       28,280,821  
                                         
December 31, 2015                                        
                                         
Investments accounted for using the equity method     37,403,601       -       -       -       37,403,601  
Segment assets     193,604,661       42,652,569       79,997,341       49,013,678       365,268,249  

(Concluded)

 

    Packaging   Testing   EMS   Others   Total
    US$ (Note 4)   US$ (Note 4)   US$ (Note 4)   US$ (Note 4)   US$ (Note 4)
                     
For the year ended December 31, 2015                    
                     
Revenue from external customers   $ 3,556,185     $ 768,280     $ 4,215,984     $ 99,457     $ 8,639,906  
Inter-segment revenues (Note)     288,340       5,843       1,782,617       233,586       2,310,386  
Segment revenues     3,844,525       774,123       5,998,601       333,043       10,950,292  
Interest income     1,624       382       4,556       821       7,383  
Interest expense     (46,359 )     (178 )     (4,507 )     (18,148 )     (69,192 )
Depreciation and amortization     (577,812 )     (198,747 )     (83,523 )     (40,152 )     (900,234 )
Share of the profit of associates and joint ventures     12,431       -       -       -       12,431  
Impairment loss     (4,251 )     -       (3,123 )     (498 )     (7,872 )
Segment profit before income tax     480,672       193,783       87,677       9,235       771,367  
Expenditures for segment assets     600,521       144,998       88,989       27,975       862,483  
                                         
December 31, 2015                                        
                                         
Investments accounted for using the equity method     1,140,701       -       -       -       1,140,701  
Segment assets     5,904,381       1,300,780       2,439,687       1,494,775       11,139,623  

     
Note: Inter-segment revenues were eliminated upon consolidation.

 

b. Revenue from major products and services

 

    For the Years Ended December 31
    2013   2014   2015
    NT$   NT$   NT$   US$
(Note 4)
                 
Advanced packaging and IC wirebonding service   $ 100,457,184     $ 108,384,405     $ 103,735,586     $ 3,163,635  
Wafer probing and final testing service     24,120,370       25,116,026       24,136,399       736,090  
Electronic components manufacturing service     77,731,347       104,904,455       137,347,359       4,188,696  
Others     17,553,545       18,186,561       18,083,192       551,485  
                                 
    $ 219,862,446     $ 256,591,447     $ 283,302,536     $ 8,639,906  

F- 93

c. Geographical information

 

Geographical information about revenue from external customers and noncurrent assets are reported based on the country where the external customers are headquartered and noncurrent assets are located.

 

1) Net revenues from external customers

 

    For the Years Ended December 31
    2013   2014   2015
    NT$   NT$   NT$   US$ (Note 4)
                 
United States   $ 143,753,891     $ 173,912,974     $ 205,730,670     $ 6,274,189  
Taiwan     31,277,147       36,747,699       32,631,149       995,155  
Asia     23,779,212       24,042,586       22,885,128       697,930  
Europe     20,392,268       20,826,125       20,577,069       627,541  
Others     659,928       1,062,063       1,478,520       45,091  
                                 
    $ 219,862,446     $ 256,591,447     $ 283,302,536     $ 8,639,906  

     
2) Noncurrent assets, excluding financial instruments, post-employment benefit assets and deferred tax assets

 

    December 31
    2014   2015
    NT$   NT$   US$ (Note 4)
             
Taiwan   $ 97,159,564     $ 98,849,362     $ 3,014,619  
China     43,384,186       40,385,484       1,231,640  
Others     26,177,965       25,458,503       776,412  
                         
    $ 166,721,715     $ 164,693,349     $ 5,022,671  

     
d. Major customers

 

Except one customer from which the operating revenues generated from packaging and EMS segments was NT$32,588,464 thousand, NT$54,431,222 thousand and NT$88,311,697 thousand (US$2,693,251 thousand) in 2013, 2014 and 2015, respectively, the Group did not have other single customer to which the operating revenues exceeded 10% of operating revenues for the years ended December 31, 2013, 2014 and 2015.

 

F- 94

 

 

 

 

 

 

 

 

 

 

 

 

ASE Technology (NYSE:ASX)
Historical Stock Chart
From Mar 2024 to Apr 2024 Click Here for more ASE Technology Charts.
ASE Technology (NYSE:ASX)
Historical Stock Chart
From Apr 2023 to Apr 2024 Click Here for more ASE Technology Charts.